English dropdown-ico

Manual Emerson CF945HTW

12 pages 0.22 mb
Download

Go to site of 12

Summary
  • Emerson CF945HTW - page 1

    Part No. F40BP72650000 Form No. BP7265 READ AND SA VE THESE INSTRUCTIONS Model No. CF945WB 00 CF945HTW 00 CF945AB 00 CF945PW 00 CHA TEAU ROY ALE Series Ceiling Fan Owner's Manual ® Net Weight: 33.0 Lbs. LIMITED WARRANTY What The Warranty Covers: This warranty covers the motor and the other components and accessories of your Emerson ceiling fa ...

  • Emerson CF945HTW - page 2

    2 W ARNING ! WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2 . Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on ...

  • Emerson CF945HTW - page 3

    1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. One switch housing c. Five fan blades d. One ceiling cover e. Five blade flanges f. One remote control transmitter g. One remote control receiver h. One hanger ball/downrod assembl ...

  • Emerson CF945HTW - page 4

    IMPORTANT This Owner’s Manual is divided into two sections. The first section, REMOTE CONTROL PROCEDURES, describes how to install the 9-volt alkaline battery (not included) in the remote control transmitter, and how to set the operating frequency of the transmitter and receiver. These instructions must be performed prior to installation of the c ...

  • Emerson CF945HTW - page 5

    Setting Operating Fr equency of T ransmitter and Receiver Your remote control transmitter and receiver have code switches which must be set on one of 16 possible code combinations. The four levers (numbered 1, 2, 3, and 4) on the switches are factory- set in the ON (up) position. Do not use this setting. Change the switch settings as follows: 1. Sl ...

  • Emerson CF945HTW - page 6

    5. Reinstall the hanger ball (Figure 5) on the downrod as follows. Route the two 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin. Securely tighten the setscrew i ...

  • Emerson CF945HTW - page 7

    7 If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 10. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). S ...

  • Emerson CF945HTW - page 8

    8 17. The blade flanges have an interlocking feature that must be fully engaged before tightening the screws. Make sure all the flanges are properly engaged and then tighten the flange screws. If one of the flanges does not seat properly on the motor hub, loosen the adjacent flange screws, re-engage and reseat the flanges, then tighten the screws a ...

  • Emerson CF945HTW - page 9

    9 Installation of the Decorative Suppor t Rods Assembly NOTE: The following procedures are to be performed only if you have installed the 18” (or longer) downrod. 1. Loosen the setscrew in the collar of the rod support assembly using the 5/64” hex wrench (supplied) and slide the support assembly over the downrod (Figure 16). 2. Verify that one ...

  • Emerson CF945HTW - page 10

    10 Operation IMPORTANT Fan installation must be completed, including the installation of the fan blades, before testing of the remote control. Your remote control has full control of your fan and lights. NOTE: Prior to operation of the down light from the remote control, make sure the switch on the light is ON. 1. To set the desired fan speed, pres ...

  • Emerson CF945HTW - page 11

    T r ouble Shooting TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the fan 2. Check line wire connections to fan in the in the ceiling cover. ceiling cover. WARNING: Make sure main power is turned OFF. 3. D ...

  • Emerson CF945HTW - page 12

    Model No. Key N o. Description CF945WB00 CF945HTW00 CF945AB00 CF945PW00 Hanger Ball Assembly, 761655-20 761655-12 761655-3 761655-22 Consisting of: 1 Hanger Bracket — — — — 2 Hanger Ball — — — — 3 Downrod — — — — Parts Bag Containing: 762292 762292-1 762292 762292 4 Wire Connector (3) — — — — 5 Wrench, Hex , 5/64 — ...

Manufacturer Emerson Category Fan

Documents that we receive from a manufacturer of a Emerson CF945HTW can be divided into several groups. They are, among others:
- Emerson technical drawings
- CF945HTW manuals
- Emerson product data sheets
- information booklets
- or energy labels Emerson CF945HTW
All of them are important, but the most important information from the point of view of use of the device are in the user manual Emerson CF945HTW.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Emerson CF945HTW, service manual, brief instructions and user manuals Emerson CF945HTW. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Emerson CF945HTW.

Similar manuals

A complete manual for the device Emerson CF945HTW, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Emerson CF945HTW by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Emerson CF945HTW.

A complete Emerson manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Emerson CF945HTW - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Emerson CF945HTW, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Emerson CF945HTW, that we can find in the current document
3. Tips how to use the basic functions of the device Emerson CF945HTW - which should help us in our first steps of using Emerson CF945HTW
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Emerson CF945HTW
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Emerson CF945HTW in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Emerson CF945HTW?

Use the form below

If you did not solve your problem by using a manual Emerson CF945HTW, ask a question using the form below. If a user had a similar problem with Emerson CF945HTW it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)