English dropdown-ico

Manual Inova ICP-PII

94 pages 3.93 mb
Download

Go to site of 94

Summary
  • Inova ICP-PII - page 1

    CompactPCI ® ICP-PIII High-Performance CPU Boards USER’S MANUAL Publication Number: PD00581013.004 AB MAN-ICP-PIII ...

  • Inova ICP-PII - page 2

    This user’ s manual describes a product that, due to its nature, cannot describe a particular applica- tion. The content of this user’ s manual is furnished for informational use only , is subject to change without notice, and should not be constructed as a commitment by Inova Computers GmbH . Inova Computers GmbH assumes no responsibility or l ...

  • Inova ICP-PII - page 3

    ©2002 Inova Computers GmbH Page 0-1 Doc. PD00581013.004 ICP-PIII Preface CompactPCI ® Preface Contents Unpacking and Special Handling Instruc- tions ............................................... 6 Revision History ............................... 7 Three Y ear Limited W arranty .............. 8 1.0 ICP-PIII CPU ........................... 1-2 1. ...

  • Inova ICP-PII - page 4

    ©2002 Inova Computers GmbH Page 0-2 Doc. PD00581013.004 Preface ICP-PIII 1.4 Hardware ............................. 1-10 1.41 Block Diagram ........................................................................................ 1-10 Figure 1.41 Block Diagram ......................................................................................... ...

  • Inova ICP-PII - page 5

    ©2002 Inova Computers GmbH Page 0-3 Doc. PD00581013.004 ICP-PIII Preface CompactPCI ® 3.1 CompactPCI Backplane .......... 3-10 Figure 3.10 Inova’ s 32-Bit CompactPCI 8-Slot Backplane - RH System Slot ................................ 3-11 3.2 Interfaces ............................. 3-12 3.21 J7 & J12 Fast Ethernet .......................... ...

  • Inova ICP-PII - page 6

    ©2002 Inova Computers GmbH Page 0-4 Doc. PD00581013.004 Preface ICP-PIII A1 IPB-FPE8 CPU Extension ......... A-2 A1.1 J11 Interface for COM1, Mouse & Keyboard ............................................ A-2 A1.2 IPB-FPE8 & Front-panel (4HP or 8HP) ....................................................... A-2 Figure A1.2 IPB-FPE8 Stand-Alone ...

  • Inova ICP-PII - page 7

    ©2002 Inova Computers GmbH Page 0-5 Doc. PD00581013.004 ICP-PIII Preface CompactPCI ® B1 IPM-A T A CPU Extension ........... B-2 B1.1 J1 Interfaces ............................................................................................. B-2 Figure B1.1a Dedicated IPM-A T A Backplane ........................................................... ...

  • Inova ICP-PII - page 8

    ©2002 Inova Computers GmbH Page 0-6 Doc. PD00581013.004 Preface ICP-PIII Unpacking and Special Handling Instructions This product has been designed for a long and fault-free life; nonetheless, its life expectancy can be severely reduced by improper treatment during unpacking and installation. Observe standard antistatic precautions when changing p ...

  • Inova ICP-PII - page 9

    ©2002 Inova Computers GmbH Page 0-7 Doc. PD00581013.004 ICP-PIII Preface CompactPCI ® Revision History Manual MAN-ICP-PIII Publication Number PD00581013.XXX Issue Author Date of Issue PD00581013.001 AB 31/11/2000 PD00581013.002 AB 15/08/2001 PD00581013.003 AB 21/09/2001 PD00581013.004 AB 15/02/2002 Specs. Updated & Rear I/O Table Corrected Fi ...

  • Inova ICP-PII - page 10

    ©2002 Inova Computers GmbH Page 0-8 Doc. PD00581013.004 Preface ICP-PIII Three Y ear Limited W arranty Inova Computers (‘ Inova ’) grant the original pur chaser of Inova products the following hardware warranty . No other warranties that may be granted or implied by anyone on behalf of Inova are valid unless the consumer has the expressed writ ...

  • Inova ICP-PII - page 11

    ©2002 Inova Computers GmbH Page 1-1 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 Product Overview Overview Contents 1.0 ICP-PIII CPU ........................... 1-2 1.01 Interfacing ............................................................................................... 1-3 1.02 Peripherals ................................. ...

  • Inova ICP-PII - page 12

    ©2002 Inova Computers GmbH Page 1-2 Doc. PD00581013.004 Product Overview ICP-PIII 1.0 ICP-PIII CPU The ICP-PIII is a high-performance 3U CompactPCI single-board Socket 370 based universal CPU that satisfies the needs of a wide range of industrial automation, military , medical, aerospace, imaging, telecommunications, process control and embedded/O ...

  • Inova ICP-PII - page 13

    ©2002 Inova Computers GmbH Page 1-3 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 1.01 Interfacing For maximum communication flexibility , multiple interfaces satisfying different industrial stand- ards are implemented. LAN applications can take advantage of Inova’ s 10BaseT/100BaseTx (dual) Ethernet implementation or , if high-s ...

  • Inova ICP-PII - page 14

    ©2002 Inova Computers GmbH Page 1-4 Doc. PD00581013.004 Product Overview ICP-PIII 1.1 Specifications Processor Socket 370 BGA (mobile) or FC-PGA based Intel Pentium III or Celeron Pentium III Up to 1000MHz (100MHz PSB, 256kByte L2 cache) Mobile PIII Up to 700MHz BGA2 package with interposer (100MHz PSB, 256kByte L2 cache) Mobile Celeron BGA2 packa ...

  • Inova ICP-PII - page 15

    ©2002 Inova Computers GmbH Page 1-5 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 PCI/PCI Intel 21150 transparent bridge (Master) or Intel 21554 non-transpar- ent PCI/PCI bridge for multiprocessing (Slave) operation with Basic Hot-Swap support (PICMG 2.1 R1.0), Serialized interrupts and univer- sal (3.3/5.0V) V I/O support On-Board ...

  • Inova ICP-PII - page 16

    ©2002 Inova Computers GmbH Page 1-6 Doc. PD00581013.004 Product Overview ICP-PIII 1.2 Configuration Inova’ s high-performance, high-density 3U PIII board supports functionality and connectivity on all three major serial networking levels like Fast Ethernet, FireW ire and USB as well as most state-of- the-art fieldbus standards such as PROFIBUS, ...

  • Inova ICP-PII - page 17

    ©2002 Inova Computers GmbH Page 1-7 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 100/10Mbit Ethernet FLASH Extension: Up to 512MByte TFT , GigaST ) R, PanelLink or L VDS North-Bridge Optional Multiprocessing Socket 370 or BGA2 based Intel Pentium III or Celeron Inova’ s CPUs have been prepared for rear I/O operation. Currently ( ...

  • Inova ICP-PII - page 18

    ©2002 Inova Computers GmbH Page 1-8 Doc. PD00581013.004 Product Overview ICP-PIII 1.3 Software 1.31 Linux Being a modern operating system, Linux executes a 32-bit architecture, uses pre-emptive multi- tasking, has protected memory , supports multiple users, and has rich support for networking, including TCP/IP . Linux was originally written for In ...

  • Inova ICP-PII - page 19

    ©2002 Inova Computers GmbH Page 1-9 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 1.34 Windows CE Microsoft® W indows CE is an operating system designed for a wide variety of embedded systems and products, from hand-held PCs and consumer electronic devices to specialized industrial con- trollers and embedded communications devices ...

  • Inova ICP-PII - page 20

    ©2002 Inova Computers GmbH Page 1-10 Doc. PD00581013.004 Product Overview ICP-PIII 1.4 Hardware 1.41 Block Diagram Figure 1.41 Block Diagram This block diagram is applicable to all Inova’ s PIII-based CPUs. Components and/or functionality may change without notice. An extra PCI load can be attached to the on-board 80-pin header . An open specifi ...

  • Inova ICP-PII - page 21

    ©2002 Inova Computers GmbH Page 1-11 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 1.42 Connector Location Figure 1.42 Connector Locations 1.43 Connector Description T able 1.43 Connector Description KEY CPCI-CONNECTOR PENTIUM III J14 J4 J3 J6 J7 J15 J17 J13 J11 J16 J18 J10 J9 J19 J20 J1 J2 Connector Description J1, J2 CompactPCI I ...

  • Inova ICP-PII - page 22

    ©2002 Inova Computers GmbH Page 1-12 Doc. PD00581013.004 Product Overview ICP-PIII T able 1.43 Continued 1.44 Front-Panel Features T able 1.44 Front Panels 1) The physical COM2 interface is missing on Inova’ s IPB-FPE8 piggyback allowing a PCI piggyback device to be installed. 2) If this piggyback is installed the hard-disk (IDE FLASH) must be i ...

  • Inova ICP-PII - page 23

    ©2002 Inova Computers GmbH Page 1-13 Doc. PD00581013.004 ICP-PIII Product Overview CompactPCI ® 1 Figure 1.44 Front-Panel Options The front-panels shown in Figure 1.44 show the tremendous flexibility built into Inova’ s CPU concept. From left, the standard CPU is 4TE with Ethernet, FireW ire, USB and VGA graphic con- nections. If, instead of VG ...

  • Inova ICP-PII - page 24

    ©2002 Inova Computers GmbH Page 1-14 Doc. PD00581013.004 Product Overview ICP-PIII 1.45 Interface Positions Figure 1.45 Interfaces Figure 1.45 shows the typical positioning of the front panel extension modules for mouse, key- board, COM1, COM2, LPT1 and COM2/Fieldbus interfaces. Note A hard disk, if installed, will generally be fitted to the piggy ...

  • Inova ICP-PII - page 25

    ©2002 Inova Computers GmbH Page 2-1 Doc. PD00581013.004 ICP-PIII Configuration CompactPCI ® 2 Configuration Configuration Con- tents 2.0 Memory Map ........................... 2-2 Figure 2.00 System Ar chitecture ................................................................................................ . 2-2 T able 2.00 UMB Reser vations fo ...

  • Inova ICP-PII - page 26

    ©2002 Inova Computers GmbH Page 2-2 Doc. PD00581013.004 Configuration ICP-PIII 2.0 Memory Map Figure 2.00 System Architectur e The UMB reservation may be set up with the BIOS Upper Memory Blocks (UMBs) 640 kByte Conventional Memory Extended Memory (Above 1 MByte) BIOS 128 kByte Free 48 kByte VGA BIOS CGA Screen Memory MDA Screen Memory VGA Screen ...

  • Inova ICP-PII - page 27

    ©2002 Inova Computers GmbH Page 2-3 Doc. PD00581013.004 ICP-PIII Configuration CompactPCI ® 2 T able 2.00 UMB Reser vations for ISA Start Address Finish Address 0CC00h 0CFFFh 0D000h 0D3FFh 0D400h 0D7FFh 0D800h 0DBFFh 0DC00h 0DFFFh UMB Reservations for ISA T able 2.01 Port Addressing Port Address COM1 3F8h COM2 2F8h LPT1 378h Port Addressing ...

  • Inova ICP-PII - page 28

    ©2002 Inova Computers GmbH Page 2-4 Doc. PD00581013.004 Configuration ICP-PIII 2.1 I/O Mapped Peripherals The original PC-XT and PC-A T desktop computer (ISA bus) specification allows for 10-bit I/O addressed peripherals. This permits peripheral boards to be I/O mapped from 0h to 3FFh. CompactPCI systems permit the full 16-bit addressing capabilit ...

  • Inova ICP-PII - page 29

    ©2002 Inova Computers GmbH Page 2-5 Doc. PD00581013.004 ICP-PIII Configuration CompactPCI ® 2 2.2 Memory Mapped Peripherals PC-A T desktop computers (ISA bus) allow 24-bit memory addressed peripherals. This decoding permits peripheral boards to be mapped in the Intel 80x86 memory map from 0h to 0FFFFFFh. Inova’ s CompactPCI systems allow the fu ...

  • Inova ICP-PII - page 30

    ©2002 Inova Computers GmbH Page 2-6 Doc. PD00581013.004 Configuration ICP-PIII Interrupt Request Interrupt Vector Function/Assignment IRQ0 0 8 h Timer IRQ1 0 9 h Keyboard IRQ2 0 A h Slave 8259 IRQ3 1) 0 B h COM 2/4 IRQ4 1) 0 C h COM 1/3 IRQ5 1) 0Dh LPT2 IRQ6 0 E h Floppy IRQ7 1) 0Fh LPT1 IRQ8 7 0 h Real-Time Clock IRQ9 1) 7 1 h Redirected IRQ2 IRQ ...

  • Inova ICP-PII - page 31

    ©2002 Inova Computers GmbH Page 2-7 Doc. PD00581013.004 ICP-PIII Configuration CompactPCI ® 2 2.4 Inova PIII Device List T able 2.40 shows the available PCI devices both on-board and off-board (CompactPCI backplane). It should be noted that the interrupt routing assumes a standard Inova backplane configuration with a right-hand system slot. T abl ...

  • Inova ICP-PII - page 32

    ©2002 Inova Computers GmbH Page 2-8 Doc. PD00581013.004 Configuration ICP-PIII T able 2.50 CompactPCI Bus Interrupts 2.5 Interrupt Configuration The CompactPCI specification defines a total of six interrupt signals on the backplane. INT A# through INTD# are used to route interrupts from the CompactPCI boards to the PIC on the ‘proc- essor board. ...

  • Inova ICP-PII - page 33

    ©2002 Inova Computers GmbH Page 2-9 Doc. PD00581013.004 ICP-PIII Configuration CompactPCI ® 2 2.6 T imer / Counter The IBM-compatible architecture configur es the programmable timer / counter (Intel 8254-com- patible) devices for system-specific functions as shown in T able 2.50. The BIOS programs T imer 0 to generate an interrupt approximately e ...

  • Inova ICP-PII - page 34

    ©2002 Inova Computers GmbH Page 2-10 Doc. PD00581013.004 Configuration ICP-PIII This page has been left blank intentionally . ...

  • Inova ICP-PII - page 35

    ©2002 Inova Computers GmbH Page 3-1 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 Interfaces Interfaces Contents 3.0 CompactPCI J1/J2 Connector ... 3-3 3.01 CompactPCI Connector ........................................................................... 3-3 Figure 3.01 The 32-Bit CompactPCI Bus Interface Connector ....................... ...

  • Inova ICP-PII - page 36

    ©2002 Inova Computers GmbH Page 3-2 Doc. PD00581013.004 Interfaces ICP-PIII 3.29 J14 FLASH Interface ................................................................................ 3-19 3.30 J18 Floppy Disk Interface ........................................................................ 3-19 3.31 Connecting the PIII to the Inova IPB-FPE8 ...... ...

  • Inova ICP-PII - page 37

    ©2002 Inova Computers GmbH Page 3-3 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.0 CompactPCI J1/J2 Connector The CompactPCI standard is electrically identical to the PCI local bus standard but has been en- hanced to support rugged industrial environments and up to 8 slots. The standard is based upon a 3U board size and uses a rugged ...

  • Inova ICP-PII - page 38

    ©2002 Inova Computers GmbH Page 3-4 Doc. PD00581013.004 Interfaces ICP-PIII T able 3.02 Inova’ s ICP-PIII 32-Bit CompactPCI J1 Pin Assignment 1) Reserved for use for Inova’ s Uninterruptible Power Supply (UPS) Pin Nr Row A Row B Row C Row D Row E J1-25 +5 V REQ64# Pull- U p V ( I / O ) ENUM# +3.3V +5V J1-24 AD[1] + 5 V V( I / O ) AD[0] ACK64# ...

  • Inova ICP-PII - page 39

    ©2002 Inova Computers GmbH Page 3-5 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 T able 3.03 Inova’ s ICP-PIII 32-Bit CompactPCI J2 Pin Assignment (Standard) 4) : 5V open collector signal (5V/100mA) 5) : Option “External Battery” (Note: battery must be removed from CPU board) U bat = +3.4V to +3.6V Pin Nr Row A Row B Row C Row D R ...

  • Inova ICP-PII - page 40

    ©2002 Inova Computers GmbH Page 3-6 Doc. PD00581013.004 Interfaces ICP-PIII T able 3.04 Inova’ s ICP-PIII 32-Bit CompactPCI J2 Pin Assignment for Rear I/O (A) 4) : 5V open collector signal (5V/100mA) 5) : Option “External Battery” (Note: battery must be removed from CPU board) U bat = +3.4V to +3.6V 6) : RS485 signals Pin Nr Row A Row B Row ...

  • Inova ICP-PII - page 41

    ©2002 Inova Computers GmbH Page 3-7 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 T able 3.05 Inova’ s ICP-PIII 32-Bit CompactPCI J2 Pin Assignment for Rear I/O (B) 1) : 5V TTL signals from serial I/O controller 2) : T er mination of USB lines on CPU. The +5V and GND signals need fuses and inductors for decoupling (USB specification). ...

  • Inova ICP-PII - page 42

    ©2002 Inova Computers GmbH Page 3-8 Doc. PD00581013.004 Interfaces ICP-PIII T able 3.06 Inova’ s ICP-PIII 32-Bit CompactPCI J2 Pin Assignment for Rear I/O (C) 1) : 5V TTL signals from serial I/O controller 2) : T ermination of USB lines on CPU. The +5V and GND signals need fuses and inductors for decoupling (USB specification). 3) : The 5V LPT s ...

  • Inova ICP-PII - page 43

    ©2002 Inova Computers GmbH Page 3-9 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 T able 3.07 Inova’ s ICP-PIII Rear I/O J2 (CPU) Integration Currently three forms of rear I/O are available and, depending on the version currently in use, decides which (if any) of the J2 signals are available to the rear J2 connector . The rear I/O opti ...

  • Inova ICP-PII - page 44

    ©2002 Inova Computers GmbH Page 3-10 Doc. PD00581013.004 Interfaces ICP-PIII 3.1 CompactPCI Backplane The form factor defined for CompactPCI boards is based upon the Euro-card industry standard. Both 3U (100 mm by 160 mm) and 6U (233 mm by 100 mm) board sizes are defined. A Com- pactPCI system is composed of up to eight CompactPCI cards. The Compa ...

  • Inova ICP-PII - page 45

    ©2002 Inova Computers GmbH Page 3-11 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 ZABCDEF ZABCDEF ZABCDEF ZABCDEF ZABCDEF ZABCDEF ZABCDEF ZABCDEF Figure 3.10 Inova’ s 32-Bit CompactPCI 8-Slot Backplane - RH System Slot Note: The logical slots are differ ent to the physical slots. The slot marked with the ‘ g ‘ is the System Slot a ...

  • Inova ICP-PII - page 46

    ©2002 Inova Computers GmbH Page 3-12 Doc. PD00581013.004 Interfaces ICP-PIII 3.2 Interfaces 3.21 J7 & J12 Fast Ethernet J7 is available as standard on the CPU front-panel and, as an option, J12 may also be available but at the expense of the FireWir e inter face. The RJ45 interface supports both the 10BaseT and 100BaseTX twisted pair standard. ...

  • Inova ICP-PII - page 47

    ©2002 Inova Computers GmbH Page 3-13 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.22 J17 VGA Interface J17 is available on the CPU front-panel if this option is required and if this position is not already occupied by a PCI, PanelLink or GigaST ) R piggyback. The 15-pin high-density D-Sub connector forms the physical interface for the ...

  • Inova ICP-PII - page 48

    ©2002 Inova Computers GmbH Page 3-14 Doc. PD00581013.004 Interfaces ICP-PIII 2 5 6 65, 000 16.7M 640x480 60/72/75/85 60/72/75/85 60/72/75/85 800x600 60/72/75/85 60/72/75/85 60/72/75/85 1024x768 43I/60/70/ 75/85 43I/60/70/ 75/85 43I/60/70/ 75/85 1280x1024 43I/60/75 43I/60/75 N /A 1600x1200 43I 43I (not 65k) N/ A Note: 32k colours are not selectable ...

  • Inova ICP-PII - page 49

    ©2002 Inova Computers GmbH Page 3-15 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.23 J16 PanelLink Interface J16 is available if requested at time of order and replaces the standard VGA connector on the front- panel. Figure 3.23 PanelLink Interface Connector T able 2.12 PanelLink Inter face Pi n No . Signal 1 Tx2- 2 Tx1- 3 Tx0- 4 TxC- ...

  • Inova ICP-PII - page 50

    ©2002 Inova Computers GmbH Page 3-16 Doc. PD00581013.004 Interfaces ICP-PIII 2.24 J16 GigaST AR Interface The standard 9-pin D-Sub connector is used for GigaST AR video transmission. Figure 2.24 GigaST AR D-Sub Inter face Pinout T able 2.11 GigaST AR Interface 1 6 5 9 Pin No. Signal 1 GigaSTAR Tx+ 2 N/C 3 N/C 4 N/C 5 N/C 6 GigaSTAR Tx- 7 N/C 8 N/C ...

  • Inova ICP-PII - page 51

    ©2002 Inova Computers GmbH Page 3-17 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.25 J19 USB Interface J19 is located as standard on the front panel Figure 3.25 USB Interface Pinout T able 3.25 USB Connector Signals Pi n No . Signal 1 +5V 2 USB P0- 3 USB P0+ 4 GND Housing P E 1234 ...

  • Inova ICP-PII - page 52

    ©2002 Inova Computers GmbH Page 3-18 Doc. PD00581013.004 Interfaces ICP-PIII 3.26 J15 FireWire Interface J15 is located on the front panel (if this option is available) Figure 3.26 FireW ire Inter face Pinout T able 3.26 Fir eWire Connector Signals 246 5 3 1 Pi n No . Signal 1 IEEE 1394 S +12V ( 1A Fuse) 2 IEEE 1394 S GND 3 IEEE 1294 S TPB- 4 IEEE ...

  • Inova ICP-PII - page 53

    ©2002 Inova Computers GmbH Page 3-19 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.27 J20 Infrared (iRdA) Interface This option is proprietary and not documented here. 3.28 J20 Reset Button The reset button allows the CPU to be rest in the event that it ‘hangs’ Performing a reset in this manner is known as a ‘warm’ start as pow ...

  • Inova ICP-PII - page 54

    ©2002 Inova Computers GmbH Page 3-20 Doc. PD00581013.004 Interfaces ICP-PIII 3.31 Connecting the PIII to the Inova IPB-FPE8 Appendix A provides more information on the IPB-FPE8 and its derivatives. Figure 3.31 shows how the CPU connects to the piggyback by a length of flex-cable. Figure 3.31 CPU to IPB-FPE8 Connection J11 J13 J10 J9 J4 J3 J14 J18 ...

  • Inova ICP-PII - page 55

    ©2002 Inova Computers GmbH Page 3-21 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.32 Connecting the PIII to the Inova ICP-HD-1 Appendix B provides more information on the ICP-HD-1 and its derivatives. Figure 3.32 shows how the CPU connects to the piggyback by lengths of flex-cable. Figure 3.32 CPU to ICP-HD-1 Connection J11 J13 J10 J9 ...

  • Inova ICP-PII - page 56

    ©2002 Inova Computers GmbH Page 3-22 Doc. PD00581013.004 Interfaces ICP-PIII 3.33 Connecting the PIII to the Inova IPB-FPE12 Appendix C provides more information on the IPB-FPE12 and its derivatives. Figure 3.33 shows how the CPU connects to the piggyback by a length of flex-cable. The illustration also shows the IPB-FPE8 connection (Appendix A) F ...

  • Inova ICP-PII - page 57

    ©2002 Inova Computers GmbH Page 3-23 Doc. PD00581013.004 ICP-PIII Interfaces CompactPCI ® 3 3.34 Connecting the PIII to the Inova IPB-FPE12 Appendix C provides more information on the IPB-FPE12 and its derivatives. Figure 3.34 shows how the CPU connects to the piggyback by a length of flex-cable. The illustration also shows the ICP-HD-1 connectio ...

  • Inova ICP-PII - page 58

    ©2002 Inova Computers GmbH Page 3-24 Doc. PD00581013.004 Interfaces ICP-PIII 3.35 Connecting the PIII to the ICP-FD-1 Figure 3.35 shows how the CPU connects to the slim-line floppy disk unit. Figure 3.35 CPU to Slim-Line Floppy Disk Connection Floppy J11 J13 J10 J9 J4 J3 J14 J18 J6 PENTIUM III ...

  • Inova ICP-PII - page 59

    ©2001 Inova Computers GmbH Page A-1 CPU Appendix-A Appendix A IPB-FPE8 CompactPCI ® A IPB-FPE8 IPB-FPE8 Contents A1 IPB-FPE8 CPU Extension ......... A-2 A1.1 J11 Interface for COM1, Mouse & Keyboard ............................................ A-2 A1.2 IPB-FPE8 & Front-panel (4HP or 8HP) ................................................... ...

  • Inova ICP-PII - page 60

    ©2001 Inova Computers GmbH Page A-2 CPU Appendix-A IPB-FPE8 Appendix A A1 IPB-FPE8 CPU Extension The IPBFPE8 provides additional CPU functionality in the form of PS-2 style mouse and keyboard connectors and a serial COM1 port. A1.1 J11 Interface for COM1, Mouse & Keyboard The control of the mouse, keyboard and COM1 interfaces is performed thro ...

  • Inova ICP-PII - page 61

    ©2001 Inova Computers GmbH Page A-3 CPU Appendix-A Appendix A IPB-FPE8 CompactPCI ® A J11 Pin 1 A1.3 Stand-Alone IPB-FPE8 Figure A1.3 illustrates the construction of the stand-alone IPB-FPE8 piggyback and the underside location of the J11 connector . Care should be taken to ensure that pin 1 of J11 on the CPU base board is linked by an appropriat ...

  • Inova ICP-PII - page 62

    ©2001 Inova Computers GmbH Page A-4 CPU Appendix-A IPB-FPE8 Appendix A J10A J9A J10B J9B J18B J18A J11 Figure A1.4 Piggyback Interface IPB-FPE8MS Note that the IPB-FPE8 module does not allow a HD to be connected behind it and the lower 9- pin D-Sub slot may be used for remote connection of PanelLink for example. The IPB-FPE8MS shown in figure A1.4 ...

  • Inova ICP-PII - page 63

    ©2001 Inova Computers GmbH Page A-5 CPU Appendix-A Appendix A IPB-FPE8 CompactPCI ® A COM1 PCB Cut-out: 1 DiskOnChip FLASH 2 For LPT1 Flex Cable 3 Flying Lead / Connector 4 Piggyback Flying Lead 5 IDE Flex-Cables [J9a, J10a] to CPU 2 3 4 5 Mouse Keyboard J11 A1.5 IPB-FPE8MS Description As mentioned previously , the IPB-FPE8MS has a number of addi ...

  • Inova ICP-PII - page 64

    ©2001 Inova Computers GmbH Page A-6 CPU Appendix-A IPB-FPE8 Appendix A A1.6 Keyboard Interface A front-panel with COM1, COM2 mouse and keyboard interfaces is either integrated into an 8HP standard CPU front-panel or available as a separate 4HP unit. The piggyback located behind these interfaces connects to the CPU-mounted J11 connector . Figure A1 ...

  • Inova ICP-PII - page 65

    ©2001 Inova Computers GmbH Page A-7 CPU Appendix-A Appendix A IPB-FPE8 CompactPCI ® A A1.8 COM1 Interface The COM1 port features a complete set of handshaking and modem control signals, maskable interrupt generation and high-speed data transfer rates. A front-panel with COM1, mouse and keyboard interfaces is either integrated into an 8HP standard ...

  • Inova ICP-PII - page 66

    ©2001 Inova Computers GmbH Page A-8 CPU Appendix-A IPB-FPE8 Appendix A This page has been left blank intentionally . ...

  • Inova ICP-PII - page 67

    ©2001 Inova Computers GmbH Page B-1 CPU Appendix-B Appendix B ICP-HD CompactPCI ® B ICP-HD ICP-HD Contents B1 ICP-HD CPU Extension ............. B-2 B1.1 J11, J13 Interfaces .................................................................................... B-2 B1.2 ICP-HD-1 & Front-panel (4HP or 8HP) ........................................ ...

  • Inova ICP-PII - page 68

    ©2001 Inova Computers GmbH Page B-2 CPU Appendix-B ICP-HD Appendix B B1 ICP-HD CPU Extension Several hard-disk connection possibilities exist of which two are documented here. Both of these provide additional CPU functionality in the form of PS-2 style mouse and keyboard connectors and serial COM1 and COM2 ports. B1.1 J11, J13 Interfaces The contr ...

  • Inova ICP-PII - page 69

    ©2001 Inova Computers GmbH Page B-3 CPU Appendix-B Appendix B ICP-HD CompactPCI ® B J13A J10A J9A J11 J13 J9 J10 B1.3 IDE Carrier Board ICP-HD-1 Figure B1.3 illustrates the construction of the stand-alone ICP-HD1 carrier and the underside loca- tion of the J11 & J13 connectors. The same mechanical construction applies to the integrated versio ...

  • Inova ICP-PII - page 70

    ©2001 Inova Computers GmbH Page B-4 CPU Appendix-B ICP-HD Appendix B J13 J11 J9 J10 J18 J13A J18A J10A J9A J1 J2 Figure B1.4 IDE Carrier ICP-HDE8MS The ICP-HDE8MS shown in figure B1.4 enables connection of floppy , a CD-ROM and other pe- ripherals. The connector names and descriptions are declared in table B1.4. B1.4 ICP-HDE8MS (Theme V ariation) ...

  • Inova ICP-PII - page 71

    ©2001 Inova Computers GmbH Page B-5 CPU Appendix-B Appendix B ICP-HD CompactPCI ® B * If connectors 9 and 10 are connected to a Master device then 9a and 10a must be connected to a Slave. Connector Description J 1 Standard Floppy Disk Connector - To Floppy Disk J 2 Standard IDE Connector - To Hard Disk / FLASH J9, J10 Primary HD (Master / Slave) ...

  • Inova ICP-PII - page 72

    ©2001 Inova Computers GmbH Page B-6 CPU Appendix-B ICP-HD Appendix B B1.5 ICP-HDE8MS Description As mentioned previously , the ICP-HDE8MS has a number of additional features compared to the standard ICP-HD-1 module. These extra features include HD and FD connection with both stand- ard connectors and the Inova flex cables. This provides the user w ...

  • Inova ICP-PII - page 73

    ©2001 Inova Computers GmbH Page B-7 CPU Appendix-B Appendix B ICP-HD CompactPCI ® B B1.6 Keyboard Interface A front-panel with COM1, COM2 mouse and keyboard interfaces is either integrated into an 8HP standard CPU front-panel or available as a separate 4HP unit. The piggyback located behind these interfaces connects to the CPU-mounted J11 connect ...

  • Inova ICP-PII - page 74

    ©2001 Inova Computers GmbH Page B-8 CPU Appendix-B ICP-HD Appendix B B1.8 COM1 & COM 2 Interfaces The two COM ports feature a complete set of handshaking and modem control signals, maskable interrupt generation and high-speed data transfer rates. A front-panel with COM1, COM2, mouse and keyboard interfaces is either integrated into an 8HP stan ...

  • Inova ICP-PII - page 75

    ©2001 Inova Computers GmbH Page B-1 CPU Appendix-B Appendix B IPM-ATA CompactPCI ® B IPM-A T A IPM-A T A B1 IPM-A T A CPU Extension ........... B-2 B1.1 J1 Interfaces ............................................................................................. B-2 Figure B1.1a Dedicated IPM-A T A Backplane ........................................ ...

  • Inova ICP-PII - page 76

    ©2001 Inova Computers GmbH Page B-2 CPU Appendix-B IPM-ATA Appendix B B1 IPM-A T A CPU Extension Inova Plug-In Module (IPM-) offers the user the ability to exchange a hard-disk for example with- out having to remove the CPU from the CompactPCI enclosure and then dismantle it etc. Cur- rently , three units exist that provide industr y with hard-dis ...

  • Inova ICP-PII - page 77

    ©2001 Inova Computers GmbH Page B-3 CPU Appendix-B Appendix B IPM-ATA CompactPCI ® B B1.1 J1 Interfaces (Contd.) Standard IDE ribbon-cable is used to connect J2 of the IPB-RIO-HD-FD module to the IPM’ s dedi- cated backplane. The use of ribbon cable permits the mass-storage device(s) to be positioned at any convenient location within the Compac ...

  • Inova ICP-PII - page 78

    ©2001 Inova Computers GmbH Page B-4 CPU Appendix-B IPM-ATA Appendix B B1.2 IPM-A T A-HD The IPM-A T A-HD has provision for one standard notebook (2.5”) EIDE device (FLASH or hard-disk) and one Compact FLASH or MicroDrive site. Figure B1.2 illustrates the significant connectors for this device while T able B1.2 indicates the jumper positions for ...

  • Inova ICP-PII - page 79

    ©2001 Inova Computers GmbH Page B-5 CPU Appendix-B Appendix B IPM-ATA CompactPCI ® B B1.3 IPM-A T A-CF The IPM-A T A-CF has provision for one or two standard Compact FLASH or MicroDrive devices. Figure B1.3 illustrates the significant connectors for this device while T able B1.3 indicates the jumper settings for the various Master/Slave device co ...

  • Inova ICP-PII - page 80

    ©2001 Inova Computers GmbH Page B-6 CPU Appendix-B IPM-ATA Appendix B B1.4 IPM-A T A-PCMCIA The IPM-A T A-PCMCIA has provision for one standard A T A PCMCIA device and one Compact FLASH or MicroDrive site. Figure B1.4 illustrates the significant connectors for this device while T able B1.4 indicates the jumper settings for the various Master/Slave ...

  • Inova ICP-PII - page 81

    ©2001 Inova Computers GmbH Page B-7 CPU Appendix-B Appendix B IPM-ATA CompactPCI ® B B1.5 Device Compatibility Because of the diversity of Compact FLASH devices available with different ar chitectures and error recovery routines etc. there is a strong possibility that some Master / Slave combinations will fail to be recognised by the BIOS. T o he ...

  • Inova ICP-PII - page 82

    ©2001 Inova Computers GmbH Page B-8 CPU Appendix-B IPM-ATA Appendix B This page has been left blank intentionally . ...

  • Inova ICP-PII - page 83

    ©2001 Inova Computers GmbH Page C-1 CPU Appendix-C Appendix C IPB-FPE12 CompactPCI ® C IPB-FPE12 IPB-FPE12 Contents C1 IPB-FPE12 CPU Extension ........ C-2 C1.1 J13 Interface for LPT1 & COM2 ............................................................... C-2 C1.2 IPB-FPE12 & Front-panel (4HP or 12HP) ...................................... ...

  • Inova ICP-PII - page 84

    ©2001 Inova Computers GmbH Page C-2 CPU Appendix-C IPB-FPE12 Appendix C C1 IPB-FPE12 CPU Extension The Inova IPB-FPE12 adds LPT and COM2 functionality to any Inova CPU. The piggyback is avail- able as a stand-alone device with its own 4HP front-panel or integrated within a 12HP K6 or PPC front-panel. The information documented here is valid regard ...

  • Inova ICP-PII - page 85

    ©2001 Inova Computers GmbH Page C-3 CPU Appendix-C Appendix C IPB-FPE12 CompactPCI ® C J13 C1.3 LPT1 & COM2 Piggyback Figure C1.3 illustrates the construction of the stand-alone IPB-FPE12 piggyback and the upperside location of the J13 connector . The same mechanical construction applies to the integrated ver- sion. Care should be taken to en ...

  • Inova ICP-PII - page 86

    ©2001 Inova Computers GmbH Page C-4 CPU Appendix-C IPB-FPE12 Appendix C T able C1.3 IPB-FPE12 Connector Description Connector Description J 1 3 LPT1 & COM2 Note: Other Inova piggybacks (ICP-HD-1 & ICP- HDE8) pr ovide J13a to “daisy-chain” the LPT1 / COM2 interfaces. If these connec- tors are used for the integration of the IPB-FPE12 th ...

  • Inova ICP-PII - page 87

    ©2001 Inova Computers GmbH Page C-5 CPU Appendix-C Appendix C IPB-FPE12 CompactPCI ® C C1.4 LPT1 Interface A front-panel with LPT1 and COM2 interfaces is either integrated into a 12HP standard CPU front- panel or available as a separate 4HP unit. The piggyback located behind these interfaces connects to the CPU-mounted J13 connector . Figure C1.6 ...

  • Inova ICP-PII - page 88

    ©2001 Inova Computers GmbH Page C-6 CPU Appendix-C IPB-FPE12 Appendix C C1.5 COM2 Interface The COM2 port features a complete set of handshaking and modem control signals, maskable interrupt generation and high-speed data transfer rates. A front-panel with LPT1 and COM2 inter- faces is either integrated into a 12HP standard CPU front-panel or avai ...

  • Inova ICP-PII - page 89

    ©2001 Inova Computers GmbH Page D-1 CPU Appendix-D Appendix D IPB-RIO CompactPCI ® D IPB-RIO IPB-RIO Contents D1 IPB-RIO CPU Extension ............ D-2 D1.1 IPB-RIO-HD-FD ....................................................................................... D-2 Figure D1.1 IPB-RIO-HD-FD ........................................................... ...

  • Inova ICP-PII - page 90

    ©2001 Inova Computers GmbH Page D-2 CPU Appendix-D IPB-RIO Appendix D D1 IPB-RIO CPU Extension T o enhance the I/O and serviceability of their CPUs, Inova have introduced rear I/O modules that connect to a CompactPCI connector on the rear of the Master Slot on the backplane. All standard Inova backplanes are equipped with this R2 connector so that ...

  • Inova ICP-PII - page 91

    ©2001 Inova Computers GmbH Page D-3 CPU Appendix-D Appendix D IPB-RIO CompactPCI ® D D1.2 IPB-RIO-HD-LPT -(FLEX) Similar to the IPB-RIO-HD-FD, this transition module recovers the embedded IDE and LPT signals from the CompactPCI backplane and presents them in a form ready for device connection. This time, instead of a standard IDE header , the IDE ...

  • Inova ICP-PII - page 92

    ©2001 Inova Computers GmbH Page D-4 CPU Appendix-D IPB-RIO Appendix D D1.3 IPB-RIO-C-SHORT All Inova -RIO(C) compatible CPUs can take advantage of this transition module as it allows the signals shown in table D1.3 to be recovered (used). Figure D1.3 illustrates this piggyback and points to the available interfaces. Figure D1.3 IPB-RIO-C-SHOR T T ...

  • Inova ICP-PII - page 93

    ©2001 Inova Computers GmbH Page D-5 CPU Appendix-D Appendix D IPB-RIO CompactPCI ® D D1.4 IPB-RIO-C-80MM Similar to the -SHORT version, this transition module extends the signals shown in table D1.3 to a rear panel. Naturally , not all enclosures are suitable for this type of connection and the following must be considered. N Inova Desktop system ...

  • Inova ICP-PII - page 94

    ©2001 Inova Computers GmbH Page D-6 CPU Appendix-D IPB-RIO Appendix D This page has been left blank intentionally . ...

Manufacturer Inova Category Computer Hardware

Documents that we receive from a manufacturer of a Inova ICP-PII can be divided into several groups. They are, among others:
- Inova technical drawings
- ICP-PII manuals
- Inova product data sheets
- information booklets
- or energy labels Inova ICP-PII
All of them are important, but the most important information from the point of view of use of the device are in the user manual Inova ICP-PII.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Inova ICP-PII, service manual, brief instructions and user manuals Inova ICP-PII. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Inova ICP-PII.

Similar manuals

A complete manual for the device Inova ICP-PII, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Inova ICP-PII by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Inova ICP-PII.

A complete Inova manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Inova ICP-PII - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Inova ICP-PII, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Inova ICP-PII, that we can find in the current document
3. Tips how to use the basic functions of the device Inova ICP-PII - which should help us in our first steps of using Inova ICP-PII
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Inova ICP-PII
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Inova ICP-PII in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Inova ICP-PII?

Use the form below

If you did not solve your problem by using a manual Inova ICP-PII, ask a question using the form below. If a user had a similar problem with Inova ICP-PII it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)