English dropdown-ico

Manual Regency CS1200

32 pages 1.39 mb
Download

Go to site of 32

Summary
  • Regency CS1200 - page 1

    FPI FIREPLACE PRODUCTS INTERNA TIONAL L TD. 6988 V enture St., Delta, BC Canada, V4G 1H4 918-896 CS1200 Alterra™ Freestanding W ood Sto ve 07/05/10 Owner's & Installation Manual T ested by: Installer : Please complete the details on the back cover and leave this manual with the homeowner . Homeowner: Please keep these instructions for fu ...

  • Regency CS1200 - page 2

    Regency CS1200 Wood Cast Insert 2 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT . The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area. Keep those REGENCY ...

  • Regency CS1200 - page 3

    Regency CS1200 F reestanding W ood Stov e 3 SAFETY LABEL This is a copy of the label that accompanies each CS1200 Wood Stove . W e have printed a copy of the contents here for your review . HOT WHILE IN OPERA TION DO NOT TOUCH. KEEP CHILDREN, CLOTHING AND FURNITURE A W A Y . CONT ACT MA Y CAUSE SKIN BURNS. READ NAMEPLA TE AND INSTRUCTIONS. DO NOT R ...

  • Regency CS1200 - page 4

    4 Regency CS1200 F reestanding W ood Stov e T ABLE OF CONTENTS SAFETY LABEL Copy of the Safety Label ............................................... 3 DIMENSIONS Unit Dimensions ............................................................ 5 INST ALLA TION Residential Installation................................................... 6 Room Air ....... ...

  • Regency CS1200 - page 5

    Regency CS1200 F reestanding W ood Stov e 5 DIMENSIONS UNIT DIMENSIONS 9-15/16 ” 14-7/16 ” 39-9/16 ”( 1 1 0 5 m m ) 17-1/8” (436mm) 26-3/4”(680mm) A A 21-3/4” (552mm) 37-13/16” (961mm) 19-1/16” (485mm) (250mm) (367mm) 17-1/8” (436mm) 27-1/8” (689mm) 9-15/16” (250mm) 7-5/16” (186mm) 17-1/8” (435mm) CL for outside ai r 6&quo ...

  • Regency CS1200 - page 6

    6 Regency CS1200 F reestanding W ood Stov e INST ALLA TION RESIDENTIAL INST ALLA TION 1) Read all instructions before installing your Re- gency Stove. Install and use only in accordance with these installation and operating instructions. Be aware that local Codes and Regulations may override some items in this manual. Check with your local inspecto ...

  • Regency CS1200 - page 7

    Regency CS1200 F reestanding W ood Stov e 7 INST ALLA TION MINIMUM CLEARANCE T O COMBUSTIBLE MA TERIALS MEASUREMENTS "FROM UNIT" ARE FROM THE SIDE SHIELDS OF THE STOVE T O A SIDE W ALL OR T O A CORNER, AND FROM THE REAR HEA T SHIELD TO A BACK W ALL NO TE: Be a ware that local Codes and Regulations may o verride some clearances listed in t ...

  • Regency CS1200 - page 8

    8 Regency CS1200 F reestanding W ood Stov e INST ALLA TION Z 6" 6" 16" Y Y X X 6" for angled corners 6" 16" 6" 6" Z The Regency Freestanding models have been alcove approved and must be installed with a listed double wall connector to the ceiling level. Note: Minimum alcove ceiling height - 84" Maximum d ...

  • Regency CS1200 - page 9

    Regency CS1200 F reestanding W ood Stov e 9 INST ALLA TION Horizontal Installation Standard Ceiling Installation 8) T o complete your chimney installation, install the double wall connector pipe from the stove’s fl ue collar to the chimney support device. 9) If you are using a horizontal connector , the chimney connector should be as high as pos ...

  • Regency CS1200 - page 10

    10 Regency CS1200 F reestanding W ood Stov e INST ALLA TION F ACTOR Y BUIL T CHIMNEY When a metal prefabricated chimney is used, the manufacturer's installation instructions must be followed. Y ou must also purchase and install the ceiling support package or wall pass-through and "T" section package, fi restops (where needed), insul ...

  • Regency CS1200 - page 11

    Regency CS1200 F reestanding W ood Stov e 11 INST ALLA TION Method A : 12" (304.8 mm) Clearance to Combustible W all Member: Using a minimum thickness 3.5" (89 mm) brick and a 5/8" (15.9 mm) minimum wall thickness clay liner , construct a wall pass-through. The clay liner must conform to ASTM C315 (Standard Speci fi cation for Clay ...

  • Regency CS1200 - page 12

    12 Regency CS1200 F reestanding W ood Stov e INST ALLA TION MINIMUM RECOMMENDED FLUE HEIGHTS IN FEET (Measured from the top of the unit) # OF ELBOWS ELEV A TION (FT) ABOVE SEA LEVEL 0 2 x 15 o 4 x 15 o 2 x 30 o 4 x 30 o 2 x 45 o 4 x 45 o 0-1000 12.0 13.0 14.0 15.0 18.0 16.0 20.0 1000-2000 12.5 13.5 14.5 15.5 19.0 16.5 21.0 2000-3000 13.0 14.0 15.0 ...

  • Regency CS1200 - page 13

    Regency CS1200 F reestanding W ood Stov e 13 INST ALLA TION MOBILE HOME INST ALLA TION W ARNING: Minimum height requirements must be met. Safe removal of the chimney system must be adhered to when transporting the mobile home. W ARNING: Operate only with door fully closed - open feed door to feed fi re only . Once you have properly marked the posi ...

  • Regency CS1200 - page 14

    14 Regency CS1200 F reestanding W ood Stov e INST ALLA TION SIMPSON DURA-PLUS Qty .Part # Description 1 6DVL8693 Connector Kit 1 6DP-MH9096 Mobile Home Kit ICC EXCEL 2100 Qty .Part # Description 1 6CL48 48" Chimney length (also in 12",18", 24" lengths. 1 6RC Rain Cap 1 6RCS Spark Screen (for rain cap) 1 6RDS/SQS Round/Square sup ...

  • Regency CS1200 - page 15

    Regency CS1200 F reestanding W ood Stov e 15 INST ALLA TION Side View Front View Front View 1) If the two air tubes are installed continue on to Step 2), if not, follow the instructions below . Install the air tube into the holes in the side channels. The notch goes on the right hand side with the air holes facing toward the door . Slide the tube i ...

  • Regency CS1200 - page 16

    16 Regency CS1200 F reestanding W ood Stov e INST ALLA TION SIDE P ANEL INST ALLA TION Before installation, panels must be handled and cleaned as per instructions noted below: Stainless Steel Panels • Stainless panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time. Claims for damage after ...

  • Regency CS1200 - page 17

    Regency CS1200 F reestanding W ood Stov e 17 INST ALLA TION ASH DRA WER OPTION 2) Remove the bricks from the fl oor of the fi rebox. 5) Position ash drawer lid in 'Open' position on the ash drawer lid (towards the front) as shown below . 6) Slide in ash drawer . 7) Close center door and main top door- once ash drawer is in place. Keep a ...

  • Regency CS1200 - page 18

    18 Regency CS1200 F reestanding W ood Stov e INST ALLA TION LOWER SURROUND DOOR REVERSAL (LEFT TO RIGHT SIDE OPENING) 1) The lower surround door can be reversed - to open from the right. Make sure stove has cooled, open the door - and remove it from the hinge by removing 2 bolts. 2) Remove and discard the latch on the left side of the unit by remov ...

  • Regency CS1200 - page 19

    Regency CS1200 F reestanding W ood Stov e 19 INST ALLA TION CAST DOOR REVERSAL (LEFT TO RIGHT SIDE OPENING) 1) The door can be reversed - so that it will open to the left. Make sure stove has cooled to room temperature. Open the door to about 45 ° - then remove it from the hinge by lifting up and out. Note: Door is heavy . 2) Remove the 2 bolts se ...

  • Regency CS1200 - page 20

    20 Regency CS1200 F reestanding W ood Stov e INST ALLA TION OPTIONAL ASHLIP INST ALLA TION WOOD ST ORAGE When storing wood within pedestal- ensure wood does not protrude past door opening. Do not store newspaper within pedestal. Note: Please refer to local codes. (B365, NFP A 21 1) and your local jurisdiction. Store wood behind door opening 1) Open ...

  • Regency CS1200 - page 21

    Regency CS1200 F reestanding W ood Stov e 21 INST ALLA TION 1) Remove the fi ve screws from the back panel of the unit - to remove the fan cover plate. 2) Slide the fan up into the rear heat shield. 3) After aligning holes, secure the fan to the rear heat shield using the fi ve screws removed earlier . 4) Secure the bottom of the fan using the tw ...

  • Regency CS1200 - page 22

    22 Regency CS1200 F reestanding W ood Stov e 22 OPERA TING INSTRUCTIONS 8) Do not place anything on the stove top during the curing process. This may result in damage to your paint fi nish. 9) During the fi rst few days it may be more dif fi cult to start the fi re. As you dry out your fi rebrick and your masonry fl ue, your draft will increa ...

  • Regency CS1200 - page 23

    Regency CS1200 F reestanding W ood Stov e 23 OPERA TING INSTRUCTIONS ASH DISPOSAL During constant use, ashes should be removed every few days. The Ash Drawer option features a convenient ash dump for easy removal of ash, refer to the "Modular Options" section. Safety Precautions 1) Do not allow ashes to build up to the loading doors! Only ...

  • Regency CS1200 - page 24

    24 Regency CS1200 F reestanding W ood Stov e MAINTENANCE SAFETY GUIDELINES AND W ARNINGS 1) Never use gasoline, gasoline type lantern fuels, kerosene, charcoal lighter fuel, or similar liquids to start or ‘freshen up’ a fi re in your heater . Keep all such liquids well away from the heater while it is in use. 2) Keep the door closed during ope ...

  • Regency CS1200 - page 25

    Regency CS1200 F reestanding W ood Stov e 25 MAINTENANCE CREOSOTE When wood is burned slowly , it produces tar and other organic vapors, which when combined with moisture, form creosote. The creosote vapors condense in the relatively cool chimney fl ue of a slow burning fi re. As a result, creosote residue accumulates on the fl ue lining. When i ...

  • Regency CS1200 - page 26

    26 Regency CS1200 F reestanding W ood Stov e P AR TS LIST 1 6 13 14 11 3 2 9 4 5 10 7 8 12 Part # Description 1) 076-201 Cast Stove T op 2) 076-21 1 Cast Pedestal 3) 156-21 1 Surround Bottom 4) 156-513 Curved Door Assembly 5) 156-261 Thin Surround 6) 076-921 Side Shield (Black Set) 076-927 Side Shield (Stainless Set) 7) 156-519 Door Catch Assembly ...

  • Regency CS1200 - page 27

    Regency CS1200 F reestanding W ood Stov e 27 P AR TS LIST Part # Description 200-917 Fan Assembly Package 1) 220-026 Fan Housing Front 2) 222-022 Fan Housing Bottom 3) 222-036 Sensor Mount 4) 200-227 Fan Bracket Right Hand 5) 200-228 Fan Bracket Left Hand 6) 200-229 Fan Housing Back 7) 910-157/P Fan 8) 910-142 Thermodisc Part # Description 1) 073-9 ...

  • Regency CS1200 - page 28

    28 Regency CS1200 F reestanding W ood Stov e NO TES ...

  • Regency CS1200 - page 29

    Regency CS1200 F reestanding W ood Stov e 29 NO TES ...

  • Regency CS1200 - page 30

    30 Regency CS1200 F reestanding W ood Stov e NO TES ...

  • Regency CS1200 - page 31

    Regency CS1200 F reestanding W ood Stov e 31 W ARRANTY Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance T e am carefully inspects each unit thoroughly before it leaves our door . FPI Fireplace Products International Ltd. is pleased to extend this limited lifetime warranty t ...

  • Regency CS1200 - page 32

    32 Regency CS1200 F reestanding W ood Stov e 32 Installer: Please complete the following information Dealer Name & Address: ______________________________________________ ___________________________________________________________________ Installer: ___________________________________________________________ Phone #: ___________________________ ...

Manufacturer Regency Category Stove

Documents that we receive from a manufacturer of a Regency CS1200 can be divided into several groups. They are, among others:
- Regency technical drawings
- CS1200 manuals
- Regency product data sheets
- information booklets
- or energy labels Regency CS1200
All of them are important, but the most important information from the point of view of use of the device are in the user manual Regency CS1200.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Regency CS1200, service manual, brief instructions and user manuals Regency CS1200. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Regency CS1200.

Similar manuals

A complete manual for the device Regency CS1200, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Regency CS1200 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Regency CS1200.

A complete Regency manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Regency CS1200 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Regency CS1200, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Regency CS1200, that we can find in the current document
3. Tips how to use the basic functions of the device Regency CS1200 - which should help us in our first steps of using Regency CS1200
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Regency CS1200
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Regency CS1200 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Regency CS1200?

Use the form below

If you did not solve your problem by using a manual Regency CS1200, ask a question using the form below. If a user had a similar problem with Regency CS1200 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)