Manual Supermicro AOC-CTG-i1S

19 pages Not applicable
Download

Go to site of 19

Summary
  • Supermicro AOC-CTG-i1S - page 1

    User's Guide Revision 1.0 AOC-CTG-i1S ...

  • Supermicro AOC-CTG-i1S - page 2

    User's Guide Revision 1.0 Release Date: July 1 1, 2012 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their ...

  • Supermicro AOC-CTG-i1S - page 3

    Preface About this User's Guide This user's guide is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the AOC-CTG-i1S add-on card. About this Add-on Card The AOC-CTG-i1S 10 Gigabit Ethernet Adapter is a exible and scalable Ethernet adapter designed for to ...

  • Supermicro AOC-CTG-i1S - page 4

    iv AOC-CTG-i1S Add-on Card User's Guide Conventions Used in the User's Guide Pay special attention to the following symbols for proper system installation and to prevent damage to the system or injury to yourself: W arning: Important information given to ensure proper system installation or to prevent damage to the components or injury to ...

  • Supermicro AOC-CTG-i1S - page 5

    v Preface Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (T echnical Support) Website: www .supermicro.com Europe Address: Super Micro Computer B.V . Het Sterren ...

  • Supermicro AOC-CTG-i1S - page 6

    T able of Contents Preface Chapter 1 Overview 1-1 Overview ......................................................................................................... 1-1 1-2 Key Features ................................................................................................... 1-1 1-3 Specications ........................................ ...

  • Supermicro AOC-CTG-i1S - page 7

    Chapter 1: Overview 1-1 Chapter 1 Overview 1-1 Overview Congratulations on purchasing your add-on card from an acknowledged leader in the industry . Supermicro products are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. For product support and updates, please refer to our website a ...

  • Supermicro AOC-CTG-i1S - page 8

    1-2 AOC-CTG-i1S Add-on Card User's Guide • PCI-E 2.0 x8 (5GT/s) interface • Load balancing on multiple CPUs • iSCSI remote boot support • Fibre Channel over Ethernet (FCoE) support • Intel ® PROSet Utility for Windows ® Device Manager I/O Features • Intel QuickData T echnology: DMA engine that enhances data acce ...

  • Supermicro AOC-CTG-i1S - page 9

    Chapter 1: Overview 1-3 • Network Monitoring (RMON) statistics counters • iSCSI remote boot OS Support • Windows ® 7, 2003, 2008, 2008 R2, Vista • RedHat EL, SuSe SLES • FreeBSD 8.0 • VMware Cables Support • SFP+ direct attached twin axial cables, up to 10 meters • Dual LC ber-optic SR cables, up to 300 m ...

  • Supermicro AOC-CTG-i1S - page 10

    1-4 AOC-CTG-i1S Add-on Card User's Guide Notes: (1) = 1U Bracket. (2) = 2U Bracket. This product is only available as an integrated solution with Supermicro server systems. For the most current product information, visit: www . supermicro.com. Compliance/Environmental • RoHS Compliant 6/6, Pb Free Supported Platforms • Supermicro T w ...

  • Supermicro AOC-CTG-i1S - page 11

    Chapter 2: Hardware Components 2-1 Chapter 2 Hardware Components 2-1 Add-On Card Image and Layout The AOC-CTG-i1S Image The AOC-CTG-i1S Layout 1 2-2 Major Components The following major components are installed on the AOC-CTG-i1S: 1. Intel 82599EN 10GbE Controller 2. SFP+ Port 3. Dual USB 2.0 Ports Intel 82599EN 10GbE Controller 1 2 3 2 3 ...

  • Supermicro AOC-CTG-i1S - page 12

    2-2 AOC-CTG-i1S Add-on Card User's Guide 2-3 Connectors and PCB LEDs SFP+ Port A single SFP+ 10GbE adapter port is located on the add-on card. Connect a DAC T win Axial cable or an LC Fiber- Optic SR cable to the port to provide Gigabit Ethernet communication. Refer to the add-on card layout on Page 2-1 for the location of the SFP+ port. USB P ...

  • Supermicro AOC-CTG-i1S - page 13

    3-1 Chapter 3: Installation Chapter 3 Installation 3-1 Static-Sensitive Devices Electrostatic Discharge (ESD) can damage electronic com ponents. T o avoid dam - aging your add-on card, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD. Precautions • Use a grounded ...

  • Supermicro AOC-CTG-i1S - page 14

    3-2 AOC-CTG-i1S Add-on Card User's Guide 3-2 Add-On Card Brackets The add-on card ships with a PCB bracket that is pre-installed at the factory . For 1U systems, an I/O bracket is also pre-installed on the card. For 2U systems, the IO bracket is bundled with the card and must be installed by the customer . See the drawings below for bracket d ...

  • Supermicro AOC-CTG-i1S - page 15

    3-3 Chapter 3: Installation 3-4 Installing the Add-on Card Follow the steps below to install the add-on card into your system. 1. Remove the server cover and, if necessary , set aside any screws for later use. 2. Remove the add-on card slot cover . If the case requires a screw , place the screw aside for later use. 3. Position the add-on card in th ...

  • Supermicro AOC-CTG-i1S - page 16

    3-4 AOC-CTG-i1S Add-on Card User's Guide 3. Click on INST ALL DRIVERS AND SOFTWARE. 4. Follow the prompts to complete the installation. 3-6 Installing the Linux Operating System Follow the steps below to install the driver to a Linux system. Build a Binary RPM Package 1. Run ‘rpmbuild -tb <lename.tar.gz>’ 2. Replace <lename. ...

  • Supermicro AOC-CTG-i1S - page 17

    3-5 Chapter 3: Installation 4. Compile the driver module: make install The binary will be installed as: /lib/modules/[KERNEL_VERSION]/kernel/drivers/net/ixgbe/ixgbe.[k]o The install locations listed above are the default locations. They might not be correct for certain Linux distributions. For more information, see the ldistrib.txt le included i ...

  • Supermicro AOC-CTG-i1S - page 18

    3-6 AOC-CTG-i1S Add-on Card User's Guide Notes ...

  • Supermicro AOC-CTG-i1S - page 19

    (Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signicant injury or ...

Manufacturer Supermicro Category Network card

Documents that we receive from a manufacturer of a Supermicro AOC-CTG-i1S can be divided into several groups. They are, among others:
- Supermicro technical drawings
- AOC-CTG-i1S manuals
- Supermicro product data sheets
- information booklets
- or energy labels Supermicro AOC-CTG-i1S
All of them are important, but the most important information from the point of view of use of the device are in the user manual Supermicro AOC-CTG-i1S.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Supermicro AOC-CTG-i1S, service manual, brief instructions and user manuals Supermicro AOC-CTG-i1S. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Supermicro AOC-CTG-i1S.

A complete manual for the device Supermicro AOC-CTG-i1S, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Supermicro AOC-CTG-i1S by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Supermicro AOC-CTG-i1S.

A complete Supermicro manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Supermicro AOC-CTG-i1S - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Supermicro AOC-CTG-i1S, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Supermicro AOC-CTG-i1S, that we can find in the current document
3. Tips how to use the basic functions of the device Supermicro AOC-CTG-i1S - which should help us in our first steps of using Supermicro AOC-CTG-i1S
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Supermicro AOC-CTG-i1S
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Supermicro AOC-CTG-i1S in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Supermicro AOC-CTG-i1S?

Use the form below

If you did not solve your problem by using a manual Supermicro AOC-CTG-i1S, ask a question using the form below. If a user had a similar problem with Supermicro AOC-CTG-i1S it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)