Manual Tripp Lite TE Series

20 pages 0.73 mb
Download

Go to site of 20

Summary
  • Tripp Lite TE Series - page 1

    1 1111 W. 35th Street Chicago, IL 60609 USA Customer Support: (773) 869-1234 www.tripplite.com Copyright ©2001 Tripp Lite. All rights reserved. Owner's Manual TE Series Line-Interactive UPS Systems (120V) ESP AÑOL: p. 7 FRANÇAIS: p. 14 Quic k Installation: p. 3 Basic Operation: p. 4-5 Storage & Service: p. 6 Specifications: p . 6 Import ...

  • Tripp Lite TE Series - page 2

    2 This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite UPS Systems. SAVE THESE INSTRUCTIONS. UPS Location W arnings • Install your UPS indoors, away from excess moisture or heat, dust or direct sunlight. • For best performance, keep the indoor temperatu ...

  • Tripp Lite TE Series - page 3

    3 Quick Installation Plug your UPS into an electrical outlet. Plug your computer , monitor and external modem into your UPS's battery-supported outlets. *Your UPS is designed to support only computer equipment. You will overload your UPS if you connect devices with high power draws (such as some household appliances, laser printers and surge s ...

  • Tripp Lite TE Series - page 4

    4 Basic Operation OFF ON Switches With your UPS plugged in, set this switch according to the recommendations in Step 3 of the Quick Installation section. “ON” Position Function: ENABLES battery backup. UPS Conditions: The UPS battery is charging. Power is ON at the UPS receptacles. The “ ” indicator light is illuminated. Setting Advantages: ...

  • Tripp Lite TE Series - page 5

    5 Indicator Lights All Indicator Light descriptions apply when the UPS is plugged into a wall outlet and turned on. This green light will turn ON whenever your UPS is plugged in and receiving normal AC line power. This red light will turn ON when your UPS is providing your equipment with battery power. This yellow light will turn ON continuously af ...

  • Tripp Lite TE Series - page 6

    6 Storage & Service Storage First turn your UPS OFF and disconnect its power cord from the wall outlet. Then disconnect all equipment to avoid battery drain. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charg ...

  • Tripp Lite TE Series - page 7

    7 1111 W. 35th Street Chicago, IL 60609 USA Atención al cliente (EE.UU.): (773) 869-1234 www.tripplite.com ©2001 Tripp Lite. Reservados todos los derechos. Manual de Operación Línea TE No-break / Sistema UPS Interactivo (120V) Instalación Rápida: p. 9 Operación Básica: p. 10-12 Almacenaje y Servicio: p. 13 Especificaciones: p . 13 Seguridad ...

  • Tripp Lite TE Series - page 8

    8 Este manual contiene advertencias e instrucciones importantes que deben seguirse durante la instalación, operación y almacenaje de todos los no-breaks / sistemas UPS Tripp Lite. GUARDE ESTAS INSTRUCCIONES. Advertencias Sobre la Instalación • Instale este no-break / sistema UPS bajo techo, alejado de calor o humedad excesiva, polvo o luz sola ...

  • Tripp Lite TE Series - page 9

    9 Instalación Rápida Conecte el no-break / sistema UPS a una toma de energía eléctrica. Conecte su computadora, monitor y módem externo a los enchufes adecuados del no- break / sistema UPS. *Este no-break / sistema UPS ha sido diseñado para respaldar equipos de computación solamente. El no-break / sistema UPS se sobrecargará si conecta disp ...

  • Tripp Lite TE Series - page 10

    10 Interruptores Con el no-break / sistema UPS conectado a una toma eléctrica, coloque este interruptor en la posición deseada de acuerdo con las recomendaciones especificadas en el Paso 3 de la sección “Instalación Rápida”. Posición “ON” (encendido) Función: ACTIVA el respaldo a batería. Condiciones del no- break / sistema UPS: Las ...

  • Tripp Lite TE Series - page 11

    11 Luces Indicadoras Todas las descripciones de las luces indicadoras son válidas mientras el no-break / sistema UPS esté encendido y conectado a una toma de energía eléctrica. Esta luz verde se enciende cuando el no-break / sistema UPS está conectado a una toma de energía eléctrica y recibiendo energía normal de CA. Esta luz roja se encien ...

  • Tripp Lite TE Series - page 12

    12 Otras Características de este no-break / Sistema UPS Receptáculos de CA Los receptáculos de su no-break / sistema UPS suministran energía de CA al equipo conectado durante condiciones normales de operación y energía de batería durante apagones y bajas de voltaje. También protegen a sus equipos contra picos de tensión peligrosos y ruidos ...

  • Tripp Lite TE Series - page 13

    13 Almacenaje y Servicio Almacenaje Primero, apague el no-break / sistema UPS y desconecte su cable de la toma de la energía eléctrica. Después, desconecte todos sus equipos para evitar el desgaste innecesario de la batería. Si desea almacenar este no-break / sistema UPS por un período prolongado de tiempo, recargue completamente las baterías ...

  • Tripp Lite TE Series - page 14

    14 1111 W. 35th Street Chicago, IL 60609 USA Service à la clientèle : (773) 869-1234 www.tripplite.com © Tripp Lite, 2001. Tous droits réservés. Guide de l’utilisateur TE Series Line-Interactive UPS Systems (120V) Installation Rapide: p. 16 Exploitation de Base: p. 17 - 19 Entreposage et Entretien: p. 20 Spécifications: p. 2 0 Importantes C ...

  • Tripp Lite TE Series - page 15

    15 Le présent guide contient des instructions et des mises en garde importantes qui doivent être suivies pendant l’installation, l’exploitation et l’entreposage de tous les système UPS Tripp Lite. GARDEZ CES INSTRUCTIONS EN UN LIEU SÛR. Mises en garde relatives à l'emplacement du système UPS • Installez votre système UPS à l’ ...

  • Tripp Lite TE Series - page 16

    16 Installation rapide Branchez votre système UPS dans une prise de secteur . Branchez v otre or dinateur , votre moniteur et votre modem externe aux prises de batteries de votre système UPS. *Votre système UPS n’est conçu que pour supporter du matériel informatique. Vous surchargerez votre système UPS si vous branchez des appareils qui req ...

  • Tripp Lite TE Series - page 17

    17 Commutateurs Votre système UPS étant branché, placez ce commutateur conformément aux recommandations de la section Installation rapide. Position « ON » Fonction: ACTIVER l’alimentation électrique de la batterie. État du système UPS: La batterie se recharge. Les prises de courant du système UPS sont mises sous tension. Le voyant lumin ...

  • Tripp Lite TE Series - page 18

    18 V o y ants Lumineux Les descriptions des voyants lumineux ne sont applicables que lorsque le système UPS est branché à une prise de secteur et mis sous tension. Ce voyant vert s’allumera chaque fois que votre système UPS est branché et qu’il reçoit une alimentation électrique CA normale. Ce voyant rouge s’allumera quand votre systè ...

  • Tripp Lite TE Series - page 19

    19 Autres Fonctions Prises CA Ces prises alimentent votre matériel en courant CA directement du secteur lors de l’exploitation normale et de la batterie lors de pannes de secteur et de baisses de tension. Ils protègent également votre matériel contre les surtensions préjudiciables et le bruit de ligne. Tous les modèles disposant de prises C ...

  • Tripp Lite TE Series - page 20

    20 93-1954 (200105115) Entreposage et Entretien Entreposage Mettez d’abord votre système UPS hors tension et déconnectez son cordon d’alimentation électrique de la prise du secteur. Ensuite, débranchez tout le matériel pour éviter de vider la batterie. Si vous envisagez d’entreposer votre système UPS pour une période prolongée, recha ...

Manufacturer Tripp Lite Category Power Supply

Documents that we receive from a manufacturer of a Tripp Lite TE Series can be divided into several groups. They are, among others:
- Tripp Lite technical drawings
- TE Series manuals
- Tripp Lite product data sheets
- information booklets
- or energy labels Tripp Lite TE Series
All of them are important, but the most important information from the point of view of use of the device are in the user manual Tripp Lite TE Series.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Tripp Lite TE Series, service manual, brief instructions and user manuals Tripp Lite TE Series. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Tripp Lite TE Series.

A complete manual for the device Tripp Lite TE Series, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Tripp Lite TE Series by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Tripp Lite TE Series.

A complete Tripp Lite manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Tripp Lite TE Series - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Tripp Lite TE Series, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Tripp Lite TE Series, that we can find in the current document
3. Tips how to use the basic functions of the device Tripp Lite TE Series - which should help us in our first steps of using Tripp Lite TE Series
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Tripp Lite TE Series
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Tripp Lite TE Series in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Tripp Lite TE Series?

Use the form below

If you did not solve your problem by using a manual Tripp Lite TE Series, ask a question using the form below. If a user had a similar problem with Tripp Lite TE Series it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)