English dropdown-ico

Manual Heat & Glo LifeStyle 350TRSILP-AUF

80 pages 12.12 mb
Download

Go to site of 80

Summary
  • Heat & Glo LifeStyle 350TRSILP-AUF - page 1

    1 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Models: 350TRSI-AUF 350TRSILP-AUF Owner ’ s Manual Installation and Operation • DO NOT USE OR STORE FLAMMABLE MA TERIALS NEAR THIS APPLIANCE. • DO NOT SPRA Y AEROSOLS IN THE VICIN- ITY OF THIS APPLIANCE WHILE IT IS IN OPERA TION. • What to do if you smell gas - D ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 2

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 2 M O D E L S: 3 50 T RS I -A UF , 35 0T RS IL P- AU F ARE SAI GLOBAL APPROVED FOR NA TU RAL GAS, PRO P ANE OR BUT ANE AS A BALANCED FLUE HEA TER. Refer to the appliance data plates for gas consumptions and pressures. Installation of this appliance should only be carried o ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 3

    3 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Model Name: ___________________________________________ Date purchased/installed: __________________ Serial Number: __________________________________________ Location on replace: _____________________ Dealership purchased from: _______________________________ Dealer ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 4

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 4 FOR YOUR SAFETY This appliance is designed to operate on LPG IF YOU SMELL GAS: • T urn off as supply at bottle • Extinguish all naked  ames • Do not operate any electrical appliances • V entilate the area • Check for leaks as detailed in this manual If odor ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 5

    5 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury . • CAUTION! Indicate ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 6

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 6  = Contains updated information. B. IntelliFire Plus™ Ignition System Wiring . . . . . . . . . . . . . 54 C. Optional Accessories Requirements . . . . . . . . . . . . . . . . 54 D . B l o w e r ....................................... 5 5 E. Control Module Operation ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 7

    7 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 AUSTRALIAN W ARRANTY INFORMA TION W arranty information in the attached manual is for international markets, not Australia. For Australian warranty information, please see below . Hearth & Home T echnologies Inc (HHT) 7571 215th Street West, Lakeville, MN 55044 001 1 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 8

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 8 W arranty Period Heat & Glo Manufactured Appliances and V enting Components Covered Parts Labor Gas Wood Pellet EP A Wood Coal Electric V enting 5 years 1 years X X Castings & baf es 7 years 3 years X X X Manifold tubs HEA T & GLO chimney and termination 1 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 9

    9 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 • Non Heat & Glo venting components, hearth components or other accessories used in conjunction with the appliance. • Any part of a pre-existing  replace system in which an insert or a decorative gas appliance is installed. • Removal, installation, reinstall ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 10

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 10 A. Appliance Certication 1 Listing and C ode Approv al s MODELS: 350TRSI-AUF , 350TRSILP-AUF LABORA TORY : SAI Global TYPE: Gas Space Heating Appliance ST ANDARD: AS4553:2008 C. High Altitude Installations NOTICE:  If the heating value of the gas has been ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 11

    1 1 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate replace before read - ingand understandingoperating instructions. Failure to operate replace according to operating instructions could cause re or i ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 12

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 12 D. Clear Space W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re. See Figure 2.2. Avoid placing candles and other heat-sensitive objects on mantel or hearth. Heat may damage these objects. F ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 13

    13 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 I. Lighting Instructions (IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand. 2. Wait ve (5) minu tes to cle ar out any gas. The n smell for gas, inclu din g near the oor . If yo ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 14

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 14 Not e: If t he module is in LOCK- OUT mode, reset ting the cir cuit br eaker to the app lianc e will al so reset t he mod ule. Not e: For unit s inst alled in Australia, the res idence’s 220/ 240 wall out let to whi ch th is appl ianc e’ s powe r co rd is c onne cte ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 15

    15 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 K. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool. • Remove xed glass assembly . See Section 9.E. • Cl ean xed gla ss a ss ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 16

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 16 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle xed glass assembly with care. Glass is breakable. • Avoid striking, scratching or slammi ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 17

    17 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 B. Maintenance T asks-Qualied Service T echnician The following tasks must be performed by a qualied ser- vice technician. Gasket Seal and Glass Assembly Inspection Frequency: Annually By: Qualied Service T echnician T ools needed: Protective gloves, drop cloth ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 18

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 18 A. T ypical Appliance System NOTICE:  Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Figure 4.1 T ypical System CEILING FIRES ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 19

    19 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 B. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to op - erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside of the building. No additional outside air source i ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 20

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 20 5 F raming and C learances A. Selecting Appliance Location Whe n sel ect ing a loca tio n for th e app lia nce it is imp ort an t to con sid er the r equ ire d c lea ra nce s t o w all s (se e F igu re 5.1). W ARNING! Risk of Fire or Burns! Provide ade ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 21

    21 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 B. Constructing the Appliance Chase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system. In cooler climates the vent should be enclosed inside the chase. NOTICE: T reatment of ceiling restops and wall shield restop ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 22

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 22 Figure 5.3 Clearances to Combustibles NOTE: FRAME OPENING HEIGHT IS GREA TER THAN PLASTER OPENING HEIGHT . E 1 in. (25 mm) H G J F I C B D A * Adjust framing dimensions for interior sheathing (such as sheetrock) C** Add 12 in. (305 mm) for rear venting with one 90º elb ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 23

    23 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 D. Mantel and W all Projections W AR NI NG!  R isk  o f F ir e! Co mp ly w it h al l m in imu m cle ar - an ces a s spe ci ed. Fra min g or n i sh ing ma ter ial clo ser th an th e mi ni mum s li st ed m us t be co ns tr uc ted e nt ire ly o f n on - c ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 24

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 24 A. V ent T ermination Minimum Clearances Figure 6.1 Minimum Height From Roo f T o Lowest Discharge Opening 6 T er mination Locations Fire Risk. Maintain vent clearance to combustibles as specied. • DO NOT pack air spac e with insul ati on or oth er materials. Fail ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 25

    25 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 6.3 Minimum Clearances for T ermination NOTES: 1. All distances are measured vertically or horizontally along the wall to a point in line with the nearest part of the terminal. 2. Prohibited area below electricity meter or fuse box extends to ground level. 3. See ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 26

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 26 A. Approved Pipe This appliance is approved for use with Hearth & Home T echnologies DVP and SLP venting systems. Refer to Section 16.B for vent component information. DO NOT mix pipe, ttings or joining methods from differ- ent manufacturers. The pipe is tested t ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 27

    27 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 7.4 T op V ent - Horizontal T ermination Note: A 6 in. (152 mm) section of straight ue must be attached to the heater before a 90° elbow . Fire Risk. Explosion Risk. Do NOT pack insulation or other combustibles between ceiling restops. • AL WA YS maintai ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 28

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 28 T op V ent - Horizontal T ermination - (continued) Figure 7.5 T wo Elbows V 1 Minimum H 1 + H 2 Maximum Elbow only Not allowed 6 in. 152 mm 1 ft. 305 mm 1 ft. 305 mm 2 ft. 610 mm 2 ft. 610 mm 4 ft. 1.22 m 3 ft. 914 mm 6 ft. 1.83 m 4 ft. 1.22 m 8 ft. 2.44 m 5 ft. 1.52 m ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 29

    29 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 T op V ent - Horizontal T ermination - (continued) Figure 7.6 Three Elbows V 1 Min. H 1 Max. V 2 Min. H 2 Max. 6 in. 152 mm 1 ft. 305 mm 1 ft. 305 mm 1 ft. 305 mm 1 ft. 305 mm 2 ft. 610 mm 2 ft. 610 mm 2 ft. 610 mm 2 ft. 610 mm 2 ft. 610 mm 3 ft. 914 mm 4 ft. 1.22 m 3 f ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 30

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 30 T op V ent - V ertical T ermination This model is approved to use DVP or SLP Series ue pipe components. A DVP-TVHW or SLP-TVHW vertical Termination Cap must be used to terminate ue systems in a vertical position. Approved ue system components are labeled for id ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 31

    31 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 7.9 Flue Components and T erminations MODEL 350TRSI-AUF 350TRSILP-AUF FLUE TERMINA TION APPROV ALS DVP-TRAP2 HORIZONT AL TERMINA TION CAP DVP-FBHT HORIZONT AL TERMINA TION CAP DVP-TVHW VERTICAL TERMINA TION CAP Flue System Approvals And Installations These models ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 32

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 32 Figure 7.10 T wo Elbows V 1 H 1 Maximum V 2 V 1 + V 2 Min. Elbow only Not allowed * * * 6 in. 152 mm 2 ft. 610 mm * * * 1 f t. 305 mm 4 ft. 1.22 m * * * 2 ft. 610 mm 6 ft. 1.83 m * * * 3 ft. 914 mm 8 ft. 2.44 m * * * 4 ft. 1.22 m 12 ft. 3.66 m * * * 5 f t. 1.52 m 16 ft. ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 33

    33 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 7.1 1 T op V ent - V ertical T ermination - (continued) Three Elbows V 1 H 1 + H 2 V 2 V 1 + V 2 Minimum H 1 + H 2 Maximum Elbow only 1 ft. 305 mm * * * 1 ft. 305 mm 6 in. 152 mm 2 ft. 610 mm * * * 2 ft. 610 mm 1 ft. 305 mm 2 ft. 610 mm * * * 2 ft. 610 mm 2 ft. 6 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 34

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 34 Rear V ent - Horizontal T ermination Figure 7.13 No Elbow One 45º Elbow H 1 H 1 Minimum H 1 Maximum 6-1/2 in. (165 mm) 18 in. (457 mm) Do not use a 45º elbow in corner installations. Use two 90º elbows instead. Figure 7.12 H USE DVP SERIES COMPONENTS ONL Y USE DVP SE ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 35

    35 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Rear V ent - Horizontal T ermination - (continued) T wo Elbows Figure 7.14 Figure 7.15 Three Elbows USE DVP SERIES COMPONENTS ONL Y USE DVP SERIES COMPONENTS ONL Y H 1 H 2 V 1 INSTALLED HORIZONTALLY H 3 H 1 H 2 V 1 H 1 Maximum V 1 Minimum H 2 H 1 + H 2 Maximum 6 in. 152 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 36

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 36 Rear V ent - V ertical T ermination One Elbow Figure 7.16 T wo Elbows Figure 7.17 V 1 H 1 IN ST AL LED HO RI ZO NT AL L Y H 1 H 2 V 1 USE DVP SERIES COMPONENTS ONL Y USE DVP SERIES COMPONENTS ONL Y V 1 Minimum H 1 Maximum 1 ft. 305 mm 3 ft. 914 mm 2 ft. 610 mm 6 ft. 1.8 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 37

    37 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Rear V ent - V ertical T ermination - (continued) Three Elbows Figure 7.17 Three Elbows Figure 7.18 INST ALLED HORIZONT ALL Y H 3 H 1 H 2 V 1 V 2 V 1 H 2 H 1 USE DVP SERIES COMPONENTS ONL Y USE DVP SERIES COMPONENTS ONL Y H 1 H 2 H 3 V 1 Minimum H 1 + H 2 + H 3 Maximum ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 38

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 38 A. Pipe Clearances to Combustibles W ARNING! Risk of Fire! Maintain air space clearance to vent. DONOT pack insulation or other combustibles: • Between ceiling restops • Between wall shield restops • Around vent system Failure to keep insulati ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 39

    39 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 C. Install the Ceiling Firestop A ceiling restop MUST be used between oors and attics. • DVP pipe only - Frame an opening 10 in. x 10 in. (254 mm by 254 mm) whenever the vent penetrates a ceiling/oor (see Figure 8.3). • SLP pipe only - Frame opening 9 in. x ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 40

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 40 D. Install Attic Insulation Shield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc. requires the use of an attic shield. An att ic shi eld const ruc ted of 26 gauge minim um metal that ext en ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 41

    41 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. A. ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 42

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 42 B. Rear V ent NOTICE: Once appliance is set up for top or rear venting, it CANNOT be changed at a later time. N OT ICE : Onc e the sea l cap has be en remo ved it CAN NO T be reattached. Figure 9.8 Fold the tabs toward the center of the re plug (90º) and remov ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 43

    43 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 9.16 Proper Positioning and Securing of an Appliance NAILING TABS (BOTH SIDES) PILOT HOLES Figure 9.14 Non-combustible Board C. Installing the Non-combustible Board The fac tor y suppl ied non -co mbu sti ble boa rd must be used. See Fi gur e 9 .14. Figure 9.13 A ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 44

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 44 Figure 9.17 Fixed Glass Assembly GLASS ASSEMBL Y LA TCHES (BOTH BOTTOM AND TOP) E. Covers Removal For Servicing Control Compartment Access Door • Lift the lower door up and out to access the gas controls. T rim Door and Glass Door • Li ft th e fr ont trim doo r up a ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 45

    45 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 1 0 Installing V ent Pipe ( D V P and SL P P ipe ) A. Assemble V ent Sections (DVP Pipe Only) Attach V ent to the Firebox Assembly Not e: T he end of the pi pe sec tio ns with the la nced tabs w ill fac e toward th e applia nce. Attach the rst pipe section to the sta ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 46

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 46 B. Assemble V ent Sections (SLP Pipe Only) T o attach the rst vent component to the starting collars of the appliance: • Lock the vent components into place by sliding the pipe section onto the collar . • Align the seam of the pipe and seam of collar to allow eng ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 47

    47 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 120º Figure 10.8 Securing V ertical Pipe Sections 120º Figure 10.9 Securing Horizontal Pipe Sections E. Di sa ss emb le V e nt S ect io ns • Rotate either section (see Figure 10.10) so the seams on both pipe sections are aligned as shown in Figure 10.1 1. • Pull c ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 48

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 48 10 in. (254 mm) 12 in. (305 mm) INTERIOR WALL SHIELD G. Install Firestops For Horizontal Runs - Firestops are REQUIRED on both sides of a combustible wall through which the ue passes. T o insta ll r est ops (heat shie ld) for ho riz onta l run s tha t pas s throug ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 49

    49 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 10.15 Ceiling Firestop (Ceiling Side) Figure 10.16 Attic Firestop CEILING CEILING FIRESTOP RAFTER NAILS (4 REQUIRED) JOIST CEILING FIRESTOP CEILING NAILS (4 REQUIRED) If the area abov e the ceiling IS an attic, positi on and secure the restop on top of the pre ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 50

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 50 J. Install Metal Roof Flashing • See minimum vent heights for various pitched roofs (Figure 10.19) to determine the length of pipe to extend through the roof. • Slide the roof ashing over the pipe sections extending through the roof as shown in Figure 10.20. Figu ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 51

    51 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 CAULK K. Assemble and Install Storm Collar CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp. • Connect both halves of the storm collar with two screw ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 52

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 52 1 1 Gas Informat ion A. Gas Pressure Requirements W ARNING! Risk of Explosion! An in-line regulator MUST be installed if the gas pressure exceeds 3.7 kPa. Failure to install a regulator could damage valve. Pressure requirements for 350TRSI-AUF and 350TRSILP- ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 53

    53 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Figure 1 1.1 The gas is introduced to the appliance on the left hand side. See Figure 1 1.1. After the gas pipe installation is complete, check carefully all ga s conn ect ions for lea ks wit h a comm erci all y-av aila ble , noncorrosive leak check solution. Be sure to ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 54

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 54 1 2 Elec tr ical Information Figure 12.1 IPI Wiring Diagram /RC300AU C. Optional Accessories Requirements • This appliance may be used with a wall switch, wall mounted thermostat and/or a remote control. Wiring for optional Hearth & Home T echnologies approved acc ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 55

    55 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 BLUE BROWN GREEN/ YELLOW Figure 12.2 D. Blower These heaters have a factory installed fan and electrical junction cord. These components are located behind the lower door . Use of th e fan re qui res th at the Junc tio n cord (fac tor y in- sta lle d) be conn ect ed to ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 56

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 56 Hearth & Home T echnologies disclaims any responsibility for , and the warranty will be voided by , the following actions: • Installation and use of any damaged system component. • Modication of the system component. • Installation other than as instructed ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 57

    57 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 5. Close the housing door . See Figure 12.7. 4. Pla ce rem ote co ntr ol in sid e h ous ing . S ee Fi gur e 1 2.6 . Figure 12.6 Remote in Housing Installation of Remote Control Housing CAUTION! Risk of Fire! DO NOT install damaged or modied components ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 58

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 58 Figure 12.7 Mounting Remote Control Housing AUX300CE Module Installation • In ser t t he 4 h ol e h ar nes s f ro m t he AUX 30 0CE mod ul e i nt o the 4 pin pl ug on th e c ont rol mo du le. S ee Fig ure 12 .8. Fan Installation • Insert the 3 prong plug from the fa ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 59

    59 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 FIREPLACE ST A TUS THERMOST A T THERMOST A T DESIRED TEMP SETTING FLAME HEIGHT F AN SPEED ADJUST ABLE AUXILIARY ADJUST ABLE OUTPUT (ON/OFF) TIMER DISPLA Y/FUNCTION ROOM TEMP DISPLA Y FUNCTION LEVEL INDICA TOR LOW BA TTERY INDICA TOR TRANSMISSION INDICA TOR CHILD LOCK IN ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 60

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 60 About ON Mode • All functions can be accessed when the remote control is in the ON mode. • Only active functions will be displayed when the remote control is in the ON mode. For example: if the fan is the only function that’ s active, the fan icon and ame will ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 61

    61 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Adjusting Thermostat • Press the MENU button to activate the menu. • Using the UP and DOWN arrows highlight the THERMO icon and press SELECT . • Use the UP and DOWN arrows to turn the THERMO ON or OFF , then press SELECT (the SET TEMP will start blinking). Using t ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 62

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 62 Frequently Asked Questions/T roubleshooting Symptom Possible Cause Corrective Action Remote control will not transmit Batteries V erify batteries are functional and installed correctly . Remote control is in Child Lock mode Disengage Child Lock mode. Buttons not being p ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 63

    63 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 1 3 Finis hing A. Mantel and W all Projections W AR NI NG!  R isk  o f Fir e! C om ply w ith a ll m in imu m cl ea r - an ces as sp ec ie d. Fra min g clo ser th an th e min imu ms li st - ed mu st be co nst ruc ted en ti rel y of no nco mbu sti ble ma te ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 64

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 64 A. Remove Fixed Glass Assembly See Section 9.E. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the rebox. C. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the rebox or underneath in the control ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 65

    65 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 E. Log Placement Instructions Log Assembly: LOGS-350CE-D 1 2 3 4 5 6 Carefully remove the logs from the packaging. CAUTION: Logs are fragile! LOG #1 (SRV327-701): Place log #1 at the rear of the unit, with the left edge behind the tab on the pilot bracket. The right sid ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 66

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 66 LOG #3 (SRV705-703): Rest log #3 against the right front grate corner and place its slot over the right burner tab. LOG #4 (SR V530-716): Place the left end of log #4 in the groove on log #2 and the right end on log #1 as shown. 3 4 3 4 5 5 1 1 2 2 1 1 LOG #5 (SR V438-7 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 67

    67 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 6 6 LOG #6 (SR V540-704): Place log #6 against the second and third grate tines. If sooting occurs, the logs might need to be repositioned slightly to avoid excessive ame impingement. ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 68

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 68 1 5 T roublesho oting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist a qualied service technician in the diagnosis of a problem ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 69

    69 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 T roubleshooting (continued) Symptom Possible Cause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite. (If the pilot continues to spark after the pilot ame has been lit, ame rectication has not occurred.) A. A shorted o ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 70

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 70 1 6 Reference Materials A. Appliance Dimension Diagram Di men si on s a re a ct ua l a pp li anc e di men si on s. Us e for r ef ere nc e onl y . F or fr am in g d im en sio ns a nd cl ea ran ce s ref er t o S ec ti on 5. Figure 16.1 Appliance Dimensions Location Inches ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 71

    71 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 B. Maintenance T asks Inspect Maintenance T asks Doors 1. Inspect for scratches, dents or other damage and repair as necessary . 2. V erify no obstructions to airow . 3. V erify maintenance of proper clearance to combustible household objects. Gasket Seal, Glass Asse ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 72

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 72 C. V ent Components Diagrams Figure 16.3 DVP vent components Pipe Effective Length Inches Millimeters DVP4 4 102 DVP6 6 152 DVP12 12 305 DVP24 24 610 DVP36 36 914 DVP48 48 1219 DVP6A 3 to 6 76 to 152 DVP12A 3 to 12 76 to 305 DVP12MI 3 to 12 76 to 305 DVP24MI 3 to 24 76 ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 73

    73 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 C. V ent Components Diagrams ( continued ) Figure 16.4 DVP vent components DVP-TRAP2 DVP-TRAP2 Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in. (305 mm) 8 in. (203 mm) Max Effective Length Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 74

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 74 DVP-TRAPFL Flashing DVP-HRC-SS DVP-HRC-ZC-SS Horizontal T ermination Cap Fire Risk. • When using DVP-HRC-SS and DVP-HRC-ZC- SS termination caps on top vented fireplaces, a 6 inch (152 mm) minimum vert ical vent section is require d before installing first elbo w . W ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 75

    75 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 B. V ent Components Diagrams (continued) Figure 16.6 SLP Series V ent Components 8-3/4 in. 222 mm 6-1/2 in. 165 mm 6-5/8 in. 168 mm SLP45 45° Elbow Effective Height/ Length SLP-PIPE SLP-HVS Horizontal Pipe Support SLP-FS Ceiling Firestop SLP-WS W all Shield Firestop Ef ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 76

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 76 SLP-TVHW V ertical T ermination Cap SLP90 SL-2DVP DVP-FBHT DVP-FBHT SLP-TRAP2 Horizontal T ermination Cap 15-1/8 in. (384 mm) Note: Heat shields MUST overlap by a minimum of 1-1/2 in. (38 mm). The heat shield is designed to be used on a wall 4 in. to 7-1/4 in. (102 mm t ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 77

    77 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 D. Service Parts Beginning M anufacturing Date: July 2010 Ending M anufacturing Date: ______ 350TRSI-AUF , 350TRSILP-AUF Log Set Assembly IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model numbe ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 78

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 78 Service Parts Beginning M anufacturing Date: July 2010 Ending M anufacturing Date: ______ 350TRSI-AUF , 350TRSILP-AUF #17 V alve Assembly IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model numbe ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 79

    79 Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 Service Parts List 350TRSI-AUF , 350TRSILP-AUF IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number . All parts listed in this manual may be ordered from an authorized dea ...

  • Heat & Glo LifeStyle 350TRSILP-AUF - page 80

    Heat & Glo • 350TRSI-AUF , 350TRSILP-AUF • 2089-980 Rev . o • 6/12 80 E. Contact Information Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo dealer , please visit www .heatnglo.com. - NOTES - __________________________________________________________________________ ...

Manufacturer Heat & Glo LifeStyle Category Gas Heater

Documents that we receive from a manufacturer of a Heat & Glo LifeStyle 350TRSILP-AUF can be divided into several groups. They are, among others:
- Heat & Glo LifeStyle technical drawings
- 350TRSILP-AUF manuals
- Heat & Glo LifeStyle product data sheets
- information booklets
- or energy labels Heat & Glo LifeStyle 350TRSILP-AUF
All of them are important, but the most important information from the point of view of use of the device are in the user manual Heat & Glo LifeStyle 350TRSILP-AUF.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Heat & Glo LifeStyle 350TRSILP-AUF, service manual, brief instructions and user manuals Heat & Glo LifeStyle 350TRSILP-AUF. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Heat & Glo LifeStyle 350TRSILP-AUF.

Similar manuals

A complete manual for the device Heat & Glo LifeStyle 350TRSILP-AUF, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Heat & Glo LifeStyle 350TRSILP-AUF by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Heat & Glo LifeStyle 350TRSILP-AUF.

A complete Heat & Glo LifeStyle manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Heat & Glo LifeStyle 350TRSILP-AUF - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Heat & Glo LifeStyle 350TRSILP-AUF, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Heat & Glo LifeStyle 350TRSILP-AUF, that we can find in the current document
3. Tips how to use the basic functions of the device Heat & Glo LifeStyle 350TRSILP-AUF - which should help us in our first steps of using Heat & Glo LifeStyle 350TRSILP-AUF
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Heat & Glo LifeStyle 350TRSILP-AUF
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Heat & Glo LifeStyle 350TRSILP-AUF in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Heat & Glo LifeStyle 350TRSILP-AUF?

Use the form below

If you did not solve your problem by using a manual Heat & Glo LifeStyle 350TRSILP-AUF, ask a question using the form below. If a user had a similar problem with Heat & Glo LifeStyle 350TRSILP-AUF it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)