-
Dell P45F001 - page 1
Dell Vostro 15 – 3546 Owner's Manual Regulatory Model: P45F Regulatory Type: P45F001 ...
-
Dell P45F001 - page 2
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 201 ...
-
Dell P45F001 - page 3
Contents 1 Working on Your Computer................................................................................ 5 Connecting the Power Adapter ............................................................................................................ 5 System Overview ............................................................................ ...
-
Dell P45F001 - page 4
Removing the Display Assembly ......................................................................................................... 27 Installing the Display Assembly .......................................................................................................... 30 Removing the Camera ................................................. ...
-
Dell P45F001 - page 5
1 Working on Your Computer Connecting the Power Adapter Connect the power adapter and turn on your computer. 5 ...
-
Dell P45F001 - page 6
System Overview Front and Back View 1. microphone 2. camera 3. camera-status light 4. power button 5. optical drive 6. USB 2.0 connector 7. memory-card reader 8. touchpad 9. power and battery-status light 10. speakers 11. audio connector 12. USB 3.0 connector 6 ...
-
Dell P45F001 - page 7
13. USB 2.0 connector 14. network connector 15. VGA connector 16. air vents 17. power connector 18. security-cable slot 19. battery 20. service-tag label Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each ...
-
Dell P45F001 - page 8
CAUTION: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device. 4. Disconnect all network cables from the computer. 5. Disconnect your computer and all attached devices from their electrical outlets. 6. Close the display and turn the computer upside-down on a flat work surface. NO ...
-
Dell P45F001 - page 9
Or * On the Home screen, touch the and then select Shut down . – Using a mouse: a. Point to upper-right corner of the screen and click Settings . b. Click the and select Shut down . Or * On the Home screen, click and then select Shut down . • In Windows 7: 1. Click Start . 2. Click Shut Down. or 1. Click Start . 2. Click the arrow in the lower- ...
-
Dell P45F001 - page 10
2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Removing the Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Perform the following steps as shown in the illustration: a. Slide the latches outward [1]. b. Release the battery [2 ...
-
Dell P45F001 - page 11
Installing the Battery 1. Insert the battery into the battery slot and press to lock in place. 2. Follow the procedures in After Working Inside Your computer . Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer 2. Remove the battery . 3. Perform the following steps as shown in the illustration: a. Remove the ...
-
Dell P45F001 - page 12
Installing the Optical Drive 1. Slide the optical drive into the computer. 2. Tighten the screw to secure the optical drive. 3. Install the battery . 4. Follow the procedures in After Working Inside Your computer . Removing the Access Panel 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the Battery . 3. Perform the foll ...
-
Dell P45F001 - page 13
Installing the Access Panel 1. Insert the access panel into the chassis. 2. Tighten the screw to secure the access panel to the chassis. 3. Install battery . 4. Follow the procedures in After Working Inside Your computer . Removing the Hard Drive 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the Battery . 3. Remove the ...
-
Dell P45F001 - page 14
Installing the Hard Drive 1. Slide the hard drive into the connector. 2. Tighten the screw to secure it to the chassis. 3. Install: a. access panel b. battery 4. Follow the procedures in After Working Inside Your computer . Removing the Memory Module 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. battery b. access p ...
-
Dell P45F001 - page 15
Removing the WLAN Card 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the Access panel . 3. Perform the following steps to remove the WLAN card: a. Disconnect the WLAN cables from its connectors [1]. b. Remove the screws that secures the WLAN card to the computer [2]. c. Pull the WLAN card to remove it from the computer ...
-
Dell P45F001 - page 16
3. Perform the following steps as shown in the illustration: a. Slide the keyboard from the computer [1]. b. Flip the keyboard to access the cable below [2]. 4. Perform the following steps as shown in the illustration: a. Lift the locking tab and disconnect the cable from the locking tab [1]. b. Disconnect the keyboard cable from the computer [2]. ...
-
Dell P45F001 - page 17
NOTE: When a new keyboard is shipped out for replacement the keyboard cables will not be folded . Follow the instructions below in order to fold the cables correctly : 1. Place the keyboard on a flat and clean surface. 2. Lift the keyboard cable and fold the keyboard-backlight cable at the fold line. 3. Using the alignment line, fold the keyboard c ...
-
Dell P45F001 - page 18
Removing the Palmrest Assembly 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the Battery . 3. Remove the access panel . 4. Remove the keyboard . 5. Flip the computer and remove the screws at the base of the computer. Then, release the tabs securing the base cover. 6. Perform the following steps as shown in the illustra ...
-
Dell P45F001 - page 19
7. Perform the following steps as shown in the illustration: a. Gently pry up the palmrest from the computer [1]. b. Slide the palmrest from the computer [2]. Installing the Palmrest Assembly 1. Place the palmrest on the chassis and press the notches until it clicks in place. 2. Connect the touchpad and power cables to the system board. 3. Tighten ...
-
Dell P45F001 - page 20
a. keyboard b. memory module c. hard drive d. WLAN card e. access panel f. optical disk-drive g. battery 6. Follow the procedures in After Working Inside Your computer . Removing the Battery Connector 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. Battery b. optical disk-drive c. access panel d. hard drive e. memory ...
-
Dell P45F001 - page 21
b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 3. Follow the procedures in After Working Inside Your computer . Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. Battery b. optical disk-drive c. access panel d. hard drive e. memory ...
-
Dell P45F001 - page 22
Removing the Optical Drive Connector 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. palmrest assembly 3. Remove the screws that secure the optical drive connector to the computer and remove it from the computer. Installing th ...
-
Dell P45F001 - page 23
Removing the Input/Output (I/0) Board 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. Battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. palmrest assembly 3. Perform the following steps as shown in the illustration: a. Lift the locking tab [1]. b. Disconnect the I/O board cabl ...
-
Dell P45F001 - page 24
Installing the Input/Output (I/O) Board 1. Insert the I/O board into the chassis. 2. Connect the I/O board cable to the system board. 3. Install: a. palmrest assembly b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 4. Follow the procedures in After Working Inside Your computer . Removing the ...
-
Dell P45F001 - page 25
4. Perform the following steps as shown in the illustration: a. Release the speaker assembly from the retention clips [1]. b. Remove the speakers from the chassis [2]. Installing the Speakers 1. Insert the speakers into the chassis and press the retaining clips to lock in place. 2. Connect the speakers to the system board. 3. Install: a. palmrest a ...
-
Dell P45F001 - page 26
h. palmrest assembly . 3. Perform the following steps as shown in the illustration: a. Disconnect speaker and power cable [1]. b. Disconnect display (eDP) cables [2]. 4. Perform the following steps as shown in the illustration a. Lift the locking tab [1]. b. Disconnect I/O cable [2]. c. Disconnect and lift the eDP cable away from the system board [ ...
-
Dell P45F001 - page 27
Installing the System Board 1. Insert the system board into the chassis. 2. Connect the I/O board connector to the system board. 3. Connect the eDP cable to the system board. 4. Connect the speakers to the system board. 5. Connect the power connector to the system board. 6. Tighten the screws to secure the system board to the computer. 7. Install: ...
-
Dell P45F001 - page 28
d. hard drive e. memory module f. keyboard g. palmrest assembly h. system board 3. Unroute the WLAN cable and remove the screws that secure the display panel to the chassis. 4. Place the display panel on a stable surface and lift the bezel from the computer. 5. Remove the screws that secure the display hinges to the display assembly. Then, lift and ...
-
Dell P45F001 - page 29
6. Remove the screws securing the display panel to the display assembly. Then, flip the display panel to access the cables underneath. 7. Perform the following steps as shown in the illustration: a. Lift the eDP cable from the computer [1]. b. Disconnect the eDP cable. c. Remove the display panel from the computer [3]. 29 ...
-
Dell P45F001 - page 30
Installing the Display Assembly 1. Connect the eDP cable to the display panel. 2. Tighten the screws to secure the display panel to the display assembly. 3. Tighten the screws to secure the display hinges to the display assembly. 4. Align and press in the display bezel to the display assembly. 5. Guide the WLAN cables through their tabs and then ti ...
-
Dell P45F001 - page 31
d. hard drive e. memory module f. keyboard g. palmrest assembly h. system board i. display assembly 3. Perform the following steps as shown in the illustration: a. Disconnect the camera cable from the camera. b. Release the retention tab from the display assembly [1]. c. Remove the camera from the display assembly [2]. Installing the Camera 1. Inse ...
-
Dell P45F001 - page 32
Removing the Heatsink 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. Battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. palmrest assembly h. system board 3. Perform the following steps as shown in the illustration: a. Disconnect the system fan’s cable from the system board. ...
-
Dell P45F001 - page 33
e. hard drive f. WLAN card g. access panel h. optical disk-drive i. battery 4. Follow the procedures in After Working Inside Your computer . Removing the Power Connector 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove: a. Battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. palmrest ...
-
Dell P45F001 - page 34
3. Install: a. palmrest assembly b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 4. Follow the procedures in After Working Inside Your computer . 34 ...
-
Dell P45F001 - page 35
3 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardware • View the system hardware configuration • Enable or disable integrated devices • Set performance and power management thresholds • Manage ...
-
Dell P45F001 - page 36
Table 1. Navigation Keys Keys Navigation Up arrow Moves to the previous field. Down arrow Moves to the next field. <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For th ...
-
Dell P45F001 - page 37
Option Description CPU Speed Displays the speed of the processor. CPU ID Displays the processor ID. CPU Cache L1 Cache Displays the processor L1 cache size. L2 Cache Displays the processor L2 cache size. L3 Cache Displays the processor L3 cache size. Fixed HDD Displays the model number and capacity of the hard drive. SATA ODD Displays the model num ...
-
Dell P45F001 - page 38
Option Description Integrated NIC Enable or disable the power supply to the on– board network card. Default: Enabled USB Emulation Enable or disable the USB emulation feature. Default: Enabled USB Wake Support Allows USB devices to wake up the computer from standby. This feature is enabled only when the AC adapter is connected. Default: Disabled ...
-
Dell P45F001 - page 39
The Security tab displays the security status and allows you to manage the security features of the computer. Table 4. Security Options Option Description Unlock Setup Status Admin Password This field displays if an admin password is set for this computer or not (Default: Not Set) System Password This field displays if a system password is set for ...
-
Dell P45F001 - page 40
Exit — This section allows you to save, discard, and load default settings before exiting from System Setup. Updating the BIOS It is recommended to update your BIOS (system setup), on replacing the system board or if an update is available. For laptops, ensure that your computer battery is fully charged and connected to a power outlet 1. Re-start ...
-
Dell P45F001 - page 41
CAUTION: Anyone can access the data stored on your computer if it is not locked and left unattended. NOTE: Your computer is shipped with the system and setup password feature disabled. Assigning a System Password and Setup Password You can assign a new System Password and/or Setup Password or change an existing System Password and/or Setup Password ...
-
Dell P45F001 - page 42
NOTE: If you change the System and/or Setup password, re-enter the new password when promoted. If you delete the System and/or Setup password, confirm the deletion when promoted. 5. Press <Esc> and a message prompts you to save the changes. 6. Press <Y> to save the changes and exit from the System Setup. The computer reboots. 42 ...
-
Dell P45F001 - page 43
4 Diagnostics Enhanced Pre-Boot System Assessment (ePSA) Diagnostics The ePSA diagnostics (also known as system diagnostics) performs a complete check of your hardware. The ePSA is embedded with the BIOS and is launched by the BIOS internally. The embedded system diagnostics provides a set of options for particular devices or device groups allowing ...
-
Dell P45F001 - page 44
Device Status Lights Icon Description Turns on steadily or blinks to indicate battery charge status. Power Status Lights If the computer is connected to an electrical outlet, the battery light operates as follows: Solid yellow light Battery charge is low to critical. Light off (AC adapter connected) Battery is fully charged. Light off (AC adapter d ...
-
Dell P45F001 - page 45
5 Specifications Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (Start icon) → Help and Support , and then select the option to view information about your computer. Table 6. System Information Feature Description Chipset integrated in processor DRAM bus width 64 b ...
-
Dell P45F001 - page 46
Table 9. Audio Feature Description Type 2 channel high-definition audio Controller Realtek ALC3234 Stereo conversion 24-bit (analog-to-digital and digital-to-analog) Interface Intel HDA bus Speakers 2 x 2 W Volume controls program menu and keyboard media-control keys Table 10. Video Feature Description Video type eDP Video Controller: UMA Intel HD ...
-
Dell P45F001 - page 47
Feature Description • two USB 2.0 ports NOTE: The powered USB 3.0 connector also supports Microsoft Kernel Debugging. The ports are identified in the documentation shipped with your computer. Media card reader one 3-in-1 slot Table 14. Display Feature Type 15.6 inches HD WLED Dimensions: Height 224.30 mm (8.83 inches) Thickness 3.2 mm (0.13 inch) ...
-
Dell P45F001 - page 48
Table 17. Battery Feature Description Type • 4-cell “smart” lithium ion (40 WHr) Dimensions: Height 20.00 mm (0.79 inch) Width 49.6 mm (1.95 inches) Depth 272.40 mm (10.72 inches) Weight 0.26 kg (0.57 lb) Life span 300 discharge/charge cycle Voltage • 14.80 VDC (4 cells) Temperature range: Operating 0 °C to 40 °C (32 °F to 104 °F) Non-O ...
-
Dell P45F001 - page 49
Table 20. Environmental Feature Description Temperature: Operating 0 °C to 40 °C (32 °F to 104 °F) Storage –40 °C to 65 °C (–40 °F to 149 °F) Relative humidity (maximum): Operating 10 % to 90 % (non-condensing) Storage 0 % to 95 % (non-condensing) Altitude (maximum): Operating –15.2 m to 3048 m (–50 to 10,000 ft) 0° to 35°C Non-Op ...
-
Dell P45F001 - page 50
6 Contacting Dell Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be avail ...
Do you have a question concerning Dell P45F001?
Use the form below
If you did not solve your problem by using a manual Dell P45F001, ask a question using the form below. If a user had a similar problem with Dell P45F001 it is likely that he will want to share the way to solve it.