English dropdown-ico

Manual AEG F89078VI-M

35 pages 2.59 mb
Download

Go to site of 35

Summary
  • AEG F89078VI-M - page 1

    User’s Manual FAVORIT F89078VI-M 24” Stainless Steel Dishwasher - User’s Manual ...

  • AEG F89078VI-M - page 2

    Rev 0.0 3 C ONTENTS EN Contents 1 INTRODUCTION ....................................................................................................................... 5 2 SAFETY INFORMA TION .......................................................................................................... 7 3 INST ALLA TION MA TERIAL ....................... ...

  • AEG F89078VI-M - page 3

    Rev 0.0 5 INTRODUCTION EN 1 INTRODUCTION Thank you for choosing one of our products. T o install this dishwasher cor - rectly and safely , please read this manual carefully . The manual is divided into sections giving you a step-by-step guide to installation of the appli- ance. The texts are easy to understand and are c omplete with detailed illust ...

  • AEG F89078VI-M - page 4

    6 Rev 0.0 INTRODUCTION EN S ymbols used in this manual (see tab . 1-01) DANGER. This symbol highlights inf ormation and warnings which, if not observed, may compromise personal saf ety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical nature which, if not observed, may compromise pers ...

  • AEG F89078VI-M - page 5

    Rev 0.0 7 W ARNINGS EN 2 SAFET Y INFORMA TION THIS MANU AL FORMS AN INTEGRAL P ART OF THE APPLIANCE AND MUST THEREFORE BE KEPT INT ACT T OGETHER WITH THE MA CHINE. BE FORE USING THE APPLIANCE, CAREFULL Y READ ALL THE INSTRUCTIONS CONT AINED IN THIS MANU AL. INST ALLA TION MU ST BE PERFORMED B Y A QU ALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REG ...

  • AEG F89078VI-M - page 6

    8 Rev 0.0 W ARNINGS EN T WO PEOPLE WEARING SAFETY GL OVES ARE REQUIRED T O LIFT THE DISHW ASHER. DO NO T LEA VING DISCARDED P ACKAGING MA TERIALS UNSUPERVISED WITHIN THE HOME . SEP ARA TE THE V ARIOUS P ACKAGING MA TERI ALS AND T AKE THEM T O THE NEAREST SORTED W ASTE C OLLECTION CENTRE. KEEP CHILDREN, PHYSICALL Y AND/ OR MENT ALL Y IMP AIRED AD ...

  • AEG F89078VI-M - page 7

    Rev 0.0 9 W ARNINGS EN DO NO T USE EXTENSION C ORDS, AD APTORS OR SHUNT CONNECTIONS IN ORDER T O A VOID THE POSSIBILITY OF OVERHEA TING OR BURNING, WITH C ONSEQUENT FIRE HAZARD . THE MANUF ACTURER DECLINES ALL RESPONSIBILIT Y FOR DAM A GE TO PERS ONS, ANIMALS OR PROPERTY RESUL TING FROM F AIL URE TO OBSERVE THE ABO VE PRECAUTIONS , FROM T AMP ...

  • AEG F89078VI-M - page 8

    10 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 3 INST ALL A TION MA TERIAL T o install the dishwasher corr ec tly , the follo wing materials are required: Phillips screw driver (ref . A  g. 3-01); • spirit level (ref . B  g. 3-01); • tape measure (ref . C  g. 3-01); • compass saw (ref . D  g. 3-01); • pencil (ref . E  g. 3-01); ? ...

  • AEG F89078VI-M - page 9

    Rev 0.0 11 INST ALLA TION INSTRUC TIONS EN 3.1 Kit supplied with dishw asher (models F65478VI-S / F89078VI-S ) The kit supplied with the dishwasher comprises: adhesiv e steam guard (r ef . A  g. 3-02); • 1 steel steam guard (r ef. B  g. 3-02);* • 1 template for door panel (r ef. C  g. 3-02); • 2 hooks for door panel (ref . D  g. 3 ...

  • AEG F89078VI-M - page 10

    12 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 4 DIMENSIONS OF DISHW ASHER S ee  g. 4-01) Model A (height) B (width) C (depth) F89078VI-M 86 cm ÷ 91 cm 33-55/64” ÷ 35-55/64” 59.7 cm ÷ 59,9 cm 23-1/2” ÷ 23-37/64” 57 cm 22-7/16” F89078VI-S 86 cm ÷ 91 cm 33-55/64” ÷ 35-55/64” 59.7 cm ÷ 59.9 cm 23-1/2” ÷ 23-37/64” 55 cm 21-2 ...

  • AEG F89078VI-M - page 11

    Rev 0.0 13 INST ALLA TION INSTRUC TIONS EN 5 INST ALL A TION AND HOOKUP DURING INST ALLA TION, T AKE CARE NOT TO INJURE Y OURSELF ON THE SHARP EDGES OF THE APPLIANCE. Remove the polystyrene rack blocks. P osition the appliance in the chosen instal- lation position. The sides and rear of the appliance can lie against kitchen units or walls. If th ...

  • AEG F89078VI-M - page 12

    14 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 5.1 Le veling 5.1.1 Mounting the feet (only for some models) T urn the appliance upside- down (see  g. 5-01). Tighten the nut (see r ef. A  g. 5-01) onto the threaded pin (see ref . B  g. 5-01) of the foot and then  t the supplied washer ; do this on both feet. Screw the feet onto the applianc ...

  • AEG F89078VI-M - page 13

    Rev 0.0 15 INST ALLA TION INSTRUC TIONS EN 5.1.2 Lev elling the appliance Level the applianc e using the relative adjustable feet (e .g.: ref . A  g. 5-02); use an open-ended wrench to rotate the f eet until the dishwasher is per fectly level. Some models are  tted with just one rear foot which can be adjusted with a screw located at the bott ...

  • AEG F89078VI-M - page 14

    16 Rev 0.0 INST ALLA TION INSTRUC TIONS EN Fig . 5-03 A 5.2 Connections Install the dishwasher so as to allow ease of access t o the elec trical and hy draulic connections through the adjacent unit. These connections must never be behind the dishwasher . The inlet and drain hoses can be pointed in all directions. make sur e that they are not bent, ...

  • AEG F89078VI-M - page 15

    Rev 0.0 17 INST ALLA TION INSTRUC TIONS EN A through hole with a diameter of at least 8 cm (5/32”) is requir ed to pass the hoses and power cor d (ref . A  g. 5-05). Make sure there area no r ough edges that could damage the power cor d or hoses. If the dishwasher is installed in a metal unit protect the edge of the through hole for the hoses ...

  • AEG F89078VI-M - page 16

    18 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 5.2.1.1 Connecting to the water tap Connect the inlet hose to a threaded ¾” gas cold water tap ,  tting the supplied  lter (ref . A  g. 5-06). Firmly secur e the hose by tightening the relativ e ring nut with your hands (ref . B  g. 5-06);  nish by tightening another ¼ turn using a pair ...

  • AEG F89078VI-M - page 17

    Rev 0.0 19 INST ALLA TION INSTRUC TIONS EN Do not cut the inlet hose (see  g. 5-07). If the hose is cut, the dishwasher will not work, water will leak and you may be injured. If the hose is too long, wind it up tidily and place it behind the appliance . The cable harness and electrical components must not come into contact with the hydraulic sy ...

  • AEG F89078VI-M - page 18

    20 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 5 .2.1.2 Connecting the drain hose Connecting to a drain Inser t the relative hose int o a drain with a minimum diameter of 4 cm (1-37/64”) (ref . A  g. 5-09); alternativ ely, plac e the hose on the sink (ref . B  g . 5-09) using the supplied hose support (see  g. 5-10), but taking care to a voi ...

  • AEG F89078VI-M - page 19

    Rev 0.0 21 INST ALLA TION INSTRUC TIONS EN Connecting to a “ T” union of the drain circuit MAKE THE C ONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND A T LEAST 400 mm  153/4”  ABOVE THE FL OOR ON WHICH THE DISHW ASHER WILL BE INST ALLED . Connect the dishwasher drain hose (ref . A  g. 5-11) to the “ T ” union (ref . B ? ...

  • AEG F89078VI-M - page 20

    22 Rev 0.0 INST ALLA TION INSTRUC TIONS EN Connecting to a waste disposal unit with an air gap MAKE THE C ONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND A T LEAST 400 mm  153/4”  ABOVE THE FL OOR ON WHICH THE DISHW ASHER WILL BE INST ALLED . Remove the co ver of the waste disposal unit (ref . A  g. 5-12). 1. Connect the dishwa ...

  • AEG F89078VI-M - page 21

    Rev 0.0 23 INST ALLA TION INSTRUC TIONS EN Connecting to the air gap (no waste disposal unit) MAKE THE C ONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND A T LEAST 400 mm  153/4”  ABOVE THE FL OOR ON WHICH THE DISHW ASHER WILL BE INST ALLED . Connect the dishwasher drain hose (ref . A  g. 5-13) to the air gap (r ef. B  g. 1. ...

  • AEG F89078VI-M - page 22

    24 Rev 0.0 INST ALLA TION INSTRUC TIONS EN Connecting to a waste disposal unit (no air gap) MAKE THE C ONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND A T LEAST 400 mm  153/4”  ABOVE THE FL OOR ON WHICH THE DISHW ASHER WILL BE INST ALLED . Remove the co ver of the waste disposal unit (ref . A  g. 5-14). 1. Connect the dishwashe ...

  • AEG F89078VI-M - page 23

    Rev 0.0 25 INST ALLA TION INSTRUC TIONS EN 5 .2.2 Electrical connections and warnings CHECK THA T THE VOL T AGE AND THE FREQUENCY OF THE MAINS MA TCH THE RA TINGS ON THE NAME PLA TE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMA GE T O THE SUPPL Y CORD , HA VE IT RE PLACED B Y THE MANUF ACTURER OR AN A UTHORIZED ...

  • AEG F89078VI-M - page 24

    26 Rev 0.0 INST ALLA TION INSTRUC TIONS EN The plug at the end of the power c ord and the corresponding socket must be of the same type and must conform to current r egulations governing electrical ap- pliances. The plug must be ac cessible after installation. Never remov e the plug by pulling on the wire . If the power cord is damaged, ha ve it re ...

  • AEG F89078VI-M - page 25

    Rev 0.0 27 INST ALLA TION INSTRUC TIONS EN Push the dish washer into position, taking care not to twist or crush the power cord or hoses (see  g. 5-18). T WO PEOPLE WEARING SAFETY GL OVES ARE NEEDED TO PU SH THE DISHW ASHER INT O PLACE. Fig . 5-18 Fig . 5-16 Fig . 5-17 ...

  • AEG F89078VI-M - page 26

    28 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 5.3.2 P roce dure for mounting the door panel Mount the door panel. Place the template on the inner surface of the panel, centering it along the upper side and matching up the ref erence locators (ref . A  g. 5-19); mark the position of the door hooks with a pencil (see  g. 5-19). Remov e the templat ...

  • AEG F89078VI-M - page 27

    Rev 0.0 29 INST ALLA TION INSTRUC TIONS EN Drill holes for the panel handle using a drill with a suitable bit. Use the scr ewdriver to secure the door handle bef ore hooking the panel to the dishwasher (see  g. 5-21). N.B.: the screw s are not supplied. Inser t the door spacers contained in the acc essor y bag (see  g. 5-22). Fig . 5-21 Fig . ...

  • AEG F89078VI-M - page 28

    30 Rev 0.0 INST ALLA TION INSTRUC TIONS EN Attach the door panel:  t the hooks into their slots on the dishwasher and allow the panel to slide downwar ds and slip in to place (see  g. 5-23). 1 2 Secure the door to the panel with the supplied screw s. The panel must have a minimum thickness of 20 mm (25/32”) (see  g. 5-24). Fig . 5-23 Fig ...

  • AEG F89078VI-M - page 29

    Rev 0.0 31 INST ALLA TION INSTRUC TIONS EN Make sure the dish washer door , complete with panel, opens c omfortably and that the base plate (ref . A  g. 5-25) does not prevent it fr om opening fully. If the base plate prevents the door fr om opening, mark out the section to remov e (see  g. 5-25), take out the base plate and cut it along the ...

  • AEG F89078VI-M - page 30

    32 Rev 0.0 INST ALLA TION INSTRUC TIONS EN 5.3.3 C ompletion of installation Finish the cut with a  le (see  g. 5-27) in order to r emove any burrs and/or imper- fections. Put back the base plat e (see  g. 5-28) and try to open the dishwasher door fully; if the base plate still obstruc ts the door , r epeat the above operations. Fig . 5-27 ...

  • AEG F89078VI-M - page 31

    Rev 0.0 33 INST ALLA TION INSTRUC TIONS EN Before securing the dish washer to the adjacent units, attach the gaskets to the sides. Remove the adhesiv e band on the gasket (see  g. 5-29). Fig . 5-29 Fix the gasket t o the dishwasher , inserting it in the seat on the sides towards the front (see  g. 5-30), and making sure that the long side of ...

  • AEG F89078VI-M - page 32

    34 Rev 0.0 INST ALLA TION INSTRUC TIONS EN Fig . 5-31 A Fig . 5-32 shows the state of the dish w asher after the above operations are per- formed. Fig . 5-32 ...

  • AEG F89078VI-M - page 33

    Rev 0.0 35 INST ALLA TION INSTRUC TIONS EN Tighten the supplied scr ews with a screwdriver; this operation de nitively  xes the dishwasher to the adjacent units; c over the side holes using the supplied plugs (ref . A  g. 5-33). A Fig . 5-33 5.4 T esting After installation, test the dishwasher b y star ting a work cycle. Check for leaks an ...

  • AEG F89078VI-M - page 34

    Q - Warran ty AEG produ c ts are d esigned and b u il t to the highest st andards. W e ex pe ct y our ap pliance s to pro vi de many y ea rs of tr ou ble free enjoy ment. In the ev ent of a n ap p liance requ iri ng atte nt ion, each a pp liance is covere d by a 2 year warranty fr om t he date of pu rc has e. Refer to wa rr an ty po li c y for comp ...

  • AEG F89078VI-M - page 35

    AEG appliances ar e imported and distributed in North America by Euro-Line Appliances Inc. For mor e information visit www .eur o-line-appliances.com / www .elawest.com 871 Cranberry Court Oakville, ON L6L 6J7 Canada T oll Free: 1.800.421.6332 Showroom: 905.829.3980 marketing@euro-line-appliances.com 2912 W est 4th Ave V ancouver , BC V6K 1R2 Canad ...

Manufacturer AEG Category Dishwasher

Documents that we receive from a manufacturer of a AEG F89078VI-M can be divided into several groups. They are, among others:
- AEG technical drawings
- F89078VI-M manuals
- AEG product data sheets
- information booklets
- or energy labels AEG F89078VI-M
All of them are important, but the most important information from the point of view of use of the device are in the user manual AEG F89078VI-M.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals AEG F89078VI-M, service manual, brief instructions and user manuals AEG F89078VI-M. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product AEG F89078VI-M.

Similar manuals

A complete manual for the device AEG F89078VI-M, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use AEG F89078VI-M by users. Manuals are usually written by a technical writer, but in a language understandable to all users of AEG F89078VI-M.

A complete AEG manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual AEG F89078VI-M - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the AEG F89078VI-M, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the AEG F89078VI-M, that we can find in the current document
3. Tips how to use the basic functions of the device AEG F89078VI-M - which should help us in our first steps of using AEG F89078VI-M
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with AEG F89078VI-M
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of AEG F89078VI-M in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning AEG F89078VI-M?

Use the form below

If you did not solve your problem by using a manual AEG F89078VI-M, ask a question using the form below. If a user had a similar problem with AEG F89078VI-M it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)