-
Planet Technology ICA-106 - page 1
IR IP Camera ICA-106 User’s Manual Version: 1.0 (May, 2006) 1/60 ...
-
Planet Technology ICA-106 - page 2
Copyright Copyright © 2006 by PLANET T echnology Co rp. All rights reserved. No p art of this pub lication may be reprod uced, transmitted, t ranscribed, store d in a retrieval system, or translated into any language or comput er language, in a ny form or by any mean s, electronic, m echanical, magnetic, optical, chem ical, manual or otherwise, wi ...
-
Planet Technology ICA-106 - page 3
Safety This equipment is designed with th e utmost care for the safety of those who install and u se it. However , special attentio n must be paid to the dange rs of el ectric shoc k and static elect ricity when working with electrical equipment. All guidelines of this and of the computer manu f acture must therefore be allowed at all times to ensu ...
-
Planet Technology ICA-106 - page 4
Table of Contents Chapter 1 Overview ........................................................................................................ 5 1.1 Introduction ................................................................................................... 5 1.2 Features: ......................................................................... ...
-
Planet Technology ICA-106 - page 5
Chapter 1 Overview This user’s guide explains how to operate t he Network Camera from a computer. This user’s guide is written to be read on the computer display. However, users might consider printing it out to access easily and read it before you operate the Network Camera. 1.1 Introduction This Network Camera is an inexpensive and fully scal ...
-
Planet Technology ICA-106 - page 6
1.3 Application: z Remote monitoring z Surveillance 1.4 System Requirement z Microsoft Internet Explorer 5.5 or later z VGA Monitor resolution 1024 x 768 z Pentium4 1.3GHz or above z Memory Size: 256MB or above z Windows ME, 2000, XP, or 2003 1.5 Package Content s User can find the following items in the package: 1. IR IP Camera x 1 2. Camera Stand ...
-
Planet Technology ICA-106 - page 7
Chapter2 Hardware Connections DC Power Jack LAN Socket and LEDs Factory Default Reset DC Power Jack The DC power input jack is located on the Network Camera’s bottom. The input power is 5VDC. Note that supply the power to the Network Camera with standard power adapter included in package. Otherwise, the improper power adapter may damage the unit ...
-
Planet Technology ICA-106 - page 8
S t atus LED Microphone Microphone The Network Camera’s has built-in an internal microphone. This microphone is also hidden in the pinhole located on the front panel. Status LEDs This LED is used to indicate the status of Network Camera. 8/60 ...
-
Planet Technology ICA-106 - page 9
2.1 Hardware Inst allation 1. Attach the Network Camera with the included stand 2. Place the Camera on the table or fix it onto ceiling or wall Use screws to fix the Network Camera onto the ceiling or wall. You could also put the Network Camera on the table directly. Fixed it by screws 3. Plug an Ethernet cable into the Network Camera Connect an Et ...
-
Planet Technology ICA-106 - page 10
Ethernet Cable 4. Connect the external power supply to Network Camera Connect the external power supply to the DC power jack of the Network Camera. Note : Use the power adapter, 5VDC, included in the package and connect it to wall outlet for AC power. Power Cable Once you have installed the Network Camera well and powered on, the status LED will tu ...
-
Planet Technology ICA-106 - page 11
Chapter3 Login to Homepage 3.1 Before Operation Install the IP Address of Network Camera When you installed your Network camera on your LAN environment, you may execute “MP4 IP Finder.exe” to discover Network camera’s IP address. “MP4 IP Finder.exe” is used to scan the Installed Network Camera on a LAN, setting the Network Camera Name, IP ...
-
Planet Technology ICA-106 - page 12
5. The Network Camera will rest art the system to validate the new settin g after seconds. Alternatively, user can use another approach to search out the Network Camera on the LAN by UPnP as bellow: 3.2 Enabling UPnP for W indows ® XP™ UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides compatibility am ...
-
Planet Technology ICA-106 - page 13
Click Add or Remove Programs Click Add/Remove Windows Components The following screen will appear: 13/60 ...
-
Planet Technology ICA-106 - page 14
Select Networking Services Click Details Select Universal Plug and Play Click Ok 14/60 ...
-
Planet Technology ICA-106 - page 15
Click Next Please wait while Setup configures the components. 15/60 ...
-
Planet Technology ICA-106 - page 16
Click Finish To view your Network Camera in an Internet browser, go to your Desktop and click My Network Places . Click My Networ k Place s Click the targeted Net work Camera 16/60 ...
-
Planet Technology ICA-106 - page 17
The last three digits (146), represent the fourth octet of your Network Camera’s IP address (in this example, 198.168.0.146). 3.3 Inst all the Camera with a Router The Network Camera can be used with a router. This section explains how to view the camera from either the Internet or from inside your LAN. If the Network Camera was installed on the ...
-
Planet Technology ICA-106 - page 18
(3) Open Virtual Server Ports to enable remote image viewing The firewall security features built into the most routers prevent users from accessing the video from the Network Camera over the Internet. The router connects to the Internet over a series of numbered ports. The ports normally used by the Network Camera are blocked from access over the ...
-
Planet Technology ICA-106 - page 19
3.4 Before connected via web browser The Network Camera web page communicates with the Network Camera using an ActiveX control. The ActiveX control component must be installed on your PC in advance. To download ActiveX control component, user must install the Liveplayer application program. Please refer to Liveplayer manual for detail. By now, you ...
-
Planet Technology ICA-106 - page 20
2. Type in your login name and password under “USERNAME” and “PASSWORD” textbox. For the first time use (default value), input the User Name: admin Password: admin That’s, type in “ admin” on the “User Name” as a def ault name and “ admin ” on “Password”. Click “OK” button to start the main menu. Now, you login to the ...
-
Planet Technology ICA-106 - page 21
The second one is a user with “config” privilege. The “config” user can view the video and or audio streaming. Also user can change the settings in the “Home” and “Setting” pages except “user” and “Factory Default” options. Furthermore, “Capture” and “Recording” will be not available. 3.7 Logging in as an Administrat ...
-
Planet Technology ICA-106 - page 22
Chapter 4 Operating the Network Camera Start-up screen will be as follow no matter an ordinary users or an administrator. Vi e w i n g A r e a Advanced Function Contr ol Panel Viewing Area: Images from the Network Camera Scale UP: Click this button to scale up the image on the screen Scale Down: Click this button to scale down the image on the scre ...
-
Planet Technology ICA-106 - page 23
4.1 Control Panel Control Panel Area : Network Camera Manipulation and picture quality control Item Button Meaning 1 Quality Adjust video quality. High: Video is better but frame rate may be slower Low: Video is poor but frame rate may be higher Normal: System default value 2 Max Frame Rate Adjust the frame rate of video stream 3 Exposure Choose au ...
-
Planet Technology ICA-106 - page 24
6 Contrast Adjust picture contrast of camera 7 Camera position - Desktop - Ceiling - Mirror 8 Zoom Adjust ratio of digital zo om in 9 IR Turn on or off the built-in IR LEDS. Or you can set a schedule to let the IR on/off. Note : Select “OK” to save and enable the setting. 24/60 ...
-
Planet Technology ICA-106 - page 25
4.2 Advanced Function Area Advanced function area : only available for administrator . It has contained four categories. Home The home page of the Network Camera. Setting System Configuration Capture Capture current screen and save to HDD or other media Recording Record current video stream and save to HDD or other media Setting menu consists of so ...
-
Planet Technology ICA-106 - page 26
4.2.2 Setting Setting Symbol Item Action System Define camera name. Set time and date of the Network Camera. Enable/disable NTP function. System power on notification. Network Configure Network setting such as DHCP On/Off, DDNS and UPnP. Video/Audio Adjust camera parameters and video / audio settings. User Setup user name, password and login privil ...
-
Planet Technology ICA-106 - page 27
4.2.2.1 System : Define system parameters, NTP, and notification System Settings: - Device Name: It’s a unique number for each Network Camera for identification. - Description: You can enter the name of this unit here. It’s very useful to identify the specific device from multiple units. Note that use “_” or “-“ to replace “space” c ...
-
Planet Technology ICA-106 - page 28
- Time: Change the time according to the “hh:mm” and by 12 hours format. - Date: Change the date according to the “mm/dd/yyyy” fo rmat - Time zone: Select the time zone setting accordingly. NTP: - Time Server: Choose “enable” will get the time for NTP server periodically. - Server Address: Key in the IP address of NTP server. - Update S ...
-
Planet Technology ICA-106 - page 29
Network : Configure Network setting such as DHCP On/Off, DDNS and UPnP IP Setting: - DHCP: DHCP: Stands for Dynamic Host Configuration Protocol. The Network Camera will be assigned an IP address and related information by DHCP server while “ DHCP ON ”. Otherwise, user needs to specify IP address and related information to the Network Camera man ...
-
Planet Technology ICA-106 - page 30
DDNS: Stands for Dynamic Domain Name Server The Network Camera supports DDNS. DDNS allows the Network Camera to use an easier way to remember naming format rather than an IP address. The name of the domain is like the name of a person, and the IP address is like his phone number. On the Internet we have IP numbers for each host (computer, server, r ...
-
Planet Technology ICA-106 - page 31
can be disabled by clicking “ Disable ” option. HTTP Port : The Network Camera supports two HTTP ports. The first one is default port 80 and this is one is fixed. This port is very useful for Intranet usage. The other HTTP port is setting able. Users could assign the port number of http protocol, and the WAN users should follow the port number ...
-
Planet Technology ICA-106 - page 32
4.2.2.3 V ideo/Audio : Adjust Camera parameters Video / Audio Setting: - Resolution: The Network Camera supports 5 kind resolutions: • 128x96 32/60 ...
-
Planet Technology ICA-106 - page 33
• 176x144 • 160x120 • 320x240 • 640x480 - Power line frequency: User should choose either 50 or 60 Hz to meet the power line frequency in your country. - Quality: There are two modes of video quality. User can adjust t he video quality by either bit-rare control or compression ratio: • Bit-rate control: from 32kbps to 1024kbps • Compres ...
-
Planet Technology ICA-106 - page 34
Hold: will fix the internal gain. - Brightness: Large value will brighten Camera. - White Balance: Auto: will adjust the white balance automatically. Hold: will fix the white balance. - Contrast: Large value will contrast Camera heavily. - Camera Position: There are three options: Desktop, Ceiling and Mirror. - Zoom: The Camera supports smoothly di ...
-
Planet Technology ICA-106 - page 35
User : Setup user name, password and login privilege There are 3 levels of privilege supported in the Network Camera: • Admin: This account can do anything in the Network Camera. • Config: This account can set some parameters of Network Camera. • View: This account can only view the video stream from the Network Cmaera. User only can change o ...
-
Planet Technology ICA-106 - page 36
Motion Detection : Setup motion detection and sensor sensitivity The motion detection is implemented by a patented software algorithm, it runs on the Network Camera, due to a larger processing power of motion dete ction, the overall performance of Network Camera will be degraded; the frame rate may be reduced. 36/60 ...
-
Planet Technology ICA-106 - page 37
You can enable or disable motion detection function. If you enable motion detection , you can also setup detection sensitivity from one of five sensitivit y levels. When alarm was enabled, user can send the captured images to the pre-set E-Mail or FTP server . Alert: - Enable: You can enable or disable motion detection function. - Detect Method: If ...
-
Planet Technology ICA-106 - page 38
Type the user name for the FTP server. - Password: Type the password for the FTP server. Select “OK” to save and enable the setting. 4.2.2.6 S tatus : System information, status and log Status: User can find out a lot of information about t he system such as MAC address, IP address, firmware version, and so on. User also can get the number of c ...
-
Planet Technology ICA-106 - page 39
4.2.2.7 Factory Default : Recall the Network Camera factory default setting The “Factory Default” button will restore to the factory default configuration, all information changed and saved on the flash will be lost, and restore to the factory default setting. Y ou will be prompt before restore to factory default setting. Select “Factory Defa ...
-
Planet Technology ICA-106 - page 40
The “Reboot” button will reboot the Network Camera. It’s useful while the Network Camera got problem. Y ou will be prompt before restart the Network Camera. Select “Restart” to continue. The Network Camera will reboot and be connectable again after 20~30 seconds. 4.2.1.9 Upgrade : The Network Camera supports firmware upgrades online. Plea ...
-
Planet Technology ICA-106 - page 41
4. Select “Upgrade” 5. Link to the Firmware Upgrade menu as below: 6. Select the Firmware binary file. (It must be make sure that the Firmware only apply to the Network Camera, once update, it will be burned into FLASH ROM of system.) 7. Once the firmware file has been selected, select “Upgrade” button to st art it. The upgrade progress sta ...
-
Planet Technology ICA-106 - page 42
power and/or network connection are broken during the download procedure, it might possibly cause serious damage to the Network Camera. Suggest that do not upgrade firmware via Wireless LAN due to high error rate possibly . Please be aware that you should not turn off the power during updating the firmware and wait for finish message. Once the upgr ...
-
Planet Technology ICA-106 - page 43
4.3 Capture You can capture current image and save it to storage media. The image is saved in the Bitmap format. Click the “Capture” button to save the current display image into the local PC If you like to retrieve the saved image, sele ct the file to display it by using any one of graph editing tools. Note: This function is available for logg ...
-
Planet Technology ICA-106 - page 44
4.4 Recording You can record the current video stream to storage media. The recorded file is saved in the ASF format. Press the “Recording” button to start video recording. After the “Recording” button pressed, it will be come , you can press this button to stop video recording. After the stop recording, list the f ile on the selected saved ...
-
Planet Technology ICA-106 - page 45
Appendix A: Restore Factory Default Settings There is a switch hidden in the pinhole under the bottom of Network Camera. It is used to restore the factory default settings. While the Network Camera got problem, sometimes, restarting the Network Camera will make the system back to a normal state. In case the system still got problems after reset, us ...
-
Planet Technology ICA-106 - page 46
Appendix B: T roubleshooting & Frequently Asked Questions Question Answer or Resolution Features The video and audio codec is adopted in the Network Camera. The Network Camera utilizes MPEG4 and JPEG dual compression to providing high quality images. MPEG4 is a standard for video compression and JPEG is a standard for image compression. The aud ...
-
Planet Technology ICA-106 - page 47
the Network Camera. Finder.exe program. MP4 IP Finder.exe program cannot find Network Camera. • Re power the Network Camera if cannot find the unit within 1 minutes. • Do not connect Network Camera over a router. MP4 IP Finder.exe program cannot detect Network Camera over a router. • If IP address is not assigned to the PC which running MP4 I ...
-
Planet Technology ICA-106 - page 48
router's manual for details. • Packet Filtering of the router may prohibit access from an external network. Refer to your router's manual for details. • Access Network Camera from the Internet with the global IP address of the router and port number of Network Camera. • Some routers reject the global IP address to access Network Cam ...
-
Planet Technology ICA-106 - page 49
e-mail or FTP does not work. correctly. • If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. Video Quality of Network Camera The focus on the Network Camera is bad. • The lens is dirty or dust is attached. Clean the lens with lens cleaner. Or adjust the camera focus manually. • The ...
-
Planet Technology ICA-106 - page 50
Appendix C: PING IP Address The PING (stands for Packet Internet Groper) command is used to detect whether a specific IP address is accessib le by sending a packet to the specific address and waiting for a reply. It’s also a very useful tool to confirm Network Camera installed or if th e IP address conflicts with any other devices over the networ ...
-
Planet Technology ICA-106 - page 51
Appendix D: Bandwidth Estimation The frame rate of video transmitted from the Network Camera depends on connection bandwidth between client and server, video resolution, and quality setting of server. Here is a guideline to help you roughly estimate the bandwidth requirements form your Network Camera. The required bandwidth depends on content of vi ...
-
Planet Technology ICA-106 - page 52
Appendix E: Specifications Model Network Camera Control Interface Internet Explorer or Multi-channel software player Operating Humidity 10% ~ 80% Operating Temperature 5°C to 40°C Power Consumption 4W max. (W LAN model and IR LEDs on) Power Supply 5V DC ± 10% Dimension Main body: 100*62mm (DXH) Camera Module Image Pick-up Device 1/4“ Micron CM ...
-
Planet Technology ICA-106 - page 53
Operating System eCos Type Of IP Address Needed Statistic or Dynamic Notification Email, FTP Firmware Upgrade Via Ethernet Security 3 Levels Viewer Microsoft® Internet Explorer 5.5 or later Digital zoom 400% (Maximum) Networking Protocol TCP/IP, HT TP, SMTP, FTP, NTP, DNS, DDNS, ARP and DHCP, UPnP 53/60 ...
-
Planet Technology ICA-106 - page 54
Appendix F: T ime Zone T able GMT stands for Greenwich Mean Time which is the global time that all time zones are measured from. 54/60 ...
-
Planet Technology ICA-106 - page 55
55/60 ...
-
Planet Technology ICA-106 - page 56
Appendix G: DDNS Application 1. Preface If you have a Cable modem, xDSL, ISDN or Di alup, this is a great way to host your own Network Camera. Get your own domain like www.yourname.com*, www.yourname.com.tw* etc. (Note: This dom ain must be registered via registration authorities such as Network Solutions, Dire ctNIC, Register.com etc). Your domain ...
-
Planet Technology ICA-106 - page 57
(3). After the columns show up at the lef t side, click “ Create Account ”. (4). Fill the application agreement and necessary information. a. Input Name b. E-mail input and confirmation c. Password input and confirmation d. Submit all the input information and finish creating a accou nt 57/60 ...
-
Planet Technology ICA-106 - page 58
(5). Check your e-mail mailbox. There will be an e-mail with a title “Y our DynDNS.org Account Information “. C lick the hyperlink address to confirm the DDNS service that you just applied. Then DDNS you applied activated. 58/60 ...
-
Planet Technology ICA-106 - page 59
(6). Enter the web page http://www .dyndns.org/ again. Input your username and password that you just applied to login administration interface of DDNS service. (7). If the correct username and password are in put, you can se e the following picture at the top-right of the login page. (8). Click the “ Service s”. (9). Click the “ Dynam i c DN ...
-
Planet Technology ICA-106 - page 60
(10). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember . (Pink No.2) Finally , click the “Add Host” to submit the domain name information. (Pink No.3) 4. Setup the DDNS At last, users have to enter the web page of Network Camera and setup the ...
Do you have a question concerning Planet Technology ICA-106?
Use the form below
If you did not solve your problem by using a manual Planet Technology ICA-106, ask a question using the form below. If a user had a similar problem with Planet Technology ICA-106 it is likely that he will want to share the way to solve it.