English dropdown-ico

Manual Harbor Freight Tools 98751

18 pages 0.93 mb
Download

Go to site of 18

Summary
  • Harbor Freight Tools 98751 - page 1

    3-IN-1 AIR FRAMING NAILER 98751 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork containe ...

  • Harbor Freight Tools 98751 - page 2

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if produc ...

  • Harbor Freight Tools 98751 - page 3

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. Personal safety a. Stay alert. Watch what you are do- ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion. A momen ...

  • Harbor Freight Tools 98751 - page 4

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 4 cleat nails or staples into surfaces too hard to penetrate. Do not drive cleat nails or staples on top of other cleat nails or staples, or at too steep an angle. Cleat nails and staples can ricochet, causing personal injury . Never re this tool into the air or point it toward ...

  • Harbor Freight Tools 98751 - page 5

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 5 the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. b. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to pers ...

  • Harbor Freight Tools 98751 - page 6

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 6 particles. (California Health & Safety Code § 25249.5, et seq. ) 3. T ake caution, as some woods contain preservatives such as copper chro- mium arsenate (CCA) which can be toxic. When nailing these materials, extra care should be taken to avoid inhalation and minimize skin ...

  • Harbor Freight Tools 98751 - page 7

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 7 FUNCTIONAL DESCRIPTION Specications Air Pressure Range 70-120 PSI Maximum Air Pressure 120 PSI Air Inlet 1/4” -18 NPT Nail T ype / Length .1 13”-.131” Shank Clipped or Full Head Nails 2” to 3-1/2” Length Magazine Capacity 21° - 60 Nails 28°/34° - 100 Nails Air Con ...

  • Harbor Freight Tools 98751 - page 8

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 8 Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Regulator Adjusts air pressure to tool D Lubricator (optional) For air tool lubrication E Coupler and Plug Provides each connections F Leader Hose (opti ...

  • Harbor Freight Tools 98751 - page 9

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 9 Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts Secures air compressor in place C Ball V alve Isolates sections of system for maintenance D Isolation Hose For vibration reduction E Main Air Line - 3/4” minimum recommended Distributes air t ...

  • Harbor Freight Tools 98751 - page 10

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 10 an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air ow , and therefore tool perfor - mance, can be hindered by under- sized air supply components. 3. The air hose must be long enough to reach th ...

  • Harbor Freight Tools 98751 - page 11

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 1 1 3. Safety Nosepiece (42) Magazine (79) T rigger (59) Air Coupler (95) Figure 1 The Nailer should not re if Safety Nosepiece (42) is not depressed against the workpiece. 4. Make sure T rigger (59) and Safety Nosepiece (42) move freely , with- out sticking. Do not use nailer i ...

  • Harbor Freight Tools 98751 - page 12

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 12 of nails into the Magazine behind the few remaining nails and the Nailer will be ready for further use. Operating Nailer Set proper angle of the Nailer for your application (a three step process): Failure to properly adjust the nailer can result in tool failure or damage. 1. Ang ...

  • Harbor Freight Tools 98751 - page 13

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 13 3. T o re, place the Safety Nosepiece of the Nailer on the workpiece. The Nailer should not re if the Safety Nosepiece is not depressed. Once depressed, quickly squeeze the T rigger once. Do not re repeat - edly; nails could bounce off of one another causing injury . We ...

  • Harbor Freight Tools 98751 - page 14

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 14 force . Keep your ngers clear when releasing. 5. If you are unable to clear the nail jam using the method prescribed above, the tool should be taken to a qualied service technician for proper servicing. User-Maintenance Instructions Procedures not specically explained i ...

  • Harbor Freight Tools 98751 - page 15

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 15 T roubleshooting Problem Possible Causes Likely Solutions Air leaking in Cylinder Cap (8). 1. Loose Screw (6). 2. Gasket (9) is cracked or worn. 1. T ighten and recheck. 2. Replace Gasket. Lack of power . Slow to cycle. Low power when shooting and returning. 1. T ool is too dry ...

  • Harbor Freight Tools 98751 - page 16

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 16 P ARTS LIST Part Description Quantity 1 Screw 1 2 Spring W asher 3 3 Bushing 1 4 Exhaust Cover 1 5 Seal 1 6 Screw 3 7 Spring W asher 2 8A Cylinder Cap 1 9A O-Ring sealing 3 10 W asher 3 11 V alve Seat 1 12 Spring 2 13 O-Ring (M57.5 x 3.6) 1 14 O-Ring (M72.4 x 3.5) 2 15 V alve 1 ...

  • Harbor Freight Tools 98751 - page 17

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 17 REV 10a 28 29 30 31 32 33 34 35 36 37 38 39 40 39 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 54 57 58 59 60 61 68 67 39 69 66 64 63 65 63 70 71 63 12 73 74 75 64 76 77 63 64 63 62 78 79 80 81 82 83 2 84 85 6 86 6 83 2 82 87 88 89 90 63 62 7 91 92 93 94 95 16 Some parts are ...

  • Harbor Freight Tools 98751 - page 18

    SKU 98751 For technical questions, please call 1-800-444-3353. Page 18 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. REV 10a 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 90 Day W arranty Harbor Freight T ools Co. makes every effort to ...

Manufacturer Harbor Freight Tools Category Nail Gun

Documents that we receive from a manufacturer of a Harbor Freight Tools 98751 can be divided into several groups. They are, among others:
- Harbor Freight Tools technical drawings
- 98751 manuals
- Harbor Freight Tools product data sheets
- information booklets
- or energy labels Harbor Freight Tools 98751
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harbor Freight Tools 98751.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harbor Freight Tools 98751, service manual, brief instructions and user manuals Harbor Freight Tools 98751. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harbor Freight Tools 98751.

Similar manuals

A complete manual for the device Harbor Freight Tools 98751, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harbor Freight Tools 98751 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harbor Freight Tools 98751.

A complete Harbor Freight Tools manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harbor Freight Tools 98751 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harbor Freight Tools 98751, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harbor Freight Tools 98751, that we can find in the current document
3. Tips how to use the basic functions of the device Harbor Freight Tools 98751 - which should help us in our first steps of using Harbor Freight Tools 98751
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harbor Freight Tools 98751
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harbor Freight Tools 98751 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harbor Freight Tools 98751?

Use the form below

If you did not solve your problem by using a manual Harbor Freight Tools 98751, ask a question using the form below. If a user had a similar problem with Harbor Freight Tools 98751 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)