English dropdown-ico

Manual RCA VR642HF

40 pages 1.1 mb
Download

Go to site of 40

Summary
  • RCA VR642HF - page 1

    USER’S GUIDE VR642HF VIDEO CASSETTE RECORDER ...

  • RCA VR642HF - page 2

    i Introduction WARNING To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Attention: Pour Žviter les chocs Žlectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser j ...

  • RCA VR642HF - page 3

    Introduction T able of Contents 1 Important Infor mation Warnings ______________________________ i Cautions ______________________________ i Note to Cable TV Installer _______________ i Product Registration ____________________ i Hooking Up the VCR Choosing a Hookup ____________________ 2 Antenna or Cable System Without a Cable Box ________________ ...

  • RCA VR642HF - page 4

    2 Hooking Up the VCR Choosing a Hookup The hookups on pages 3 through 5 are divided into two hookup types: Basic (A) and Advanced (B). The basic hookup shows the backs of TVs that have only an antenna/cable connection. It is the easier of the two and additional accessories may not be needed. The advanced hookup shows the VCR hooked up to a TV with ...

  • RCA VR642HF - page 5

    A. Basic hookup. Use this hookup for a simple connection which requires fewer accessories. 1 . Set the 3CH.4 switch on back of VCR to either channel 3 or 4. Tune the TV to this channel and use the TV•VCR button to watch the VCR. 2 . Connect as shown. This connection may require additional accessories not provided. 3 . Plug in power cords of VCR a ...

  • RCA VR642HF - page 6

    4 Hooking Up the VCR Cable System With Cable Box to Unscramble All Channels OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 Back of VCR R L OUT OUT IN Cable Box From Cable RF Coaxial Cable Back of TV Cable/ Antenna OR VHF UHF RF Coaxial Cable (supplied) 75 to 75/300 Ohm Separator OUT IN Cable Box From Cable RF Coaxial Cable S-VIDEO AUDIO CA ...

  • RCA VR642HF - page 7

    A. Basic hookup. Use this hookup for a simple connection which requires fewer accessories. 1 . Set the 3CH.4 switch on back of VCR to either channel 3 or 4. Tune the TV to this channel and use the TV•VCR button to watch the VCR. 2. Connect as shown. This connection may require additional accessories not provided. 3 . Plug in power cords of VCR, T ...

  • RCA VR642HF - page 8

    6 Hooking Up the VCR Connecting T wo VCRs for Copying T apes OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 R L OUT OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 R L OUT Playback VCR RF Coaxial Cable (supplied) Recording VCR Audio/Video Cables RF Coaxial Cable or Use the hookup to the TV as previously selected on pages 3, 4, or 5 ...

  • RCA VR642HF - page 9

    7 Hooking Up the VCR Connecting a Ster eo Amplifier/Receiver LEFT RIGHT PHONO TUNER TAPE AUX REC PLAY OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 Back of VCR R L OUT Back of Amplifier/Receiver Audio/Video Cables LEFT RIGHT PHONO TUNER TAPE AUX REC PLAY OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 IN AUDIO1 VIDEO1 Back of VCR R L OUT Back of A ...

  • RCA VR642HF - page 10

    8 Setting Up the VCR 1. Check accessories with VCR. Contact your dealer if any items are missing. 2. Insert batteries in remote. 3. T urn on the TV . If you used one of the basic hookups, tune the TV to the channel selected with the 3CH.4 switch on back of VCR. If you used one of the advanced hookups, tune the TV to the TVÕs video input. (See TV o ...

  • RCA VR642HF - page 11

    9 5. Place channels in the VCR’ s memory . The first time you turn on the VCR or after a power interruption, the VCR displays a message on the TV screen prompting you to perform the AUTO CHANNEL SEARCH . If the message does not appear, go to step A below. If the message appears, follow the directions on the screen. Wait until the channel numbers ...

  • RCA VR642HF - page 12

    Setting Up the VCR Star tup 7. Select the language/Seleccione el idioma/ Sélectionner la langue. The VCR displays the on-screen menus in the English, Spanish or French language. The word ÒLanguageÓ cycles through the different languages when the VCR Main Menu is displayed on the TV screen. A . Press MENU on remote to display the VCR MAIN MENU . ...

  • RCA VR642HF - page 13

    11 Setting Up the VCR Star tup 10. Set the Time and Date. The TIMER indicator on the VCR front panel flashes until the time is set. A . Press MENU on remote to display the VCR MAIN MENU . B . Press 2 to display the TIME menu. C . Press 1 to display SET TIME AND DATE . D . Enter the time and date with the number buttons on the remote. ¥ Press 0 bef ...

  • RCA VR642HF - page 14

    12 Setting Up the VCR Star tup 1 2. Set the display panel brightness. This VCR lets you change the brightness level of the fluorescent display panel. A . Press MENU on remote to see the VCR MAIN MENU . B . Press 4 to display the PREFERENCES menu. C . Press 4 to select a FRONT PANEL mode. ¥ Select AUTO to keep the display panel bright when VCR is o ...

  • RCA VR642HF - page 15

    13 Using the Remote Contr ol VCR Function Buttons CLEAR MENU SPEED INPUT F. ADV TRACKING STOP PLAY 1 2 3 5 4 6 7 9 8 0 PAUSE SLOW SEARCH REC FF REW CHAN POWER DISPLAY TV•VCR PREV CH CHAN (CHANNEL) Up or Down Selects the next higher or lower channel in the VCRÕs channel memory. CLEAR Resets the time counter to 0:00:00 . Lets you change entries wh ...

  • RCA VR642HF - page 16

    T o play a tape 1 . Turn on the TV and tune it to channel 3, 4, or the TVÕs video input to see the picture from the VCR. 2 . Insert a tape in the VCR. The VCR automatically turns on. The cassette-in indicator ( ) lights, and the VCR indicators light (if the AUTO TV/VCR feature is turned ON) . The tape automatically begins playback if the safety ta ...

  • RCA VR642HF - page 17

    15 Using the Playback Featur es Playing a T ape AUTO PLA Y Feature This feature allows the VCR to automatically start playing when you insert a tape with the safety tab removed. 1 . Press MENU on the remote to display the VCR MAIN MENU . 2 . Press 4 to display the PREFERENCES menu. 3 . Press 2 to select AUTO PLAY: ON or OFF. ¥ Select ON if you wan ...

  • RCA VR642HF - page 18

    16 Using the Playback Featur es DISPLA Y Button The DISPLAY button shows the status of the VCR channel number, time counter, date, time and tape speed on the TV screen. The time and date must be set before they can be displayed. 1. Press DISPLAY . If you do not press DISPLAY again, this display times out. 2. Press DISPLAY again to display only the ...

  • RCA VR642HF - page 19

    17 Using the Playback Featur es Index Search The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on the tape every time you begin recording a program. Your VCR has two index playback features. To locate the program you want to play, select a specific index number or search by scanning. Some index marks may be missed b ...

  • RCA VR642HF - page 20

    18 Blank Search The VCR searches for blank portions of the tape that are more than six seconds long. 1 . Insert the prerecorded tape. Press STOP . 2 . Press SEARCH three times to display the BLANK SEARCH menu. 3 . Press FWD on the VCR or FF on the remote to begin searching for six seconds of blank tape. A message appears on the screen if a blank ar ...

  • RCA VR642HF - page 21

    19 Pause for Stop Action This feature stops the tape in action and lets you examine the details of the scene. Stop action works best for tapes recorded in the SP or SLP speed. 1 . Press PAUSE on the remote or PLAY•PAUSE on the VCR during playback to stop the action. The pause indicator ( ) appears in the VCRÕs display panel. 2 . Press TRACKING u ...

  • RCA VR642HF - page 22

    20 Playing a T ape Using the Playback Featur es T APE PLA YBACK: HI-FI/LINEAR/MIX Feature The VCR records the same audio on both the Hi-Fi and linear tracks on the tape. The Hi-Fi sound is recorded on separate left and right stereo channels. Mono sound is recorded on the linear track. To enjoy Hi-Fi sound, connect your VCR to a stereo television or ...

  • RCA VR642HF - page 23

    21 Recording and Playback Feature COMMERCIAL ADV ANCE™ COMMERCIAL ADVANCEª is a patented technology that detects and marks most commercials on your tape for any recording that is more than 15 minutes long. During playback, the VCR automatically skips the detected commercial segments or you can choose to manually skip them. This feature reduces t ...

  • RCA VR642HF - page 24

    22 Recording and Playback Feature T o Select a Background for Playback 1. Press MENU to display the VCR MAIN MENU . 2. Press 4 to display the PREFERENCES menu. 3. Press 7 to select CA DISPLAY: BLUE or VIDEO. ¥ Select BLUE to have the VCR display a blue screen while it advances through the block of marked commercials. ¥ Select VIDEO to have the VC ...

  • RCA VR642HF - page 25

    23 Recording a Program Your VCR provides different recording options. These options are explained in this section of the manual. Recording Speeds Press SPEED on the remote to select a recording speed (SP or SLP). The speed you select appears on the TV screen. Tapes recorded in LP can be played in this VCR. SP (Standard Play) gives the best quality ...

  • RCA VR642HF - page 26

    24 Express recording lets you record up to four hours without using the timer program feature. The VCR turns off automatically at the end of the recording. 1. Turn on the VCR. 2. Insert a tape with its safety tab in place. 3. Select the channel you want to record. 4. Use SPEED on the remote to select a recording speed. 5. Press REC on the remote or ...

  • RCA VR642HF - page 27

    VCR MAIN MENU 1 TIMER RECORDINGS 25 TIMER RECORDINGS 1 CREATE A NEW PROGRAM HOW OFTEN SHOULD THIS PROGRAM RECORD? 1 ONE TIME Recording a Program Recor ding While Y ou’r e Away (Timer Recor ding) The timer program feature lets you program the VCR to record up to eight different programs within a one year period. Before setting the timer, make sure ...

  • RCA VR642HF - page 28

    VCR MAIN MENU 1 TIMER RECORDINGS 26 Recording a Program Timer Recording Fr om the VCR’ s Line Input The line input refers to the signal coming from the AUDIO1 and VIDEO1 IN jacks of the VCR. Recording from the line input is convenient if you have a satellite receiver or similar component attached to these jacks. To timer record from the component ...

  • RCA VR642HF - page 29

    VCR MAIN MENU 1 TIMER RECORDINGS 2 TIME 3 CHANNELS 4 PREFERENCES 5 AUDIO 27 Recording a Program T o Record Ster eo Broadcast TV or SAP Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TVÕs video input. 1 . Insert a tape with its safety tab in place. 2 . If you are using one of the basic hookups, make sure the VCR indicato ...

  • RCA VR642HF - page 30

    28 Recording a Program Recor ding Audio T o Record Audio Only (Refer to hookup on page 7.) 1. Press the INPUT button or 0,0 on the remote to hear the source attached to the AUDIO jacks. VIDEO appears on the TV screen. The VCR records audio from the audio equipment connected to the AUDIO1 (L and R) IN jacks. 2 . Use SPEED on the remote to select the ...

  • RCA VR642HF - page 31

    29 Recording a Program Using T wo VCRs for Copying and Editing T apes Operating Instructions (Refer to hookup on page 6.) Use one VCR as the playback VCR and the other as the recording VCR. 1. Turn on the TV and VCRs. 2. Tune the TV to the VCR viewing channel, either 3, 4, or the TVÕs video input. 3. If you connected your VCR using Option A (page ...

  • RCA VR642HF - page 32

    30 CHANNEL POWER TV•VCR TRACKING RECORD REW FWD STOP•EJECT PLAY•PAUSE VCR H i-F i References Location of Contr ols CHANNEL or TRACKING up or down Selects next higher or lower channel in the VCRÕs channel memory. Adjusts tracking during playback. FWD (Fast Forward) Fast forwards the tape when the VCR is stopped. Searches the picture forward d ...

  • RCA VR642HF - page 33

    31 References Location of Contr ols Cassette-in Indicator ( ) Lights when a tape is in the VCR. Hi-Fi Indicator Lights when the AUDIO PLAY feature is set to HIFI or MIX . POWER Indicator Lights when power is turned on. SAP Indicator Lights when the station you are tuned to is broadcasting Second Audio Program. Status Indicators Show what the VCR is ...

  • RCA VR642HF - page 34

    32 References Format: VHS Record/Playback Video: 4-Head System: Audio: VHS Hi-Fi Stereo record/playback system Video Signal System: EIA standard: NTSC color Antenna: 75-ohm external VHF/UHF combined antenna terminal Tuner: USA: 181 channels capability* (125 cable channels) Canada: 178 channels capability* (122 cable channels) Type: AutoProgramming ...

  • RCA VR642HF - page 35

    References 33 Questions & Answers About COMMERCIAL ADV ANCE™ Question Answer Will commercials be scanned through only on playback of recordings? How fast does the COMMERCIAL ADVANCE™ VCR scan through the commercial breaks? Are commercials still recorded if I want to watch them? What if the VCR scans forward through part of my program? Once ...

  • RCA VR642HF - page 36

    34 References T r ouble Checks Sometimes problems can be easily solved by checking a few basic things. Check below before you call for help or take your VCR to an Authorized RCA VCR Servicenter. N o power VCR does not respond to remote Poor or no picture for normal TV viewing Snowy or no picture during playback Streaks in picture during normal play ...

  • RCA VR642HF - page 37

    35 References T r ouble Checks T rouble Here's what to tr y: Stereo audio too noisy Stereo or SAP sound not recorded Rewind does not operate Timer recording not made or wrong program recorded Incorrect time or date Time did not adjust for daylight savings VCR makes noise when stopped Will not AutoChannel Search correctly Cannot select channels ...

  • RCA VR642HF - page 38

    36 References Limited W arranty What your warranty covers: ¥ Any defect in material or workmanship. For how long after your purchase: ¥ Ninety days for labor charges. ¥ One year for parts. The warranty period for rental units begins with the first rental or 45 days from the date of shipment to the rental firm, whichever comes first. What we will ...

  • RCA VR642HF - page 39

    37 References Index 3CH.4 Switch ......................................3-9,32 Accessories, Included ................................8 Add or Remove Channels from Memory 9 ADD/REMOVE CHANNEL Menu ............9 ALERT SOUND Feature ..........................11 Amplifier/Receiver Connections .............7 Antenna Connections .......................... ...

  • RCA VR642HF - page 40

    For your nearest Home Entertainment Dealer or Authorized Servicenter call toll-free in the U.S.A. 1-800-336-1900 Canadian Consumers – Your toll free numbers are: English: 1-800-522-0338 French: 1-800-522-0445 Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only add delays in service fo ...

Manufacturer RCA Category Cassette Player

Documents that we receive from a manufacturer of a RCA VR642HF can be divided into several groups. They are, among others:
- RCA technical drawings
- VR642HF manuals
- RCA product data sheets
- information booklets
- or energy labels RCA VR642HF
All of them are important, but the most important information from the point of view of use of the device are in the user manual RCA VR642HF.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals RCA VR642HF, service manual, brief instructions and user manuals RCA VR642HF. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product RCA VR642HF.

Similar manuals

A complete manual for the device RCA VR642HF, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use RCA VR642HF by users. Manuals are usually written by a technical writer, but in a language understandable to all users of RCA VR642HF.

A complete RCA manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual RCA VR642HF - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the RCA VR642HF, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the RCA VR642HF, that we can find in the current document
3. Tips how to use the basic functions of the device RCA VR642HF - which should help us in our first steps of using RCA VR642HF
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with RCA VR642HF
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of RCA VR642HF in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning RCA VR642HF?

Use the form below

If you did not solve your problem by using a manual RCA VR642HF, ask a question using the form below. If a user had a similar problem with RCA VR642HF it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)