English dropdown-ico

Manual Dell E7240

61 pages 5.92 mb
Download

Go to site of 61

Summary
  • Dell E7240 - page 1

    Dell Latitude E7240 Owner's Manual Regulatory Model: P22S Regulatory Type: P22S001 ...

  • Dell E7240 - page 2

    Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 201 ...

  • Dell E7240 - page 3

    Contents 1 Working on Your Computer ................................................................................... 5 Before Working Inside Your Computer ................................................................................................ 5 Turning Off Your Computer ................................................................... ...

  • Dell E7240 - page 4

    Installing the Coin-Cell Battery .......................................................................................................... 25 Removing the Speakers ...................................................................................................................... 26 Installing the Speakers ....................................... ...

  • Dell E7240 - page 5

    1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions exist: • You have read the safety information that ...

  • Dell E7240 - page 6

    5. Disconnect your computer and all attached devices from their electrical outlets. 6. Close the display and turn the computer upside-down on a flat work surface. NOTE: To avoid damaging the system board, you must remove the main battery before you service the computer. 7. Remove the main battery. 8. Turn the computer top-side up. 9. Open the displ ...

  • Dell E7240 - page 7

    Turning Off Your Computer CAUTION: To avoid losing data, save and close all open files and exit all open programs before you turn off your computer. 1. Shut down the operating system: • In Windows 8: – Using a touch-enabled device: a. Swipe in from the right edge of the screen, opening the Charms menu and select Settings . b. Select the and the ...

  • Dell E7240 - page 8

    5. Turn on your computer. ...

  • Dell E7240 - page 9

    2 Docking Your Computer Follow the steps to dock your computer: a. Place the docking spacer until the docking spacer clicks on its place in the docking station. b. Place the computer on the docking spacer to dock your computer. NOTE: This docking spacer can be used to dock only the Latitude E7240 / Latitude E7440 computers. You cannot dock any othe ...

  • Dell E7240 - page 10

    ...

  • Dell E7240 - page 11

    3 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may require the following tools: • Small flat-blade screwdriver • Phillips screwdriver • Small plastic scribe System Overview Inside View — Back 1. s ...

  • Dell E7240 - page 12

    3. battery bay 4. SD card 5. WLAN card 6. WWAN card 7. memory module 8. heatsink Inside view — Front 1. coin-cell battery 2. SIM card board 3. speaker 4. system board 5. wi-fi switch board 6. system fan 7. display assembly ...

  • Dell E7240 - page 13

    Removing the SD Card 1. Follow the procedures in Before Working Inside Your Computer . 2. Press in on the SD card to release it from the computer. 3. Slide the SD card out of the computer. Installing the SD Card 1. Slide the SD card into its slot until it clicks into place. 2. Follow the procedures in After Working Inside Your Computer. Removing th ...

  • Dell E7240 - page 14

    3. Lift the battery from the computer. Installing the Battery 1. Slide the battery into its slot until it clicks into place. 2. Follow the procedures in After Working Inside Your Computer. Removing the Base Cover 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove battery. ...

  • Dell E7240 - page 15

    3. Remove the screws that secure the base cover to the computer. ...

  • Dell E7240 - page 16

    4. Lift the base cover to remove it from the computer. Installing the Base Cover 1. Place the base cover to align with the screw holes correctly on the computer. 2. Tighten the screws to secure the base cover to the computer. 3. Install battery. 4. Follow the procedures in After Working Inside Your Computer . Removing the mSATA SSD Card 1. Follow t ...

  • Dell E7240 - page 17

    Installing the mSATA SSD Card 1. Place the mSATA SSD card in its slot in the computer. 2. Tighten the screw to secure the mSATA SSD card to the computer. 3. Install: a. base cover b. SD card c. battery 4. Follow the procedures in After Working Inside Your Computer . Removing the Keyboard Trim 1. Follow the procedures in Before Working Inside Your C ...

  • Dell E7240 - page 18

    4. Perform the following steps as shown in the illustration: a. Lift the latch that secure the keyboard cable to the computer [1]. b. Disconnect the keyboard cable the computer [2]. 5. Flip the computer and remove the screws that secure the keyboard to the computer. 6. Perform the following steps as shown in the illustration: a. Slide the keyboard ...

  • Dell E7240 - page 19

    Removing the Palmrest 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. SD card b. battery c. base cover d. keyboard trim e. keyboard 3. Remove the screws that secure the palmrest assembly and flip the computer. 4. Perform the following steps as shown in the illustration: a. Disconnect the cable from the computer. b. L ...

  • Dell E7240 - page 20

    Installing the Palmrest 1. Align the palm rest assembly to its original position in the computer and snap it into place. 2. Tighten the screws to secure the palmrest assembly to the front of the computer. 3. Route the touch cable and connect to the system board. 4. Tighten the screws that secure the palmrest assembly to the base of the computer. 5. ...

  • Dell E7240 - page 21

    4. Install: a. palmrest b. keyboard c. keyboard trim d. base cover e. battery f. SD card 5. Follow the procedures in After Working Inside Your Computer . Removing the Memory Module 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. battery b. base cover 3. Pry the securing clips away from the memory module until it pops ...

  • Dell E7240 - page 22

    3. Disconnect the antenna cables from the WLAN card and remove the screw that secures the WLAN card to the computer. Remove the WLAN card from the computer. Installing the WLAN Card 1. Insert the WLAN card into its connector at a 45–degree angle into its slot. 2. Tighten the screw to secure the WLAN card to the computer. 3. Connect the antenna ca ...

  • Dell E7240 - page 23

    Installing the WWAN Card 1. Place the WWAN card in its slot in the system board. 2. Press the WWAN card down and tighten the screw to secure the WWAN card to the computer. 3. Connect the antenna cables to their respective connectors marked on the WWAN card. 4. Install: a. base cover b. SD card c. battery 5. Follow the procedures in After Working In ...

  • Dell E7240 - page 24

    3. Remove the screws that secure the display panel to the display assembly. Lift the display panel over. 4. Perform the following steps as shown in the illustration: a. Peel the LVDS cable connector tape [1]. b. Disconnect the LVDS cable from the display panel [2]. c. Remove the display panel from the display assembly [3]. Installing the Display Pa ...

  • Dell E7240 - page 25

    Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. SD card b. battery c. base cover d. keyboard trim e. keyboard f. palmrest 3. Remove the screw that secures the coin-cell battery to the system board. 4. Perform the following steps as shown in the illustration: a. Lift the latch that secur ...

  • Dell E7240 - page 26

    Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. SD card b. battery c. base cover d. keyboard trim e. keyboard f. palmrest 3. Perform the following steps as shown in the illustration: a. Disconnect the speaker cable [1]. b. Remove the screws that secure the speakers to the computer. c. Unroute th ...

  • Dell E7240 - page 27

    3. Remove the screws that secure the display-hinge cover to the computer. Lift the display-hinge cover. Installing the Display-Hinge Cover 1. Place the display-hinge cover and tighten the screws to secure the display-hinge cover to the computer. 2. Install battery. 3. Follow the procedures in After Working Inside Your Computer . Removing the Heatsi ...

  • Dell E7240 - page 28

    4. Perform the following steps as shown in the illustration: a. Lift the heatsink from the computer [1]. b. Remove the heatsink from the computer [2]. Installing the Heatsink 1. Place the heatsink into its original position on the computer. 2. Tighten the screws to secure the heatsink to the computer. 3. Install: a. display assembly b. display-hing ...

  • Dell E7240 - page 29

    3. Perform the following steps as shown in the illustration: a. Disconnect the WLAN cable from the system board [1]. b. Unroute the WLAN cables from the slot [2]. c. Remove the screw that secures the heatsink to the computer. 4. Perform the following steps as shown in the illustration: Disconnect the antenna cables from the wireless solution. a. Di ...

  • Dell E7240 - page 30

    Installing the Display Assembly 1. Insert the LVDS and wireless antenna cables through the holes on the base chassis and connect them. 2. Place the display assembly onto the computer. 3. Tighten the screws on both sides to secure the display assembly. 4. Tighten the screw that secures heatsink to the computer. 5. Route and connect the LVDS cables t ...

  • Dell E7240 - page 31

    Installing the System Fan 1. Connect the system-fan cable to the system board. 2. Tighten the screws that secure the system fan to the computer. 3. Align the system fan in its place on the system board. 4. Install: a. display-hinge cover b. palmrest c. keyboard d. keyboard trim e. base cover f. SD card g. battery 5. Follow the procedures in After W ...

  • Dell E7240 - page 32

    3. Perform the following steps as shown in the illustration: a. Lift the I/O latch [1]. b. Remove the I/O cable from the system board [2]. c. Disconnect the I/O cable from system board[3]. d. Disconnect the speaker cable from the system board. e. Remove the screws that secure the system board to the computer. 4. Perform the following steps as shown ...

  • Dell E7240 - page 33

    4. Install: a. system fan b. heat sink c. display assembly d. display-hinge cover e. speaker f. palmrest g. keyboard h. keyboard trim i. mSATA j. base cover k. battery l. SD card 5. Follow the procedures in After Working Inside Your Computer . Removing the Power Connector 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: ...

  • Dell E7240 - page 34

    4. Install: a. system fan b. palmrest c. keyboard d. base cover e. battery f. SD card 5. Follow the procedures in After Working Inside Your Computer . ...

  • Dell E7240 - page 35

    4 Docking Port Information The docking port is used for connecting the laptop to a docking station (optional). 1. Docking Port ...

  • Dell E7240 - page 36

    ...

  • Dell E7240 - page 37

    5 System Setup Boot Sequence Boot Sequence allows you to bypass the System Setup ‐ defined boot device order and boot directly to a specific device (for example: optical drive or hard drive). During the Power-on Self Test (POST), when the Dell logo appears, you can: • Access System Setup by pressing <F2> key • Bring up the one-time boot ...

  • Dell E7240 - page 38

    Keys Navigation <Esc> Moves to the previous page till you view the main screen. Pressing <Esc> in the main screen displays a message that prompts you to save any unsaved changes and restarts the system. <F1> Displays the System Setup help file. System Setup Options NOTE: Depending on your computer and its installed devices, the it ...

  • Dell E7240 - page 39

    Option Description Advance Boot Option This option is required for Legacy boot mode. This option is not allowed if Secure Boot is enabled. • Enable Legacy Option ROMs — This option is disabled by default. Date/Time Allows you to set the date and time. Table 3. System Configuration Option Description Integrated NIC Allows you to configure the in ...

  • Dell E7240 - page 40

    Option Description NOTE: SATA is configured to support RAID mode. Drives Allows you to configure the SATA drives on board. The options are: • SATA-0 • SATA-1 • SATA-2 • SATA-3 Default Setting: All drives are enabled. SMART Reporting This field controls if the hard drive errors for the integrated drives are reported during system startup. Th ...

  • Dell E7240 - page 41

    Option Description the system. The option is disabled by default. • Enable Unobtrusive Mode Miscellaneous Devices Allows you enable or disable the various on board devices. The options are: • Enable Microphone • Enable Hard Drive Free Fall Protection • Enable Camera • Enable Media Card • Disable Media Card Default Setting: All devices a ...

  • Dell E7240 - page 42

    Option Description Default Setting: Enable Strong Password is not selected. Password Configuration You can define the length of your password. Min = 4 , Max = 32 Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they are set. The options are: • Disabled (Default Setting) • Re ...

  • Dell E7240 - page 43

    NOTE: For enable system needs to be UEFI boot mode and enable legacy option ROMs to be turned off. Expert key Management Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are: • PK • KEK • db • dbx If you enable the Custom Mode, the rel ...

  • Dell E7240 - page 44

    Option Description Default Setting: Enable Intel TurboBoost Hyper-Thread Control Allows you to enable or disable the HyperThreading in the processor. Default Setting: Enabled Rapid Start Technology The Intel Rapid Start feature might improve the battery life by automatically putting the system into a low power state during sleep after a user specif ...

  • Dell E7240 - page 45

    Option Description • Disabled - Does not allow the system to power on by special LAN signals when it receives a wake-up signal from the LAN or wireless LAN. (Default Setting) • LAN Only - Allows the system to be powered on by special LAN signals. • WLAN Only • LAN or WLAN • LAN with PXE Boot Block Sleep Allows you to block the computer fr ...

  • Dell E7240 - page 46

    Option Description NOTE: When setup is running, this option has no effect, Setup works in the “Fn Key Only” mode. Mouse/Touchpad Allows you to define how the computer handles the mouse and touchpad input. The options are: • Serial Mouse • PS2 Mouse • Touchpad/PS-2 Mouse (Default Setting) Numlock Enable Specifies if the NumLock function ca ...

  • Dell E7240 - page 47

    Table 11. Wireless Option Description Wireless Switch Allows you to determine which wireless device can be controlled by the wireless switch. The options are: • WWAN • WLAN • Bluetooth • WiGig All options are enabled by default. Wireless Device Enable Allows you to enable or disable the wireless devices. The options are: • WWAN • Blueto ...

  • Dell E7240 - page 48

    3. Enter the Service Tag or Express Service Code and click Submit . NOTE: To locate the Service Tag, click Where is my Service Tag? NOTE: If you cannot find your Service Tag, click Detect My Product . Proceed with the instructions on screen. 4. If you are unable to locate or find the Service Tag, click the Product Category of your computer. 5. Choo ...

  • Dell E7240 - page 49

    To enter a system setup, press <F2> immediately after a power-on or re-boot. 1. In the System BIOS or System Setup screen, select System Security and press <Enter>. The System Security screen appears. 2. In the System Security screen, verify that Password Status is Unlocked . 3. Select System Password , enter your system password, and p ...

  • Dell E7240 - page 50

    ...

  • Dell E7240 - page 51

    6 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss. If you are unable to fix the problem yourself, service and support personnel ...

  • Dell E7240 - page 52

    Device Status Lights Table 14. Device Status Lights Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. The device status LEDs are usually locate ...

  • Dell E7240 - page 53

    Alternately blinking amber light and white light An unauthenticated or unsupported non-Dell AC adapter is attached to your laptop. Alternately blinking amber light with steady white light Temporary battery failure with AC adapter present. Constantly blinking amber light Fatal battery failure with AC adapter present. Light off Battery in full charge ...

  • Dell E7240 - page 54

    ...

  • Dell E7240 - page 55

    7 Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For comprehensive specification of your computer go to Specifications’ section in your Owner’s Manual available on the support site at dell.com/support . For more information about the configuration of you ...

  • Dell E7240 - page 56

    Feature Specification Stereo conversion 24-bit (analog-to-digital and digital-to-analog) Interface: Internal high-definition audio External microphone-in, stereo headphones, and headset combo connector Speakers two Internal speaker amplifier 1 W (RMS) per channel Volume controls hot keys Table 20. Video Feature Specification Type integrated on syst ...

  • Dell E7240 - page 57

    Table 23. Ports and Connectors Features Specification Audio one microphone/stereo headphone/speakers connector Video Mini DisplayPort connector and 19-pin HDMI connector Network adapter RJ-45 connector USB 3.0 two USB 3.0 compliant connectors and one eSATA/USB 3.0 compliant connector Memory card reader Support upto SD4.0 Micro Subscriber Identity M ...

  • Dell E7240 - page 58

    Table 26. Touchpad Feature Specification Latitude 7240 Latitude 7440 Active Area: X-axis 98.8 mm 100 mm Y-axis 60.8 mm 47 mm Table 27. Battery Feature Specification Type • 3-cell “smart” Lithium ion • 4cell “smart” Lithium ion Dimensions: Latitude 7240 Latitude 7440 3–cell/4–cell Depth 80.75 mm (3.18 inches) 74.75 mm (2.94 inches) H ...

  • Dell E7240 - page 59

    Feature Specification Output power 65 W Output current 3.34 A (continuous) Rated output voltage 19.5 VDC Weight 0.51 lb (0.23 kg) Dimensions 0.87 x 2.60 x 4.17 inches (22 x 66 x 106 mm) Temperature range: Operating 0 °C to 40 °C (32 °F to 104 °F) Non-Operating –40 °C to 70 °C (–40 °F to 158 °F) Table 29. Physical Feature Latitude 7240 L ...

  • Dell E7240 - page 60

    ...

  • Dell E7240 - page 61

    8 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your are ...

Manufacturer Dell Category Webcam

Documents that we receive from a manufacturer of a Dell E7240 can be divided into several groups. They are, among others:
- Dell technical drawings
- E7240 manuals
- Dell product data sheets
- information booklets
- or energy labels Dell E7240
All of them are important, but the most important information from the point of view of use of the device are in the user manual Dell E7240.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Dell E7240, service manual, brief instructions and user manuals Dell E7240. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Dell E7240.

Similar manuals

A complete manual for the device Dell E7240, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Dell E7240 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Dell E7240.

A complete Dell manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Dell E7240 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Dell E7240, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Dell E7240, that we can find in the current document
3. Tips how to use the basic functions of the device Dell E7240 - which should help us in our first steps of using Dell E7240
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Dell E7240
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Dell E7240 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Dell E7240?

Use the form below

If you did not solve your problem by using a manual Dell E7240, ask a question using the form below. If a user had a similar problem with Dell E7240 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)