-
BenQ P330 - page 1
Welcom e Joybee P 330 Digital Audio Player User.s Manual ...
-
BenQ P330 - page 2
Welcom e Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded,stored in a retrieval system, or translated into any language or computer language, in any form or by a ny means, electronic or mechanical, recording, photocopying, or otherwise,without the prior written permission of the BenQ Corporation. D ...
-
BenQ P330 - page 3
3 Important information FCC compliance This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference to radio or television reception. This device generates, uses, and can radiate radio freque ...
-
BenQ P330 - page 4
4 handed over to the applicable take - back scheme for the recycling of electrical and electronic equipment. By ensuring this product is disposed on correctly, you will help prevent potential negati ve consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of ...
-
BenQ P330 - page 5
5 Force shutting down the Player …………………………… ..13 Using Joybee P330 as digital audio Player ………………… ..14 Playing the music files ………………………………… .. … ..14 Using the recording functions ………………… .. ………… ..25 Playing the recorded files …………………… . …… ...
-
BenQ P330 - page 6
6 ...
-
BenQ P330 - page 7
7 Precautions u Do not place the Player in places with too high/ low temperature or damp. u Do not let any object drop or impact onto the Player. u Avoid using the Player in places with too much dust or soot. u Do not use chemicals such as alcohol and benzene attenuant . u Never disassemble, fix or modify the Player. u Do not impact onto the LCD of ...
-
BenQ P330 - page 8
8 BenQ Joybee P330 Digital Audio Player Introduction Thank yo u for purchasing the BenQ Joybee P330 Digital Audio Player. In this manual, you will find all the information about your player, including instructions . Please read this manual carefully in order to make the best use of your player. System requirements S ystem requirements: . Microsoft ...
-
BenQ P330 - page 9
9 Package contents Please check the contents of the packaging. Should any part be missing or damaged, please contact your dealer immediately The parts illustrated may differ slightly in appearance from those supplied. Basic package Setup CD - ROM USB Connecting ? ...
-
BenQ P330 - page 10
10 Gettin g to know your Joybee P330 Digital Audio Player Earphone EQ LCD Mic A - B Play Five - key USB mini Connect ON/OFF ...
-
BenQ P330 - page 11
11 Key definition PLAY : Turn On, Turn Off, Play, Pause, and Stop. MODE: Switching Working Mode, Menu Options, Interf ace Switching. NEXT : Move to Right, Forward LAST : Move to Left, Backward VOL+: Volume Increasing, Last Item VOL - : Volume Decreasing, Next Item A - B/REC: Special A - B / Recording Hot Button EQ: When playing MP3 musical file ...
-
BenQ P330 - page 12
12 The Joybee N200 Digital Audio Player menu map Main menu PIC Play REC Voi ce REC Video Music FM E - Book Setting Clock LCD set Language Power off Replay mode Memory info Firmware version Firmware upgrade Repeat Equalizer Tempo Replay Replay times Replay gap ...
-
BenQ P330 - page 13
13 Getting Started Charging the player The player offers about 2 0 hours of continuous MP3 playtime when the battery is new and fully charged. The exact playtime is subject to battery age and condition, and the format of the files bein g played. Exact charging time differs according to battery status, which is indicated in the battery bar on the pl ...
-
BenQ P330 - page 14
14 Turning the player on and off ・ To turn on th e player, press and hold play key for 3 seconds when the power key is on . The player enters the last mode when it was turned off. ・ To turn on the player, press and hold play key for 3 seconds Locking the keys To avoid any accidental key touch es which may cause unexpected ...
-
BenQ P330 - page 15
15 Using BenQ Joybee P330 as digital audio player Playing the music files Select t he “ Music ” in the main menu, enter the music files playback interface. The Musical File Playback function realize the playback of musical files in MP3 and WMA formats along with the features of repeating, following and contrasting. It has the interfaces of s to ...
-
BenQ P330 - page 16
16 represents that the current song has its lyric. “ M y Heart Will Go On ” is the name of the song. If the song does not hav e a Tag, then its file name will be displayed here. “Celine Dion” is the name of the singer. Button Function in the Stop Interface l Long - Press of MODE: Enter into the main menu. l Short - Press of MODE: Enter into ...
-
BenQ P330 - page 17
17 In this interface, press MODE to enter into the Deleting Ways selection interface. Button Function in the Deleting Interface l Long - Press of PLAY: Turn the player off. l Short - Press of PLAY: Return to the Stop Interface. l Short - Press of A - B: Switch to the recording interface and start recording. Directory Selection Interface You can sel ...
-
BenQ P330 - page 18
18 next directory one by one. The selection strip scrolls in a way of two lines. l Short - Press or Long - Press of “ Vol+ ” : The selection strip switches to the last directory one by one. The selection strip scrolls in a way of two lines. l A short - pres s of MODE will select the directory and return to the Stop interface. If the current dir ...
-
BenQ P330 - page 19
19 l Short - Press of A - B: Enter into the Repeat interface and confirm the A point. One more short - press of A - B will confirm the B point and start repeating the segment between A and B. Playing M enu Interface Note: This interface provides the user with the following options: ① Repeat : To set the ways for playing songs. ② Equalizer : To ...
-
BenQ P330 - page 20
20 C urrent directory, it will continue to play the songs in the next directory . Repeat One: Repeat playing the current song. Play Folder : The player will stop if it finishes playing the songs in the current directory. Repeat Folder : Repeat playing the songs in the directory. Repeat All: Repeat playing the songs in all directories. Random : Play ...
-
BenQ P330 - page 21
21 Manual Repeat Operation When yo u enter Manual Repeat, the “ A ” in will flash. u A short - press of NEXT or A - B will set the “ A ” point, and then “B” will flash. u A short - press of NEXT or A - B will set the “B” point. Then the segment between “ A ” and “B” will play repeatedly. u After a shor t - press of LAST or A ...
-
BenQ P330 - page 22
22 ③ In all the steps above, a short - press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Auto Repeat Operation u When you enter Auto Repeat, the “ A ” in will flash. u A short - press of NEX T/ A - B will set the “ A ” point, and then “B” will flash. u If the player finds a blank ...
-
BenQ P330 - page 23
23 ③ In all the steps above, a short - press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. Tempo rate Setting Interface Note: You can set the current playing speed in here. This will affect the playing of musical files in the MP3 format. However, this will not affect the files in WMA format. R ...
-
BenQ P330 - page 24
24 Lyrics Show Interface Note: When you enter into the Lyrics Show interface, the current song continue to play and the corresponding lyrics will display according to th e playing progress of the song. When the playing of the song is over, the player will run the subsequent song playing functions according to the Playing mode set. If the subsequent ...
-
BenQ P330 - page 25
25 lines. Each line has 7 Chinese characters. n When the song is playing, its lyrics will be highlighted, and the next sentence of the lyrics will wait in the other part. The waiting lyrics will be highlighted when its time comes. The next sentence will be displayed in the part where the last sentence has finished its presence. Whereas the time in ...
-
BenQ P330 - page 26
26 Using the recording functions Select the “ Voice REC ” in the main menu, enter the recorder interface. In this interface, it r ealize recording sound files of WAV and ACT format. It has the following interf aces: s top, r ecording, p ause and d irectory s election. l 00:00:03 indicates the progress of the recording. In the Stop interface the ...
-
BenQ P330 - page 27
27 The Stop Menu Interface Note: You can select Local folder , REC Types and Exit in here. When you enter into this interface, the enabled position is the o ne where you quit last time. Local folder Selection Interface Note: Here, you can select any directory as your current recording directory. When you enter into the recording interface, you will ...
-
BenQ P330 - page 28
28 The Recording Interface Note: When you enter into the Recording interface, a new recording file will be generated, and the recording will start in a current coding ways. The scrolling bar indicates that the player is in recording. It al so indicates the progress of the current recording. Long press play key to save the file. Button Function in t ...
-
BenQ P330 - page 29
29 will be saved, and then the player will return to the Stop interface. The Pause Interface When you enter into the Pause interface, the Pause status will be displayed and user ’ s operations are wanted. In this case, 00:00:03 will flash at the rate of once per second. Button Function in the Pause Interface u Short - Press of PLAY/A - B: To retu ...
-
BenQ P330 - page 30
30 Playing the recorded files Select the “ Play REC ” in the main menu, enter the inter face of playing the recorded files. Realize the playback of *.WAV and *.ACT files. It has the following interfaces: Playing, Local folder Selection, Dele te , as well as function selection and settings interfaces. Functions in the Stop Interface Note: When y ...
-
BenQ P330 - page 31
31 l Short - Press of LAST: To switch to the last recorded file in the current directory and reset the time point to zero. l Long - Press of LAST: To cycle to the last recorded files and reset the time point to zero. l Short - Press of NEXT: To switch to the next recorded file in the current direct ory and reset the time point to zero. l Long - Pre ...
-
BenQ P330 - page 32
32 one by one. The selection strip scrolls in a way of two lines. l Short - Press of MODE: To select the selection strip and return to the Stop interface. When you switch to a new directory, the resume playing memory will be cleared. l Short - Press of PLAY: To quit to the Stop Interface. l Long - Press of PLAY: To turn the player off. l Short - Pr ...
-
BenQ P330 - page 33
33 The “REC01 2004/01/01 10:23” is scrolling hori zontally when the file is playing, Button Function in the Playing interface l Short - Press of MODE: To enter into the Playing menu interface. l Short - Press of PLAY: To enter into the Stop Interface. l Long - Press of PLAY: To turn the player off. l Short - Press of NEXT: To jump to next file ...
-
BenQ P330 - page 34
34 Note: You can select Repeat Mode for playing songs in here. The music is still playing. It is the same as the interface when playing music. Repeat Interface Note: You can perform the repeat function here. Repeat Operation u When you enter the Repeat functi on, the “ A ” in will flash. u A short - press of NEXT will set the “ A ” point, a ...
-
BenQ P330 - page 35
35 Liste ning to FM radio Select the “ FM ” in the main menu, enter the FM interface. Each time when you enter into this function, you are in the playing mode. You need to restore the current prestored radio stations to play. The first time you enter this function th e frequency of the current radio station is the minimum one. : The current fre ...
-
BenQ P330 - page 36
36 play its program. If its frequency is the same as the one prestored, then its channel number will display. A short - press o f LAST will move the frequency backward at a step of 100KHz for fine - tuning. u Short - Press of “ Vol+ ” or ” Vol - ” will adjust the volume. u Long - Press of MODE: To enter into the main menu. u Short - Press o ...
-
BenQ P330 - page 37
37 l Long REC: To record the radio progra m you are now listening in act format . l Exi t: To quit the menu. Sav e Note: Save the frequency to a new preset channel number. If the frequency is just the saved one that is fine tuned, then it will be saved to the current channel number. Delet Note: If you want to delete the current saved radio station, ...
-
BenQ P330 - page 38
38 Browsing the JPEG/BMP/GIF pictures Select the “ PIC ” in the main menu, enter the picture browsing interface. Realize viewing of JPEG, BMP, GIF pictures. Common formats are supported. File Selection Status A press of Play will enter into the Picture Playing status. u Press ” Vol - ” or “ Vol+ ” to select the next/last file. u A press ...
-
BenQ P330 - page 39
39 Playing the AMV files Select the “ Video ” in the main menu, enter the interface of playing AMV files. The *.AMV files could be playback in this function(the *.AMV files can be convert ed by using the software which in the CD). Button Function l Short - Press of MODE: Enter into the Playing menu interface. l Long - Press of MODE: S top playi ...
-
BenQ P330 - page 40
40 Browsing the E - book Select the “ E - Book ” in the main menu, enter the interface of viewing txt files. File Selection Status When you enter from the main menu, you are at the fi le selection status. Press the PLAY button, begin to read the selected text file. u Press “ Vol - ” or “ Vol+ ” to select the next/last file. u A press of ...
-
BenQ P330 - page 41
41 u A short - p ress “ LAST ” or “ NEXT ” to select the last page/next page u A short – press of Play will return to the File Selection status. u Long - Press of MODE: To enter into the main menu. u Other buttons are disabled. ...
-
BenQ P330 - page 42
42 System setup Note: This is mainly used for the setting of system - related parameter and status display. These settings include: Clock , LCD Set, Language, Power off , Replay Mode , Memory Info , Firmware Ver sion , Firmware Upgrade and Exit Menu. Interface Display After you finish setti ng each of these functional interfaces, you will still be ...
-
BenQ P330 - page 43
43 recording. The Setting Procedure u 2003 flashes(2HZ) u Hold - on of NEXT will increase the year number step by step. u Hold - on of Last will decrease the year number step by step. u A short - press of “ Vol+ ” will confirm the year number. Then the setting item will be switched to Month, whose setting method is the same as the t hat of Year ...
-
BenQ P330 - page 44
44 Power off Button Function l A short - press of “ Vol - “ or “ Vol+ ” will switch between the two modes. l A short - press of MOD E will select and enter the Energy Saving Mode or Sleeping Mode. l A short - press of PLAY will cancel the setting and quit. Off time Note : In this mode, you can set the Auto Off , that is, in the Stop status, ...
-
BenQ P330 - page 45
45 Rep lay Note: In here, you can set the working status for the repeat function. One is Manual, the o ther is Auto. It is the same as the Power o ff Setting interface. Button Function l A short - press of “ Vol - “ or ” Vol+ ” will switch between the two modes. l A short - press of MODE will confirm and quit. l A short - press of PLAY will ...
-
BenQ P330 - page 46
46 Using BenQ Joybee P330 as a flash disk Realize the standard USB DISK functions. Except the UPGRADE module, in other status, when inserted into the USB Port, the player will enter into the Udisk function. Interface Display There are three status: Ready, Download and U pload. Ready means that the UDISK is ready to use. Download means that the UDis ...
-
BenQ P330 - page 47
47 u In Ready m ode, a short - press of MODE will switch to the MUSIC mode. u Short - Press of A - B: Switch to the recording function and start recording. Ejection When PC is ejected (without pulling out the player from the PC), the player will go into the main menu automatic ally. Switch to UPGRADE When receiving the command of switching to UPGRA ...
-
BenQ P330 - page 48
48 Advanced operation BenQ Joybee P330 Notice: Before install the software, be sure of that the Media Player9(or above) and the DirectX9 have been installed in your PC. After the installation, you can find the program in the “ start ” : AMV Convert Tool ： It could convert the other video formats to .mtv format, whic h could be played in the m ...
-
BenQ P330 - page 49
49 Click the button of ① , select the files which need to be converted; click the button of ② , select the path of the .amv files(you could not change the name of the file) Click the button of ③ , select the settings of the file which will be converted. ...
-
BenQ P330 - page 50
50 You can select: Fram es per second of the AMV files: “ low 、 middle 、 high ” After finishing the settings, click the “ OK ” button, it will return the main figure. (Notice: every time when the software reset, all the settings will return default) Click the button of ⑤ , the software will begin to work: ...
-
BenQ P330 - page 51
51 When the work finished, the figure will be shown as below: Click the “ OK ” button, the conversion will be finished. You can find the .amv files in the path you have appointed. ...
-
BenQ P330 - page 52
52 About the formats: If your Media Player co uld not playback the source video(click the button of ④ in the main figure , it could not playback normally) , you should install the more decoders, or the software will not work successfully. AMV Player Select the “ AMV Player ” , the figure will be shown as below: The AMV Player will playback th ...
-
BenQ P330 - page 53
53 Connect the MP3 player to the PC, enter the firmware upgrade interface, then click the program “ MP3 Player Upgrade Tool ” . Click the “ Selec t new firmware file ” to select the firmware you need, then click the “ Begin upgrade ” button. When the progress end, the upgrade is successful. Sound Convert Tool Select “ Sound Convert To ...
-
BenQ P330 - page 54
54 The tool is designed for fo rmat conversion from rcd/rec/act to WAV for recording files , with the function of files playback in WAV, MP3 format files included. Uninstall Select “ Uninstall ” , it will uninstall the software: ...
-
BenQ P330 - page 55
55 Troubleshooting 1. Push the play for 3 seconds, there is no display on the screen. Please check the following: The battery is no power left, or the ON/OFF switch is not put on the “ ON ” position. 2 . The mess timing display on the screen when playbacking some songs. Please check the following : At the moment, the Mp3 file is compressed ...
-
BenQ P330 - page 56
56 relevant software to recompress the song ’ s file into a standard one. Remark: To confirm the song ’ s file , you can connect the MP3 player to PC, to check the file information by the playback tool in the computer (e.g: Winamp) 5 . No sound when playing a file. Please check the following: The volume is too low, or the device is conn ...
-
BenQ P330 - page 57
57 format) 10 . Why my PC can ’ t use the Video converting software installed in the player? Please check the following: If your computer is installed “ Windows 20 00 ” , please install the “ DirectX9 ” software, which you may find in the CD we attached in the accessories . Technical Specifications LCD 65K 96*64 OLED full - color ...
-
BenQ P330 - page 58
58 <Memo> ...
-
BenQ P330 - page 59
59 ...
Do you have a question concerning BenQ P330?
Use the form below
If you did not solve your problem by using a manual BenQ P330, ask a question using the form below. If a user had a similar problem with BenQ P330 it is likely that he will want to share the way to solve it.