Manual Polycom MD4000

15 pages 0.58 mb
Download

Go to site of 15

Summary
  • Polycom MD4000 - page 1

    June 2008 Edition 1725-36164-001 Version B VIEW Certified Configuration Guide MeshDynamics MD4000 Series APs ...

  • Polycom MD4000 - page 2

    Configuration Guide PN: 1725-36164-001_B.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries. All ot her trademarks used herein are the propert y of their respective owners. Patent Info ...

  • Polycom MD4000 - page 3

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and WLAN infrastructure products. The products listed below have been thoroughly tested in Po ...

  • Polycom MD4000 - page 4

    Configuration Guide PN: 1725-36164-001_B.doc 4 Monday through Friday, 6 a.m. to 6 p.m. Mountain time. You may also contact Polycom Technical Support at boul-technicalsupport@polycom.com for assistance. Network Topology The following topology was tested during VIEW Certification testing. SpectraLink Wireless Telephones ...

  • Polycom MD4000 - page 5

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 5 Initial Configuration Settings Network Management System (NMS) is required to configure the access point. 1. Download http://www.meshdynamics.com/downloads/MDNetworkView er82.exe from www.meshdynamics.com 2. The NMS must run from a machine on the same network . 3. The NMS requires Java 1.4 Run ...

  • Polycom MD4000 - page 6

    Configuration Guide PN: 1725-36164-001_B.doc 6 Configuration Settings The settings listed below are recommended for interoperability and high performance between SpectraLink Wireless Telephones and the MeshDynamics Wireless LAN System. ...

  • Polycom MD4000 - page 7

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 7 Configuring Interfaces 1. Right-click the access point icon (Node). 2. Select Configure Node from the shortcut menu to begin configuration. 3. Click the Interfaces tab in the Node Configuration window. 4. Select the appropriate radio interface: a. Click the 5G Down Link option if the SpectraLi ...

  • Polycom MD4000 - page 8

    Configuration Guide PN: 1725-36164-001_B.doc 8 5. Enter the ESSID to match the SpectraLink Wireless Telephones. 6. Adjust the Power Le vel Setti ng and Dynamic Channel Management setting for appropriate level/channel as determined by your facility site survey, optimized for wireless voice traffic. If Dynamic Channel Management is set to Auto , the ...

  • Polycom MD4000 - page 9

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 9 c. If SpectraLink Wireless Telephones are configured for 802.11g only, select the 11g check box for 2.4G Mode . All rates are set as basic rates; multicast traffic will be transmitted at the lowest basic rate for each band (1Mb/s for 802.11b, 6Mb/s for 802.11g, and 6Mb/s for 802.11a). ...

  • Polycom MD4000 - page 10

    Configuration Guide PN: 1725-36164-001_B.doc 10 QOS Settings 1. Click the VLAN tab in the Node Configuration window. 2. To adjust QoS settings, click the “New VLAN” icon. 3. Click the “ … ” button to the far right of 802.11e Category to edit the 802.11e category for that Node. 4. Select Voice from the 802.11e Access Categ ory drop-down li ...

  • Polycom MD4000 - page 11

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 11 Security Settings WPA2-PSK setup 1. Click the Security tab in the Node Configuration window. 2. Click the WPA Personal option. 3. At Mode , select WPA2/802.11i from the drop-down list. 4. Enter a Passphrase that matches the entry on the SpectraLink Wireless Telephones. 5. Click the Save butto ...

  • Polycom MD4000 - page 12

    Configuration Guide PN: 1725-36164-001_B.doc 12 Effistream™ Settings Effistream allows setting packet-based policies for QoS. Effistream is set so that the access point can serve SVP Packet s more efficiently. 1. Click the Effistream tab in the Nod e Configuration window. 2. Click the Add Rules button. 3. In the Rule Properties dialog box: a. Let ...

  • Polycom MD4000 - page 13

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 13 4. Select the previous rule ( Ethernet Type … ). 5. Click the Add Rule button. 6. In the Rule Properties dialog box: a. Let Criteria be IP Protocol . b. In the Protocol field, type 119 . c. Click the Save button. ...

  • Polycom MD4000 - page 14

    Configuration Guide PN: 1725-36164-001_B.doc 14 7. Under Rules , select IP Protocol=119 . 8. Click the Add Action button. 9. In the Action Properties dialog box: a. Select the Queued Retry check box. b. Set Transmit Rate as 0 (Auto) . c. Set 802.11e Category as Voice . d. Click the Save button to update the Node. 10. Reboot the Node for settings to ...

  • Polycom MD4000 - page 15

    MeshDynamics 4000 Series APs PN: 1725-36164-001_B.doc 15 Further Assistance For additional details on NMS installation and configuration, see http://www.meshdynamics.com/documents/MD4000_NMSGUIDE. pdf or contact http://www.meshdynamics.com for support. ...

Manufacturer Polycom Category Telephone

Documents that we receive from a manufacturer of a Polycom MD4000 can be divided into several groups. They are, among others:
- Polycom technical drawings
- MD4000 manuals
- Polycom product data sheets
- information booklets
- or energy labels Polycom MD4000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Polycom MD4000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Polycom MD4000, service manual, brief instructions and user manuals Polycom MD4000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Polycom MD4000.

Similar manuals

A complete manual for the device Polycom MD4000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Polycom MD4000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Polycom MD4000.

A complete Polycom manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Polycom MD4000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Polycom MD4000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Polycom MD4000, that we can find in the current document
3. Tips how to use the basic functions of the device Polycom MD4000 - which should help us in our first steps of using Polycom MD4000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Polycom MD4000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Polycom MD4000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Polycom MD4000?

Use the form below

If you did not solve your problem by using a manual Polycom MD4000, ask a question using the form below. If a user had a similar problem with Polycom MD4000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)