English dropdown-ico

Manual Jensen CH1002

17 pages 0.52 mb
Download

Go to site of 17

Summary
  • Jensen CH1002 - page 1

    OPEN COMPATIBLE DIGIT AL AUDIO COMP ACT DISC CHANGER CH1002 Introduction Descripti on Congratulations on your purchase of the Jensen CH1002 remote control 10-Disc CD Changer . This system allows you to easily upgrade your vehicle's existi ng Jensen CDC ready audio system to include a quality CD entertainment function. Features • Remote mount ...

  • Jensen CH1002 - page 2

    CH1002 2 ¡Gracias! Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual instrucciones claras y fáciles de seguir . Si se toma unos pocos minutos para leerlo, aprenderá cómo utilizar todas las funciones de su nuevo Cambiad or de CD de 10 Discos Jensen para su máximo entretenimiento. Introducción . . . . . . . . . . . ...

  • Jensen CH1002 - page 3

    CH1002 3 Prepar ation (continued) Transpo rt Lock Screws The mechanism in the CD changer is " locked" in to place during shipment by transport screws. Be sure to remove the screws prior to installation. Retain these screws for future use when transporting the unit for service/maintenance . After removing the transport lock screws, place t ...

  • Jensen CH1002 - page 4

    CH1002 4 7. Be careful not to snag any wires when tightening screws. 8. This unit cannot be installed on its side, end, or upside down. Installation in such positions will cause malfunctioni ng of the mechanism. Choosing a Location Select a location for the CD cha nger that: • Provides sufficient ventilation. • Does not have high temperatures ( ...

  • Jensen CH1002 - page 5

    CH1002 5 Installation IMPORT ANT : Incorrect inst allation can cause the CD chang er to “skip.” Mount the unit firmly in place using supplied brackets and screws. The unit can be installed horizontally , vertically , at a 45° angle, or suspended. The position of the built-in anti-vibration springs (left and right side) must correspond to the m ...

  • Jensen CH1002 - page 6

    CH1002 6 Metal Surface a. S tick t he supplied double-sided tape to t he bottom of the mounting bases (B) and peel off the paper backing. b. Drill holes for the self- tapping screws (T5x12). c. Install self-t apping screws to secure the mounting base to the metal. d. Affix the unit to the floor by pressing in place. Carpeted Surface a. Pull the car ...

  • Jensen CH1002 - page 7

    CH1002 7 Installation (continued) V ertical Installation 1. Make sure the anti-vibration springs are set to position "90". 2. Attach a bracket (A) bracket to each side of the unit using the machine screws (M4x5). 3. Attach the brackets (A) to the mounti ng base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers. 4. Determ ...

  • Jensen CH1002 - page 8

    CH1002 8 Metal Surf ace a. S tick the supplied double-sided tape to the bottom of the mounting bases (B) and peel off the paper backing. b. Drill holes for the se lf-tapping screws (T5x12). c. Install self-tapping screws to secure the mounting base to the metal. d. Affix the unit to the floor by pressing in place. Carpeted Surface a. Pull the carpe ...

  • Jensen CH1002 - page 9

    CH1002 9 Installa tion (continued) 45° Angle Installation 1. Make sure the anti-vibration springs ar e set to position "45". 2. Attach a bracket (A) to each side of t he unit using the machine scre ws (M4x5). 3. Attach the brackets (A) to the mounting base (B) using the hexagonal bolts (M6x12) and M6 flat and split washers. 4. Determine ...

  • Jensen CH1002 - page 10

    CH1002 10 Metal Surfa ce a. S tick the supplied double-sided tape to the bottom of the mounting bases (B ) and peel off the paper backing. b. Drill holes for the self-tapping screws (T5x12). c. Install self-tapping screws to secure the mounting base to the metal. d. Affix the unit to the floor by pressing in place. Carpeted Surf ace a. Pull the car ...

  • Jensen CH1002 - page 11

    CH1002 11 Installation (continued) Suspended Installation 1. Make sure the anti-vibration springs are set to position "0". 2. Attach a bracket (A) to each side of t he unit using the machine screws (M4x5). 3. Determine the mounting location for the unit. 4. Drill holes for the self-tapping screws (T5x12). 5. Install self-tapping screws to ...

  • Jensen CH1002 - page 12

    CH1002 12 Wi ri n g IMPORT ANT : Incorrect wiring connections can damage the u nit. Follow the wiring instructions carefully, or have the installation handled b y an experienced technician. Connecting the Data Cable The 15-foot data cable connects the CD changer to the radio. First, connect the right-angle connector end of the data cable to the 8-p ...

  • Jensen CH1002 - page 13

    CH1002 13 Loading the CD Changer Inserting Compact Dis cs in the Magazine 1. Grip the tab on the magazine tray into wh ich you will be loading a disc and pull it out gently . Pull out only one tray at a time. 2. Insert a disc into the tray with the label side up (play surface facing down). 3. Push the tray back into the magazine. Load discs into th ...

  • Jensen CH1002 - page 14

    CH1002 14 Loading the CD Chan ger (continued) Loading the Magazine into t he CD Changer 1. Slide the door on the changer completely to the right. 2. Making sure the top of the magazine is facing upward, gently inser t it into the unit until it clicks into place. 3. Slide the door of the changer fully cl osed. The unit is now ready for operation. NO ...

  • Jensen CH1002 - page 15

    CH1002 15 T roubles hooting Using the Reset Button Press RESET only when one of these conditions occur: • The compact disc changer is first installed • V ehicle power is interrupted ( as when replacing the battery) Specifications Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz-20kHz (-3dB) ...

  • Jensen CH1002 - page 16

    CH1002 16 R esolución de Fallas Utilizando el Botón de Reinicio Presione RESET solamente cuando una de estas condiciones ocurre: • Se instala por primera vez el cambiador de discos compactos. • La energía del vehículo se inter rumpe (como cuando se reemplaza la batería) Especificaciones Frecuencia de Respuesta . . . . . . . . . . . . . . . ...

  • Jensen CH1002 - page 17

    CH1002 17 Gar antie Limitée de 12 Mois AUDIOVOX CORPORA TION (la Société) garantit à l’acheteur initial du produit que si tout ou partie de ce produit, en cours d’utilisation et so us des conditions normal es, venait à présenter des vices de matière primitive ou des défauts de fabrication, dans les 12 mois suivant la date d’achat init ...

Manufacturer Jensen Category Car Stereo System

Documents that we receive from a manufacturer of a Jensen CH1002 can be divided into several groups. They are, among others:
- Jensen technical drawings
- CH1002 manuals
- Jensen product data sheets
- information booklets
- or energy labels Jensen CH1002
All of them are important, but the most important information from the point of view of use of the device are in the user manual Jensen CH1002.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Jensen CH1002, service manual, brief instructions and user manuals Jensen CH1002. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Jensen CH1002.

Similar manuals

A complete manual for the device Jensen CH1002, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Jensen CH1002 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Jensen CH1002.

A complete Jensen manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Jensen CH1002 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Jensen CH1002, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Jensen CH1002, that we can find in the current document
3. Tips how to use the basic functions of the device Jensen CH1002 - which should help us in our first steps of using Jensen CH1002
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Jensen CH1002
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Jensen CH1002 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Jensen CH1002?

Use the form below

If you did not solve your problem by using a manual Jensen CH1002, ask a question using the form below. If a user had a similar problem with Jensen CH1002 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)