English dropdown-ico

Manual Charnwood WOODBURNER

7 pages 0.22 mb
Download

Go to site of 7

Summary
  • Charnwood WOODBURNER - page 1

    Operating and Installation Instructions CHARNWOOD COUNTRY 8 & 12 WOODBURNER Bishops Way, Newport, Isle Of Wight, PO3O 5WS, U.K. Tel: (01983) 527552 Fax: (01983) 821267 ...

  • Charnwood WOODBURNER - page 2

    Before lighting the stove check with the installer that the work and checks described in the Installation Instructions have been carried out correctly and that the chimney has been swept, is sound and free from any obstructions. FUELS Wood Wood must be dry and well seasoned. Ideally it should be cut, split and stacked under cover for at least a yea ...

  • Charnwood WOODBURNER - page 3

    open for long periods as this can cause over-firing. For overnight burning they should be closed. The airwash control is used most of the time to control the burning rate and to keep the glass clean. Fully extended gives full airwash for faster burning and clean glass whereas fully closed gives slow overnight burning. It will not be possible to kee ...

  • Charnwood WOODBURNER - page 4

    swept from the plate and into the fire. Return the throat plate to its correct position - raise the front of the plate, push it back and then lower it onto the retaining lugs. CHIMNEY SWEEPING The chimney should be swept at least twice a year. Where the top outlet or vertical rear flue connector is used it will generally be possible to sweep the ch ...

  • Charnwood WOODBURNER - page 5

    regulations state that the hearth must extend in front of the stove by at least 300mm (12 inches) and to the sides of the stove by at least 150mm (6 inches). If in doubt as to the positioning of the stove expert advice should be sought either from the supplier or the local building inspector. The fireplace must allow good circulation of air around ...

  • Charnwood WOODBURNER - page 6

    FITTING THE OPTIONAL ADD-IN BOILER The boiler replaces the rear firebrick. Before fitting the boiler, remove the front fence, the throat plate and the rear firebrick. Knock out the knock-outs for the boiler tappings in the back of the firebox. Remove the back nuts and washers supplied with the boiler and fit the boiler into the appliance. Place the ...

  • Charnwood WOODBURNER - page 7

    chimney to be swept through the stove. Soot doors may either be in the actual brickwork of the chimney or in the register plate. Various positions of soot doors are shown in Figs. 4 to 7. PRE LIGHTING CHECK Ensure that the throat plate is fitted in the roof of the appliance. The location and positioning of the throat plate is shown in Fig. 2. Befor ...

Manufacturer Charnwood Category Stove

Documents that we receive from a manufacturer of a Charnwood WOODBURNER can be divided into several groups. They are, among others:
- Charnwood technical drawings
- WOODBURNER manuals
- Charnwood product data sheets
- information booklets
- or energy labels Charnwood WOODBURNER
All of them are important, but the most important information from the point of view of use of the device are in the user manual Charnwood WOODBURNER.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Charnwood WOODBURNER, service manual, brief instructions and user manuals Charnwood WOODBURNER. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Charnwood WOODBURNER.

Similar manuals

A complete manual for the device Charnwood WOODBURNER, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Charnwood WOODBURNER by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Charnwood WOODBURNER.

A complete Charnwood manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Charnwood WOODBURNER - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Charnwood WOODBURNER, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Charnwood WOODBURNER, that we can find in the current document
3. Tips how to use the basic functions of the device Charnwood WOODBURNER - which should help us in our first steps of using Charnwood WOODBURNER
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Charnwood WOODBURNER
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Charnwood WOODBURNER in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Charnwood WOODBURNER?

Use the form below

If you did not solve your problem by using a manual Charnwood WOODBURNER, ask a question using the form below. If a user had a similar problem with Charnwood WOODBURNER it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)