English dropdown-ico

Manual Avocent ACS 6000

70 pages 1.33 mb
Download

Go to site of 70

Summary
  • Avocent ACS 6000 - page 1

    For T echnical Support : www.avocent.com/support 590- 7 70-50 1B C yclades ® ACS 6000 Command Reference Guide ...

  • Avocent ACS 6000 - page 2

    FCC Warning Statement The Cyclades ACS advanced console server has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener ...

  • Avocent ACS 6000 - page 3

    Cyclades ® ACS 6000 Advanced Console Server Command Reference Guide Avocent, the Avocent lo go, The Power of Being There, DSView and Cyclades are registered trademarks of Avocent Cor p oration or its affiliates in the US and other countrie s. All other marks are the property of their respective owners. © 2008 A vocent Corporation. 590-770-5 01B ...

  • Avocent ACS 6000 - page 4

    Instructions This symbol is inte nded to alert the user to the pres ence of important operating and maintenance (servicing) instructions in the lite rat ure accompanying the appliance. Dangerous V oltage This symbol is intende d to al ert the user to the presen ce of uninsulated dangerous voltage within the prod uct’ s enclosure that ma y be of s ...

  • Avocent ACS 6000 - page 5

    iii Table of Contents List of Tables ............... ...................... .......................... .......................... ....................... . .v i i Chapter 1: Introduction, Navigation and Commands ........... ................ ............. ........... 1 Access Options and How to Log Into the CLI ............. .................... ... ...

  • Avocent ACS 6000 - page 6

    iv Cyclades ACS 600 0 Advanced Console Server Command Reference Guide killuser ............. ................. ................. ................... ................. ................. ................... ............... 14 sendmsg............ ................. ................. ................... ................. ................. .............. ...

  • Avocent ACS 6000 - page 7

    Table of Contents v Overview Options .................... ................. ................. ................... ................. .................... . ............. 49 Information Options ................. ................. ... ................ ................. ... ................. ... ............... .. ........... 50 Active Sessions Informa ...

  • Avocent ACS 6000 - page 8

    vi Cyclades ACS 6000 Advanced Console Server Command Reference Guide ...

  • Avocent ACS 6000 - page 9

    vii List of Tables Table 1.1: ACS 6000 Advanced Console Server Port Descriptions ............ ................ .................... .. 2 Table 2.1: Port Access an d Configuration Tasks ...... .................................................. ............ ........ 19 Table 2.2: Topology Parameters ........... ................. ... .. .............. ...

  • Avocent ACS 6000 - page 10

    viii Cyclades ACS 6000 Advan ced Console Server Command Reference Guide ...

  • Avocent ACS 6000 - page 11

    1 CHAPTER 1 Introduction, Navigation and Commands The Cyclades ACS 6000 advanced cons ole server is a 1U appliance that serves as a single point for access and administration of connected devices, such as target de vice consoles, modems and power devices. ACS 6000 consol e servers support secure remote data center managem ent and out-of-band manage ...

  • Avocent ACS 6000 - page 12

    2 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Figure 1.1: ACS 6000 Advanced Con sole Server Port s T able 1.1: ACS 6000 Advan ced Console Server Port Descriptions Number Description 1S e r i a l P o r t 1 NOTE: Serial port s are also referred to with tty device names, such a s ttSy1, ttyS2 and so forth. 2 Eth1 (eth1) 3 Eth0 (e ...

  • Avocent ACS 6000 - page 13

    Chapter 1: Introduction, Naviga tion and Commands 3 Access Options and How to Log Into the CLI The CLI utility can be accesse d in the following ways: • Through a local terminal or a computer that has a terminal em ulation program connected to the console port of the console server with session settings of 9600, 8, N and 1, with no flow control. ...

  • Avocent ACS 6000 - page 14

    4 Cyclades ACS 6000 Advanced Console Server Command Reference Guide For example, in the Web Manager, user configuration is done wh en an administrator selects Appliance Settings - Users - Local Accounts - User Names to get to the User Names screen. To navigate to the equivalent configurat ion lev e l in the CLI, an administrator woul d navi gate in ...

  • Avocent ACS 6000 - page 15

    Chapter 1: Introduction, Naviga tion and Commands 5 A prompt like the following appears at each level: --:- appliance_settings cli-> NOTE: CLI commands are case sen sitive. At any level, you can press Tab Tab at the prompt to see the comman ds that can be entered at the current level. ---:- appliance_settings cli->< Ta b >< Tab > ...

  • Avocent ACS 6000 - page 16

    6 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Parameters Some CLI commands take parameters. If you press Ta b Tab after a command that requires a parameter, you are prompted to enter the parameter. Command Line Synt ax NOTE: Square brackets ([ ]) denote an optional element . Each element is separated by a sp ace. There are no ...

  • Avocent ACS 6000 - page 17

    Chapter 1: Introduction, Naviga tion and Commands 7 | : or () : group CLI Command Set NOTE: Most of the commands w ork from any location when the path to the command parameter is included. NOTE: The word “node” refers to an entity su ch as a r oute, host or user , which can be add ed, configured or deleted. help Generate a help message about ho ...

  • Avocent ACS 6000 - page 18

    8 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Syntax: --:- units cli-> add <Path> Example: --:- units cli-> add appliance_setti ngs/network/hosts --:#- [hosts] cli-> delete Delete a node. Syntax: --:- units cli-> delete <Path> <para meter> cd Change directory (level). Syntax: --:- units cli-> c ...

  • Avocent ACS 6000 - page 19

    Chapter 1: Introduction, Naviga tion and Commands 9 --:- overview cli-> pwd Display the path to the current level (print work ing director y). Syntax: --:- units cli-> pwd connect Connect to a serial or auxiliary port. Syntax: --:- topology cli-> connect < port_name > Example: --:- topology cli-> connect 77-77-70-p-2 -or- (Optiona ...

  • Avocent ACS 6000 - page 20

    10 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Password: -or- Type the hotkey to suspend the conn ectio n: Ctrl + z share Connect to a serial or au xiliary port as an addi tional, read/write user. Syntax: --:- topology cli-> share < port_name > Example: --:- topology cli-> share 77-77-70-p -2 Displays the fo llowin ...

  • Avocent ACS 6000 - page 21

    Chapter 1: Introduction, Navigati on and Commands 11 NOTE: Y ou must log into the CLI as root to have full c ontr ol o ver the local directory p ath. All normal FTP commands apply . scp Perform a secure shell copy. Syntax: --:- units cli-> scp [[ user @ ] host1 :] file 1 [...] [[ u ser @] host2 :] file2 set Set a parameter. Syntax: --:- units cl ...

  • Avocent ACS 6000 - page 22

    12 Cyclades ACS 6000 Advanced Console Server Command Reference Guide show/ls Show the available director ies, commands or paramete rs at the current location. Syntax: --:- units cli-> show -or- --:- units cli-> ls Example: --:- units cli-> show user_profile user_profile change_password/ --:- units cli-> power_cycle, power_o ff and power ...

  • Avocent ACS 6000 - page 23

    Chapter 1: Introduction, Navigati on and Commands 13 --:- units cli-> cd power_management /management/ < PDU_ID > /outlet_table --:- outlet_table cli-> [ cycle | on | of f | lock | unlock ] <outlet_number[,..,outlet_number]> Examples: --:- units cli-> cd power_management/managem ent/myPD U/outlet _table --:- outlet_table cli-&g ...

  • Avocent ACS 6000 - page 24

    14 Cyclades ACS 6000 Advanced Console Server Command Reference Guide FOOD HUGH SKI ALMA LURK BRAD S pecial Multi-session Commands The following commands require navigation to an enabled and configu red port to which one or more users are simultaneously connected. To get to the port , enter the follow ing command. --:- units cli-> cd topology/< ...

  • Avocent ACS 6000 - page 25

    Chapter 1: Introduction, Navigati on and Commands 15 --:- units cli -> inspectdbuf overvi ew/appliance_data_logging The following commands are available for inspectdbuf: • Return - Scroll forward one line. • Ctrl + F - Scroll forward one window . • Ctrl + B - Scroll backward o ne window . • /pattern - Search foward in the file for the fi ...

  • Avocent ACS 6000 - page 26

    16 Cyclades ACS 6000 Advanced Console Server Command Reference Guide CLI Equivalent Actions to W eb Manager Checkbox Sele ction NOTE: The following example pr ocedure, which configures IP v6, illustrates the actions to use in the CLI to enable or disable an option when a checkbox woul d be selected or deselected in the Web Manager . T o configure I ...

  • Avocent ACS 6000 - page 27

    Chapter 1: Introduction, Navigati on and Commands 17 [X] get_domain_from_dhcpv6 8. Enter commit . ...

  • Avocent ACS 6000 - page 28

    18 Cyclades ACS 6000 Advanced Console Server Command Reference Guide ...

  • Avocent ACS 6000 - page 29

    19 CHAPTER 2 Port Access and Configuration Examples By default, all serial ports an d the AUX/Modem port are disabled. The administrator must enable and configure the ports before anyone can use them. Con figuration of ports differs based on the type of connected device, whi ch can be either a device consol e, a PDU or modem. By default, all users ...

  • Avocent ACS 6000 - page 30

    20 Cyclades ACS 6000 Advanced Console Server Command Reference Guide V iew Information About the Co nsole Server and Connected Devices When a regular user or an adminis trator enters show at the Topology level, information about the following appears in the form at show n in Table 2.2: • The console server • The AUX/Modem port (if it is enabled ...

  • Avocent ACS 6000 - page 31

    Chapter 2: Port Access and Conf iguration Examp les 21 T o view information about the console server and co nnected devices: 1. Log into the CLI and enter cd topo logy to change to th e T opology level. --:- units cli-> cd topology Please wait -- this could take a whi le 2. Enter sh ow . Info rmation about the console server and the ports the cu ...

  • Avocent ACS 6000 - page 32

    22 Cyclades ACS 6000 Advanced Console Server Command Reference Guide name: myPDU port: 3/1 type: PM20i|30A status: 3|20 action: 77-77-70-p-1/ 77-77-70-p-2/ myPDU/ --:- topology cli-> Connect to a Device Console Connected to a Serial Port The following procedure is an exam ple of how an administrat or or an authorized user can connect to a device ...

  • Avocent ACS 6000 - page 33

    Chapter 2: Port Access and Conf iguration Examp les 23 Last login: Tue Oct 2 13:09:04 2007 on :0 Linux fremont-techpubs 2.6.15-28-386 #1 PREEMPT Wed Jul 18 22:50:32 UTC 2007 i68 6 GNU/Linux # Manage Power for a Device Connect ed to an Outlet on a PDU See power_cycle, power _off and power_on on page 12 for how an admi nistrator or an y authorized us ...

  • Avocent ACS 6000 - page 34

    24 Cyclades ACS 6000 Advanced Console Server Command Reference Guide 8. Enter set port_settings/serial_ profile=cas then enter comm it as shown to assign the CAS profile and save the settings. --:- port_settings cli-> set port_se ttings/ serial_profile=cas **:- port_settings cli-> commit --:- port_settings cli-> 9. Enter set port_settings/ ...

  • Avocent ACS 6000 - page 35

    Chapter 2: Port Access and Conf iguration Examp les 25 6. T ype set port_settings/ then press Ta b to view the options for the Port _Settin gs parameter . --:- port_settings cli-> set port_se ttings/ < Tab > rj45_pin-out status serial_profile 7. Enter set port_settings/ status=enabled serial_profile= power then enter commit to set the Seri ...

  • Avocent ACS 6000 - page 36

    26 Cyclades ACS 6000 Advanced Console Server Command Reference Guide ...

  • Avocent ACS 6000 - page 37

    27 CHAPTER 3 CLI Appliance Settings Options This chapter describes the Appliance Setting s options. Only administrators and authori zed users can access the appliance_settings level. These procedures assume y ou have logged into the CLI as an administrator and are at the --:- units cli-> prompt. NOTE: In the tables that show output from the show ...

  • Avocent ACS 6000 - page 38

    28 Cyclades ACS 6000 Advanced Console Server Command Reference Guide See Table 3.1 through Table 3.13 for options available at each le vel and their default settings, where applicable. Parameters with an X beside them were selected, either as the default or from the previous configuration. Appliance_Settings/Global_Settings 1. Enter cd appliance_se ...

  • Avocent ACS 6000 - page 39

    Chapter 3: CLI Appliance Sett ings Options 29 Appliance_Settings/Network 1. Enter cd appliance_settings/netwo rk to na vigate to the Network le vel . --:- units cli-> cd appliance_settings/netwo rk 2. Enter show to view the list of available options. string_9 = string_10 = sensors current_temperature: (deg_c, display only) maximum_temperature_(d ...

  • Avocent ACS 6000 - page 40

    30 Cyclades ACS 6000 Advanced Console Server Command Reference Guide [X] enable_ipv6 (enable d by default) [ ] get_dns_from_dhcpv6 [ ] get_domain_from_dhcpv6 devices eth0 settings status=enabled/disabled (*) ipv4_method (*) dhcp ( )static address: nnn.nnn.nnn.nnn mask: nnn.nnn.nnn.nnn ( ) ipv4_unconfigured ( )ipv6_method (*) stateless ( ) dhcpv6 ( ...

  • Avocent ACS 6000 - page 41

    Chapter 3: CLI Appliance Sett ings Options 31 mask: nnn.nnn.nnn.nnn ( ) ipv4_unconfigured ( ) ipv6_method (*) stateless ( ) dhcpv6 ( ) static ( ) address / prefix_length ( ) ipv6_unconfigured mac address: (information only) bonding bonding with eth0 as primary and eth1 as second mode of access mii mon (milliseconds) = 100 (default) up delay (millis ...

  • Avocent ACS 6000 - page 42

    32 Cyclades ACS 6000 Advanced Console Server Command Reference Guide IPv6 IPv4 addresses are always enabled. An administ rator can also enable IPv6 addres ses at the appliance_settings/netw ork /ipv6 level. A procedure to enable IPv6 is us ed as an example in CLI Equivalent Actions to Web Manager Checkbox Selection on page 16. Devices The procedure ...

  • Avocent ACS 6000 - page 43

    Chapter 3: CLI Appliance Sett ings Options 33 --:- settings cli-> show Host s The following procedure describes how to add a host to the hosts table. T o add a host to the host t able: 1. Enter cd appliance_settings/netwo rk/ho sts to navigate to the Hosts level. --:- units cli-> cd appliance_settings/netwo rk/hosts 2. Enter show to view the ...

  • Avocent ACS 6000 - page 44

    34 Cyclades ACS 6000 Advanced Console Server Command Reference Guide alias: 127.0.0.1/add 172.26.31.164/ 7. Enter cd <IP_address>/settings to navigate to the level where you can perform additio nal configuration of the host entry . --:- hosts cli-> cd 172.26.31.164/settings 8. Enter show to view the additions to the host table and the Sett ...

  • Avocent ACS 6000 - page 45

    Chapter 3: CLI Appliance Sett ings Options 35 ( ) static address = prefix_length = gateway = (*) ipv6_address_unconfigure d mac address: 00:e0:86:0c:49:7a dns: primary = 172.26.29.4 dns: primary = 172.26.29.4 secondary = domain = corp.avocent.com hostname = ACS6016-0270095142 Some basic and useful keys are: - tab (once/twice) - shows the next possi ...

  • Avocent ACS 6000 - page 46

    36 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Appliance_Settings/Port s Enter cd appliance_se tti ngs/ports to navigate to the Po rt s level. --:- units cli-> cd appliance_settin gs/ports T able 3.3: Ports Options Ports Navigation T ree physical_ports serial_ports auxiliary_ports cas_profile default_settings general alerts ...

  • Avocent ACS 6000 - page 47

    Chapter 3: CLI Appliance Sett ings Options 37 T o enable and assign the Serial profile to a serial port: 1. Enter cd appliance_se tti ngs/ports/physical _po rts/serial_ports/ <n> /port_settings to navigate to the ports_settings le vel. Po rt 3 is used in the exam ple. --:- units cli-> cd appliance_settings/ports /physica l_ports/ serial_po ...

  • Avocent ACS 6000 - page 48

    38 Cyclades ACS 6000 Advanced Console Server Command Reference Guide --:- port_settings cli-> set port_se ttings/ status=enabled serial_profile=cas **:- port_settings cli-> commit --:- port_settings cli-> T o enable and configure the AUX/Modem port: 1. Enter cd appliance_se ttings/ports/physi c al_ports/auxiliary_ports/ttym1/ aux_port_sett ...

  • Avocent ACS 6000 - page 49

    Chapter 3: CLI Appliance Sett ings Options 39 --:- units cli-> cd appliance_settings/ports /dial-in _profile -or- --:- units cli-> cd appliance_settings/ports /power_p rofile Appliance_Settings/Plugga ble Devices Enter cd appliance_settings/p lu ggable_devices to navigate to the pluggable_devices level. --:- units cli-> cd appliance_settin ...

  • Avocent ACS 6000 - page 50

    40 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Appliance_Setting s/Authentication Enter cd appliance_se tti ngs/authentication to navigate to the authentication level. --:- units cli-> cd appliance_settin gs/authentication NOTE: Kerberos does not work unless the adm inistrator copies th e /etc/krb5.keyt ab file from the Ker ...

  • Avocent ACS 6000 - page 51

    Chapter 3: CLI Appliance Sett ings Options 41 Appliance_Settings/Users Enter cd appliance_settings/users to naviga te to the users lev e l. --:- Units cli-> cd appliance_settin gs/users T o add a user and password : 1. Enter cd appliance_settings/users /local_accounts/user_names to n avigate to the user_names level. --:- units cli-> cd applia ...

  • Avocent ACS 6000 - page 52

    42 Cyclades ACS 6000 Advanced Console Server Command Reference Guide --:- user_names cli-> add --:#- [user_name] cli-> set user_information / user_name=fred password=smith123abc confirm_passwor d=smith123abc --:#- [user_names] cli-> 3. Enter save . --:#- [user_names] cli-> save 4. Enter show to verify that the new user has been added. - ...

  • Avocent ACS 6000 - page 53

    Chapter 3: CLI Appliance Sett ings Options 43 NOTE: T o set a rule, you must enab le the interface, set the rule for the interfac e and physically connect the interface to the network. Appliance_Setti ngs/IPSec(VPN) Enter cd appliance_settings/ipse c(vp n) to navigate to the ipsec(vpn) level. --:- units cli-> cd appliance_settin gs/ipsec(vpn) T ...

  • Avocent ACS 6000 - page 54

    44 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Appliance_Settings/SNMP Enter cd appliance_se ttings/snmp to navigate to t he snmp level . --:- units cli-> cd appliance_settin gs/snmp ip_address = next_hop = subnet = ipsec(vpn)_authentication authentication_method ( ) rsa_key remote_side_rsa = local_side_rsa = ( ) secret pre ...

  • Avocent ACS 6000 - page 55

    Chapter 3: CLI Appliance Sett ings Options 45 Appliance_Settings/Date and T ime Enter cd appliance_settings/date_a nd_time to navigate to the date_and_time level. --:- units cli-> cd appliance_settin gs/date_and_time ( ) version v1/v2 ipv6 source ( ) version v3 authentication_type md5 sha authentication_pass_phrase des_pass_phrase minimum_authen ...

  • Avocent ACS 6000 - page 56

    46 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Appliance_Settings/ Boot Configuration Enter cd appliance_se ttings/boot_confi guration to navigate to the boot_configuration level . --:- units cli-> cd appliance_settin gs/boot_configuration hour = minute = second = time_zone (*) predefined zone = utc ( ) define name = acrony ...

  • Avocent ACS 6000 - page 57

    Chapter 3: CLI Appliance Sett ings Options 47 Appliance_Settings/Online Help Enter cd appliance_settings/onlin e_h elp to navigate to the online_help level. --:- units cli-> cd appliance_settin gs/online_help T o set the online help URL: Perform this procedure i f you have downloaded the online help files to a web server that is accessible to th ...

  • Avocent ACS 6000 - page 58

    48 Cyclades ACS 6000 Advanced Console Server Command Reference Guide ...

  • Avocent ACS 6000 - page 59

    49 CHAPTER 4 CLI Overview , Information, Active Sessions and Power Management Options This section provides procedures for some ta sks th at the administrator can perform at th e following levels of the CLI. Only administrators and authorized users can access the Information, Active Sessions and Power Management levels. Overview Options T o view an ...

  • Avocent ACS 6000 - page 60

    50 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Information Options T o view and perform Information options: 1. Log onto the CLI as an administrator and change to the informatio n level. --:- units cli-> cd information --:- information cli-> 2. Enter show to view the Information options --:- information cli-> show . s ...

  • Avocent ACS 6000 - page 61

    Chapter 4: CLI Overview, Informat ion, Active Sessions and Power Ma nagement Options 51 3. Enter cd < navigation option fr om list > to view any of the options. 4. Enter show to view the list of available parameters. This procedure continues d own th e hierarchical levels. See Table 4.3 for the options and and their default settings. T able 4 ...

  • Avocent ACS 6000 - page 62

    52 Cyclades ACS 6000 Advanced Console Server Command Reference Guide inactive Size: 83344 kB mapped Size: 14844 kB memfree Size: 1 19404 kB memtotal Size: 257436 kB nfs_unstable Size: 0 kB pagetables Size: 1000 kB slab Size: 5812 kB sreclaimable Size: 2572 kB sunreclaim Size: 3240 kB swapcached Size: 0 kB swapfree Size: 0 kB swaptotal Size: 0 kB vm ...

  • Avocent ACS 6000 - page 63

    Chapter 4: CLI Overview, Informat ion, Active Sessions and Power Ma nagement Options 53 Active Sessions Information The Active Session information fields are described in Table 4.4. An authorized user can kill an active session with th e Kill command. T o view and kill Active_Sessions: 1. From the units level CLI prompt, enter cd active_s essions . ...

  • Avocent ACS 6000 - page 64

    54 Cyclades ACS 6000 Advanced Console Server Command Reference Guide --:- active_sessions cli-> kill 37 Power Management Options The Power Management Op tions are described in Table 4.5 . T o rename a PDU: 1. Log onto the CLI as an administrator and enter cd power_management/settin gs to navigate to the settings level. --:- units cli-> cd pow ...

  • Avocent ACS 6000 - page 65

    55 Appendices Appendix A: Enabling Firmware Upgrades When the Boot Image is not in Flash T o enable firmware upgrades when the boot image is not in Flash : 1. Connect to the console of the console server as root. CLI 2.0 (2007-10-04T08:11-0700) --:- units cli-> 2. Enter shell . A warning appears followed by the root prompt. --:- units cli-> s ...

  • Avocent ACS 6000 - page 66

    56 Cyclades ACS 6000 Advanced Console Server Command Reference Guide Appendix B: T echnical Support Our Technical Support staff is ready to assist you with any installation or op erating issues you encounter with your Avocent produ ct. If an issue should develo p, follow the steps belo w for the fastest possible service. T o resolve an issue: 1. Ch ...

  • Avocent ACS 6000 - page 67

    57 INDEX Index A access options (CLI) 3 add command 7 Appliance Settings options 27 autocompletion 5 AUX/Modem port configure 19 enable 38 C CAS Profile 20 , 22 cd command 8 cleandbuf command 15 CLI utility access options 3 introduction 1 log in 3 navigation 4 command line syntax 6 command set 7 commit command 11 connect command 9 connect to a seri ...

  • Avocent ACS 6000 - page 68

    58 Cyclades ACS 6000 Advanced Console Server Command Reference Guide on command 12 opiepasswd command 13 outlet groups 54 Overview options 49 P parameters 6 passwd command 13 PC cards, configure 39 PDUs AUX/Modem port connection 2 manage power on outlets 19 manage power, procedure 24 ports for 1 power management and configurati on op tion s 54 powe ...

  • Avocent ACS 6000 - page 69

    FCC Warning Statement The Cyclades ACS advanced console server has been tested and found to comply with the limits for Class A digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment gener ...

  • Avocent ACS 6000 - page 70

    For T echnical Support : www.avocent.com/support 590- 7 70 -50 1B C yclades ® ACS 6000 Installation/Administration/User Guide ...

Manufacturer Avocent Category Network Card

Documents that we receive from a manufacturer of a Avocent ACS 6000 can be divided into several groups. They are, among others:
- Avocent technical drawings
- ACS 6000 manuals
- Avocent product data sheets
- information booklets
- or energy labels Avocent ACS 6000
All of them are important, but the most important information from the point of view of use of the device are in the user manual Avocent ACS 6000.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Avocent ACS 6000, service manual, brief instructions and user manuals Avocent ACS 6000. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Avocent ACS 6000.

Similar manuals

A complete manual for the device Avocent ACS 6000, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Avocent ACS 6000 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Avocent ACS 6000.

A complete Avocent manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Avocent ACS 6000 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Avocent ACS 6000, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Avocent ACS 6000, that we can find in the current document
3. Tips how to use the basic functions of the device Avocent ACS 6000 - which should help us in our first steps of using Avocent ACS 6000
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Avocent ACS 6000
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Avocent ACS 6000 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Avocent ACS 6000?

Use the form below

If you did not solve your problem by using a manual Avocent ACS 6000, ask a question using the form below. If a user had a similar problem with Avocent ACS 6000 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)