English dropdown-ico

Manual Zebra Technologies LP2443

24 pages 0.85 mb
Download

Go to site of 24

Summary
  • Zebra Technologies LP2443 - page 1

    User’s Manual No. 980176-001 Rev. E ©1999 Zebra Technologies Corporation Orion™ Thermal Printer User’s Manual ...

  • Zebra Technologies LP2443 - page 2

    FOREWORD This manual provides installation and operation information for the Orion (LP2443) series printers, manufactured by Zebra Technologies Corporation, Camarillo, California. COPYRIGHT NOTICE This document contains information proprietary to Zebra Technologies Corporation. This docu - ment and the information contained within is copyrighted by ...

  • Zebra Technologies LP2443 - page 3

    WARRANTY INFORMATION We Need To Hear From You! To Establish Your Warranty Period And Provide Access To Technical Support, Send Us Your Product Registration Card Today! Zebra Technologies Corporation warrants the mechanism, control electronics and power supply, under normal use and service, to be free from defects in material and workmanship for a p ...

  • Zebra Technologies LP2443 - page 4

    SHOCK HAZARD WARNING: The printer and power supply should never be operated in a location where either one can get wet. Personal injury could result. MEDIA WARNING: Always use high quality Eltron approved labels, tags and transfer ribbons. If adhesive backed labels are used that DO NOT lay flat on the backing liner, the exposed edges may stick to t ...

  • Zebra Technologies LP2443 - page 5

    980176-001 Rev.E v TABLE OF CONTENTS Installation and Operation . . . . . . . . . . . . . . . . . 1 Unpacking Your Printer . . . . . . . . . . . . . . . . . . . . 2 Getting To Know Your Printer . . . . . . . . . . . . . . . . . 3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 AutoSense Gap Sensor Adjustment . . . . . . . . . . ...

  • Zebra Technologies LP2443 - page 6

    vi 980176-001 Rev.E ...

  • Zebra Technologies LP2443 - page 7

    1 Installation and Operation This section provides information on the installation and operation of the printer. The Orion™ is a low cost, desktop direct ther- mal printer. This family of printers is specifically designed for printing labels, tags or continuous receipts (with or without bar codes) from any DOS™, Windows™or ASCII-based compati ...

  • Zebra Technologies LP2443 - page 8

    Unpacking Your Printer 2 980176-001 Rev.E Installation and Operation User Documentation &S o f t w a r e ...

  • Zebra Technologies LP2443 - page 9

    Getting To Know Your Printer 980176-001 Rev.E 3 Installation and Operation ...

  • Zebra Technologies LP2443 - page 10

    Installation The following steps will guide you through the installation of the printer and software. Step ➊ - Attach Power Supply To The Printer Attach the power supply to a suitable AC outlet. See the SHOCK HAZARD WARNING on page iv. 4 980176-001 Rev.E Installation and Operation ...

  • Zebra Technologies LP2443 - page 11

    Step ➋ Attach Interface Cable For additional information on serial cable wir - ing, refer to Appendix A. 980176-001 Rev.E 5 Installation and Operation Parallel Interface Serial Interface ...

  • Zebra Technologies LP2443 - page 12

    Step ➌ Load Labels 6 980176-001 Rev.E Installation and Operation Open Cover Open Guides Install Roll ...

  • Zebra Technologies LP2443 - page 13

    Load Labels - continued If the indicator fails to light, refer to Appendix A - Troubleshooting. 980176-001 Rev.E 7 Installation and Operation Thread Through Guides Adjust Guides Note: When using linerfree labels, adjust the guides to the widest position. Close Cover and Tap Feed Switch ...

  • Zebra Technologies LP2443 - page 14

    Step Í AutoSense Gap Sensor Adjustment Perform this procedure when loading a new roll. You cannot perform this procedure if using the printer’s label dispenser option. 8 980176-001 Rev.E Installation and Operation Power OFF Hold Feed Button Power ON ...

  • Zebra Technologies LP2443 - page 15

    AutoSense Gap Sensor Adjustment - continued If the indicator remains orange or red, see the troubleshooting steps. 980176-001 Rev.E 9 Installation and Operation 4 MO3351F 16 V3.21 Serial port : 96,N,8,1 Image buffer size:245K Fmem:000,0K,019.9K avl Gmem:000K,0241K avl E I8,0,001 rY S2 D10 R016,000 ZT UN q800 Q1029,025 Option: 04 08 13 now in DUMP m ...

  • Zebra Technologies LP2443 - page 16

    Label Dispenser Option 10 980176-001 Rev.E Installation and Operation Open Door and Push Switch I = Dispense 0 = Batch Remove Several Labels and Push Liner Through Slot Close Door ...

  • Zebra Technologies LP2443 - page 17

    Using Fan-Fold Media 980176-001 Rev.E 11 Installation and Operation Insert Media Adjust Guides Adjust Holders Tighten Screw Note: Use a small Phillips driver (#1) ...

  • Zebra Technologies LP2443 - page 18

    Step ➎ Install Software Start your computer and follow the installation instructions on the compact disc (CD). 12 980176-001 Rev.E Installation and Operation ...

  • Zebra Technologies LP2443 - page 19

    Appendix A - Troubleshooting Problem Solution or Reason POWER indicator does not light GREEN when power switch is turned to ON (1) position. 1. Check power connections from A.C. outlet to power supply to printer. POWER indicator lights GREEN, but printer will not print. 1. Check interface cable connections from computer to printer. Printer appears ...

  • Zebra Technologies LP2443 - page 20

    Other Support Resources The first troubleshooting reference source is the table on the previous page. Next, contact the dealer where you purchased your printer. Zebra Technologies also provides a variety of information and user support services: • Internet : http://www.eltron.com ftp: //ftp.eltron.com e-mail: Label Printers: techsup@eltron.com Ca ...

  • Zebra Technologies LP2443 - page 21

    Serial Interface Cable Wiring The figure below displays the cable wiring required to use the printer's RS-232 serial interface. 980176-001 Rev.E 15 Appendix A - Troubleshooting N/C RxD TxD DTR GND DSR RTS RI CTS Pri nter Hos t 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 DB -9 Pi n # DB -9 Pi n # F em ale DB-9 to M ale D B-9 Cable P/N 300017-006 ( 6&ap ...

  • Zebra Technologies LP2443 - page 22

    Cleaning the Print Head When you load new media, you can also clean the print head. 16 980176-001 Rev.E Appendix A - Troubleshooting Rub Cleaning Pen Across Dark Area of the Print Head Wait One Minute Before Closing Printer Do Not Clean Roller ...

  • Zebra Technologies LP2443 - page 23

    Appendix B - Accessories Accessories available for the Orion™ printer are listed below. Always refer to the ELTRON part number when placing an order. For the name of an Eltron brand dealer in your area, call: 1(805) 579-1800 or the nearest Zebra Tech - nologies office (located on the back of this man - ual). Description Part Number Parallel Inter ...

  • Zebra Technologies LP2443 - page 24

    World Wide Offices: Zebra Technologies Corporation Eltron Products 1001 Flynn Road Camarillo, CA 93012-8706 USA Phone: +1 (805) 579 1800 FAX: +1 (805) 579 1808 e-mail: sales@eltron.com Zebra Technologies, Europe Eltron House Molly Millars Lane Wokingham, RG41 2QZ England Phone: +44 (0) 1189 770 300 FAX: +44 (0) 1189 895 762 e-mail: eurosales@eltron ...

Manufacturer Zebra Technologies Category Printer

Documents that we receive from a manufacturer of a Zebra Technologies LP2443 can be divided into several groups. They are, among others:
- Zebra Technologies technical drawings
- LP2443 manuals
- Zebra Technologies product data sheets
- information booklets
- or energy labels Zebra Technologies LP2443
All of them are important, but the most important information from the point of view of use of the device are in the user manual Zebra Technologies LP2443.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Zebra Technologies LP2443, service manual, brief instructions and user manuals Zebra Technologies LP2443. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Zebra Technologies LP2443.

Similar manuals

A complete manual for the device Zebra Technologies LP2443, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Zebra Technologies LP2443 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Zebra Technologies LP2443.

A complete Zebra Technologies manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Zebra Technologies LP2443 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Zebra Technologies LP2443, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Zebra Technologies LP2443, that we can find in the current document
3. Tips how to use the basic functions of the device Zebra Technologies LP2443 - which should help us in our first steps of using Zebra Technologies LP2443
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Zebra Technologies LP2443
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Zebra Technologies LP2443 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Zebra Technologies LP2443?

Use the form below

If you did not solve your problem by using a manual Zebra Technologies LP2443, ask a question using the form below. If a user had a similar problem with Zebra Technologies LP2443 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)