Manual Bosch 36614

48 pages 6.83 mb
Download

Go to site of 48

Summary
  • Bosch 36614 - page 1

    IMPOR T ANT : IMPOR T ANT : IMPOR T ANT E: Read Before Using Lire avant usage Leer antes de usar For English Version Version française Versión en español See page 2 Voir page 17 Ver la página 32 Operating/Safety Instructions Consignes de fonctionnement/sécurité Instrucciones de funcionamiento y seguridad 1-877-BOSCH99 (1-877-267-2499) www .b ...

  • Bosch 36614 - page 2

    -2 - Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Keep children and bystanders away while operating a power tool. Distraction ...

  • Bosch 36614 - page 3

    -3- Keep handles dry, clean and free from oil and grease. Slippery hands cannot safely control the power tool. Power tool use and care Do not force the power tool. Use the corre ct p ower tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch ...

  • Bosch 36614 - page 4

    -4- Hold power tools by insulated gripping surfaces when performing an operation where the cutting tools may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator. Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work b ...

  • Bosch 36614 - page 5

    Battery/Charger Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery pack, and (3) product using battery. Use only the charger which accompanied your product or direct replacement as listed in the catalog or this manual. Do not substitute any other charger. Use only Bosch approved chargers ...

  • Bosch 36614 - page 6

    -6- Do not attempt to disas- semble the battery or remove any component projecting from the battery terminals. Fire or injury may result. P rior to disposal, protect exposed terminals w ith heavy insulating tape to prevent shorting. LITHIUM-ION BATTERIES If equipped with a lithium-ion battery, the battery must be collected, recycled or disposed of ...

  • Bosch 36614 - page 7

    -7- I MPORTANT: S ome of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. Symbol Name Designation/Explanation V Volts Voltage (potential) A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power kg Kilog ...

  • Bosch 36614 - page 8

    -8- Functional Description and Specifications Disconnect battery pack from tool before making any assembly, adjustments or changing accessories . Such preventive safety measures reduce the risk of starting the tool accidentally. ! WARNING Cordless Drill/Driver FIG. 1 BATTERY PACK VENTILATION OPENINGS GEAR SHIFTER RUBBERIZED GRIP BIT STORAGE AREA KE ...

  • Bosch 36614 - page 9

    -9- Assembly Disconnect battery pack from tool before making any assembly, adjustments or changing accessories . Such preventive safety measures reduce the risk of starting the tool accidentally. INSERTING BITS Move reverse switch lever to the center “OFF” position. Remove battery pack and rotate the clutch ring to the drill bit symbol “ ”. ...

  • Bosch 36614 - page 10

    Set Forward/Reversing lever to the center (off position). Slide charged battery pack into the housing until the battery pack locks into position (Fig. 7). Your tool is equipped with a secondary locking latch to prevent the battery pack from completely falling out of the handle, should it become loose due to vibration. GEAR SHIFTING Your tool is equ ...

  • Bosch 36614 - page 11

    If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet. If the green indicator light is “ON”, the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged. If the green indicator light is “BLINKING”, the battery pack is being fast-charged. Fast-charging will ...

  • Bosch 36614 - page 12

    -12- Plug charger cord into your standard power outlet. With no battery pack inserted, the charger’s green indicator light will go ON. This indicates the charger is receiving power and the charger is ready for operation. When you insert the battery pack into the charger. The charger’s green indicator light will begin to “BLINK”. This indica ...

  • Bosch 36614 - page 13

    -13- CHARGER INDICATORS, SYMBOLS AND MEANING (Model BC660) If the indicator lights are “OFF”, the charger is not receiving power from power supply outlet. If the green indicator light is “ON”, the charger is plugged in but the battery pack is not inserted, or the battery pack is fully charged, or the battery pack is too hot or cold for fast ...

  • Bosch 36614 - page 14

    DRILL BITS Always inspect drill bits for excessive wear. Use only bits that are sharp and in good condition. TWIST BITS: Available with straight and reduced shanks for wood and light duty metal drilling. High speed bits cut faster and last longer on hard materials. CARBIDE TIPPED BITS: Used for drilling stone, concrete, plaster, cement and other un ...

  • Bosch 36614 - page 15

    -15- Before using an accessory, be certain that its maximum safe operating speed is not exceeded by the nameplate speed of the tool. Do not exceed the recommended wheel diameter. SANDING AND POLISHING Fine sanding and polishing require “touch”. Select the most efficient speed. When using polishing bonnets, always be sure the excess string that ...

  • Bosch 36614 - page 16

    -16- Service NO USER SERVICEABLE PARTS INSIDE. Preventive maintenance performed by unauthorized personnel may result in misplacing of internal wires and components which could cause serious hazard. We recom- mend that all tool service be performed by a Bosch Factory Service Center or Authorized Bosch Service Station. SERVICEMEN: Disconnect tool and ...

  • Bosch 36614 - page 17

    -17- Sécurité du lieu de travail Maintenez le lieu de travail propre et bien éclairé. Les risques d’accident sont plus élevés quand on travaille dans un endroit encombré ou sombre. N’utilisez pas d’outils électroportatifs dans des atmosphères explosives, comme par exemple en présence de gaz, de poussières ou de liquides inflammable ...

  • Bosch 36614 - page 18

    -18- Les vêtements amples, les bijoux ou les cheveux longs r isquent d’être happés par les pièces en mouvement. Si l’outil est muni de dispositifs permettant le raccordement d’un système d’aspiration et de collecte des poussières, assurez-vous que ces dispositifs sont raccordés et utilisés correctement. L'utilisation d'un ...

  • Bosch 36614 - page 19

    -19- Tenez les outils électroportatifs par les surfaces isolées de préhension en exécutant une opération au cours de laquelle les outils de coupe peuvent venir en contact avec les fils cachés. Le contact avec un fil sous tension rendra les pièces métalliques exposées de l'outil sous tension et causera des chocs à l'opérateur. U ...

  • Bosch 36614 - page 20

    Entretien des piles -20- Avant d'utiliser le chargeur de pile, lisez toutes les consignes et tous les marquages d'avertissement sur (1) le chargeur de pile, (2) le bloc-piles et (3) le produit utilisant la pile. N'utilisez que le chargeur qui accompagnait votre produit ou remplacement direct, comme indiqué dans le catalogue ou ce ma ...

  • Bosch 36614 - page 21

    -21- Ne tentez pas de désassembler le bloc-piles ou d’enlever tout composant faisant saillie des bornes de piles, ce qui peut provoquer un incendie ou des blessures. Avant la mise au rebut, protégez les bornes exposées à l’aide d’un ruban isolant épais pour prévenir le court-circuitage. PILES LITHIUM-ION Si le produit est équipé d&apo ...

  • Bosch 36614 - page 22

    -22- Symboles IMPORTANT : Certains des symboles suivants peuvent être utilisés sur votre outil. Veuillez les étudier et apprendre leur signification. Une interprétation appropriée de ces symboles vous permettra d'utiliser l'outil de façon plus efficace et plus sûre. Symbole Nom Désignation/Explication V Volts Tension (potentielle) ...

  • Bosch 36614 - page 23

    Numéro de modèle 36614 36618 Tension nominale 14,4 V 18 V Régime à vide 1 n 0 0-450/min n 0 0-500/min Régime à vide 2 n 0 0-1 450/min n 0 0-1 600/min Capacités maximales Dimension de mandrin 13 m m 13 mm Taille s de vis #16 x 76 mm #16 x 76 mm Métal doux 13 mm 13 m m Bois dur 38 mm 38 mm Bois tendre 51 mm 51 mm Bloc piles BAT607 et BAT614 B ...

  • Bosch 36614 - page 24

    -24- Assemblage Débranchez le bloc-piles de l'outil avant d'effectuer tout assemblage ou réglage, ou de changer des accessoires. Ces mesures de sécurité préventives réduisent le risque d'une mise en marche accidentelle de l'outil. INSERTION DES FORETS Placez le levier inverseur de marche à la position centrale « OFF ». ...

  • Bosch 36614 - page 25

    Mettez le levier de marche avant/arrière au centre (en position d'arrêt). Faites glisser le bloc-piles chargé dans le bâti jusqu’à ce que le bloc-piles se bloque en position (Fig. 7). Votre outil est muni d’un loquet de verrouillage secondaire qui empêche le bloc-piles de se séparer complètement de la poignée et de tomber au cas o ...

  • Bosch 36614 - page 26

    -26- Pour retirer le bloc-piles, appuyez sur le bouton de déclenchement du bloc-piles et faites glisser le bloc- piles vers l’avant. Appuyez une fois de plus sur le bouton de déclenchement du bloc-piles et faites glisser le bloc- piles jusqu’à ce qu’il sorte complètement du bâti de l’outil (Fig. 7). FIG. 7 REMARQUES IMPORTANTES CONCERN ...

  • Bosch 36614 - page 27

    -27- Branchez le cordon du chargeur dans votre prise de courant standard. Si le bloc-piles n'est pas inséré, le voyant lumineux vert du chargeur s'allumera. Ceci indique que le chargeur est sous tension et qu'il est prêt à fonctionner. Lorsque vous insérerez le bloc-piles dans le chargeur, le voyant lumineux vert du chargeur com ...

  • Bosch 36614 - page 28

    -28- TÉMOINS, SYMBOLES ET SIGNIFICATION (Mod èle B C660) Si le témoin lumineux vert est éteint, ceci signifie que le chargeur ne reçoit pas de courant de la prise de courant. Si le voyant vert s’allume, le chargeur est branché mais le bloc- piles n’est pas en place ou le bloc- piles est pleinement chargé, ou le bloc-piles est trop chaud ...

  • Bosch 36614 - page 29

    Consignes de fonctionnement FIXATION À L’AIDE DE VIS La procédure illustrée à la (Fig. 10) vous permettra de fixer des matériaux ensemble à l’aide de votre perceuse/tournevis sans cordon sans dénuder, fendre ni séparer le matériau. Fixez d’abord les pièces ensemble à l’aide d’une bride, et percez le premier trou aux 2/3 du diam ...

  • Bosch 36614 - page 30

    -30- fréquemment pour enlever les copeaux sur les cannelures. Utilisez un bloc d’appui en bois pour les matériaux sus- ceptibles de voler en éclats tels que les matériaux minces. Vous percerez un trou plus net si vous relâchez la pression immédiatement avant que le foret ne traverse le bois. Terminez ensuite le trou à l’arrière. PERÇAG ...

  • Bosch 36614 - page 31

    -31- Service IL N’EXISTE À L’INTÉRIEUR AUCUNE PIÈCE SUSCEPTIBLE D’ÊTRE ENTRETENUE PAR L’UTILISATEUR. L’entretien préventif exécuté par des personnes non autorisés peut entraîner un positionnement erroné des composants et des fils internes, ce qui peut présenter de graves dangers. Nous recommandons de confier toute intervention ...

  • Bosch 36614 - page 32

    -32- Seguridad del área de trabajo Mantenga el área de trabajo limpia y bien iluminada. Las áreas desordenadas u oscuras invitan a que se produzcan accidentes. No utilice herramientas mecánicas en atmósferas explosivas, como por ejemplo en presencia de líquidos, gases o polvos inflamables. Las herramientas mecánicas generan chispas que puede ...

  • Bosch 36614 - page 33

    -33- Vístase adecuadamente. No use ropa holgada ni alhajas holgadas. Mantenga el pelo, la ropa y los guantes alejados de las piezas móviles. La ropa holgada, las alhajas holgadas o el pelo largo pueden quedar atrapados en las piezas móviles. Si se proporcionan dispositivos para la conexión de instalaciones de extracción y recolección de polvo ...

  • Bosch 36614 - page 34

    -34- Sujete las herramientas mecánicas por las superficies de agarre aisladas cuando realice una operación en la que las herramientas de corte puedan entrar en contacto con cables ocultos. El contacto con un cable que tenga corriente hará que ésta pase a las partes metálicas descubiertas de la herramienta y que el operador reciba sacudidas el? ...

  • Bosch 36614 - page 35

    Cuidado de las baterías Antes de utilizar el cargador de baterías, lea todas las instrucciones e indicaciones de precaución que se encuentran en (1) el cargador de baterías, (2) el paquete de baterías y (3) el producto que utiliza baterías. Utilice solamente el cargador que acompañaba al el producto o un reemplazo directo según se indica en ...

  • Bosch 36614 - page 36

    -36- No intente desarmar la batería ni quitar ninguno de los com- ponentes que sobresalen de las terminales de la batería. Se pueden producir lesiones o un incendio. Antes de tirarla, proteja las terminales que están al descubierto con cinta adhesiva aislante gruesa para prevenir cortocircuitos. BATERÍAS DE IONES DE LITIO Si este producto está ...

  • Bosch 36614 - page 37

    -37- Símbolos IMPORTANTE: Es posible que algunos de los símbolos siguientes se usen en su herramienta. Por favor, estúdielos y aprenda su significado. La interpretación adecuada de estos símbolos le permitirá utilizar la herramienta mejor y con más seguridad. Símbolo Nombre Designación/explicación V Volt Tensión (potencial) A Ampere Corr ...

  • Bosch 36614 - page 38

    Descripción funcional y especificaciones Desconecte el paquete de batería de la herramienta antes de realizar cualquier ensamblaje, ajuste o cambio de accesorios. Dichas medidas preventivas de seguridad reducen el riesgo de arrancar la herramienta accidentalmente. ADVERTENCIA ! T aladro/destornillador sin cordón - 38 - Número de modelo 36614 36 ...

  • Bosch 36614 - page 39

    -39- Desconecte el paquete de batería de la herramienta antes de realizar cualquier ensamblaje, ajuste o cambio de accesorios. Dichas medidas preventivas de seguridad reducen el riesgo de arrancar la herramienta accidentalmente. COLOCACION DE LAS BROCAS Mueva la palanca del interruptor de inversión hacia la posición central “OFF” (desconecta ...

  • Bosch 36614 - page 40

    PALANCA DE AVANCE/INVERSIÓN Y CIERRE DEL GATILLO Después de utilizar la herramienta, fije el gatillo en la posición de apagado ("OFF") para ayudar a evitar los arranques accidentales y la descarga accidental de las baterías. La herramienta está equipada con una palanca de avance/inversión y un cierre del gatillo con ubicac ión enci ...

  • Bosch 36614 - page 41

    -41- Para quitar el paquete de baterías, oprima el botón de liberación del paquete de baterías y deslice dicho paquete hacia delante. Oprima de nuevo el botón de liberación del paquete de baterías y deslice dicho paquete completamente hacia afuera hasta sacarlo de la carcasa de la herramienta (Fig. 7). FIG. 7 1. El cargador fue diseñado par ...

  • Bosch 36614 - page 42

    Enchufe el cordón del cargador en un tomacorriente eléctrico estándar. Si no hay un paquete de baterías insertado, la luz indicadora verde del cargador se ENCENDERÁ. Esto indica que el cargador está recibiendo energía eléctrica y que está listo para utilizarse. Cuando introduzca el paquete de baterías en el cargador, la luz indicadora ver ...

  • Bosch 36614 - page 43

    -43- INDICADORES, SIMBOLOS Y SIGNIFICADO (Mod elo BC6 60) Si la luz indicadora verde está apagada, el cargador no está recibiendo energía del tomacorriente de alimentación. Si la luz indicadora verde está “ENCENDIDA”, el cargador está enchufado pero el paquete de baterías no está introducido, o el paquete de baterías se encuentra total ...

  • Bosch 36614 - page 44

    -44- Consejos de funcionamiento Usted prolongará la vida de las brocas y realizará un trabajo mejor ejecutado si siempre pone la broca en contacto con la pieza de trabajo antes de apretar el gatillo. Durante el funcionamiento, sujete firmemente la herramienta y ejerza una presión ligera y uniforme. Una presión excesiva a baja velocidad hará qu ...

  • Bosch 36614 - page 45

    Antes de utilizar un accesorio, asegúrese de que la velocidad especificada en la placa del fabricante de la herramienta no exceda la velocidad máxima de funcionamiento con seguridad de dicho accesorio. No exceda el diámetro de rueda recomendado. LIJADO Y PULIDO El lijado fino y el pulido requieren “toque”. Seleccione la velocidad más eficaz ...

  • Bosch 36614 - page 46

    -46- Servicio NO HAY PIEZAS EN EL INTERIOR QUE PUEDAN SER AJUSTADAS O REPARADAS POR EL USUARIO. El mantenimiento preventivo realizado por personal no autorizado pude dar lugar a la colocación incorrecta de cables y componentes internos que podría constituir un peligro serio. Recomendamos que todo el servicio de las herramientas sea realizado en u ...

  • Bosch 36614 - page 47

    -47- Notes: Remarques : Notas: BM 2610956386 07-08 7/1/08 1:25 PM Page 47 ...

  • Bosch 36614 - page 48

    2610956386 07/08 Printed in U.S.A. L IMITED WARRANTY OF BOSCH PORTABLE AND BENCHTOP POWER TOOLS Robert Bosch Tool Corporation (“Seller”) warrants to the original purchaser only, that all BOSCH portable and benchtop power tools will be free from defects in material or workmanship for a period of one year from date of purchase. SELLER’S SOLE OB ...

Manufacturer Bosch Category Drill

Documents that we receive from a manufacturer of a Bosch 36614 can be divided into several groups. They are, among others:
- Bosch technical drawings
- 36614 manuals
- Bosch product data sheets
- information booklets
- or energy labels Bosch 36614
All of them are important, but the most important information from the point of view of use of the device are in the user manual Bosch 36614.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Bosch 36614, service manual, brief instructions and user manuals Bosch 36614. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Bosch 36614.

Similar manuals

A complete manual for the device Bosch 36614, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Bosch 36614 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Bosch 36614.

A complete Bosch manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Bosch 36614 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Bosch 36614, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Bosch 36614, that we can find in the current document
3. Tips how to use the basic functions of the device Bosch 36614 - which should help us in our first steps of using Bosch 36614
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Bosch 36614
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Bosch 36614 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Bosch 36614?

Use the form below

If you did not solve your problem by using a manual Bosch 36614, ask a question using the form below. If a user had a similar problem with Bosch 36614 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)