-
Simplicity Cobalt 2690479 - page 1
5100724 Re vision B Re v . Date: 04/2009 TP 100-7293-B-CB-S 27HP Zero-T urn Riders Mfg. No. Description 2690479 Simplicity 27HP Cobalt Zero-T urn Rider with 61” Mow er Cobalt Series OPERA T OR’S MANU AL Not for Reproduction ...
-
Simplicity Cobalt 2690479 - page 2
Thank y ou f or purchasing this quality-b uilt Simplicity product. W e’ re pleased that y ou’v e placed y our confidence in the Simplicity brand. When operated and maintained according to the instructions in this manual, your Simplicity product will provide man y y ears of dependab le service. This manual contains saf ety inf or mation to mak e ...
-
Simplicity Cobalt 2690479 - page 3
1 Safety Rules & Inf ormation ................................2 Identification Numbers .....................................11 Safety Decals .....................................................12 Safety Icons & Interloc k System......................13 Features & Controls ..........................................14 Control Functions . ...
-
Simplicity Cobalt 2690479 - page 4
2 www .simplicitymfg.com Safety Safety Rules and Information Operating Safety Congratulations on purchasing a superior-quality piece of la wn and garden equipment. Our products are designed and manuf actured to meet or e xceed all industry standards for saf ety . Do not operate this machine unless y ou hav e been trained. Reading and understanding ...
-
Simplicity Cobalt 2690479 - page 5
3 Safety Safety Rules and Information Slope Operation Operation on slopes can be dangerous . Using the unit on a slope that is too steep where you do not ha v e adequate wheel traction (and control) can cause sliding, loss of steering, control, and possible rollo v er . Y ou should not operate on a slope greater than a 5.4 f oot rise ov er a 20 f o ...
-
Simplicity Cobalt 2690479 - page 6
4 www .simplicitymfg.com Safety Safety Rules and Information Roll Bar Use K eep the roll bar in the raised position and f asten the seat belt. There is no roll ov er protection when the roll bar is down! Do not jump off if the mo wer tips (it is saf er to be secured by the seat belt with the roll bar raised.) Low er the roll bar only when necessar ...
-
Simplicity Cobalt 2690479 - page 7
5 Safety Safety Rules and Information Enclosed Areas Only operate this unit outdoors and aw a y from un v entilated areas such as inside garages or enclosed trailers . The engine emits poisonous carbon mono xide gas and prolonged e xposure in an enclosed area can result in serious injur y or death. Fuel and Maintenance Alwa ys disengage all driv es ...
-
Simplicity Cobalt 2690479 - page 8
www .simplicitymfg.com Safety 6 Read these saf ety rules and follo w them closely . F ailure to obey these rules could result in loss of control of unit, se v ere personal injur y or death to y ou, or bystanders , or damage to proper ty or equipment. This mo wing dec k is capab le of amputating hands and f eet and thr o wing objects. The triangle i ...
-
Simplicity Cobalt 2690479 - page 9
Safety 7 T O WED EQUIPMENT (RIDE-ON UNITS) 1. T ow only with a machine that has a hitch designed f or towing. Do not attach towed equipment e xcept at the hitch point. 2. Follow the man uf acturer’ s recommendations for weight limit f or to wed equipment and to wing on slopes. See attaching a trailer under OPERA TION. 3. Nev er allow children or ...
-
Simplicity Cobalt 2690479 - page 10
8 www .simplicitymfg.com Safety Safety Rules and Information SER VICE AND MAINTENANCE Safe Handling of Gasoline 1. Extinguish all cigarettes, cigars, pipes, and other sources of ignition. 2. Use only approved gasoline containers . 3. Nev er remov e the gas cap or add fuel with the engine running. Allow the engine to cool bef ore refueling. 4. Nev e ...
-
Simplicity Cobalt 2690479 - page 11
9 Safety Safety Rules & Information ROLL B AR INSTRUCTIONS F or models equipped with f actory-installed Roll Over Protection System (ROPS). OPERA TIONAL W ARNINGS • Always use the seat belt when the roll bar is in the raised position. • Nev er use the seat belt when the roll bar is in the down position. • Remember there is no roll over pr ...
-
Simplicity Cobalt 2690479 - page 12
10 www .simplicitymfg.com Safety INSPECT BUCKLE & LA TCH INSPECT WEBBING Safety Rules & Information W ARNING Failure to pr operl y inspect and maintain the seat belt can cause serious injury or death. INSPECTION AND MAINTENANCE OF THE ROLL B AR SEA T BEL T • The seat belt like the ROLL BAR, needs to be periodically inspected to verify tha ...
-
Simplicity Cobalt 2690479 - page 13
Safety Identification Numbers Identification Numbers Identification Ta g 11 When contacting y our authorized dealer for replacement parts, service, or information y ou MUST have these number s. Record your model name/n umber , manufacturer’ s identification numbers , and engine serial numbers in the space provided f or easy access . These numbers ...
-
Simplicity Cobalt 2690479 - page 14
12 www .simplicitymfg.com Safety SAFETY DECALS This unit has been designed and manuf actured to provide y ou with the saf ety and reliability y ou would e xpect from an industr y leader in outdoor pow er equipment manuf acturing. Although reading this manual and the saf ety instructions it contains will provide you with the necessar y basic knowled ...
-
Simplicity Cobalt 2690479 - page 15
13 Safety Safety Interlock System SAFETY INTERLOCK SYSTEM This unit is equipped with saf ety interlock s witches . These saf ety systems are present f or y our saf ety , do not attempt to bypass saf ety switches, and ne ver tamper with saf ety de vices. Check their operation regularly . Operational SAFETY Checks T est 1 — Engine should NO T crank ...
-
Simplicity Cobalt 2690479 - page 16
14 www .simplicitymfg.com Controls CONTR OL FUNCTIONS The inf ormation below briefly descr ibes the function of individual controls. Star ting, stopping, driving, and mowing require the combined use of se v er al controls applied in specific sequences. T o lear n what combination and sequence of controls to use f or v arious tasks see the OPERA TIO ...
-
Simplicity Cobalt 2690479 - page 17
Features & Controls 15 Controls Fuel T ank Cap T o remove the cap , tur n counterclockwise . Fuel Level Gauge Displa ys the fuel le v el in the tank. Hour Meter / Maintenance Reminder Measures the time of the PT O being engaged. The hour meter measures the number of hours the PT O has been engaged. The hour meter will flash an initial oil chang ...
-
Simplicity Cobalt 2690479 - page 18
16 www .simplicitymfg.com Operation GENERAL OPERA TING SAFETY Bef ore first time operation: • Be sure to read all information in the Safety and Operation sections bef ore attempting to operate this tractor and mo wer . • Become familiar with all of the controls and how to stop the unit. • Dr ive in an open area without mo wing to become accus ...
-
Simplicity Cobalt 2690479 - page 19
W ARNING If you do not under stand ho w a specific control functions, or have not yet thor oughly read the FEA TURES & CONTROLS section, do so now . Do NO T attempt to operate the tractor without first becoming familiar with the location and function of ALL controls. ST ARTING THE ENGINE 1. While sitting in the operator’ s seat, engage the pa ...
-
Simplicity Cobalt 2690479 - page 20
Operation ZER O TURN DRIVING PRA CTICE The le v er controls of the Zero T ur n rider are responsiv e, and learning to gain a smooth and efficient control of the rider’ s f orw ard, re v erse, and turning movements will tak e some practice . Spending some time going through the maneuv ers shown and becoming f amiliar with ho w the unit accelerates ...
-
Simplicity Cobalt 2690479 - page 21
AD V ANCED DRIVING Executing an End-Of-Ro w Zer o T urn Y our Zero T ur n Rider’ s unique ability to tur n in place allows y ou to turn around at the end of a cutting row r ather than having to stop and Y -tur n before starting a new row . F or e xample, to e xecute a left end-of row zero turn: 1. Slow down at the end of the row . 2. Move the RIG ...
-
Simplicity Cobalt 2690479 - page 22
Operation Figure 9. Raise & Lower the Roll Bar A. Hair Pin Clip B. Retainer Pin C. Roll Bar D . Rubber Stop 20 Operation RAISE & LO WER THE R OLL B AR T o lower the r oll bar: 1. Pull the hair pin clips (A, Figure 9) out of the retainer pins (B). 2. Push or pull the top of the roll bar (C) forward against the rubber stops (D) and remov e th ...
-
Simplicity Cobalt 2690479 - page 23
21 Operation Operation MO WING Bef ore mowing, set the cutting height as described in the T roubleshooting, Adjustments & Ser vice section. 1. Engage the par king brak e. Make sure the PT O s witch is disengaged and the motion control le v er is in the NEUTRAL position. 2. Star t the engine (see ST ARTING THE ENGINE). 3. Set the throttle to FUL ...
-
Simplicity Cobalt 2690479 - page 24
22 www .simplicitymfg.com Operation Operation When and How Often to Mo w The time of da y and condition of the grass g reatly aff ect the results you’ll get when mo wing. For the best results, f ollo w these guidelines: 1. Mow when the grass is between three and fiv e inches high. 2. Mow with shar p blades . Shor t clippings of grass one inch or ...
-
Simplicity Cobalt 2690479 - page 25
Operation 23 Operation Figure 13. T railer W eight Recommendations A. Clevis Pin B. Clip A TT A CHING A TRAILER The maximum weight of a to wed tr ailer should be less than 200 lbs (91kg). Secure the trailer with a appropriately sized cle vis pin (A, Figure 13) and clip (B). Excessiv e towed loads can cause loss of tr action and loss of control on s ...
-
Simplicity Cobalt 2690479 - page 26
24 www .simplicitymfg.com Maintenance MAINTENANCE SCHEDULE The f ollowing schedule should be f ollowed f or normal care of your rider and mower . Y ou will need to keep a record of your oper ating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour meter . * Ref er to engine owner’ s manual. ...
-
Simplicity Cobalt 2690479 - page 27
25 Maintenance Tire Pressure F ront 25 psi (1,72 bar) Rear 15 psi (1,03 bar) Figure 14. Checking Tire Pressure CHECK TIRE PRESSURES Tire pressure should be check ed periodically , and maintained at the le v els shown in the chart. Note that these pressures ma y diff er slightly from the “Max Inflation” stamped on the side-wall of the tires . Th ...
-
Simplicity Cobalt 2690479 - page 28
26 www .simplicitymfg.com Maintenance Regular Maintenance Figure 16. Checking Hydraulic Oil Level A. Hydraulic Oil Reser v oir B. Reser v oir Cap A B CHANGE HYDRA ULIC OIL FIL TER Change Interval: Every 250 Hours Filter P art Number: 1719168 NO TE: Removing the oil filter from the filter base will drain the oil reservoir . Hav e a suitable containe ...
-
Simplicity Cobalt 2690479 - page 29
27 Maintenance Regular Maintenance LUBRICA TION Lubricate the unit at the locations shown in Figures 18 through 22 as well as the f ollo wing lubrication points. Grease: • front caster wheel axles & yok es • deck lift piv ot b loc ks • mower dec k spindles • mower dec k idler arm Use grease fittings when present. Disassemble par ts to a ...
-
Simplicity Cobalt 2690479 - page 30
28 www .simplicitymfg.com Maintenance Regular Maintenance B A TTER Y MAINTENANCE NO TE: This unit is equipped with a maintenance-free BCIU1 batter y . Cleaning the Battery and Cables 1. Remove the h ydr aulic oil reser v oir mounting hardware (C , Figure 23) and mo v e the reser v oir (D) f orward to e xpose the batter y . 2. Disconnect the cables ...
-
Simplicity Cobalt 2690479 - page 31
29 Maintenance Regular Maintenance Figure 25. Balancing The Blade Figure 26. Installing The Blade A. Blade Bolt B. Flat W asher Nail SER VICING THE MO WER BLADES 1. Blades should be shar p and free of nicks and dents. If not, shar pen blades as described in the f ollowing steps . 2. T o remov e blade f or shar pening, use a 1” wrench on the flats ...
-
Simplicity Cobalt 2690479 - page 32
30 www .simplicitymfg.com T roubleshooting TR OUBLESHOO TING While nor mal care and regular maintenance will e xtend the lif e of y our equipment, prolonged or constant use ma y e v entually require that ser vice be perf ormed to allow it to continue operating properly . The troubleshooting guide belo w lists the most common problems , their causes ...
-
Simplicity Cobalt 2690479 - page 33
31 T roubleshooting Rider Troubleshooting Continued. PROBLEM CA USE REMED Y Engine runs, but rider will 1. Hydraulic release valv e(s) 1. T ur n valv e(s) clockwise to close . not drive. in “open” position. 2. Belt is broken. 2. See Drive Belt Replacement. 3. Dr ive belt slips . 3. See prob lem and cause below . 4. Brake is not fully released. ...
-
Simplicity Cobalt 2690479 - page 34
32 www .simplicitymfg.com T roubleshooting TR OUBLESHOO TING COMMON CUTTING PROBLEMS PROBLEM CA USE REMED Y Streaking. 1. Blades are not shar p. 1. Sharpen your blades . 2. Blades are wor n down to f ar . 2. Replace your b lades . 3. Engine speed is too slow . 3. Alwa ys mow at full throttle. 4. Ground speed is too fast. 4. Slow do wn. 5. Deck is p ...
-
Simplicity Cobalt 2690479 - page 35
33 T roubleshooting, Adjustment & Service SEA T ADJUSTMENT See Figure 27. The seat can be adjusted f orward and back. Move the le v er (A) f orw ard, position the seat as desired, and release the le v er to lock the seat into position. GR OUND SPEED CONTR OL LEVER ADJUSTMENT The control le v ers can be adjusted in three wa ys . The alignment of ...
-
Simplicity Cobalt 2690479 - page 36
34 www .simplicitymfg.com T roubleshooting T roubleshooting, Adjustment & Service Figure 31. Return to Neutral Adjustment A. Return Spring B. Set Collar A B NEUTRAL ADJUSTMENT If the tractor “creeps” while the ground speed control le v ers are lock ed in NEUTRAL, then it ma y be necessar y to adjust the linkage rod. NO TE: P erf orm this ad ...
-
Simplicity Cobalt 2690479 - page 37
35 T roubleshooting T roubleshooting, Adjustment & Service Figure 32. Parking Brake Adjustment A. Brake Spring B. Adjustment Nut A B CA UTION Do not adjust the spring to be shorter than 1-15/16” (4,9 cm) when compressed. This ma y damage the brake mechanism. P ARKING BRAKE ADJUSTMENT 1. Disengage the PTO , engage the par king brak e, stop the ...
-
Simplicity Cobalt 2690479 - page 38
36 www .simplicitymfg.com T roubleshooting T roubleshooting, Adjustment & Service W ARNING Use two hands when adjusting the shoc k springs. This will prevent the wrenc h from slipping while pressure is being applied. T o adjust the upper mounting position (Rear Shocks): 1. Park machine on a flat, le v el surf ace. Disengage the PT O , stop the ...
-
Simplicity Cobalt 2690479 - page 39
37 T roubleshooting T roubleshooting, Adjustment & Service C Figure 34. Mowing Height Adjustment A. Cutting Height Adjustment Pin B. Deck Lift Foot P edal C. Deck Lift Lock le ver B A OPTIONAL POSITION A B C Figure 35. Foot Pedal Adjustment A. Deck Lift Foot P edal B. Pedal Mount T ab C. Pedal Mount Har dware MO WING HEIGHT ADJUSTMENT The cutti ...
-
Simplicity Cobalt 2690479 - page 40
38 www .simplicitymfg.com T roubleshooting T roubleshooting, Adjustment & Service Measure 1st Measure 2nd Measure 1st Measure 2nd Inner Rod Outer Rod Inner Rod Outer Rod Adjust Here Figure 36. Measure the Inner & Outer Lift Rods Figure 38. Adjust the Inner & Outer Lift Rods Adjust Here DECK LIFT R OD TIMING ADJUSTMENT 1. Park machine on ...
-
Simplicity Cobalt 2690479 - page 41
39 T roubleshooting T roubleshooting, Adjustment & Service Figure 39. 2 x 4 Locations A. 1/4” Spacers Figure 40. Hanger Chain Adjustment DECK LEVELING ADJUSTMENT NO TE: Before adjusting the dec k le v el, the dec k lift rod timing must be chec ked and/or adjusted. 1. Park machine on a flat, le v el surf ace. Disengage the PT O , stop the engi ...
-
Simplicity Cobalt 2690479 - page 42
40 www .simplicitymfg.com T roubleshooting 8 3/8” (21,2 cm) Figure 42. Hydraulic Pump Drive Belt Replacement A. Pump Drive Belt B. Crankshaft Pulley C. Pump Pulley D . Idler Pulley E. Idler Arm F . Spring G. Spring Anchor Hook B D A C C F G E HYDRA ULIC PUMP DRIVE BEL T REPLA CEMENT 1. Park the tractor on a smooth, le v el surf ace such as a conc ...
-
Simplicity Cobalt 2690479 - page 43
41 T roubleshooting T roubleshooting, Adjustment & Service MO WER BEL T REPLA CEMENT 1. Park the tractor on a smooth, le v el surf ace such as a concrete floor . Disengage the PT O , engage the parking brake , turn off the engine, and remov e the ignition ke y . 2. Using a 1/2” break er bar , place the square end in the square hole located in ...
-
Simplicity Cobalt 2690479 - page 44
42 www .simplicitymfg.com T roubleshooting T roubleshooting, Adjustment & Service B A TTER Y CHARGING A dead batter y or one too weak to star t the engine ma y be the result of a def ect in the charging system or other electrical component. If there is any doubt about the cause of the problem, see y our dealer . If you need to replace the batte ...
-
Simplicity Cobalt 2690479 - page 45
43 Specifications ENGINE: 27 HP* K ohler Make K ohler Model CV740S Horsepower 27 @ 3600 rpm Displacement 44.24 Cu. in (725 cc) Electrical System 12 V olt, 16 amp. Alternator , Batter y: 340 CCA Oil Capacity 4.2 pt. (2.0 L) w/ Filter CHASSIS: Fuel T ank Capacity: 11 Gallons (41.6 L) T otal Rear Wheels Tire Size: 22 x 11.00 -10 Inflation Pressure: 15 ...
-
Simplicity Cobalt 2690479 - page 46
44 www .simplicitymfg.com Notes Not for Reproduction ...
-
Simplicity Cobalt 2690479 - page 47
Not for Reproduction ...
-
Simplicity Cobalt 2690479 - page 48
MANUF A CTURING, INC . 500 N Spring Street / PO Bo x 997 P ort Washington, WI 53074-0997 www .simplicitymfg.com Pr oduct Quic k Specs: ENGINE: 27 HP* K ohler Make K ohler Model CV740S Horsepower 27 @ 3600 rpm Displacement 44.24 Cu. in (725 cc) Electrical System 12 V olt, 16 amp. Alternator , Batter y: 340 CCA Oil Capacity 4.2 pt. (2.0 L) w/ Filter ...
Do you have a question concerning Simplicity Cobalt 2690479?
Use the form below
If you did not solve your problem by using a manual Simplicity Cobalt 2690479, ask a question using the form below. If a user had a similar problem with Simplicity Cobalt 2690479 it is likely that he will want to share the way to solve it.