English dropdown-ico

Manual Planet WNRT-300

75 pages Not applicable
Download

Go to site of 75

Summary
  • Planet WNRT-300 - page 1

    ...

  • Planet WNRT-300 - page 2

    Copyright Copyright  201 1 by PLANET T echnology Corp. All rights reserved. No p art of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without th ...

  • Planet WNRT-300 - page 3

    Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC radiation exposure se t forth for an uncontrol led environment. In order to avoid the possibilit y of exceeding the FCC radi o fr equency exposur e limits, human proximit y to the antenna shall not be less than 20 cm (8 inches) duri ng normal operat ...

  • Planet WNRT-300 - page 4

    Italy None If used outside of own premises, gener al authorization is required Luxembourg Non e General authorization required for net work and service supply(not for spectrum) Norway Implemented This subsection does not apply for the ge ographical ar ea within a radius of 20 km from the centre of Ny-Ålesund Russian Federation None Only for indoor ...

  • Planet WNRT-300 - page 5

    CONTENTS Chapter 1. Produc t Intro duction ................................................................................................ .......... 1 1.1. Package Contents ......................................................................................................... 1 1.2. Product Description .......................................... ...

  • Planet WNRT-300 - page 6

    V 4.6. Fi rewall .................................................................................................................. ...... 37 4.6.1. Port Filterin g ...................................................................................................... 38 4.6.2. IP F iltering .......................................................... ...

  • Planet WNRT-300 - page 7

    User ’s Man ual of WNRT -300 -1- Chapter 1. Product Introduction 1.1. Package Content s The following items should be contained in the package: WNRT-300 Port able AP/Router Power Adapt er USB Cable Ethernet Cable Li-ion Battery Quick Inst allation Guide CD-ROM (User ’s Manual i ncluded) If there is any item missed or damage d, please contact th ...

  • Planet WNRT-300 - page 8

    User ’s Man ual of WNRT -300 -2- Built-in High Cap a city Battery The WNRT -300 has one built-in rech argeable lithium battery and it s power supplied through mini USB interface. The power can be directly cha rged vi a the computer's USB port whi ch increases the convenience even when there is n o power outlet available. One-touch Secure Wir ...

  • Planet WNRT-300 - page 9

    User ’s Man ual of WNRT -300 -3-  Compliant with IEEE 802.1 1n wireless techno logy capable of up to 150Mbps dat a rate  Backward compatible with 802.1 1b/g standard  Equipped wit h one 10/100Mbps RJ-45 Ethernet port for LAN/ W AN, Auto MDI/MDI-X supported  Wireless Network Range Extender  Multiple Wireless Modes: AP , WDS, Repeate ...

  • Planet WNRT-300 - page 10

    User ’s Man ual of WNRT -300 -4- 1.4. Product S pecification Product WNRT -300 150Mbps 802.1 1n W ireless AP / Router Hardware Specification Interface LAN/W AN 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port Gain: 1 x Internal 2dBi Antenna Antenna Orientation: Omni-directional Button/Switch Front panel (from left to right): Mode Selection Switch (Router/ ...

  • Planet WNRT-300 - page 11

    User ’s Man ual of WNRT -300 -5- Wireless Mode  AP  WDS  Repeater (WDS+AP)  Universal Repeater (AP+Client) Encryption Security WEP (64/128-bit) encryption security WP A-Enterpris e / WP A2-Enterprise (TKIP/AES) WP A-Personal / WP A2-Personal (T KIP/AES) 802.1x Authentication Provide wireless LAN ACL (Acc ess Control List) filtering Wi ...

  • Planet WNRT-300 - page 12

    User ’s Man ual of WNRT -300 -6- Humidity Operating: 10 ~ 90% (Non-C ondensing) S torage: 5 ~ 90 % (Non-Condensing) ...

  • Planet WNRT-300 - page 13

    User ’s Man ual of WNRT -300 -7- Chapter 2. Hardware Interface 2.1. Overview Front Panel Figure 2-1 Rear Panel Figure 2-2 Object Description WPS Button Press the button for about 5 secon ds to activate the WPS function. Reset Reset the WNRT-300 to the factory default settings by holding the Reset button and pressing dow n for about 5 second s. 2. ...

  • Planet WNRT-300 - page 14

    User ’s Man ual of WNRT -300 -8- Figure 2-3 T op Panel LED Definition LED COL OR ST A TE FUNCTION On Device power on Off Device power off Power Green Flash Low batte ry power Flash T he Wireless function is enabled. WLAN Blue Off The Wireless function is disabled. On WPS is activated WPS Blue Off WPS is not activated On Link is established Off No ...

  • Planet WNRT-300 - page 15

    User ’s Man ual of WNRT -300 -9- Chapter 3. Installation Guide 3.1. System Requirement s Broadband Internet Access Service (Cab le / xDSL / Ethernet connection) One Cable/xDSL Modem that has an RJ-45 co nn ector (not necessary if the WNR T -300 is connected directly to the Ethernet.) PCs with a working Ethernet Adapter and an Ethernet cable with ...

  • Planet WNRT-300 - page 16

    User ’s Man ual of WNRT -300 -10- 3.2.2. AP Mode In AP Mode, the NA T (Network Address T ranslation) function and DHCP server are both disabled, and all wireless clients obtain the IP address from t he network device connected with LA N port of the WNRT -300. T hey can certainly assign the IP address for themselves as well in the Contro l Panel o ...

  • Planet WNRT-300 - page 17

    User ’s Man ual of WNRT -300 -1 1- 3.3. Manual Network Setup - TCP/IP Configuration The default IP address of the WNRT -300 is 192.168.1.1, and the default Subnet Mask is 255.255.255.0 . These values ca n be changed as you desire in the web UI of the WNRT -300. In this section, we use all the default values for description. No matter you want to ...

  • Planet WNRT-300 - page 18

    User ’s Man ual of WNRT -300 -12- 3) In the prompt window shown bel ow , double click on the Internet Protocol (TCP/IP) . Figure 3-5 4) Choose Obt ain an IP address au tomatically , and Obt ain DNS server automatically as shown in the figure below . Th en click OK to save your settings. Figure 3-1 ...

  • Planet WNRT-300 - page 19

    User ’s Man ual of WNRT -300 -13- 3.3.2. Configure the IP address manually If you are sure the DHCP server of WNRT -300 is disabled (the default setting of AP Mode and Client Mode ), you can configure the IP ad dress manua lly . The IP addre ss of your PC should be 192.168.1.xxx (the same sub net of the IP address of WNR T -300, and "xxx&quo ...

  • Planet WNRT-300 - page 20

    User ’s Man ual of WNRT -300 -14- 3.4. Hardware Inst allation Please follow the instruction below to build the wireless network co nnection between WNR T -300 and your computers. Before you st art using the WNR T -300, please follow the procedure s below to install and ch arge the battery . Ste p 1 : Remove the battery cover , and insert the atta ...

  • Planet WNRT-300 - page 21

    User ’s Man ual of WNRT -300 -15- Figure 3-4 Step 2. Please turn on the WNRT -300. Figure 3-6 The procedures of hardware installation are finish ed. Please continuously follo w the next section to start setup in the web UI. If you want to configure the WNR T -300 via wireless connection, please use your PC to site survey the wireless signal of WN ...

  • Planet WNRT-300 - page 22

    User ’s Man ual of WNRT -300 -16- Figure 3-5 3.5. S t arting Setup in Web UI It is easy to configure and mana ge the WNRT -300 vi a web browser . T o access the web UI of the WNRT -300, please open a web browser and e nter the default IP address http://192.168.1.1 in the address field of the browser . Figure 3-7 After a moment, a login wi ndow wi ...

  • Planet WNRT-300 - page 23

    User ’s Man ual of WNRT -300 -17- Figure 3-8 Login Window Default User name: admin Default Password: admin If the above screen does not pop up, it may mean that your web-browser has been set to a proxy . Go to T ools menu>Internet Options>Co nnections>LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK ...

  • Planet WNRT-300 - page 24

    User ’s Man ual of WNRT -300 -18- Chapter 4. Configuration in Web UI 4.1. Login After successfully logging i nto the web UI of the WNR T -300, you will see the main menus on the lef t side of the web-based utility . There are some differ ent options appear as the o peration mode changes. For example, the figure below is the menus of Router Mode i ...

  • Planet WNRT-300 - page 25

    User ’s Man ual of WNRT -300 -19- Step 1. The figure below is the screen of the Setup Wizard in Router Mode. Please click the “Next>>” button to continue. Figure 4-2 Step 2. Please select the corresponding W AN connection ty pe of your Internet service, and fill the correct para meters in the blanks. Then click the “Finished” button ...

  • Planet WNRT-300 - page 26

    User ’s Man ual of WNRT -300 -20- AP Mode Step 1. The figure below is the screen of the Setup Wi zard in AP Mode. Please click the “Next>>” button to continue. Figure 4-4 Step 2. Please enter the SSID for recogni zing the wi reless con nection. The default setting i s “default”. The n click the “Next>>” button to continue. ...

  • Planet WNRT-300 - page 27

    User ’s Man ual of WNRT -300 -21- Step 3. Please select the wireless security mod e, and setup the password for wireless connection. Then click the “Finished” button to save the setting s and reboot to take ef fect. Figure 4-6 Client Mode Step 1. The figure below is the screen of the Set up Wizard in Client Mode. Please click the “Next>& ...

  • Planet WNRT-300 - page 28

    User ’s Man ual of WNRT -300 -22- Figure 4-7 Step 2. Please enter the SSID of the AP you wan t to c onnect with, or you can click the “Sit e Survey” button to search the available local AP . The details of the availabl e AP will appear . Then choose the AP you want to conn ect to, and click the “Next>>” button to continue. Figure 4- ...

  • Planet WNRT-300 - page 29

    User ’s Man ual of WNRT -300 -23- Figure 4-9 4.3. Operation Mode This page sh ows the current operat ion mode, but u sers can only c hange it by shif ting the hardware switch on the WNR T -300. Figure 4-10 ...

  • Planet WNRT-300 - page 30

    User ’s Man ual of WNRT -300 -24- 4.4. Wireless The Wireless menu cont ains submenus of the settings about wi reless network. Please refer to the following sections for the details. Figure 4-1 1 4.4.1. Basic Settings Choose me nu “ Wireless  Basic Settings ”, and you can configure the basic settings for the wireless network in this pag e. ...

  • Planet WNRT-300 - page 31

    User ’s Man ual of WNRT -300 -25- Object Description Disable Wireless LAN Interface Check the box to disable the wireless function. Band Select the desired mode. Default is “ 2.4GHz (B+G+N) ”. It is strongly recommended that you set the Band to “2.4GHz (B+G+N)”, and all of 802.1 1b, 802.1 1g, and 802.1 1n wireless st ations can connect to ...

  • Planet WNRT-300 - page 32

    User ’s Man ual of WNRT -300 -26- Broadcast SSID If you enable “Broadcast SSID”, every wireless st ation located within the coverage of the WNR T -300 can discover it s signal easily . If you are building a public wireless network, enabling this feature is recommended. In private network, disabli ng “Broadcast SSID” can provide better wir ...

  • Planet WNRT-300 - page 33

    User ’s Man ual of WNRT -300 -27- Figure 4-13 Wireless Advanced Settings Object Description Fragment Threshold Y ou can specify the maximum si ze of p acket during the fragment ation of data to be transmitted. If you set th is value too low , it will result in bad performance. Default is “2346”. RTS Threshold When the p acket size i s smaller ...

  • Planet WNRT-300 - page 34

    User ’s Man ual of WNRT -300 -28- Protection It is recommended to enable the prote ction mechanism. This mechanism can decre ase the rate of data colli sion between 802.1 1b and 802.1 1g wireless st ations. When the protection mode is ena bled, the throughput of the AP will be a little lower due to many of frame traffic sh ould be transmitted. De ...

  • Planet WNRT-300 - page 35

    User ’s Man ual of WNRT -300 -29- 4.4.3. Security Choose menu “ Wireless  Security ”, and you can configure the settings of wireless security for the wireless network in this p age. After the config uratio n, please click the “Ap ply Changes” button to save the settings. Figure 4-14 Wireless Security Object Description Select SSID Sele ...

  • Planet WNRT-300 - page 36

    User ’s Man ual of WNRT -300 -30- 802.1x Authentication Enable 802.1x authentication function, then please enter the IP Address , Port , and Password of the Radius Server. 4.4.4. Access Control Choose menu “ Wireless  Access Control ”, you can cho ose to allow or deny the computer of specified MAC address to connect with the WNR T -300 in ...

  • Planet WNRT-300 - page 37

    User ’s Man ual of WNRT -300 -31- 4.4.5. WDS Settings Wireless Distribution System (WDS) uses wireless media to communi cate with other APs, like the Ethernet does. T o do this, you must set these APs i n the same channel and set MAC a ddress of other APs which you want to communicate with in the t able and then enable the WDS. Choose menu “ Wi ...

  • Planet WNRT-300 - page 38

    User ’s Man ual of WNRT -300 -32- Current WDS AP List Y ou can select some MAC address of the AP , and click the “Delete Selected” button to delete it. 4.4.6. Site Survey Choose menu “ Wireless  Site Survey ” to scan the available local AP . If any Access Point is found, you could choose any one to conne ct with manually when the Clien ...

  • Planet WNRT-300 - page 39

    User ’s Man ual of WNRT -300 -33- 4.4.7. WPS Choose menu “ Wireless  WPS ”, and you can configure the setting for WPS (Wi-Fi Protected Setup). After the configuratio n, please click the “Apply Changes” button to save the settings. Figure 4-18 WPS (Wi-Fi Protected Setup) Object Description Disable WPS Y ou can check the box to disable t ...

  • Planet WNRT-300 - page 40

    User ’s Man ual of WNRT -300 -34- Figure 4-19 Wireless S c hedule 4.5. TCP/IP Settings The TCP/IP Settings men u contains su bmenus of the settings about LAN an d W AN. Please refer t o the following sections for the det ails. Figure 4-20 4.5.1. LAN Interface Choose menu “ TCP/IP Settings  LAN Interface ”, and you can configure th e parame ...

  • Planet WNRT-300 - page 41

    User ’s Man ual of WNRT -300 -35- Figure 4-21 LAN Interface Object Description IP Addres s The LAN IP address of the WNR T -300, and default is 192.168.1.1 . Y ou can change it accordi ng to your request. Subnet Mask Default is 255.255.255.0 . Y ou can change it according to your request. Default Gateway Default is 0.0.0.0 . Y ou can change it ac ...

  • Planet WNRT-300 - page 42

    User ’s Man ual of WNRT -300 -36- 4.5.2. WAN Interface Choose menu “ TCP/IP Settings  WA N I n t e r f a c e ”, and you can configu re the parameters for the Internet network. After the configuratio n, please cl ick the “Apply Changes” button to save the settings. Figure 4-22 W AN Interface Object Description W AN Access T ype Please s ...

  • Planet WNRT-300 - page 43

    User ’s Man ual of WNRT -300 -37- Enable Ping Access on W AN Check the box to enable Ping access from the Interne t Network. Enable Web Serv er Access on W AN Check the box to enable the web server access of the WNRT -300 from the Internet network. Enable IPsec p ass through on VPN connection Check the box to enable IPsec p ass through function o ...

  • Planet WNRT-300 - page 44

    User ’s Man ual of WNRT -300 -38- 4.6.1. Port Filtering Choose menu “ Firewall  Port Filtering ”, and you can configure which port range and protocol to be restricted. After the configuration, please click the “Apply Chan ge s” button to save the settings. Figure 4-24 Port Filtering Object Description Enable Port Filtering Enable port ...

  • Planet WNRT-300 - page 45

    User ’s Man ual of WNRT -300 -39- 4.6.2. IP Filtering Choose menu “ Firewall  IP Filtering ”, and you can configure which IP address and protocol to be restricted. After the configuration, please click the “Apply Chan ge s” button to save the settings. Figure 4-25 IP Filtering Object Description Enable IP Filtering Enable IP filtering ...

  • Planet WNRT-300 - page 46

    User ’s Man ual of WNRT -300 -40- Figure 4-26 MAC Filtering Object Description Enable MAC Filtering Enable MAC filtering MAC Address Add MAC address you want to control Comment The description of this setting Check the “Select” box of which rule you want to delete, and then click the “Delete Selected” button to delete it. 4.6.4. Port Forw ...

  • Planet WNRT-300 - page 47

    User ’s Man ual of WNRT -300 -41- Figure 4-27 Port Forwarding Object Description Enable Port Forwarding Enable Port Forwarding function IP Addres s Add LAN IP address of specified host or server on the private local network Protocol Select the port number protocol type (TCP , UDP or both). If you are unsure, then leave it to the default both prot ...

  • Planet WNRT-300 - page 48

    User ’s Man ual of WNRT -300 -42- 4.6.5. URL Filtering Choose menu “ Firewall  URL Filtering ”, and you can configure which UR L addresses to be blocke d. After the configuratio n, please click the “Apply Changes” button to save the settings. Figure 4-28 URL Filtering Check the “Select” box of which rule you want to delete, and the ...

  • Planet WNRT-300 - page 49

    User ’s Man ual of WNRT -300 -43- Figure 4-29 DMZ Object Description Enable DMZ Check the box to enable DMZ function. If the DMZ Ho st Function is enabled, it means that you set up DMZ host at a parti cular computer to be exposed to the Internet so t hat some applications/software, especially Internet / online game can have two way conne ctions. ...

  • Planet WNRT-300 - page 50

    User ’s Man ual of WNRT -300 -44- Choose menu “ Firewall  VLAN ”, and you can configure the settings of virtual LAN. VLAN refers to a group of logically networked devices on one or more LANs, so that they can communicate with each other as if they were attached to the sa me wire. In fact, they are located on dif ferent LAN segments. VLAN a ...

  • Planet WNRT-300 - page 51

    User ’s Man ual of WNRT -300 -45- 4.7. QoS The QoS (Quality of Service) func tion will improve the netwo rk performance of th e specified comput er by ensuring that it s network traf fic is prioritized ov er others’. After the configu ration, please click the “Apply Changes” button to save the settings. Figure 4-31 QoS Object Description En ...

  • Planet WNRT-300 - page 52

    User ’s Man ual of WNRT -300 -46- Automatic Downlink Speed Check the box to adjust the downl ink speed automatically by the WNRT -300. Or enter the downlink dat a rate manually in the field below . QoS Rule Setting T o set the priority rule, y ou can appoint the computer by IP address or MAC address, and enter it in the correct field. Select mini ...

  • Planet WNRT-300 - page 53

    User ’s Man ual of WNRT -300 -47- 4.9. Management The Management menu cont ains submenus of the gener al settings of the WNR T -300. Please refer to the following sections for the det ails. Figure 4-33 4.9.1. Status Choose menu “ Management  Sta tu s ” to show the current st atus and som e basic settings of the WNRT -300. Figure 4-34 S tat ...

  • Planet WNRT-300 - page 54

    User ’s Man ual of WNRT -300 -48- 4.9.2. Statistics Choose menu “ Management  St atistics ” to show the p acket counters for transmission an d reception regarding to wireless and Ethe rnet network. Figure 4-35 S tatistics Item Description Wireless LAN Sent Packets It shows the statistic count of sent p a cket s on the wireless LAN interfac ...

  • Planet WNRT-300 - page 55

    User ’s Man ual of WNRT -300 -49- 4.9.3. DDNS Choose menu “ Management  DDNS ” to configure the settings about Dynamic DNS. Dynamic DNS is a kind of service that provides users with a valid, u nchanging internet domain name (an URL) to go with that (possibly ever changing) IP address. Af te r the configuration, pleas e click the “Apply C ...

  • Planet WNRT-300 - page 56

    User ’s Man ual of WNRT -300 -50- 4.9.4. Time Zone Setting Choose menu “ Management  Time Zone Setting ” to configure the sy stem time. Y ou can also maintain the system time by synchro nizing with a public time server over the Internet. Af ter the configuration, please click the “Apply Ch anges” button to save the settings. Figure 4-3 ...

  • Planet WNRT-300 - page 57

    User ’s Man ual of WNRT -300 -51- Figure 4-38 Denial of Service Object Description Enable DoS Prevention Check to enable DoS function. User ma y set other rel ated configurations about DoS below 4.9.6. Log Choose menu “ Management  Log ” to configure the settings of system log. Y ou can check the box of ...

  • Planet WNRT-300 - page 58

    User ’s Man ual of WNRT -300 -52- the items you want to record it in the log. Afte r the configuration, pleas e click the “Apply Changes” button to save the settings. Figure 4-39 System Log Object Description Enable Log Check to enable log function. System all/Dos Select which log you want to check. Rela ted information will be shown at below ...

  • Planet WNRT-300 - page 59

    User ’s Man ual of WNRT -300 -53- Figure 4-40 Upgrade Firmware Object Description Select File Browse and select file you want to upgrade and press Upload to perform upgrade. Please wait till on screen sho ws related information after upgrade finished. 4.9.8. Save/Reload Settings Choose menu “ Management  Save/Reload Settings ” to backup or ...

  • Planet WNRT-300 - page 60

    User ’s Man ual of WNRT -300 -54- Reset Settings to Default Click the “Reset” button to reset all settings of the WNRT -300 to factory default. 4.9.9. Passw ord Choose menu “ Management  Password ” to change the user name and p assword which is inputted to access the web UI of the WNRT -300. Figure 4-42 Password Setup Object Descriptio ...

  • Planet WNRT-300 - page 61

    User ’s Man ual of WNRT -300 -55- Chapter 5. Quick Connection to a Wireless Network 5.1. Windows XP (Wireless Zero Configuration) Ste p 1 : Right-Click on the wireless network icon displayed in the system tray Figure 5-1 Ste p 2 : Select [ View Av ailable Wireless Networks ] Ste p 3 : Highlight and select the wireless network (SSID) to conne ct ( ...

  • Planet WNRT-300 - page 62

    User ’s Man ual of WNRT -300 -56- Ste p 4 : Enter the encryption key of the Wireless Ro uter (1) The Wireless Network Connection box will appear (2) Enter the encryption key that configured in section 4.4.3 (3) Click the [Connect] button Figure 5-3 Ste p 5 : Check if “ Connected ” is displayed Figure 5-4 ...

  • Planet WNRT-300 - page 63

    User ’s Man ual of WNRT -300 -57- Some laptops are equi pped with an “Wi-Fi ON/OFF” hardware switch for the internal wireless LAN. Make sure t he it is switched to “ON” position. 5.2. Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 and can be used to detect and connect to wireless network. This built-in wirel ...

  • Planet WNRT-300 - page 64

    User ’s Man ual of WNRT -300 -58- Figure 5-7 If you want to connect to this Wireless Rout er in the future, please check the box of [ Connect automatically ]. Ste p 3 : Enter the encryption key of the Wireless Ro uter (1) The [Connect to a Network] box will appear (2) Enter the encryption key that configured in section 4.4.3 (3) Click the [OK] bu ...

  • Planet WNRT-300 - page 65

    User ’s Man ual of WNRT -300 -59- Figure 5-8 Figure 5-9 Ste p 4 : Check if “ Connected ” is displayed Figure 5-10 ...

  • Planet WNRT-300 - page 66

    User ’s Man ual of WNRT -300 -60- 5.3. Mac OS X Ste p 1 : Right-Click on the network icon displayed in the system tray The AirPort Network C onnection menu will appear Figure 5-1 1 Ste p 2 : Highlight and select the wireless network (SSID) to conne ct (1) Select and SSID [ default ] (2) Double-click on the selected SSID Figure 5-12 Ste p 3 : Ente ...

  • Planet WNRT-300 - page 67

    User ’s Man ual of WNRT -300 -61- Figure 5-13 If you want to connect to this Wireless Router in the future, please che ck [ Remember this network ]. Ste p 4 : Check if the AirPort is connec t to the selected wireless network. If “Y es”, then there will be a “check” symbol in front of the SSID. Figure 5-14 ...

  • Planet WNRT-300 - page 68

    User ’s Man ual of WNRT -300 -62- There is another way to configure the MAC OS X Wireless settings: Ste p 1 : Click and open the [ System Preferences ] by going to Apple > System Preference or Applications Figure 5-14 Ste p 2 : Open Network Preference by clicking on the [ Network ] icon Figure 5-15 ...

  • Planet WNRT-300 - page 69

    User ’s Man ual of WNRT -300 -63- Ste p 3 : Check Wi-Fi setting and select the available wirel ess network (1) Choose the AirPort on the left-menu (make sure it is ON) (2) Select Network Name [default] here If this is the first time to connect to the Wireless Router , it should shows “Not network selected”. Figure 5-16 ...

  • Planet WNRT-300 - page 70

    User ’s Man ual of WNRT -300 -64- 5.4. iPhone / iPod T ouch / iPad Ste p 1 : T ap the [ Settings ] icon di splayed in the home screen Figure 5-17 Ste p 2 : Check Wi-Fi setting and select the available wirel ess network (3) T ap [ General ] [ Network ] (4) T ap [ Wi-Fi ] If this is the first time to connect to the Wireless Router , it should app ...

  • Planet WNRT-300 - page 71

    User ’s Man ual of WNRT -300 -65- Figure 5-19 Ste p 3 : T ap the target wire less network (SSID) in “ Choose a Network… ” (1) Turn on Wi-Fi by tapping “ Wi-Fi ” (2) Selec t SSID [ default ] Figure 5-20 Ste p 4 : Enter the encryption key of the Wireless Ro uter (1) The password input screen will be displayed (2) Enter the encryption key ...

  • Planet WNRT-300 - page 72

    User ’s Man ual of WNRT -300 -66- Figure 5-21 Ste p 5 : Check if the iDevice is connected to the selected wireless n etwork. If “Y es”, then there will be a “check” symbol in front of the SSID. Figure 5-22 ...

  • Planet WNRT-300 - page 73

    User ’s Man ual of WNRT -300 -67- Appendix Malfunction Solution The WNRT -300 is not responding to me when I want to access it via web browser Please check the connecti on of power cord and network cable of the WNRT -300. All cords and cables sho uld be correctly and firmly inserted to the device. If all LEDs on the WNR T -300 are of f, please ch ...

  • Planet WNRT-300 - page 74

    User ’s Man ual of WNRT -300 -68- h. Try to use IP address instead of hostname. If you can access a remote serve r by an IP address but not by a hostname, please check the DNS setting. Unable to be found by the wirele ss clie nts a. Che ck if the “Broadcast SSID” is disabl ed. b. Are you too far from the WNRT -300? T ry to get closer . c. Ple ...

  • Planet WNRT-300 - page 75

    EC Declaration of Conformity For the following equipment: *T ype of Product: 150Mbps 802.1 1n W ireless Portable AP / Router *Model Number: WNR T -300 * Produced by: Manufacturer‘s Name : Planet T echno logy Corp. Manufacturer‘s Address: 10F ., No.96, Minquan Rd., Xindian Dist., New T aipei City 231, T aiwan (R.O.C.) is herewith confirmed to co ...

Manufacturer Planet Category Router

Documents that we receive from a manufacturer of a Planet WNRT-300 can be divided into several groups. They are, among others:
- Planet technical drawings
- WNRT-300 manuals
- Planet product data sheets
- information booklets
- or energy labels Planet WNRT-300
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planet WNRT-300.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planet WNRT-300, service manual, brief instructions and user manuals Planet WNRT-300. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planet WNRT-300.

Similar manuals

A complete manual for the device Planet WNRT-300, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planet WNRT-300 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planet WNRT-300.

A complete Planet manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planet WNRT-300 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planet WNRT-300, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planet WNRT-300, that we can find in the current document
3. Tips how to use the basic functions of the device Planet WNRT-300 - which should help us in our first steps of using Planet WNRT-300
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planet WNRT-300
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planet WNRT-300 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planet WNRT-300?

Use the form below

If you did not solve your problem by using a manual Planet WNRT-300, ask a question using the form below. If a user had a similar problem with Planet WNRT-300 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)