Manual Sears KENMORE 385.1915

108 pages 9.46 mb
Download

Go to site of 108

Summary
  • Sears KENMORE 385.1915 - page 1

    OWNER'S MANUAL SEWING MACHINE ...

  • Sears KENMORE 385.1915 - page 2

    IMPORTANT SAFETY INSTRUCTIONS Your sewing machine is designed and constructed only for HOUSEHOLD use. Read all instruct=on before using this sewing machine, DA N G ER- To reduce the risk of electric shock: 1. An appliance should never be left unattended when plugged in. Always unplug this appliance from the electric outlet immediately after using a ...

  • Sears KENMORE 385.1915 - page 3

    SEARS, ROEBUCK AND CO. Dear Customer: You have just invested in a very fine zigzag sewing machine. Before using your new Kenmore machine, please pause for a moment and carefully read this booklet which contains instructions on how to operate and care for your machine. Specific instructions are given on threading, tension adjustments, cleaning, oili ...

  • Sears KENMORE 385.1915 - page 4

    SECTION SECTION KNOW YOUR MACHINE A Portable Case or Cabinet is Available ....... 4 Locate and Identify the Parts .............. 5_6 Identify the Accessories ................... 6 2. PREPARE YOUR MACHINE FOR SEWING Set Up the Machine .................. 7_11 • Plug m the Machine and Switch on the Power . . 7 Set the Foot Control ................. ...

  • Sears KENMORE 385.1915 - page 5

    • Gathering ...................... 52 Straight Stretch [] ..................... 53 Lock-a-Matic Seam [] .................... 54 Outline Stretch [] ..................... 55 Saddle Stitch [] ....................... 56 Zigzag Stitches [] _[], [] , [] and _], 57_63 • Basic Zigzae _ .................. 57 • Satin Stitch _] ..................... 58 ...

  • Sears KENMORE 385.1915 - page 6

    A full line of sewing cabEnets is available atyour nearest Sears retail store or through our general catalog. Another option.., buy a Carrying Case,, • then your Kenmore goes anywhere, can be stored anywhere. Fig. 1 .J Fig. 2 ...

  • Sears KENMORE 385.1915 - page 7

    Locate and Identify the Parts ;SECTION KNOW YOt Thread Spool Pin Upper Th read Gu ide Take-up Lever Top Thread Tension Control Face Cover Plate Thread Cotter Extension Table {Acc'esso ry storage b ox) J Display sharpness adiosting knob / / Liquid Crystal Display f _St_t Key board ch Pattern Chart Needle Position Button Auto-Lock Button R ...

  • Sears KENMORE 385.1915 - page 8

    Locate and Identify the Parts (Continued) Carrying Handle Bobbin winder spmdfe Bobbin w_ nder stopper Hand Wheel Light and Power Switch Machine sockets Power supply cord,,,/ Nomenclature Plate Foot Control Hole for additional spoo] pin Prasser Foot Lever Free Arm Drop teed lever Bobbin Large screw dr_ver Large spool holder __Lint brush Small sc ...

  • Sears KENMORE 385.1915 - page 9

    Set Up the Machine e Plug in the Machine and Switch on the Power (_ Power supply Power switch supply ppfy cord Foot control Machine sockets Machine plug I_) Foot control plug Before connecting the power cord, make sure the voltage and frequency shown on the machine conform to your electrica_ power. Turn off the power switch, and insert the foot con ...

  • Sears KENMORE 385.1915 - page 10

    :SetUp the Machine (Continued) • Set the Foot Control Foot control The foot controi regutates the speed at which you Sew. "To increase speed, gently press down with the bail of your foot. To decrease speed, release your foot pressure slightly. NOTE: e Check the Feed Balance Dial f For most sewing, thegroove in the Feed Balance Dial should po ...

  • Sears KENMORE 385.1915 - page 11

    RE YOURMACHINE FOR SEWING • Adjust the Presser Foot Lever posit_on position :OOt lever The Presser Foot Lever ra+ses and lowers your presser foot+ You can raise it about 1/4" h}gher than the normal up posit+on for easy removal of the presser foot or to help you place heavy fabr+cs under the presser foot, You don't need a pair of smssors ...

  • Sears KENMORE 385.1915 - page 12

    e Accessory Storage Box The iid of the accessory storage box lifts open toward you. Sewing accessones are conveniently located in the box. • Free-Arm Sewing: the Removab|e Extension Table The extenston table provides added sewing surface and can be easily removed for free arm sewing. For free arm sewing, Pull the end of the extension table aw ...

  • Sears KENMORE 385.1915 - page 13

    Stitching sfeeves, waistbands, pants legs, or any circular garment area. ::8 Darning socks or mending knees, elbows, or areas of wear in children's clothes, * Sewing buttons on sJeeves, waistbands, etc. 11 ...

  • Sears KENMORE 385.1915 - page 14

    The Presser feet are an important feature of this machine. You need to know what each foot does in order to use them effective|% The Foot Storage Compartment with most of the presser feet is located in the accessory storage box. (See page 10), Automatic buttonhole foot N and other sewing accessories wifl be found under the Foot Storage Compartment, ...

  • Sears KENMORE 385.1915 - page 15

    • Presser Foot Types A. Zigzag Foot A: Zigzag foot Use this foot for both straight and zigzag stitching. The black button on the right stde of the foot sets the foot to remain rigid so that you can sew on heavy fabrics. (See p, 32 for detailed instru- ctsons.) Stitch Patterns: [] _ [] C, Overedge Foot C; Overedge toot This foot is especially cons ...

  • Sears KENMORE 385.1915 - page 16

    • Presser Foot Types (Continued) G. Blind Hem Stitch Foot H. G:' B_ind hem stitch foot Use this foot for perfect blind hemming and topstltching. The foot has ridges on the bottom to keep the fabric from slipping and a guide screw on top to guide the folded edge of your hem, For detailed instructions, see p. 48, 50 and 72 _ 73. Stitch Pattern ...

  • Sears KENMORE 385.1915 - page 17

    e Check the Presser Foot Your presser foot _s held m place by a Foot Holder. Each presser foot merely snaps on the foot holder, which is seldom removed. If you need to remove or attach the foot hoJder, here is what you do: To Remove: Foot screw To Remove: Turn the screw toward the back of the machine. Use the large screw driver. To Attach: Presser ...

  • Sears KENMORE 385.1915 - page 18

    • .= ,,,_r Twin Needle Black shank The choice of needle and thread depends on the fabric you are sewing. In your needle case, you will find the following color-coded needles; Blue (1 1) .......... for stretch fabrics Orange (11} ........ _ for Iightweight fabrics Red (14) .......... for medium or meElium-heavy weight fabrics Purpie (16) ......... ...

  • Sears KENMORE 385.1915 - page 19

    e Fabric, Needle, Thread and Stitch Length Chart f FABRIC Lightweight: Battste, Dimity, Chiffon, Silks, Fine Lace, Organza, Crepe, Taffeta, Voile, Organdy Medium Weight: Cotton, Cotton Blends, Percale, Gingham, Shantung, Pique, Seersucker, Satin, Kmts, Su_tings, Linen, Woo] Crepe, Leather M_dium Heavy Weight: Corduroy, Denim, Wool, Sailcloth, Wool ...

  • Sears KENMORE 385.1915 - page 20

    • To Remove the Bobbin from the Machine J (_) Remove the cover plate by (_)Takeoutthebobbin. sliding the hook cover plate release button to the right. • Horizontal Spool Pin Ordinary Spool Small Spool Lift up the spool pin, Place the spool of thread on the spool pin with the thread coming off the spool as shown. Attach the large spool holder pr ...

  • Sears KENMORE 385.1915 - page 21

    e Wind the Bobbin 0 Guide the thread around the thread guide. Th read gu i de jD Bobb]n wJ nder stopper #® winding spindle (_) Thread through the hole in the bobbin from the inside to the outstde. (_) Put the bobbin on the bobbin winder spindle, and push _t to the right. With the free end of the thread he_d in your hand, depress the foot control. ...

  • Sears KENMORE 385.1915 - page 22

    • Insert the Bobbin into the Bobbin Holder (_ Put the bobbin into the bobbin holder so that the thread feeds counter-clockwise (left). (_) Pull about 4 inches of thread toward you through the tension slot (_), (_ Then pull the thread clockwise toward the back of the machine through the slot (_, (_) Pull out about 15 cm (6") of thread and att ...

  • Sears KENMORE 385.1915 - page 23

    7_ ¸ -- : i ¸ ! .... .... Prepare the Top Thread e Thread the Needle ® Raise the presser foot lifter, Press the Up/Down needle position button twice to rinse the needle. (&) Draw thread into thread guide using both hands. (_ Then down around the check spring holder. (_) Firmly draw the thread from right to left over the take-up lever and dow ...

  • Sears KENMORE 385.1915 - page 24

    Prepare theTop Thread (Continued) • Pick Up the Bobbin Thread t_) Hold the top thread _ightly with your left hand. | tlU / n_dle posit ion ..... i_._/ button ._) , J (_ Press the Up/Down Needle Position Button Twice. Bring the bobbin thread up by pulling the top thread. ....... J (_ Pull both threads under and to the back of the presser foot, lea ...

  • Sears KENMORE 385.1915 - page 25

    ® Adjust the Top Thread Tension Top s_de ot fabric Top thread thread Setting mark Loosen__ Tighten For Straight Sotch The _deal stratght stitch will have threads locked between the two layers of fabric, as shown above, magnified to show detail. If you look at the stitch, front and back, you will notice that there are no gaps, that each stitch is s ...

  • Sears KENMORE 385.1915 - page 26

    : PreparetheT0pThrea d (Continued) • Adjust the Top Thread Tension (Continued) For Zigzag Stitch tn the correct zigzag stitch, the bobbin threads will not show on the top side of fabric and the top threads will show slightly on the bottom side. See below for the correct appearance. To match this appearance, adjust your top tension. Top tension To ...

  • Sears KENMORE 385.1915 - page 27

    Main Function of Buttons r_ Up/Down U needle q _" POsition 11 ,o,,oo Reverse stitch button e Reverse Stitch Button Use th_s button to: -- secure seams. --reinforce the seams and the top edges of pockets: At Straight Stitching, Zigzag Stitching ( -_ )and Mending Stitching ( i}_i ), Press and hold the reverse stitch button. The machine will sew ...

  • Sears KENMORE 385.1915 - page 28

    Control Panel Display sharpness adjusting knob Mode Button Twin Need}e Button Mirror Image Button Pattern Selection Button Memory Button Buttons Stitch Pattern Chart Liquid Crystal D_splay [ Stitch Width Control Button Stitch Length Control Button • Display Sharpness Adjusting Knob ...... / By turning the display sharpness adjusting knob, sharpne ...

  • Sears KENMORE 385.1915 - page 29

    e Mode Button When the power switch Is turned on, the utility mode is set automatically. Press the mode button, to change to block alphabet or script alphabet, The LED indicates the mode selected. e Pattern Selection Buttons f Pattern 30 Utility mode i'_ ® {-T_÷ Flooh 1 7 Ftashed ' ( :3 0 "e" _ _ ) alternately Cursor 0OT Stitc ...

  • Sears KENMORE 385.1915 - page 30

    Memory Button • Mirror Image Button • Clear Button The Memory Button, with its LED Light, wilt "memorize" your pattern selection. Press the Memory Button after you select your stitch pattern. The LED light wlll go on to show that the machine has recorded your selection. NOTE: If you are selecting a series of different stitch patterns, ...

  • Sears KENMORE 385.1915 - page 31

    e Twin Needle Button • Editing Button 3ust press this button and the machine Use this button to: automatically reduces the maximum w_dth for twin needle sewing, Press button again for single needle sewing, For detailed instruction, see page 80. check and correct pattern comb_- nations before sewing, -- press again when editing is completed and th ...

  • Sears KENMORE 385.1915 - page 32

    e Message Button (Example) pattern 10 [lo --0 root ^ I I I I ISTRA!GHT STITCH'] _iVCH.,FooT:k oR I:E. TENSION:5, H" WIDTH CONTROL DLE POSITIONS When you press the message button, the message on the Hquid crystat display will scrofl to the left after 2 seconds. * Suitable presser foot, Thread tension, Pressure or spemaI sewing method will ...

  • Sears KENMORE 385.1915 - page 33

    Use the Seam Guides Cornen ng gutcle The seam guides on the needle plate are engraved to hefp you measure seam width. The lines are 1/8" apart, with the 5/8" and 7/8" lines marked. Turn a Square Corner Cornenng uide To turn a square corner 5/8" from the fabric edge: 1. Stop stitching and lower the needle by pressing the Up/Down ...

  • Sears KENMORE 385.1915 - page 34

    : Sewing on Heavy:Fabrics Dropping the Feed Dogs J When sewing from 3 to 12 layers of fabric, such as sewing over welt seams when hemming jeans. 1, Use Foot A (Zigzag foot} with the black spring button. NOTE; This black button locks the foot so it does not give with the fabric. 2. Sew as usual. 3. Stop when your needle reaches the point where the f ...

  • Sears KENMORE 385.1915 - page 35

    Basting [] • ....... iCTICE COMMON:STITCHING SKI LLS 19 f t Sat the Machine [19 Foot ] Thread lension 0 to 2.5 A: Zigzag foot Pressure Adiusting Lever: 0 Drop teed lever Blue needle No. 1_ J Drop the feed dogs, {see p. 32). 1, Press the foot controi, The machine will make one stitch and stop automattcaUy. 2. Release the foot control 3. Hold the f ...

  • Sears KENMORE 385.1915 - page 36

    34 10 Set the M;_chine | I + [io---O root A t Thread tension 2to 6 Pressure Adjusting Lever: 0 F" Satin stitch foot Drop teed lever 1. Drop the feed dogs. (see p. 32). 2, Stretch the fabric with the hole in the center between embroidery hoops, as shown. 3. Lower the presser bar and sew at a slow speed. 4. Move the fabric back and forth slowly ...

  • Sears KENMORE 385.1915 - page 37

    Sew a Button 13 Thread tension 3_o6 F Satin stlteh foot Drop teed lever Drop the feed dogs. (see p. 32). 1. Match the button holes to the horizontal slot on the presser foot. 2. Lower the toot to hold the button in place. 3, Turn the hand wheel by hand until the needle point _s _ust above the button. 4. Press the stitch width button (+ or --} so ...

  • Sears KENMORE 385.1915 - page 38

    It's as easy at A -- B -- C Set the Machine 10 ! $ [lo Foot AJ Thread tension 2to 6 E; Z_pper foot A The Pin on the J_ left hand side A. Attach the zipper foot, as shown, 1. To sew on the left side of the zipper, attach the foot holder to the right pins on the zipper foot, 2. To sew on the right side of the zipper, attach the foot holder to th ...

  • Sears KENMORE 385.1915 - page 39

    :Put in a Zipper (Continued) C (t/8") Zipper teeth C, Sew In the zipper. !. FoJd back the left seam allowance as shown. 2. Turn under ,the right seam allowance to form a 1/8" _old. 3. Place the zipper teeth next to the 1/8"" fold and pmm place. NOTE: Be sure the top of the zipper (the slider) is at the top of the garment. 4, Att ...

  • Sears KENMORE 385.1915 - page 40

    10. Close the zipper andturn the fabric top side up. Spread flat. 1t. Remove the zipper foot and attach the foot holder to the left pros on the z_pper foot. 12. Stitch across and below the bottom of the z_pper. 13. Turn the corner and continue to gulde the foot along the zrpper teeth, as shown. Stitch through the fabric and the zipper tape. 14, Sto ...

  • Sears KENMORE 385.1915 - page 41

    !: W!:!"/ :i_?_i:_-_ Y!_ ! Z _ : ?_:" : _?:_w v Chart of Sewing F, unctions Now that you are familiar with your machine and ready to sew, what are you going to sew? The following chart tells you (in atphabettcal order) what sewing functions this machine performs and directs you to the proper page for detailed instructions, in many cases, ...

  • Sears KENMORE 385.1915 - page 42

    Stitch Pattern Chart Stitch No, Pattern STRAIGHT 10 I f LOCK-A- MATIC SEAM 11 STRAIGHT STRETCH 12 Iff m S ZIGZAG tregu|ar) ,.w , 11 Foot Straight (H} Zigzag (A} Zigzag (A) MENDING ;14 12 Straight (H) Zigzag (A} 13 Zigzag (A} Overedge {C) _ Zigzag (A} Other Attach. Quilter Zipper foot Blind hem stitch foot Satin stitch foot Needle Thread Adjusting C ...

  • Sears KENMORE 385.1915 - page 43

    Stitch pattern OVEREDGE SEAM BLIND HEM STITCH s OUTLINE STRETCH s SADDLE STITCH s BASTING I 6 17 18 19 Foot Other Attach. 8lind Hem [_ Stitch (G) Zigzag (A) Zigzag (A} Blind Hem Stitch _G) Zigzag (A} Uses for overcesung0 for knits and woven fabrics needing extra strength, for narrow seams on knits or heavy wmght woven fabrics. place of straight sti ...

  • Sears KENMORE 385.1915 - page 44

    Stitch Pattern Chart (continued): Stitch Pattern KNIT STITCH 20 S TWIN NEEDLE STITCHES 21 SCALLOP STITCH 21 22 S FEATHER STITCH 25 26 S _ DOUBLE EDGE ZIGZAG 27 No, Foot 20 Zigzag (A) 22 Zigzag IA) 24 25 30 or 36 Satin (F) 40 41 21 22 Zigzag {A) 25 26 Zigzag {A) 27 Overedge _C) Other Attach, Twin Needle Check Chart Needle Thread Tension Blue t11) 3 ...

  • Sears KENMORE 385.1915 - page 45

    Stitch Pattern No. BLIND HEM 28 STITCH SHELL 28 STITCH AUTOMATIC 29 DARNING 29 CUT-OUT WORK 30 APPLIQUE 31 H E STITC H ES Foot Blind Hem [_ Stitch (G) Sattn IF) Sliding Buttonhole (a) Sat,n IF} [_ Other Attach. Needle Check Chart on p. 1_77 Check Chart on p. 17 Check Chart on. p. 17 Check Chart on p, 177 Thread Tension 2~6 6_9 L ................... ...

  • Sears KENMORE 385.1915 - page 46

    Stitch Pattern Chart (Continued) Stitch Pattern RICK*RACK STRETCH 32 ELASTIC CASING FAGOTING CROSS STITCHING 34 ELASTIC STR ETCH SMOCKING STITCHES 36 S No. Foot Other Needle Attach. 32 _ Check 2 _ 6 Zigzag (A) _ Chert on p. 17 Satin (F) [_ 33 Use paper Cheek 3 _ 8 behind Chart on p. 17 Satin (F} 34 Check 2 ~ 6 Chart onp. 17 Satin (F} 35 =I' Ch ...

  • Sears KENMORE 385.1915 - page 47

    Stitch Pattern SAND STITCHING 38 DECORATIVE 43_ GEOMETRIES 54 43 54 SHADING 55 STITCH 56 55 56 STRETCH STITCH 39_ DECORATIVE 4t, No, Foot 38 57~ I 67 Satin {F} [_ Satin IF} [_ Satin (F) [_ Satin (F) Needle Check Thread Tension 2~6 2-8 Adjusting Lever 1 or2 Uses Fill in designs already outlined with satin or Other embro=dery stitch, Decorate garment ...

  • Sears KENMORE 385.1915 - page 48

    l Stitch Pattern No. MONOGRAM 00_ Numbers, 40 Letters, Period, Space BUTTONHOLE Bartack Rounded Keyhole 1 2 3 Foot Satin fF} Slidlng Buttonhole (J) Automatic buttonhole IN} Other Attach. Needle Check Chart on p. 17 Check Chart on p. 1j Thread Tension 2-6 2~6 Adjusting Lever Uses Numbers and letters or sentences may be programmed in sequence for mon ...

  • Sears KENMORE 385.1915 - page 49

    Straight Stitches []_ [_ and [] When you turn on your machine, it is auto- matJcally set to sew a straight stitch o Straight Stitch Set the Machine 10 I + [io---e FDoT A ] Th read te nsio n 2to5 H: Straight stitch foot The Stitch and its Uses You can use your basic straight stitch in many ways besides just sewing a straight seam. Three common uses ...

  • Sears KENMORE 385.1915 - page 50

    e Topstitchlng Set the Machine _0 I t + [ --e root Aj Thread tension 2to6 A: Zigzag foot G. BHnd hem stitch foot De Stttch and Its Uses Topstitching emphasizes the lines of your garment and keeps seams and edges fiat and crisp, Accent suits or b_ouses with one or two rows of topstitching around the outer edges of cuffs, fapets or collars. Use the A ...

  • Sears KENMORE 385.1915 - page 51

    ,, :I?_C: f_ :i_! ::, :: ,::, :,,: .... _ _ i(!i:!i::i:i?ii! i ¸:iiii:i:!!;_i;i;_i '¸!:: ® Position the Needle for Topstitching The needle can be positioned to the left, center and right. i _o -_ wo.o t2.23 1 1 To position the needle to the left: You can move the needle to any position desired by pressing stitch width control button. W 0.0 ...

  • Sears KENMORE 385.1915 - page 52

    e Pintucking Sat the Machine 10 I + [Io--- ooT A I Thread tension 2to 6 ]'he Stitch and Its Uses Pintucks are narrow tucks spaced close together to add design interest on such items as blouses and pillowcases, One pintuck can form a permanent front crease on knit pants. Sliding guide Guide screw Here*s How 1. Attach the blind hem stitch foot. ...

  • Sears KENMORE 385.1915 - page 53

    LEA RNTH E STITCHES • Quilting SettheMachine 1o i I + (!0-4 F00 A ] Thread tension 2to 6 D: Quilter or A: Zigzag toot H: Straight stitch toot The Stitch and Its Uses Quilting is stitching two layers of fabric together with batting in between to add dimension and warmth. You can use quilting on entire garments or parts of garments, such as yokes, ...

  • Sears KENMORE 385.1915 - page 54

    ¸¸¸7:¸¸¸¸ ¸ i: _ : • Gathering Set the Machine 10 l 1 + Foot A ] Thread tension 1 to4 A: Zigzag foot [ lo w35 L40) The Stitch and Its Uses Use this stitch to gather trim skirts, sleeves at the top, smocking or any t=me you want more fullness. Use two rows of stitches. Here's How (for medium weight fabrics and tight, firm gathers) 1. ...

  • Sears KENMORE 385.1915 - page 55

    straight stretch _] ES 12 II H A I Thread tension 2_-0 6 A: Zigzag foot H: Straight stitch foot The Stitch and lts Uses This stitch is the stretch variation of the straight stitch, especially deveJoped for knits and stretch fabrics. This stitch can also be used for topstitching, A NOTE ON STRETCH STITCHING Stretch stitching was developed to be used ...

  • Sears KENMORE 385.1915 - page 56

    Locl_*_Matic Seam I _ Set the Machine " I [il z- 0oT Aj Thread tenslon ,2to6 For general sewing, the tock-a-matic stitch =s the fastest way _o sew and secure a seam. it is programmed to automatically sew reverse stitches at the beginning and when the reverse stitch button is pressed at the end of a seam, Seams are sewn quickly and securely. Lo ...

  • Sears KENMORE 385.1915 - page 57

    OutlineStretch [_ 17 f Set the Machine ]7 FOOT A Thread tension 3to6 A: Zigzag foot Blue needle No. 11 The Stitch and Its Uses This stitch pattern, a variation of the straight stitch, is a narrow stretch stitch designed to eliminate puckering on knit fabrics and bias seams. On tricot and filmy chiffons, _t can be used to seam and overcast at the sa ...

  • Sears KENMORE 385.1915 - page 58

    Set the Machine 18 Ill [18 root Ill Thread tension 2 to 6 A: Zigzag foot G: Blind hem stitch foot The Stitch and Its Uses The saddle stitch is formed with one stitch foward, two stitches backward, and a fourth stitch forward. You can achieve a lovely hand-worked Iook when topstitching suits, blazers, )umpers, and denim out-fits with the saddle stit ...

  • Sears KENMORE 385.1915 - page 59

    i3NWr00T A 1 Thread tension 3to 8 A: Zigzag toot The St=tch and its Uses The zigzag stitch is one of the most common and most versatile stitches on your machine. it can be a utility stitch for sewir_g buttons. buttonholes, hemming, overcasting mending and darning. It can also be used to decorate w_th trims, appliques and cut-out work or as a decora ...

  • Sears KENMORE 385.1915 - page 60

    Satin Stitch set the Machine 13 t j3/vv_ FOOT A J Thread tension 3to8 Pressure Adjusting Lever: or A: Zigzag foot 1 or2 F. Satin stitch foot Defeutt Stitch w_dth Stitch Length: as desired 02 to 1.0 {or as desired) The Stitch and Its Uses The Satin stitch is a versatile and often used decorative stitch, but it Can also be used to overcast a raw edge ...

  • Sears KENMORE 385.1915 - page 61

    • Overcasting Stitch set the Machine 13 113 Foot A ] Thread tension 3to 6 C: Overedge foot The Stitch and its Uses Thts zigzag variation is very useful in garment construction and in finishing raw edges of any sewing proiect. Here's How 1. The black ridge and brush and the guide wires on the overedge foot keep the edge neat and the fabric st ...

  • Sears KENMORE 385.1915 - page 62

    • Mending [] Set the Machine 14 14 ...... FOOT A] Thread tension 3to 6 A: Zigzag foot The Stitch and its Uses The mending or multiple zigzag is a comb- nation zigzag and straight stitch. Use the mending everywhere you would use the basic zigzag stitch. It has more strength, elasticity, and is flatter than a regular ztgzag. The mending stitch ts e ...

  • Sears KENMORE 385.1915 - page 63

    • Overedge Seam [] Sat the Machine _5 _ i5 _ FO0_ Thread _ens_on 3_o 7 C: Overedge foot The Stitch and its Uses This stitch pattern combines the straight and the zigzag stitches, using the overedge foot, to stitch and overcast seams in one step. It also is a stretch stitch _o provide elastictty for knits and ext]a strength for woven fabrics. Use ...

  • Sears KENMORE 385.1915 - page 64

    Knit Stitch [] Set the Machine 20 l! ,00, A Thread tension 3to 6 A: Zigzag toot Set the pressure adjusting lever to "1 ", so that the knit wilt retain its shape as you are sewing. The Stitch and Its Uses This knit stitch is ideal for sewing swimwear and stretch velour, because it provides the greatest amount of elasticity and strength. He ...

  • Sears KENMORE 385.1915 - page 65

    ® Rick-Rack Stretch [] set the Machine 32 Foot A} Thread tension 2to 6 A; Zigzag foot or F Satin stitch foot The Stitch and its Uses Sew on stretch fabrics in any area that you might use a zigzag stitch. This stitch can be used as a decorative top stitch as welf. 63 ...

  • Sears KENMORE 385.1915 - page 66

    A_tomatic D ar_ing :_ Set the Machine 29 [29 FOOT j ] Thread tension 2to6 J: Sliding buttonhole foot The machine automatically darns rips and holes. Large and smatl holes can be mended quickly and easily with this unique stitch. Buttonhole foot J is used to hotd the fabric securely while darning. For extra support or strengthening the darn pin or ...

  • Sears KENMORE 385.1915 - page 67

    e Darning Small Rips U_ULi Small rips can be repaired by programming the machine to sew a shorter darn. Begin the first row of the darn stopping the machine when you reach the bottom edge of the rtp. For example, you may on|y need to sew 5 stitches. Press the reverse button but do not hold it. The machine will now complete the 16 rows with 5 stitch ...

  • Sears KENMORE 385.1915 - page 68

    Set the Machine _] [_ B,t Foot ,. j_ Thread tension 2to6 N: Automatic buttonhole foot _ULLLj =rE:> B,2 FOOT N Rounded =L=0 B,3 Foot ,! The machine sews three different types of buttonhole to meet every sewing need. AIt three buttonholes are made in the same way. The automatic buttonhole foot will gauge the buttonhole length. Before you sew butto ...

  • Sears KENMORE 385.1915 - page 69

    ]-L_ STEP 2 !-[ ca sTEP ; ]--] | i I RAISE FOOT I [ PRESS BHI KEY J I 3. Depress the foot control and keep depressed until the machine stops by itself, The buttonhole will be automatically sewn: the front bartack and left row first, then the right row and back bartack. The machine will stop automatically. 4. To sew another buttonhole or to start fr ...

  • Sears KENMORE 385.1915 - page 70

    e Adjust the Stitch Width and Density Stitch Width: Stitch Density in Entire Buttonhole: [r'-i ws. o LO. 41 __! [__ f t H I The stitch width button controls the stitch width, it is pre-set at "5.0" Press "+" or "--" to adjust the stitch width of the entire buttonhole. 11-"1 WS. 0 LO. 4] ____I [__ r D H Fine C ...

  • Sears KENMORE 385.1915 - page 71

    Manual Bu_Onhoii:ng _ Set the Machine Thread tension 2to6 J: Sliding buttonhole to at [ _J step ] A I -.--I s EPi _] NOTE: Sen_or_ Do not put finger, screw driver or any other object near or under the sensor when sewJrlg buttonholes by us{n0 sliding buttonhole foot J. Otherwise the sewing procedure in the pattern indicator may advance to the next ...

  • Sears KENMORE 385.1915 - page 72

    [ _ SIEP 2 [ sTEp } e Stitch Density on One Side (_) Press the memory button. The machine will bartack and sew down the right side. Stop the machine when you are directly opposite the first stitch on the left hand side. (_) Press the memory button, The machine will autoqock the end of the buttonhole and stop. Keep the foot control depressed until t ...

  • Sears KENMORE 385.1915 - page 73

    Set the Machine Th rood ten,ion 2to6 Use this procedure when you want to achieve a taifored, more attraetwe raised buttonhole. Use fitler cord (at least 75 inches of heavy thread). Try a practice buttonhole first. 1. 2. 3. 4. 5. 6_ 7. 8. With the buttonho{e foot raised, hook the filler cord on the cord spur at the back of the buttonhole foot. Bring ...

  • Sears KENMORE 385.1915 - page 74

    H_imingla_d E_ging Stitches :_: and [] Set the Machine 28 Foot Thread tension 2to6 Gt 8]imd hem stitch foot [ 28 WS, 0 L2.0] Stitch width: 5.0 .... YI :Z j Hemming and Edging garments, tablecloths, napkins and craft items has often required careful hand sewing to produce a professional, finished look. The machine can do these precision stitches muc ...

  • Sears KENMORE 385.1915 - page 75

    Blind Hem Stitch (stretch) [] Set the Machine 28 Foot a Thread tenspon 2to 6 G. Blind ham stitch foot J The Stitches and Their Uses The stretch Blind Hem Stitch _ is to be used for stretch fabrics because It is the stronger and more elastic of the blind hem stitches, NO =:' .____: NO YES The regular blind hem stitch _ is strong enough for wove ...

  • Sears KENMORE 385.1915 - page 76

    e Shell Stitch [] Set the Machine 28 Thread tension 6to9 FOOT G ] F- Satin stitch foot [ 28 w5.0 L2.0 j Stitch width: 4.0 to 6,0 The Stitch and its Uses The Shell Stitch is formed by sewing a blind hem over folded fabric, Several rows of shell stitching are called shell tucks. Shell stitching can be used to finish hems, sleeve and neck openings. Sh ...

  • Sears KENMORE 385.1915 - page 77

    EAR N :T H E Sl e Scallop Stitch [] and _2_ Set the Machine 21 ) [21 Foot ^ Thread tension 3to 6 A: Z_gzag foot or The St=tch and Its Uses Use this attractive scaltop stitch to create scaf!op edges or decorate your sewing projects, such as collars, pockets or place- mats, You can create a delicate appearance on thin fabrics, such as chiffon, using ...

  • Sears KENMORE 385.1915 - page 78

    • Cut-Out Work Edging and Applique [] Set the Machine 30 (30 Foot } Thread tension 2to Pressure Adjusting Lever: The Stitch and Its Uses F Satin stitch foot ...... ,) Cut-Out Work and Applique are the major uses for this stitch, but it can also be used to provide edging on many sewing proiects, including placemats, blankets, collars0 cuffs and po ...

  • Sears KENMORE 385.1915 - page 79

    Reinforcing stitches i and tESI, • Feather Stitch Set the Machine 25 } 25 Thread tension 2to 6 FOOT A ] _ A: Zigzag foot The Stitch and its Uses This stitch is strong, useful and decorative. it can reinforce stretch and woven fabrics. You can use it to sew spandex undergar- ments or decoratively hem elastic fabric. You may also use this stitch in ...

  • Sears KENMORE 385.1915 - page 80

    e Fagoting Stitch Sat the Machine 33 [33 Fo0T Thread tension 3to 8 F Satin stJlch toot The Stitch and Its Uses Use this stitch to join two pieces of fabric to create an open work appearance and add design interest. For other stitches that may be used in fagoting, see stitch patterns [] and [] (p. 77). 1/8" Paper Here's How 1. 2. 3. J Fold ...

  • Sears KENMORE 385.1915 - page 81

    e Elastic Casing Stitch [] Set the Machine 33 toot F] Thread tension 3to 8 F Satin stitch foot The Stitch and Its Uses Use this stitch to replace bias tape casings _n such areas as wrists and waists. In children's clothing, this stitch is especially hetpfut, because it reduces bulk. Here's How 1. Slide a piece of 1/8" elastic under t ...

  • Sears KENMORE 385.1915 - page 82

    f Set the Machine 4O t t 40 FO01 F I Thread te ns_o n 3to7 A: Zigzag foot or F Satin stitch toot ===8=========== Twin needte Additional spool pro Spool pin Turn off and unplug the machine before changing the needle to the twin needle, Insert the additional spool pin, and put the felt and spool on it with the thread comming off the spool as shown. P ...

  • Sears KENMORE 385.1915 - page 83

    :; :71 Decorate with Geometric Patterns Set the Machine 49 { 49 FootF I Thread tension 2to 8 F Satin stitch toot The Stitches and Their Uses These stttches ere purely decorative. You can sew one row or several or vary the stitch width and length for special effects. Experiment on a scrap of fabric to see whet special effects are possible. Here&apos ...

  • Sears KENMORE 385.1915 - page 84

    The Stitches and Their Uses Decorative stretch patterns can be used for adding creative and personalized touch to the items you sew for your home and family. 82 ...

  • Sears KENMORE 385.1915 - page 85

    Cross Stitch [] Set the Machine 34 f34 Foot l Thread tension 2to6 F Satin stitch toot The Stitch and its Uses You can make beautiful designs with th_s embroidery stitch pattern, in half the time it would take if embroidered bV hand. You can also combine cross stitches with the other decorative patterns and letters or numbers for attractive sampters ...

  • Sears KENMORE 385.1915 - page 86

    _ is_cki_ !i !i_ _ii _i_!_i: ¸; _ i i_!i i i ¸ _'iiii_ _ i_ _:_ i_i _._ _i _ Sat the Machine 36 2to6Thread tension A; Zigzag toot or F" Satin stitch foot Stepi {1 to 6) Step li {7to8) 318" Here's How 1. 2. 3, NOTE: Choose a soft. lightweight fabric such as batiste, gingham or challis. Cut the fabric three times the finished wi ...

  • Sears KENMORE 385.1915 - page 87

    Set the Mach ine Thread tension 2to 6 FOOT F ] Pressure Adjusting Lever: I or2 F: Satin stitch foot The Stitch and Its Uses The sand stitch fTIIs in outlined embroidery designs, Here's How 1. Outilne the pattern with a Satin Stitch Set stitch width at "1.5", Set stitch length at "0.3" or as you desire, 2. FiJt in the design ...

  • Sears KENMORE 385.1915 - page 88

    Set the Machine 55 56 Thread tensio n 2to8 Pressure Adiust]ng Lever: 1 or2 F Satin stitch toot The Stitches and Their Uses These stitches can be used to quickly and neat|y outline designs. Use them to enhance apptiques and create your own machine embroidered motifs. Pattern Here°s How Draw'the destgn on the right side of the fabric. Place a t ...

  • Sears KENMORE 385.1915 - page 89

    61 F_ Thread tension 2to6 F Sad n stitch foot • One Cycle Stitching ® _ Pro,sMomo_. [o ! (_ El Press the stitch pattern. I '_ 61 1 L--Cursor See the Pattern Single Unit Chart. You will sew one flower. NOTE: The machine will sew a single pattern each time the foot control is depressed, Do not release the foot control until the machine stops ...

  • Sears KENMORE 385.1915 - page 90

    e Two Cycle Stitching ® ® Prosstho Auto-Lock. ] (_) S_ Press the stitch pattern. [ G, 5 9 ] (_) 5/ Press the next stitch pattern. [ ® 59 6 I w- flash ® [_ Press Momory. [ _, 5_ {51 DO _ f,ash (_) .___ Press the stitch pattern. I C, 59 {51 5 9 4- flash ] (_) _ Press Memory. [ 0 59 {51 59 DD_"_ashj [ (_) E / Press the stitch pattern. Q 5 9 { ...

  • Sears KENMORE 385.1915 - page 91

    Cycle Stitching by Pressing Mirror image Button Step _ Press the Auto-Lock. ®® ® El @ ¥ ®® Press Memory. Press the stitch pattern. Press Memory. Press Memory, Press Mirror image, _-_ Press Mirror image, Press the Auto-Lock, ® _ Press Memory, After selecting patterns and pressing the _°_C_ 1 button, the same number of pattecns will be sewn i ...

  • Sears KENMORE 385.1915 - page 92

    • Pattern Single Umts (Aid to Programming) 27 Jt 28--" 30' 31 > 32 _jJ 03 38 76 77 H 78 * The autoqock stitch is not programmed on above patterns, 23 24 25 ! 26-- {K- 39 40 41 42 79 80 . _ )°X::))° 55 56 72 * Up to 31 patterns can be programmed in the memory. 11 BH1 BH2 BH3 19 29 * The f°H°wmg patterns I U _) ! cannot be used in ...

  • Sears KENMORE 385.1915 - page 93

    Memory Lock Alphabet and Numbers Your machine will sew the 26 letters of the alphabet and numbers in block and script styles, Up to 31 patterns (letters, numbers, punctuation marks end spaces) can be programmed. Each letter and number is automatically locked at the beginning and end enabling you to remove the connecting threads. The chart below sho ...

  • Sears KENMORE 385.1915 - page 94

    • Combining Letters in Block Style Step _'_--,* ---- R FOOT F ® 2B S ® @ 22 M ® @ tB 1 ® 29 7" ® "L flash ( T "*" _ ) ---[. SMITO _ flash J @ @ k. 92 I? H S 14 1 TH ] +-flash (H_) S 14 _1 THE] -_ flash j (/3 _fl • Combining Large and Small Letters Step [,_ ,t, ® t_::-_I---[° FOOT F] -----[S FOOT F ] (_ [_ -- -[ _ ...

  • Sears KENMORE 385.1915 - page 95

    e Combining Letters in Script Style. Step FOOT F] Q 2; .... [ ® [_ ---I ® _ ---[ ® _---[ ® 2B ---[ ® ® _E ---[ ® _---! @ 2e --- [ 0 [_ ___[ @ 3E --- [ P F 0 Lq T____. _" P E] _ flash ] P , "_ flash P • [3_ flash ] P, S -_ flash j P, S [3 *- flash ] P. S • +-flash j P, -q" • _ "_ flash ] P • S • H *- flash ] P , ...

  • Sears KENMORE 385.1915 - page 96

    e Checking and Editing You r Program (Example) When patterns "A, B, C, D, E, F, G, H, i, J, K, L, M, N, 0" are memorized. The iiquld crystal display will shown [ABCDEFGH t JKLMNJ . * Check pattern combination before sewing. _r To Delete Patterns Without Adding: (Example: Delete pattern D} Q ® l [ SI_'B c D EF GH_I *- flash (A**O) I: ...

  • Sears KENMORE 385.1915 - page 97

    _r To De|ere and Add Patterns: |Replace D with Z) L_ ! CDEFGH4 _flash (A_O) ABC_.E,, FGHI J _" flash {_D +_ 0 ) _flash (Z _ I_ ) ABC EFGHI JKe _flash (Z "_0) [ABCZEFGHI JKLMN] Press EDIT buttom Move the cursor to alphabet D by pressing width control button + Press pattern 35, Press MEM button. Press EDIT button again when editing is compl ...

  • Sears KENMORE 385.1915 - page 98

    balance dial If decorative stitch patterns, letters/numbers or manuel buttonholes are uneven when Vou sew on a particular fabric, adjust them with the feed balancing dial, * After sewing with an altered dial setting, you must reset the dial to" !> " e To Adjust Distorted Patterns Comperssed Patterns; Correct by turning the feed balance ...

  • Sears KENMORE 385.1915 - page 99

    What to do When Condition Cause Reference The needle thread breaks, The bobbin thread breaks, The needle breaks. I, The needle thread is not threaded properly, 2. The needle thread tenslon is too tight. 3, The needle is bent or blunt, 4. The needte is _ncorrectlv inserted, 5, The needle thread and the bobbin thread are not set properly under (drawn ...

  • Sears KENMORE 385.1915 - page 100

    Condition Cause Reference Seam puckering. The cloth is not feeding smoothly, Gathering. The machine doesn't work, Patterns are distorted. The automatic buttonhole stitches are not working. Noisy operation. Machine is stopped on the sewing, ignore the button you press or does not change the display on the LCD. 1. The needle thread tension is to ...

  • Sears KENMORE 385.1915 - page 101

    Cleaning the Machine To insure that your machine operates at _ts best, you need to keep the essentlar parts clean at all times. Unplug the machine and remove the presser foot and needle, Remove the cover plate by sliding the hook cover plate release button to the right. Take out the bobbin. Brush out dust and ]int. {You may atso use a vacuum cleane ...

  • Sears KENMORE 385.1915 - page 102

    Oiling the Machine Open face cover plate and oil two points as shown below at least once a year. One or two drops of oil is sufficient. Remove excess oil; otherwise it may stain fabrics. In case machine is not used for an extended time, oil it before sewing. Use Kenmore sewing machine oil. No other oiling is required. 100 ...

  • Sears KENMORE 385.1915 - page 103

    PARTS LIST f 1 2 4 5 7 % 10 11 12 13 14 15 16 8 % 17 9 19 20 21 22 23 ® 24 28 29 30 31 32 33 25 34 26 27 % 35 36 J lOl ...

  • Sears KENMORE 385.1915 - page 104

    A_I parts listed herein may be ordered lrom any Sears store or service center. WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: 1. PART NUMBER 2. PART DESCRIPTION 3. MODEL NUMBER 4. NAME OF ITEM it the parts you need are not stocked locally, your order will be electronically transmitted to a Sears Repair Parts Distribution Center ...

  • Sears KENMORE 385.1915 - page 105

    INDEX A Accessories .................... 6 Accessory storage box ............. 5, 10 Alphabet & numbers .............. 91 Appliqueing ............. 43, 76 "Auto-Lock" pattern ......... 25 Automatic buttonholing .......... 66_68 Automatic buttonhole foot ............. ........... 12, 14, 46, 66_68, 101_102 Automatic darning ........... ...

  • Sears KENMORE 385.1915 - page 106

    Oiling ..................... 100 Outline stretch stitching ......... 4t, 55 Overcasting stitching ............... 59 Overedge foot .... 12, 13, 41"42, 101 _102 Overedge seam ................ 4t, 61 Parts list ................... 101_102 Pattern chart .................. 26 Pattern memory ............... 28 Pattern select_on ............ 27 Patt ...

  • Sears KENMORE 385.1915 - page 107

    -" ÷ WAR RANTY FULL 25-YEAR WARRANTY ON SEWING MACHINE HEAD For 25 years from the date of purchase, Sears will, free of charge, repair defects m material or workmanshtp which appear _" m the mechamca_ components of the sewing machine head. FULL TWO YEAR WARRANTY ON ELECTRICAL EQUIPMENT OF SEWING MACHINE For two years from the date of pur ...

  • Sears KENMORE 385.1915 - page 108

    SEWING MACHINE Now that you have purchased your ;<enmore Sewing Machine, should _ need ever exist for repmr parts or service, s_mpw contact your nearest Stars Service Center. Be sure to provide aH pertinent facts when you cail or visit. The model number of your Sewing Machine will be shown on your nomenclature plate on th_= back of your Sewing M ...

Manufacturer Sears Category Sewing Machine

Documents that we receive from a manufacturer of a Sears KENMORE 385.1915 can be divided into several groups. They are, among others:
- Sears technical drawings
- KENMORE 385.1915 manuals
- Sears product data sheets
- information booklets
- or energy labels Sears KENMORE 385.1915
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sears KENMORE 385.1915.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sears KENMORE 385.1915, service manual, brief instructions and user manuals Sears KENMORE 385.1915. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sears KENMORE 385.1915.

Similar manuals

A complete manual for the device Sears KENMORE 385.1915, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sears KENMORE 385.1915 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sears KENMORE 385.1915.

A complete Sears manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sears KENMORE 385.1915 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sears KENMORE 385.1915, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sears KENMORE 385.1915, that we can find in the current document
3. Tips how to use the basic functions of the device Sears KENMORE 385.1915 - which should help us in our first steps of using Sears KENMORE 385.1915
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sears KENMORE 385.1915
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sears KENMORE 385.1915 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sears KENMORE 385.1915?

Use the form below

If you did not solve your problem by using a manual Sears KENMORE 385.1915, ask a question using the form below. If a user had a similar problem with Sears KENMORE 385.1915 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)