English dropdown-ico

Manual Chicago Electric 42933

24 pages 0.88 mb
Download

Go to site of 24

Summary
  • Chicago Electric 42933 - page 1

    RADIAL ARM SA W 8-1/4” 42933 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2000 b ...

  • Chicago Electric 42933 - page 2

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ........................... 3 GENERAL T OOL SAFETY W ARNINGS ..................................... 3 GROUNDING INSTRUCTIONS .... 5 1 10-120 V~ GROUNDED T OOLS: TOOLS WITH THREE PRONG PLUGS ............................................ 5 RADI ...

  • Chicago Electric 42933 - page 3

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...

  • Chicago Electric 42933 - page 4

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 4 USE RIGHT TOOL. Don’t force tool 8. or attachment to do a job for which it was not designed. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS (120 VOL T) NAMEPLA TE AMPERES (at full load) EXTENSION CORD LENGTH 25’ 50’ 100’ 150’ 0 – 6 18 16 16 14 6.1 – 10 18 16 14 ...

  • Chicago Electric 42933 - page 5

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 5 NEVER LEA VE TOOL RUNNING 21. UNA TTENDED. TURN POWER OFF . Don’t leave tool until it comes to a complete stop. GROUNDING INSTRUCTIONS TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION READ AND FOLLOW THESE INSTRUCTIONS: 1 10-120 V~ Grounded T ools: ...

  • Chicago Electric 42933 - page 6

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 6 The torque developed during brak- 2. ing may loosen the blade-retaining nut/bolt. The blade retaining nut/ bolt should be checked periodically and tightened if necessary , especially after braking. Wear eye protection. 3. Keep hands out of path of saw blade. 4. Know how to reduce ...

  • Chicago Electric 42933 - page 7

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 7 Essential Straight Push-stick Features and Functions Note: Straight style (traditional) stick shown. A dif- ferent stick design may be used if it properly protects against all hazards. Diagram not to scale. Push sticks must be made from sturdy , defect-free, • plywood or normal ...

  • Chicago Electric 42933 - page 8

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 8 Always use the anti-kickback nger 14. attachment when making rip cuts. Feed stock from the opposite end from the anti-kickback nger attach - ment. Only use 8 1/4” saw blades with 5/8” 15. arbor on this machine. Before making any adjustments 16. to the Radial Arm Saw , t ...

  • Chicago Electric 42933 - page 9

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 9 a chemical known to the State of California to cause cancer , and birth defects or other reproductive harm. W ash hands after handling. (Califor- nia Health & Safety Code § 25249.5, et seq. ) The warnings, precautions, and in- 31. structions discussed in this instruction man ...

  • Chicago Electric 42933 - page 10

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 10 REV 01c SPECIFICA TIONS Power Requirements 120 V~, 60 Hz, 1-ph 20.9 A (start); 6.9 A (load); 1330 W Motor 1-3/4 HP , 4200 spindle RPM, electric brake Saw Blade 8-1/4” (dia.) Arbor 5/8” Crosscut Distance 1 1” (maximum) Rip Cut Distance 20” (maximum) Depth of Cuts 45°: 2? ...

  • Chicago Electric 42933 - page 11

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 1 1 secure them by partially tightening the two screw clamps built into the Base assembly . Set the Arm (1 18) assembly column 6. into the Column Base. Move the Arm slightly to the left or right until the column index knob locks into the arm support column. The arm support column h ...

  • Chicago Electric 42933 - page 12

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 12 OPERA TING CONTROLS Elevating Handle (88) Y oke Pivot Clamp Handle (88) Safety Guard (10) Arm Index Knob (1 15) Screw Clamp (137) Switch (122) with Key (98) T rigger Bevel Index Knob (74) Bevel Lock Knob (71) Lock On Button Safety Guard Lock Knob (5) Anti-kickback Arm (13) ON / ...

  • Chicago Electric 42933 - page 13

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 13 and secure the arm angle for various miter positions. Positive index stops are 0, 15, 30, 45, and 60° (left and right). Non-index stops can also be set within the range of the arm assembly . Y oke Pivot - The Y oke Index Knob, located at the top of the Y oke (under the Carriage ...

  • Chicago Electric 42933 - page 14

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 14 ADJUSTMENTS The following checks, and possible adjust- ments, should be done in the order listed before beginning operation. W ARNING: For safety , unplug the line cord to the Radial Arm Saw . T ables A (127), B (126), and C (125) 1. are checked for straightness at the factory . ...

  • Chicago Electric 42933 - page 15

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 15 CUTTING KERF MARKS In order to move the Saw Blade into different cutting positions, kerf marks (or grooves) must be cut into the worktable. It is recommended to cut grooves into a piece of 1/4” plywood mounted to the sur- face of T able A. Cut a piece of 1/4” plywood the sam ...

  • Chicago Electric 42933 - page 16

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 16 OPERA TION W ARNING: The Radial Arm Saw can be very dangerous and cause serious injuries if not operated properly . Review all safety precautions be- fore operating. Keep hands out of the path of the moving Saw Blade. Cross Cutting 1. Secure the stock to be cut against the table ...

  • Chicago Electric 42933 - page 17

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 17 Bevel Cross Cutting 1. Loosen the Bevel Lock Knob (71) and pull out the Bevel Index Knob (74). T urn the motor assembly clockwise 2. or counterclockwise, selecting the desired angle (variable or indexed, i.e., 45°). T ighten the Bevel Lock Knob (71) and 3. push in the Bevel Ind ...

  • Chicago Electric 42933 - page 18

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 18 Slide the stock to be ripped into the 9. cutting area and verify that it slides easily beneath the Safety Guard, Anti-kickback Arm, and (optional) Spreader Plate, and there is no wobble space. Remove stock from cutting area. Press the green Switch (122), 10. squeeze the handle T ...

  • Chicago Electric 42933 - page 19

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 19 MAINTENANCE CAUTION: Before performing any main- tenance, remove the Line Cord from the electrical outlet. Y oke T ightness – Periodically check 1. and tighten the yoke Clamp Handle (66). Over time this handle may become loose and not tighten entirely . T o cor- rect this cond ...

  • Chicago Electric 42933 - page 20

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 20 T roubleshooting PROBLEM CAUSE SOLUTION Saw will not make a square crosscut or a good 60° mitre cut. Arm is not perpendicular to the rip fence 1. T oo much play between the arm and column 2. Y oke too loose when clamped to carriage 3. Dust between stock and rip fence 4. T able ...

  • Chicago Electric 42933 - page 21

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 21 Part Description Q’ty 1 Nameplate 1 2 Screw M5×8 2 3 W asher 5 1 4 Dust Guide 1 5 Y oke Index Knob 3 6 Nut M6 69 7 Guard Clamping Screw 1 8 Flexible Guard 1 9 Label 1 10 Safety Guard 1 11 Guard Plate 1 12 Spring W asher 5 1 13 Anti-kickback Arm Ass’y 1 14 Stud Bolt 1 15 Bol ...

  • Chicago Electric 42933 - page 22

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 22 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts. ASSEMBL Y DIAGRAM (1-97) ...

  • Chicago Electric 42933 - page 23

    SKU 42933 For technical questions, please call 1-800-444-3353. Page 23 ASSEMBL Y DIAGRAM (98-167) ...

  • Chicago Electric 42933 - page 24

    PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y . NEITHER THE MANUF ACTURER NOR DISTRIBUTOR MAKES ANY REPRESENT A TION OR W ARRANTY OF ANY KIND TO THE BUYER THA T HE OR SHE IS QUALIFIED TO MAKE ANY REP AIRS TO THE PRODUCT OR THA T HE OR SHE IS QUALIFI ...

Manufacturer Chicago Electric Category Saw

Documents that we receive from a manufacturer of a Chicago Electric 42933 can be divided into several groups. They are, among others:
- Chicago Electric technical drawings
- 42933 manuals
- Chicago Electric product data sheets
- information booklets
- or energy labels Chicago Electric 42933
All of them are important, but the most important information from the point of view of use of the device are in the user manual Chicago Electric 42933.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Chicago Electric 42933, service manual, brief instructions and user manuals Chicago Electric 42933. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Chicago Electric 42933.

Similar manuals

A complete manual for the device Chicago Electric 42933, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Chicago Electric 42933 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Chicago Electric 42933.

A complete Chicago Electric manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Chicago Electric 42933 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Chicago Electric 42933, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Chicago Electric 42933, that we can find in the current document
3. Tips how to use the basic functions of the device Chicago Electric 42933 - which should help us in our first steps of using Chicago Electric 42933
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Chicago Electric 42933
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Chicago Electric 42933 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Chicago Electric 42933?

Use the form below

If you did not solve your problem by using a manual Chicago Electric 42933, ask a question using the form below. If a user had a similar problem with Chicago Electric 42933 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)