English dropdown-ico

Manual NETGEAR WGR614 v8

132 pages 2.77 mb
Download

Go to site of 132

Summary
  • NETGEAR WGR614 v8 - page 1

    202-10226-02 May 2008 NETGEAR , Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA NETGEAR 54 Mbp s Wireless Router WGR614v8 User Manual ...

  • NETGEAR WGR614 v8 - page 2

    ii v1.1, May 2008 © 2008 by NETGEAR, Inc. All rights reserved. T echnical Support Please refer to the support informat ion card that shipped with your prod uct. When you register your product at http://www .netgear .com/r egister , we can provide you with faster expert te chnical support and timel y notices of product and software upgrades. NETGEA ...

  • NETGEAR WGR614 v8 - page 3

    v1.1, May 2008 iii This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not caus e harmful interference, and 2. This device must accept any inte rference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly ...

  • NETGEAR WGR614 v8 - page 4

    v1.1, May 20 08 iv Bestätigung des Herstellers/Importeurs Es wird hiermit bestätigt, daß da s W ireless-G Router Model WGR614v8 ge mäß der im BMP T -AmtsblVfg 243/1991 und Vfg 46/1992 aufgeführten Bestimmungen en ts tört ist. Das vorschrifts mäßige Betreiben einiger Geräte (z.B. T estsender) kann jedoch gewissen Beschr änkungen unterlieg ...

  • NETGEAR WGR614 v8 - page 5

    v1.1, May 2008 v Certificate of the Manufacturer/Importer It is hereby certified that the Wire less- G Router Model WG R614v8 has been suppressed in accordance with the conditions set out in the BMP T -Amtsb lVfg 243/1991 and Vfg 46/1992. The operati on of some equipment (for example, test transmitte rs) in a cc o rdanc e wit h the regulations may ...

  • NETGEAR WGR614 v8 - page 6

    v1.1, May 20 08 vi ...

  • NETGEAR WGR614 v8 - page 7

    vii v1.1, May 2008 Content s About This Manual Conventions, Formats, and Scope ........................... ............. ................. ................ .......... xi How to Use This Manual ................. ................ ................ ............. ................ ................ ....xii How to Print This Manual ........................ ...

  • NETGEAR WGR614 v8 - page 8

    54 Mbps Wir eless Router WG R614v8 User Manual viii Contents v1.1, May 2008 Understanding Y our Firewall .. .......... ............. ............ ................. ............. ................ ...... 2-21 Chapter 3 Restricting Access From Y our Network Content Filtering Overview .... ............. ................ ................ ............. . ...

  • NETGEAR WGR614 v8 - page 9

    54 Mbps Wireless Router WGR614v8 User Manual Contents ix v1.1, May 2008 How Y our Computer Access es a Remote Computer through Y our Router .............. 5-2 How Port T riggering Changes the Communicat ion Process ..... ................ ............... 5-3 How Port Forwarding Changes the Communication Process ................ ................ .. 5 ...

  • NETGEAR WGR614 v8 - page 10

    54 Mbps Wir eless Router WG R614v8 User Manual x Contents v1.1, May 2008 T esting the Path from Y our Computer to a Remote Device ......... ................ ............ 7-8 Problems with Date and T ime ...... ................. ................ ............. ................ ................ ..... 7-8 Solving Wireless Connection Problems . ........ ...

  • NETGEAR WGR614 v8 - page 11

    xi v1.1, May 2008 About This Manual The user manual provides information for configuring the features of the NETGEAR ® W ireless-G Router Model WGR614v8 beyond initial configuration settings. Initi al configuration instructions can be found in the Setup Manual on the Resour ce CD . Y ou should have basic to intermediate computer and Internet skill ...

  • NETGEAR WGR614 v8 - page 12

    54 Mbps Wir eless Router WG R614v8 User Manual xii About This Manual v1.1, May 2008 • Scope . This manual is written for the W ireless-G Ro uter according to th ese specifications: For more information abou t network, Internet, firewall, and VP N technologies, c lick the links to the NETGEAR website in Appendix B, “Rela ted Documents .” How t ...

  • NETGEAR WGR614 v8 - page 13

    54 Mbps Wireless Router WGR614v8 User Manual About This Manual xiii v1.1, May 2008 • Printing from PDF . Y our computer must have the free Adobe Acrobat Reader installed for you to view and print PDF files. The Acrobat Reader is available on the Adobe website at http://www .a dobe.com . – Printing a PDF chapter . Use the PDF of This Chapter lin ...

  • NETGEAR WGR614 v8 - page 14

    54 Mbps Wir eless Router WG R614v8 User Manual xiv About This Manual v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 15

    1-1 v1.1, May 2008 Chapter 1 Configuring Internet Connectivity This chapter describes the settings for your Internet connection and your wireless local area network (LAN) connection. When you perform the initial configuration of your wireless rout er using the Resour ce CD as described in the Installation Assistant Smartwizard , these settings are ...

  • NETGEAR WGR614 v8 - page 16

    54 Mbps Wir eless Router WG R614v8 User Manual 1-2 Configuring Internet Connectivity v1.1, May 2008 Using the Setup Manual For first-time installation of your wireless router, refer to the Setup M anual on the Resour ce CD . It explains how to launch the NETGEAR Smart W izard, which will step you through the procedure to connect your router , modem ...

  • NETGEAR WGR614 v8 - page 17

    54 Mbps Wireless Router WGR614v8 User Manual Configuring In ternet Connectivity 1-3 v1.1, May 2008 2. Enter admin for the router user name and your password (or the default, password ). For information about how to change the password, see “Changing the Administrator Password” on page 2-20 . The Checking for Firmware Updates screen a ppears unl ...

  • NETGEAR WGR614 v8 - page 18

    54 Mbps Wir eless Router WG R614v8 User Manual 1-4 Configuring Internet Connectivity v1.1, May 2008 If the wireless router is connected to the Internet, you can select Knowledge Base or Documentation under W eb Support in the main menu to view support information or the documentation for the wireless router. If you do not click Logout , the wireles ...

  • NETGEAR WGR614 v8 - page 19

    54 Mbps Wireless Router WGR614v8 User Manual Configuring In ternet Connectivity 1-5 v1.1, May 2008 V iewing and Configurin g Basic ISP Settings Settings related to your Internet service are specified in the Basi c Settings screen. T o access the Basic Settings screen, from the main menu of the router ’ s W eb Configuration Interface, un de r Setu ...

  • NETGEAR WGR614 v8 - page 20

    54 Mbps Wir eless Router WG R614v8 User Manual 1-6 Configuring Internet Connectivity v1.1, May 2008 – Account Name (might also be called Host Name). The account name is provided to the ISP during a DHCP request from your router . In most cases, this setting is not required, but some ISPs require it for access to ISP services such as mail or news ...

  • NETGEAR WGR614 v8 - page 21

    54 Mbps Wireless Router WGR614v8 User Manual Configuring In ternet Connectivity 1-7 v1.1, May 2008 If a login is required by your ISP , the following settings appear in the Basic Settings screen: • Does Y our Internet Connection Require A Login? If y ou usually must use a login program such as W inPOET to access the Internet, your Internet connec ...

  • NETGEAR WGR614 v8 - page 22

    54 Mbps Wir eless Router WG R614v8 User Manual 1-8 Configuring Internet Connectivity v1.1, May 2008 • T elstra Bigpond , an Australian residen tial cable modem se rvice • Other , which selects PPPoE (Point to Point Pro tocol over Ethernet), the p rotocol used by most DSL services worldwide. – Login and Password . This is the user name and pas ...

  • NETGEAR WGR614 v8 - page 23

    54 Mbps Wireless Router WGR614v8 User Manual Configuring In ternet Connectivity 1-9 v1.1, May 2008 – Domain Name Server (DNS) Address . If you know that your ISP does not automatically transmit DNS addresses to the router during login, select Use These DNS Servers , a nd enter the IP address of your ISP’ s primary D NS server . If a secondary D ...

  • NETGEAR WGR614 v8 - page 24

    54 Mbps Wir eless Router WG R614v8 User Manual 1-10 Configuring Inte rnet Connectivit y v1.1, May 2008 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric characters. The default SSID is NETGEAR. 3. Select the region in which t ...

  • NETGEAR WGR614 v8 - page 25

    54 Mbps Wireless Router WGR614v8 User Manual Configuring In ternet Connec tivity 1-11 v1.1, May 2008 8. Select Wir el e s s Settings under Advanced in the main menu of the WGR614v8 router . 9. Make sure that the Enable Wireless Router Radio and Enable SSID Br oadcast check boxes are selected. 10. Click Setup Access List . 11 . Make sure that the T ...

  • NETGEAR WGR614 v8 - page 26

    54 Mbps Wir eless Router WG R614v8 User Manual 1-12 Configuring Inte rnet Connectivit y v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 27

    2-1 v1.1, May 2008 Chapter 2 Safeguarding Y our Network The W ireless-G Router Model WGR6 14 v8 provid es highly effective security features, which are covered in detail in this chapter . This chapter includes the following sections: • “Choosing Appropriat e Wireless S ecurity” on page 2-1 ” • “Recording Basic W ireless Settings Setup I ...

  • NETGEAR WGR614 v8 - page 28

    54 Mbps Wir eless Router WG R614v8 User Manual 2-2 Safeguarding Your Network v1.1, May 2008 WEP connections can take slightly longer to establish. Also, WEP , WP A-PSK, and WP A2-PSK encryption can consume more battery power on a notebook computer , and can cause significant performance degra dation with a slow computer . T o configure the wireless ...

  • NETGEAR WGR614 v8 - page 29

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2- 3 v1.1, May 2008 Basic security options are listed below in order of increasing effectiveness. Other features that affect security are listed in the table that follows this one. For more de tails on wireless security methods, see the online document “W ireless Netw orking B ...

  • NETGEAR WGR614 v8 - page 30

    54 Mbps Wir eless Router WG R614v8 User Manual 2-4 Safeguarding Your Network v1.1, May 2008 T able 2-2. Other Features Th at Enhance Security Security T ype Description Disable the wireles s router radio. If you disable the wireless router ra dio, wireless devices cannot commu nicate with the router at all. Y ou might disable this when you are away ...

  • NETGEAR WGR614 v8 - page 31

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2- 5 v1.1, May 2008 Recording Basic Wireless Settings Setup Information Before customizing your wireless settings, print this section, and re cord the following information. If you are working with an existing wireless network, the person who set up or is responsible for the net ...

  • NETGEAR WGR614 v8 - page 32

    54 Mbps Wir eless Router WG R614v8 User Manual 2-6 Safeguarding Your Network v1.1, May 2008 – Passphrase . _________ _____________________ Th ese characters ar e case-sensitive. Enter a word or group of printable ch aracters. When y ou use WP A-PSK, the other devices in the network will not connect unless they are also set to WP A-PSK and are con ...

  • NETGEAR WGR614 v8 - page 33

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2- 7 v1.1, May 2008 • Name (SSID) . The SSID is also known as the wireless network name. Enter a value of up to 32 alphanumeric characters. When more than on e wireless network is active, different wireless network names provide a way to separate the traffi c. For a wireless d ...

  • NETGEAR WGR614 v8 - page 34

    54 Mbps Wir eless Router WG R614v8 User Manual 2-8 Safeguarding Your Network v1.1, May 2008 WEP of fers the following options: • Open System . W ith Open System authen tication and 64 or 128 bit WEP data encryption, the W ireless-G Router does perform data encryption but does not perform any authentication. Anyone can join the network. This setti ...

  • NETGEAR WGR614 v8 - page 35

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2- 9 v1.1, May 2008 • Automatic . In the Passphrase field, enter a word or g rou p of printable chara cters, an d click Generate . The passphrase is case- sensitive. For example, NETGEAR is not the same as nETgear . The four key fields are automatically populated with key valu ...

  • NETGEAR WGR614 v8 - page 36

    54 Mbps Wir eless Router WG R614v8 User Manual 2-10 Safeguard ing Your Netw ork v1.1, May 2008 3. In the Passphrase field, enter a word or group of 8–63 printable characters. The passphrase is case-sensitive. 4. Click Apply to save your settings. V iewing Advanced Wireless Settings This section describes the wireless settings that you can view an ...

  • NETGEAR WGR614 v8 - page 37

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-11 v1.1, May 2008 The available settings in this screen are: • Enable Wir eless Router Radio . If you disable the wire less router radio, wireless de vices cannot connect to the W ireless-G Router. If you will not be using your wireless network for a period of time, you can ...

  • NETGEAR WGR614 v8 - page 38

    54 Mbps Wir eless Router WG R614v8 User Manual 2-12 Safeguard ing Your Netw ork v1.1, May 2008 • Keep Existing Wir eless Settings. This shows whether the router is in the WPS Configured state. If this option is not checked, adding a new wireless client will change the router's wireless settings to an au tomatically generated random SSID and ...

  • NETGEAR WGR614 v8 - page 39

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-13 v1.1, May 2008 Push Button Configuration The W ireless-G Router Model WGR614v8 supp orts using the software button WPS method. Using the Sof tware Button in the Add WPS Client Screen 1. Log in to the router as described in “Logging In to Y our W ireless Router” on page ...

  • NETGEAR WGR614 v8 - page 40

    54 Mbps Wir eless Router WG R614v8 User Manual 2-14 Safeguard ing Your Netw ork v1.1, May 2008 The W ireless-G Router’ s green button light ceases blinking and remains on when one of these conditions occurs: • The router and the client establis h a wireless connectio n. • The 2-minute window period expires for establishing a WPS connection. I ...

  • NETGEAR WGR614 v8 - page 41

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-15 v1.1, May 2008 6. Click Next . The following screen displays, and the Smart W izard initiates the wireless connection: 7. Finally , use the WPS feature of the wireless clie nt to establish a connection with the router . Refer to the wireless client documentation for instruc ...

  • NETGEAR WGR614 v8 - page 42

    54 Mbps Wir eless Router WG R614v8 User Manual 2-16 Safeguard ing Your Netw ork v1.1, May 2008 These options are availa ble under WPS Settings: • Router’s PIN . The PIN is displayed so that you can use it to c onfigure the router through WPS (W i-Fi Protected Setup). It is also displayed on the rout er ’ s label. • Disable Router’ s PIN . ...

  • NETGEAR WGR614 v8 - page 43

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-17 v1.1, May 2008 Adding Additional Non- WPS-Enabled Clients If you are connecting a combination of WPS-enabled clients and clie nts that are not WPS enabled, you cannot use the WPS setup procedures to add clients that are not WPS enabled. Y ou need to record and then manually ...

  • NETGEAR WGR614 v8 - page 44

    54 Mbps Wir eless Router WG R614v8 User Manual 2-18 Safeguard ing Your Netw ork v1.1, May 2008 using the network configuration utilities of the co mputer . In W indowsXP , for example, typing the ipconfig/all command in an MSDOS comman d prompt window displays the MAC add ress as Physical Address. Y ou might also find the MAC ad dresses in the rout ...

  • NETGEAR WGR614 v8 - page 45

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-19 v1.1, May 2008 4. If the computer you want appears in the A vailabl e W ireless Cards list, you can select the radio button of that computer to capture its MAC addr ess; otherwise, you can manually enter a name and the MAC address of the authorized comput er . Y ou can usua ...

  • NETGEAR WGR614 v8 - page 46

    54 Mbps Wir eless Router WG R614v8 User Manual 2-20 Safeguard ing Your Netw ork v1.1, May 2008 Changing the Administrator Password The default password for the router ’ s W eb Configuration Manager is password . NETGEAR recommends that you ch ange this password to a more secure password. T o change the admi nistrator password: 1. On the main menu ...

  • NETGEAR WGR614 v8 - page 47

    54 Mbps Wireless Router WGR614v8 User Manual Safeguarding Your Network 2-21 v1.1, May 2008 Backing Up Y our Configuration The configuration settings of the W i reless-G Router are stored within the router in a configuration file. Y ou can back up (save) this file and retr ieve it later . NETGEAR r ecommends that you save your configuration file aft ...

  • NETGEAR WGR614 v8 - page 48

    54 Mbps Wir eless Router WG R614v8 User Manual 2-22 Safeguard ing Your Netw ork v1.1, May 2008 • Allow inbound access to your server . T o allow inbound access to resources on your local network (for example, a W eb server or remote desktop program), you can open the needed services by configuring port forwarding as described in “Changing the M ...

  • NETGEAR WGR614 v8 - page 49

    3-1 v1.1, May 2008 Chapter 3 Restricting Access From Y our Network This chapter describes how to u se the content filtering and reporting features of the W ireless-G Router Model WGR614v8 to protect yo ur network. Y ou ca n find these features by selecting the items under Content Filtering in the main menu of the browser interface. This chapter inc ...

  • NETGEAR WGR614 v8 - page 50

    54 Mbps Wir eless Router WG R614v8 User Manual 3-2 Restricting Access From Your Network v1.1, May 2008 T o block access to Internet sites: 1. Select Block Sites under Content Filtering in the main menu. The Block Site s screen displays. 2. Enable keyword blocking by selecting either Per Schedule or Always . T o block by schedule, be sure to specify ...

  • NETGEAR WGR614 v8 - page 51

    54 Mbps Wireless Router WGR614v8 User Manual Restricting Access Fr om Your Network 3-3 v1.1, May 2008 Blocking Access to Internet Services The W ireless-G Router allo ws you to block the us e of certa in Inte rnet services by computers on your network. This is called service blocking or po rt filtering. Services ar e functions performed by server c ...

  • NETGEAR WGR614 v8 - page 52

    54 Mbps Wir eless Router WG R614v8 User Manual 3-4 Restricting Access From Your Network v1.1, May 2008 3. Specify a service for b locking by clicking Add . The Block Services Setup screen displays. 4. From the Service T ype list, select the application or servi ce to b e allowed or blocked. Th e list already displays several common servic es, but y ...

  • NETGEAR WGR614 v8 - page 53

    54 Mbps Wireless Router WGR614v8 User Manual Restricting Access Fr om Your Network 3-5 v1.1, May 2008 Blocking Services by IP Address Range In the Filter Services For area, you can block the specified service for a single computer , a range of computers (having consecutive IP address es), or all computers on your netwo rk. Scheduling Blocking The W ...

  • NETGEAR WGR614 v8 - page 54

    54 Mbps Wir eless Router WG R614v8 User Manual 3-6 Restricting Access From Your Network v1.1, May 2008 V iewing Logs of Web Access or Attempted W eb Access The log is a detailed record of the websites you have accessed or attempted to access. Up to 128 entries are stored in the log. Log entries appear on ly when keyword blocking is enabled and no l ...

  • NETGEAR WGR614 v8 - page 55

    54 Mbps Wireless Router WGR614v8 User Manual Restricting Access Fr om Your Network 3-7 v1.1, May 2008 Configuring E-mail Alert and W eb Access Log Notifications T o receive logs and alerts by e-mail, you mu st provide your e-mai l account information. T o configure e-mail alert and web access log notifications: 1. Select E-mail under Content Filter ...

  • NETGEAR WGR614 v8 - page 56

    54 Mbps Wir eless Router WG R614v8 User Manual 3-8 Restricting Access From Your Network v1.1, May 2008 b. Enter your password for the e-mail server in the Passw ord field. 4. Y ou can specify that logs are automati cally sent by e-mail with these options: • Send alert immediately . Select this check box for immediate notification of attempted acc ...

  • NETGEAR WGR614 v8 - page 57

    4-1 v1.1, May 2008 Chapter 4 Customizing Y our Network Settings This chapter describes how to configure advanced networking features of the W ireless-G Router Model WGR614v8, including LAN, W AN, and routing settings. It contains the following sectio ns: • “Using the LAN IP Setup Options” on page 4-1 ” • “Using a Dynamic DNS Serv ice” ...

  • NETGEAR WGR614 v8 - page 58

    54 Mbps Wir eless Router WG R614v8 User Manual 4-2 Customizing Your Networ k Settings v1.1, May 2008 Configuring a Device Name The device name is a user-friendly name for the ro uter . This name is shown in the Network on W indows V ista and the Network Explorer on all Windows systems. The Device Name field cannot be blank. The default name is WNR3 ...

  • NETGEAR WGR614 v8 - page 59

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Ne twork Settings 4-3 v1.1, May 2008 Specify the pool of IP addresses to be assigned by setting the st arting IP address and ending IP address. These addresses should be part of the same IP addre ss subnet as the router ’ s LAN IP address. Using the default addressing scheme , you shou ...

  • NETGEAR WGR614 v8 - page 60

    54 Mbps Wir eless Router WG R614v8 User Manual 4-4 Customizing Your Networ k Settings v1.1, May 2008 4. Click Apply to enter the reserved address into the table. T o edit or delete a reserved address entry: 1. Click the button next to the reserved address you want to edit or delete. 2. Click Edit or Delete . Using a Dynamic DNS Service If your Inte ...

  • NETGEAR WGR614 v8 - page 61

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Ne twork Settings 4-5 v1.1, May 2008 From the main menu of the browser interface, under Advanced, select Dynamic DNS to display the Dynami c DN S sc re en . T o configure Dynamic DNS: 1. Register for an account with one of the Dy namic DNS service providers whose names appear in the Serv ...

  • NETGEAR WGR614 v8 - page 62

    54 Mbps Wir eless Router WG R614v8 User Manual 4-6 Customizing Your Networ k Settings v1.1, May 2008 Configuring the W AN Setup Options The W AN Setup options let you configure a DM Z (demilitarized zone) server , change the Maximum T ransmit Unit (MTU) size, and enable the wireless router to respond t o a ping on the W AN (Internet) port. From the ...

  • NETGEAR WGR614 v8 - page 63

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Ne twork Settings 4-7 v1.1, May 2008 them, but there are other applications that migh t not function well. In some cases, one local computer can run the application co rrectly if that computer ’ s IP ad dres s is entered as the default DMZ server . Incoming traffic from the Internet is ...

  • NETGEAR WGR614 v8 - page 64

    54 Mbps Wir eless Router WG R614v8 User Manual 4-8 Customizing Your Networ k Settings v1.1, May 2008 Configuring NA T Filtering Network Address T ranslation (NA T) determines ho w the router processes inbound traffic. Secured NA T provides a secured firewall to protect the computers on the LAN from attacks from the Internet, but might prevent some ...

  • NETGEAR WGR614 v8 - page 65

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Ne twork Settings 4-9 v1.1, May 2008 134.177.0.0 netwo rk, you r rou ter forwar ds your request to the ISP . The ISP forwards your request to the comp any where you are em ployed, and the requ est is likely to be denied by the company’ s firewall. In this case you must define a static ...

  • NETGEAR WGR614 v8 - page 66

    54 Mbps Wir eless Router WG R614v8 User Manual 4-10 Customizing Your Networ k Settings v1.1, May 2008 2. In the Route Name field, type a name for this static rout e. (This is for identification purposes only .) 3. Select the Private check box if you want to limit access to the LAN only . If Private is selected, the static route is not reported in R ...

  • NETGEAR WGR614 v8 - page 67

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Network Settings 4-11 v1.1, May 2008 In the scenario shown, the following co nditions must be met for both APs: • Both APs m ust use the same SSID, wireles s channel, and encryptio n mode (see information about WEP in “Configuring WEP W ireless Security” on page 2-7” ). • Both ...

  • NETGEAR WGR614 v8 - page 68

    54 Mbps Wir eless Router WG R614v8 User Manual 4-12 Customizing Your Networ k Settings v1.1, May 2008 If this check box is selected, th e router communicates wireless ly only with other APs whose MAC addresses are listed in this screen. The r outer still communicates with wire-conne cted LAN devices. Setting Up the Base S tation The wireless repeat ...

  • NETGEAR WGR614 v8 - page 69

    54 Mbps Wireless Router WGR614v8 User Manual Customizing Your Network Settings 4-13 v1.1, May 2008 Setting Up a Repeater Unit Use a wi red Ethernet connection t o set up the repe ater unit to avoid conflicts with the wireless connection to the base station. T o configure a W ireless-G Router as a repeater unit: 1. If you are using the same model of ...

  • NETGEAR WGR614 v8 - page 70

    54 Mbps Wir eless Router WG R614v8 User Manual 4-14 Customizing Your Networ k Settings v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 71

    5-1 v1.1, May 2008 Chapter 5 Fine-T uning Y our Network This chapter describes how to modify the configuration of the W ireless-G Router Model WGR614v8 to allow specific applications to access the Internet or to be accessed from the Internet, and how to make adju stments to enhance your network’ s performance. This chapter includes the following ...

  • NETGEAR WGR614 v8 - page 72

    54 Mbps Wir eless Router WG R614v8 User Manual 5-2 Fine-Tuni ng Your Netw ork v1.1, May 2008 How Y our Computer Accesses a Re mote Computer through Y our Router When a computer on your network needs to acce ss a computer on the Internet, your computer sends your router a message containing source an d destination address and process information. Be ...

  • NETGEAR WGR614 v8 - page 73

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Yo ur Network 5-3 v1.1, May 2008 4. The W eb se rve r at www .example.com compos es a return message with the requested W eb page data. The re turn message contains the following address a nd port information: • The source address is the IP address of www .example.com. • The source port n ...

  • NETGEAR WGR614 v8 - page 74

    54 Mbps Wir eless Router WG R614v8 User Manual 5-4 Fine-Tuni ng Your Netw ork v1.1, May 2008 “When you initiate a session with destination port 6667, you must also allo w incoming traffic on port 1 13 to reach the originatin g computer .” Using steps si milar to the preceding example, the following sequence shows the effects of the port trigger ...

  • NETGEAR WGR614 v8 - page 75

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Yo ur Network 5-5 v1.1, May 2008 How Port Forwarding Changes the Communication Process In both of the preceding examples, your computer initiates an application session with a serve r computer on the Internet. However , you might need to allow a client computer on the Internet to initiate a c ...

  • NETGEAR WGR614 v8 - page 76

    54 Mbps Wir eless Router WG R614v8 User Manual 5-6 Fine-Tuni ng Your Netw ork v1.1, May 2008 How Port Forwarding Diff ers from Port T riggering The following points summarize the differences between port forwarding and port triggering: • Port triggering can be used by any compu ter on your network, although only one computer can use it at a time. ...

  • NETGEAR WGR614 v8 - page 77

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Yo ur Network 5-7 v1.1, May 2008 T o configure port forwarding to a local server: 1. Select Port Forwarding/Port T riggering under Advanced in the main menu. 2. From the Service Name list, select the service or game that y ou will host on your network. If the service does not appear in th e l ...

  • NETGEAR WGR614 v8 - page 78

    54 Mbps Wir eless Router WG R614v8 User Manual 5-8 Fine-Tuni ng Your Netw ork v1.1, May 2008 2. Click Add Custom Service . 3. In the Service Name field, enter a descriptive name. 4. In the Service T ype field, select the protocol. If you are unsure, select TCP/UDP . 5. In the St a r t i n g P o r t field, enter the beginning po rt number . • If t ...

  • NETGEAR WGR614 v8 - page 79

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Yo ur Network 5-9 v1.1, May 2008 T o make a local W eb server public: 1. Assign your W eb server eithe r a fixed IP addr e ss or a dynamic IP address using DHCP address reservation, as explained in “Using Address Rese rvation” on page 4-3 . In this example, your router will always give yo ...

  • NETGEAR WGR614 v8 - page 80

    54 Mbps Wir eless Router WG R614v8 User Manual 5-10 Fine-Tun ing Your Netw ork v1.1, May 2008 T o configure port trigg ering, you need to know which inbou nd ports the application needs. Also, you need to know the number of the outbound po rt that will trigger the opening of the inbound ports. Y ou can usually determine this information by contacti ...

  • NETGEAR WGR614 v8 - page 81

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-11 v1.1, May 2008 4. In the Port T riggering Timeout fie ld, enter a value up to 99 99 minutes. This value controls the inactivity timer for the d esignated inbou nd ports. The inb ou nd po rts clo s e wh en the inactivity time expires. This is re quired because the router cann ...

  • NETGEAR WGR614 v8 - page 82

    54 Mbps Wir eless Router WG R614v8 User Manual 5-12 Fine-Tun ing Your Netw ork v1.1, May 2008 Using Universal Plug and Play Universal Plug and Play (UPnP) helps devices, su ch as Internet appliances and computers, to access the network and connect to other devices as needed. UPnP devices can automatically discover the services from other regist ere ...

  • NETGEAR WGR614 v8 - page 83

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-13 v1.1, May 2008 • Advertisement Period . The advertisement period is how often the ro uter broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default pe riod is 30 minutes. Shorter durat ions ensure that control points have current device stat ...

  • NETGEAR WGR614 v8 - page 84

    54 Mbps Wir eless Router WG R614v8 User Manual 5-14 Fine-Tun ing Your Netw ork v1.1, May 2008 • Choose placement carefully . For best results, place your router: – Near the center of the area in which your computers will operate. – In an elevated location such as a high shelf where the wirelessly connected computers have line-of-sight access ...

  • NETGEAR WGR614 v8 - page 85

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-15 v1.1, May 2008 From the main m enu of the brows er interface, un der Advanced, select QoS Setup . The QoS Setup screen displays: Y ou can enable WMM, Internet Access Q oS, Bandwi dth Control, as well as modify or create QoS rules. Using WMM QoS for Wireless Multimedia Applic ...

  • NETGEAR WGR614 v8 - page 86

    54 Mbps Wir eless Router WG R614v8 User Manual 5-16 Fine-Tun ing Your Netw ork v1.1, May 2008 The QoS Priority Rule List identifi es the rules that will be applied when you enable QoS. For convenie nce, the QoS Policy table lists many common app lications and online games that can benefit from QoS handling. Follow the inst ructions below to modify ...

  • NETGEAR WGR614 v8 - page 87

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-17 v1.1, May 2008 2. From the QoS Setup page, click Setup QoS Ru le to verify that one of the precon figured rules will meet your requirements. If not, click Add Priority Rule . The QoS - Priority Rules screen displays. 3. In the Priority Category list, select either Applicatio ...

  • NETGEAR WGR614 v8 - page 88

    54 Mbps Wir eless Router WG R614v8 User Manual 5-18 Fine-Tun ing Your Netw ork v1.1, May 2008 5. From the Priority drop-down list, select the priority that this traf fic should receive relative to other applications and traffic when accessing the Internet. The options are Low , Normal, High, and Highest. 6. Click Apply to save this rule to the QoS ...

  • NETGEAR WGR614 v8 - page 89

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-19 v1.1, May 2008 QoS for a MAC Address T o create a QoS policy for traf fic from a specific MAC address: 1. From the main menu, under Adva nced, click QoS Setup . The QoS Setup screen disp lays, as shown in Figure 5-6 on page 5-15 . 2. From the QoS Setup page, click Setup QoS ...

  • NETGEAR WGR614 v8 - page 90

    54 Mbps Wir eless Router WG R614v8 User Manual 5-20 Fine-Tun ing Your Netw ork v1.1, May 2008 Editing or Deleting an Existing QoS Policy T o edit or delete an existing QoS policy: 1. From the main menu, under Adva nced, click QoS Setup . The QoS Setup screen disp lays, as shown in Figure 5-6 on page 5-15 . 2. From the QoS Setup screen, click Setup ...

  • NETGEAR WGR614 v8 - page 91

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-21 v1.1, May 2008 • Y ou used a program to optimize MTU for performance reasons, and now yo u have connectivity or performance problems. If you suspect an MTU problem, a common solution is to change the MTU size to 1400. If you are willing to experiment, you can gradually red ...

  • NETGEAR WGR614 v8 - page 92

    54 Mbps Wir eless Router WG R614v8 User Manual 5-22 Fine-Tun ing Your Netw ork v1.1, May 2008 Overview of Home and Small Office Networking T echnologies Common connection t ypes and their spee d and security considerations are: • Broadband Internet . Y our Internet connection speed is determined by your modem type, such as ADSL or cable modem, as ...

  • NETGEAR WGR614 v8 - page 93

    54 Mbps Wireless Router WGR614v8 User Manual Fine-Tuning Your Network 5-23 v1.1, May 2008 • Wir ed Ethe rnet . As gigabit-speed Ethernet ports (10/100/1000 Mbps) become common on newer computers, wired Ethe rnet remains a go od choice for speed, economy , and security . Gigabit Ethernet can extend up to 100 meters with twisted-pair wiring of Cat ...

  • NETGEAR WGR614 v8 - page 94

    54 Mbps Wir eless Router WG R614v8 User Manual 5-24 Fine-Tun ing Your Netw ork v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 95

    6-1 v1.1, May 2008 Chapter 6 Using Network Monitoring T ools This chapter describes how to use the maintenance features of your W ireless-G Router Model WGR614v8. Y ou can ac cess these features by selec ting the items under Maintenance in the main menu of the browser interface. This chapter includes the following sections: • “V iewing W ireles ...

  • NETGEAR WGR614 v8 - page 96

    54 Mbps Wir eless Router WG R614v8 User Manual 6-2 Using Network Monitor ing Tools v1.1, May 2008 Ta b l e 6 - 1 des cribes the router status fields. T able 6-1. Wireless Router St atus Fields Field Description Account Name The host name assigned to the router . Hardware V ersion The hardware version of the router . Firmware V ersion T he version o ...

  • NETGEAR WGR614 v8 - page 97

    54 Mbps Wireless Router WGR614v8 User Manual Using Network Monitoring Tools 6-3 v1.1, May 2008 2. Click Connection S tatus to display the conn ection status. Wireless Port These settings apply to the wireless port of the router . Name (SSID ) The wireless network name (SSID) bein g used by the wireless port of the router . The defa ult is NETGEAR. ...

  • NETGEAR WGR614 v8 - page 98

    54 Mbps Wir eless Router WG R614v8 User Manual 6-4 Using Network Monitor ing Tools v1.1, May 2008 Ta b l e 6 - 2 describes the connection status settings. Click the Release button to release the connection status items (that is, all items return to 0). Click the Renew button to renew to the conn ection status items (that is, all items are refreshed ...

  • NETGEAR WGR614 v8 - page 99

    54 Mbps Wireless Router WGR614v8 User Manual Using Network Monitoring Tools 6-5 v1.1, May 2008 Ta b l e 6 - 3 describes the router statistics. T o change the polling frequency , enter a time in seconds in the Poll Interval field, and click Set Interval . T o stop the polling entirely , click St o p . V iewing a List of Attached Devices The Attached ...

  • NETGEAR WGR614 v8 - page 100

    54 Mbps Wir eless Router WG R614v8 User Manual 6-6 Using Network Monitor ing Tools v1.1, May 2008 For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address. T o force the ro uter to look for attached devices, click Refresh . Managing the Configuration File The configuration settin ...

  • NETGEAR WGR614 v8 - page 101

    54 Mbps Wireless Router WGR614v8 User Manual Using Network Monitoring Tools 6-7 v1.1, May 2008 T o restore your settings from a saved configuration file, enter the full path to the file on your computer , or click Browse to browse to the file. When you have located it, click Restore to send the file to the router . The rout er then reboots automati ...

  • NETGEAR WGR614 v8 - page 102

    54 Mbps Wir eless Router WG R614v8 User Manual 6-8 Using Network Monitor ing Tools v1.1, May 2008 The Checking for Firmware Updates scre e n a ppears at login unless you clear the Check for Updated Firmware Upon Log-in ch ec k bo x. A screen is also provided for u pgrading the router . From the main menu of the browser in terface, under Maintenance ...

  • NETGEAR WGR614 v8 - page 103

    54 Mbps Wireless Router WGR614v8 User Manual Using Network Monitoring Tools 6-9 v1.1, May 2008 Upgrading Automatically to New Router Sof tware If you have selec te d Check for New V ersion Upon Log-in , your router alerts you to the new software when you log in. Ot he rwise, you can click the Check button in the Router Upgrade screen to search for ...

  • NETGEAR WGR614 v8 - page 104

    54 Mbps Wir eless Router WG R614v8 User Manual 6-10 Using Network Monitori ng Tools v1.1, May 2008 Upgrading Manually to New Router Sof tware T o manually select, download, and in stall new software to your router: 1. Under Maintenance on the main menu, select Router S tatus . Note the version nu mber of your router firmware. 2. Go to the WGR614v8 ...

  • NETGEAR WGR614 v8 - page 105

    54 Mbps Wireless Router WGR614v8 User Manual Using Network Monitoring Tools 6-1 1 v1.1, May 2008 Enabling Remote Management Access Using the Remote Management feature, you can allow a user on the Internet to configure, upgrade, and check the status of your W ireless-G Router. From the main menu of the browser interface, under Advanced, select Remot ...

  • NETGEAR WGR614 v8 - page 106

    54 Mbps Wir eless Router WG R614v8 User Manual 6-12 Using Network Monitori ng Tools v1.1, May 2008 2. Under Allow Remote Access By , sp ecify what external IP addr esses will be allowed to access the router’ s remote management. • T o allow access from any IP address on the Interne t, select Everyone . • T o allow access from a range of IP ad ...

  • NETGEAR WGR614 v8 - page 107

    7-1 v1.1, May 2008 Chapter 7 T roubleshooting This chapter provides information about trou bleshooting y our Wireless- G Router Model WGR614v8. After each proble m description, instru ctions are provided to help you diagnose and solve the problem. As a first st ep, please review the Quick T ips . This chapter includes the following sections: • ? ...

  • NETGEAR WGR614 v8 - page 108

    54 Mbps Wir eless Router WG R614v8 User Manual 7-2 Troubleshooting v1.1, May 2008 4. T urn on the wireless router and wait 1 minute. 5. T urn on the computers. Make sure that the Ethernet cabl es are securely plugged in. • The Internet status light on the wireless router is on if the Ethernet cable connecting the wireless router and the modem is ...

  • NETGEAR WGR614 v8 - page 109

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-3 v1.1, May 2008 T roubleshooting Basic Functions After you turn on power to the router , the following sequ ence of events should occur: 1. When power is first applied, veri fy that the Power light is on. 2. After approximately 10 seconds, verify that: a. The Power light is solidly on. ...

  • NETGEAR WGR614 v8 - page 110

    54 Mbps Wir eless Router WG R614v8 User Manual 7-4 Troubleshooting v1.1, May 2008 If the error persists, you might hav e a ha rdware problem and shou ld contact T echnical Sup port at www .netgear .com/support . The Internet or Ethernet port light s are not on. If either the Ethernet port lights or the Intern et light does not come on when the Ethe ...

  • NETGEAR WGR614 v8 - page 111

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-5 v1.1, May 2008 • Make sure that your browser has Java, JavaS cript, or ActiveX enabled. If you are using Internet Explorer , click Refresh to be sure that the Java applet is loaded. • T ry closing the browser and opening it again, or try a different browser . • Make sure that yo ...

  • NETGEAR WGR614 v8 - page 112

    54 Mbps Wir eless Router WG R614v8 User Manual 7-6 Troubleshooting v1.1, May 2008 • If your ISP requires a login , the login name or password might be set incorrectly . • Y our ISP might check for your computer ’ s host name. Assign the computer host name of your ISP account as the account name in the Basic Settings screen. • Y our ISP allo ...

  • NETGEAR WGR614 v8 - page 113

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-7 v1.1, May 2008 T esting the LAN Path to Y our Rou ter Y ou can ping the router from your compu ter to veri fy that the LAN path to your router is set up correctly . T o ping the router from a running W indows PC: 1. From the W indows toolbar, cl ick Start, and then select Run . 2. In ...

  • NETGEAR WGR614 v8 - page 114

    54 Mbps Wir eless Router WG R614v8 User Manual 7-8 Troubleshooting v1.1, May 2008 T esting the Path from Y our Computer to a Remote Device After verifying that the LAN path works correctly , test the path from your computer to a remote device. 1. From the W indows toolbar , click the Start button, and then select Run . 2. In the W indows Run window ...

  • NETGEAR WGR614 v8 - page 115

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-9 v1.1, May 2008 • Date shown is January 1, 2000. Cause: The router has not yet successfully reac hed a network time server . Check that your Internet access settings are correct . If you have just completed configuring the router , wait at least 5 minutes, and check the date and time ...

  • NETGEAR WGR614 v8 - page 116

    54 Mbps Wir eless Router WG R614v8 User Manual 7-10 Troubleshooting v1.1, May 2008 • Is your router set to a wireless standard that is not supported by yo ur wireless card? Check the Mode setting as described in “V iewing and Configuring Basic ISP Settings” on page 1-5 . If your wireless network appears, but the sign al strength is weak, chec ...

  • NETGEAR WGR614 v8 - page 117

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-11 v1.1, May 2008 1. Select Wir el e s s Settings under Setup in the main menu of the WGR614v8 ro uter . 2. For the wireless network name (SSID), use the default name, or choose a suitable descriptive name. In the Name (SSID) field, you can enter a value of up to 32 alphanumeric charact ...

  • NETGEAR WGR614 v8 - page 118

    54 Mbps Wir eless Router WG R614v8 User Manual 7-12 Troubleshooting v1.1, May 2008 6. For Security Options, select None . 7. Click Apply to save your changes. 8. Select Wir el e s s Settings under Advanced in the main menu of the WGR614v8 router . 9. Make sure that the Enable Wireless Router Radio and Enable SSID Br oadcast check boxes are selected ...

  • NETGEAR WGR614 v8 - page 119

    54 Mbps Wireless Router WGR614v8 User Manual Troubleshooting 7-13 v1.1, May 2008 Restoring the Default Co nfiguration and Password This section explains how to restore the fact ory default configuratio n settings, changing the router ’ s administration password back to pass word . Y ou can erase the current configuration and restore factory defau ...

  • NETGEAR WGR614 v8 - page 120

    54 Mbps Wir eless Router WG R614v8 User Manual 7-14 Troubleshooting v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 121

    Technical Specifications A-1 v1.1, May 2008 Appendix A T echnical S pecifications This appendix provides technical specificatio ns for the W ireless-G Router Model WGR614v8. Specification Description Network Protocol and Standards Compatibility Data and routing protocols TCP/IP , RIP-1, RIP-2, DHCP PPP over Ethernet (PPPoE) Power Adapter North Amer ...

  • NETGEAR WGR614 v8 - page 122

    54 Mbps Wir eless Router WG R614v8 User Manual A-2 Technical Specifications v1.1, May 2008 Wireless Radio data rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, and 54 Mbps Auto Rate Sensing Frequency 2.4–2.5 Ghz Data encoding 802.1 1b: Direct S equence S pread S p ectrum (DSSS) 802.1 1g: Orthogonal Fre quency Division Multiplexing (OFDM) Maximum comput ...

  • NETGEAR WGR614 v8 - page 123

    54 Mbps Wireless Router WGR614v8 User Manual Technical Specifications A-3 v1.1, May 2008 Restoring the Default User Name and Password Y ou can restore the factory default configuration settings to reset the router’ s user name to admin, the password to password, and the IP address to www .routerlogin.net . This procedure er ases your current conf ...

  • NETGEAR WGR614 v8 - page 124

    54 Mbps Wir eless Router WG R614v8 User Manual A-4 Technical Specifications v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 125

    Related Documents B-1 v1.1, May 2008 Appendix B Related Document s This appendix provides links to reference documents you c an use to gain a more comple te understanding of the technolog ies used in your NETGEAR product. Document Link TCP/IP Networking Basics http://documentation.netgear .com/refer ence/enu/ tcpip/index.htm Wireless Networking Bas ...

  • NETGEAR WGR614 v8 - page 126

    54 Mbps Wir eless Router WG R614v8 User Manual B-2 Related Documents v1.1, May 2008 ...

  • NETGEAR WGR614 v8 - page 127

    Index-1 v1.1, May 2008 Index A access blocking 3-1 remote 6-1 1 restricting by MAC address 2-17 viewing logs 3-6 access control turning off 1-1 1 , 7-1 2 turning on 2-19 access points 4-10 accessing remo te computer 5-2 account name 1-6 , 6-2 ActiveX 7-5 adding custom service 5-7 priority rules 5-17 , 5-1 8 , 5-19 reserved IP addresses 4-3 static r ...

  • NETGEAR WGR614 v8 - page 128

    54 Mbps Wir eless Router WG R614v8 User Manual Index-2 v1.1, May 2008 WPS 2-15 See also adding connection mode 1-8 connection status settings 6-4 connection types 5-22 content filtering 3-1 crossover cable 7-4 CTS/R T S Threshold 2-1 1 custom service (port forwarding) 5-7 Customer support ii D data packets, fragmented 5-20 date and time, troublesho ...

  • NETGEAR WGR614 v8 - page 129

    54 Mbps Wireless Router WGR614v8 User Manual Index-3 v1.1, May 2008 inbound traffic, allowing or blocking 5-1 interference, reducing 5-14 Internet connection troubleshooting 7-5 Internet light, troubleshooting and 7-3 Internet port, status 6-2 Internet Relay Chat (IRC) 5-3 Internet services , blocking access 3-3 interval, poll 6-5 IP addresses auto ...

  • NETGEAR WGR614 v8 - page 130

    54 Mbps Wir eless Router WG R614v8 User Manual Index-4 v1.1, May 2008 path, testing 7-8 PDF , printing xiii performance, optim izing 5-13 PIN 2-14 , 2-16 ping 4-7 , 7-6 placement, router 5-14 poll interval 6-5 port filterin g 3-3 port forwarding configuring 5-6 example 5-5 port numbers 3-3 port status 6-5 port triggering configuring 5-9 example 5-3 ...

  • NETGEAR WGR614 v8 - page 131

    54 Mbps Wireless Router WGR614v8 User Manual Index-5 v1.1, May 2008 SSID 1-10 , 2-7 , 6-3 , 7-1 1 SSID broadcast 1-1 1 , 2-1 1 , 7-12 static IP addresses 1-6 static routes 4-8 statistic s, usage 6-4 status lights, troubleshooting and 7-3 status, viewing 6-1 streaming video and audio 5-23 subnet mask 4-2 , 6-2 Support ii system up time 6-5 T TCP/IP ...

  • NETGEAR WGR614 v8 - page 132

    54 Mbps Wir eless Router WG R614v8 User Manual Index-6 v1.1, May 2008 ...

Manufacturer NETGEAR Category Network Router

Documents that we receive from a manufacturer of a NETGEAR WGR614 v8 can be divided into several groups. They are, among others:
- NETGEAR technical drawings
- WGR614 v8 manuals
- NETGEAR product data sheets
- information booklets
- or energy labels NETGEAR WGR614 v8
All of them are important, but the most important information from the point of view of use of the device are in the user manual NETGEAR WGR614 v8.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals NETGEAR WGR614 v8, service manual, brief instructions and user manuals NETGEAR WGR614 v8. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product NETGEAR WGR614 v8.

Similar manuals

A complete manual for the device NETGEAR WGR614 v8, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use NETGEAR WGR614 v8 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of NETGEAR WGR614 v8.

A complete NETGEAR manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual NETGEAR WGR614 v8 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the NETGEAR WGR614 v8, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the NETGEAR WGR614 v8, that we can find in the current document
3. Tips how to use the basic functions of the device NETGEAR WGR614 v8 - which should help us in our first steps of using NETGEAR WGR614 v8
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with NETGEAR WGR614 v8
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of NETGEAR WGR614 v8 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning NETGEAR WGR614 v8?

Use the form below

If you did not solve your problem by using a manual NETGEAR WGR614 v8, ask a question using the form below. If a user had a similar problem with NETGEAR WGR614 v8 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)