-
Planet WNAP-C3220 - page 1
...
-
Planet WNAP-C3220 - page 2
Copyright Copyright 2014 by PLANET T echnology Corp. All right s rese rve d. No part of this publication may be reproduced, transmitted, transcri bed, st ored in a retrieval system, or translated into any language or computer language, in any form or by any means, electro nic, mechanical, magnetic, optical, chemical, manual or otherwise, withou ...
-
Planet WNAP-C3220 - page 3
Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC rad iation expos ure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio freque ncy exposure limits, human prox imity to the antenna shall not be less than 20 cm (8 in ches) during normal operation ...
-
Planet WNAP-C3220 - page 4
Revision User Manual for PLANET 300Mbps 802.11 n Wireless Ceiling Mount AP/ Range Exte nder Model: WNAP-C3220 Rev: 2.0 (July, 2014) Part No. EM-WNAP-C3220v2_v2.0 ( 2081-E104 00-003 ) III ...
-
Planet WNAP-C3220 - page 5
CONTENTS Chapter 1. Product Intr oducti on ........................................................................................................... 1 1.1 Package Co ntent s ............................................................................................................... 1 1.2 Product Desc ription ................................... ...
-
Planet WNAP-C3220 - page 6
5.7.4 Backup Se ttings ...................................................................................................... 47 5.7.5 Set Pass word .......................................................................................................... 48 5.7.6 Diagnos tics ........................................................................ ...
-
Planet WNAP-C3220 - page 7
FIGURE F IGURE 2-1 WNAP-C 3220 P RODUCT O UTLOOK .................................................................................................... 8 F IGURE 2-2 WNAP-C 3220 F RONT P ANEL L A YOUT ................................................................................................ 9 F IGURE 2-3 WNAP-C 3220 R EAR P ANEL L A YOUT ...... ...
-
Planet WNAP-C3220 - page 8
VII F IGURE 5-29 L OGIN T IMEOUT .............................................................................................................................. 4 5 F IGURE 5-30 A UTO R EBOOT S ETTING .................................................................................................................. 45 F IGURE 5-31 V IEW L OGS ....... ...
-
Planet WNAP-C3220 - page 9
User Manual of WNAP-C3220 -1- Chapter 1. Product Introduction 1.1 Package Content s Thank you for choosing P LANET WNAP -C3220. Before inst alli ng the AP , please verify the content s inside the package box. WNAP-C32 20 Quick Inst allation Guide CD-ROM (User Manual includ ed) Ethernet Cable Power Adapter Mounting Kit If there is any item missing o ...
-
Planet WNAP-C3220 - page 10
User Manual of WNAP-C3220 -2- 1.2 Product Description PLANET WNAP-C3220 is a stylish PoE Wireless Access Point featuring the latest wireless technology and unique ceiling-mount arti stic design. It offers 300Mbps 802.11n wireless spe ed, multiple operation modes and 802.3af Power over Ethernet feat ures to increase client mobility and speed within ...
-
Planet WNAP-C3220 - page 11
User Manual of WNAP-C3220 -3- Advanced Wireless Security In aspect of security, b esides 64/128-bit W EP encryption, the WNAP-C 3220 integrates WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. It provides the wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and pr ...
-
Planet WNAP-C3220 - page 12
User Manual of WNAP-C3220 -4- ...
-
Planet WNAP-C3220 - page 13
User Manual of WNAP-C3220 -5- 1.3 Product Features St andard Compliant Hardw are Interface Complies with IEEE 802.1 1b/g/n Wireless LA N speed up to 300Mbps 1 x 10/100BASE-TX Port with 1-port PoE (PD, Powered Device) Supports 802 .3af standard-based PoE o r local AC power Secure Network Connection Advanced security: 64/128-b ...
-
Planet WNAP-C3220 - page 14
User Manual of WNAP-C3220 -6- 1.4 Product S pecifications Product WNAP-C32 20 300Mbps 802.11n Wireless Ceiling Mount Range Extender Hardware S pecifications LAN: 1x 10/100BASE-TX, Auto-MDI/MDIX, 802.3af PoE compliant Interface Wireless: IEEE 802.1 1b/g/n PoE IEEE 802.3af PoE Antenna Built-in 3dBi antenna x2 Reset Butto n Reset button on rear p anel ...
-
Planet WNAP-C3220 - page 15
User Manual of WNAP-C3220 -7- Encryption Security WEP (64/1 28-bit) WP A-PSK (TKIP) / WP A2-PSK (AES) WP A (TKIP) / WP A2 (AES) 802.1x Authentication Enable/Disable SSID Broa dcast Wireless Security Wireless LAN ACL (Access Control List) MAC filtering AP Isolation: Enable it to isolate ea ch connected wireless client Wireless Advanced Supports 8 02 ...
-
Planet WNAP-C3220 - page 16
User Manual of WNAP-C3220 -8- Chapter 2. Hardware Installation Please follow the instructions below to connect the WNAP-C 3220 to the exis ting network devices and you r computers. 2.1 Product Outlook Dimensions : 144 x 33mm ( Φ x H) Diagram : Front Vie w – LED Display Side Vie w – Reset Button Rear Vie w – DC Jack Port Rear Vie w ? ...
-
Planet WNAP-C3220 - page 17
User Manual of WNAP-C3220 -9- 2.1.1 Panel Layout The front and rear p anel provide a simple interface monito ring the AP . Figure 2-2 and Figure 2-3 show the hardware interface of the WNAP -C3220. Front Panel - LED Figure 2-2 WNAP-C3220 Front Panel Layout Rear Panel – Port & Button Figure 2-3 WNAP-C3220 Rea r Panel Layout ...
-
Planet WNAP-C3220 - page 18
User Manual of WNAP-C3220 -10- 2.1.2 Hardware Description LED definition Object Color St ate Description On Power on Flashing The system is initializing PWR Green Off LED enabled: Neither Power no r the device is malfunctioned LED disabled: the device powe r off or the LED is swit ched to off Button definition Object Description Reset Press the Res ...
-
Planet WNAP-C3220 - page 19
User Manual of WNAP-C3220 -1 1- Chapter 3. Connecting to the AP 3.1 System Requirement s Broadband Internet Access Service (Cable/xDSL/Ethernet connecti on) One PoE switch (supply power to the WNAP-C3220) PC with a working Ethernet adapter and an Ethernet cable with RJ45 connectors PC running Windows 98/ME, NT4.0, 2000/XP , Windows ...
-
Planet WNAP-C3220 - page 20
User Manual of WNAP-C3220 -12- Step 2. Plug the RJ45 Ethernet cable into the WNAP-C3220. Figure 3-2 WNAP-C3220 Install ation Diagram 2 Step 3. Plug the power adapter into the WNAP-C3220. If the WNAP-C3 220 is connected to an 802.3af PoE switch in S tep 2, you don’t have to plug the power adapter . Figure 3-3 WNAP-C3220 Install ation Diagram 3 Ste ...
-
Planet WNAP-C3220 - page 21
User Manual of WNAP-C3220 -13- Figure 3-5 WNAP-C3220 Install ation Diagram 5 1. ONLY use the power adapter supplie d wi th the WNAP-C3220. Otherwise, the product may be damaged. 2. For the power supply of the WNAP-C 3220, you could use either IEEE 802.3af PSE device or 12V DC adapter. Please d o not use 12V adapter and PSE device at the same time. ...
-
Planet WNAP-C3220 - page 22
User Manual of WNAP-C3220 -14- Chapter 4. Quick Installation Guide This chapter will show you how to configure the basic functions of your AP within minutes. A computer with wired Ethernet connection to the Wireless AP is required for the first-time configuration. 4.1 Manual Network Setup - TCP/IP Configuration The default IP addre ss of the WNAP-C ...
-
Planet WNAP-C3220 - page 23
User Manual of WNAP-C3220 -15- Figure 4-1 TCP/IP Setting Now click OK to save your settings. Now , you can run the Ping command in the command prompt to verify the network connection between your PC and the AP . The following example is on Windows 7 OS. Please follow the step s below: 1. Click on Start > R u n . 2. T ype “ cmd ” in the Searc ...
-
Planet WNAP-C3220 - page 24
User Manual of WNAP-C3220 -16- Figure 4-2 Windows S tart Menu 3. Open a command prompt and type ping 192.168.1.253 , and then press Enter . If the result displayed is similar to Figure 4-3 , it means the conne ction between your PC and the AP has been est ablished successfully . Figure 4-3 Successful result of Ping command If the result displayed i ...
-
Planet WNAP-C3220 - page 25
User Manual of WNAP-C3220 -17- Figure 4-4 Failed result of Ping command If the address is 0.0.0.0, check your adapter inst allation, security settings an d the settings on your AP . Some firewall software p rograms may block a DHCP request on newly inst alled adapters. ...
-
Planet WNAP-C3220 - page 26
User Manual of WNAP-C3220 -18- 4.2 S tarting Setup in the W eb UI It is easy to configure and manage the AP with the web browser . Step 1. T o access the configuration utility , open a web browser and enter the default IP address http://192.168.1.253 in the web address field of the browser . Figure 4-5 Login by default IP address After a mome nt, a ...
-
Planet WNAP-C3220 - page 27
User Manual of WNAP-C3220 -19- Chapter 5. Configuring the AP This chapter delivers a de tailed pres ent ation of AP’s functionalities and feature s under 7 main menus below , allowing you to manage the AP with ease . Figure 5-1 Main Menu During operation, if you are not clear abo ut a cert ain feature, you can simply click the “Help” button t ...
-
Planet WNAP-C3220 - page 28
User Manual of WNAP-C3220 -20- Figure 5-2 System S tatus This section allows you to view the AP’s LAN info listed below: Object Description Device Name: Displays the model of device. System T ime: Displays system time. Working Mo de: Displays working mode. Uptime: Displays the working time of the WNAP-C3220. Number of Wireless ...
-
Planet WNAP-C3220 - page 29
User Manual of WNAP-C3220 -21- Primary DNS Server: Displays the Primary DNS Server . Wireless S t atus This section allows you to view the wireless info listed below: Figure 5-3 Wireless S tatu s The page incl udes the following fields: Object Description Radio: Displays whether wireless is On or Off. Network Mode: Displays currentl ...
-
Planet WNAP-C3220 - page 30
User Manual of WNAP-C3220 -22- Figure 5-4 T raffic S tatistics The page incl udes the following fields: Object Description SSID: Displays the traf fic of the SSID T ot al RX T raffic: Displays MB of RX T raffic. T ot al RX Packets: Displays packet s of RX. T ot al TX T raffic: Displays MB of TX Traf fic. T ot al TX Packets: Disp ...
-
Planet WNAP-C3220 - page 31
User Manual of WNAP-C3220 -23- ID: Displays the number of wireless cli ent. MAC Address: Displays MAC addre ss of wireless client. SSID: Displays SSID of wireless client. IP: Displays IP of wireless client. Link Speed: Displays link speed of wireless client. Connection Duration: Displays the total co nnection time. 5.2 Quick ...
-
Planet WNAP-C3220 - page 32
User Manual of WNAP-C3220 -24- Figure 5-6 Quick Setup - AP Mode The page incl udes the following fields: Object Description SSID: Displays the primary SSID's name. Security Mode: Displays primary SSID 's security mode. Cipher T ype: Select one cipher type for the se curity mode. Security Key: Enter a security key for the A ...
-
Planet WNAP-C3220 - page 33
User Manual of WNAP-C3220 -25- Figure 5-7 Quick Setup - WDS Mode The page incl udes the following fields: Object Description SSID: Displays the primary SSID's name. Security Mode: Displays primary SSID 's security mode. MAC Address: The MAC address of the remote peers. The WNAP-C3220 support s a maximum of 4 remote WDS peers. ...
-
Planet WNAP-C3220 - page 34
User Manual of WNAP-C3220 -26- P2MP / PtMP: Point to Multiple Point Mode Example of a quick setup of WDS Mode : Step 1. Select “WDS Mode” and cli ck the Enable Scan to site-survey the remote AP . Figure 5-8 WDS -1 Step 2. Select the remote AP that you want to connect and then click Save . ...
-
Planet WNAP-C3220 - page 35
User Manual of WNAP-C3220 -27- Figure 5-9 WDS -2 Step 3. Then, you can see the remote AP’ s MAC address that has been filled in to the first MAC address field. ...
-
Planet WNAP-C3220 - page 36
User Manual of WNAP-C3220 -28- Figure 5-10 WDS -3 Step 4. Configure the security mode and securit y key for the WDS connection. Ensure the cha nnel is the same as the remote AP’s channel. Figure 5-1 1 WDS -4 ...
-
Planet WNAP-C3220 - page 37
User Manual of WNAP-C3220 -29- Step 5. If your application is only peer to peer (WDS Pt P), then, the connection has b een established successfully . If your application is WDS PtMP , please repe at the S teps 1~4 in the master AP . Each slave AP in the WDS PtMP topology is only required to configure the master AP’s MAC address. 5.2.3 AP Client M ...
-
Planet WNAP-C3220 - page 38
User Manual of WNAP-C3220 -30- Uplink AP MAC Addres s: Displays the MAC address of the uplink AP . The Uplinked AP’ s channel: Displays the uplinked AP’s channel. Example of a quick setup of AP Client Mode : Step 1. Select the “APClient Mode” and clic k the Enable Scan to site-s urvey the root AP . Figure 5-13 AP Client -1 Step ...
-
Planet WNAP-C3220 - page 39
User Manual of WNAP-C3220 -31- Figure 5-14 AP Client -2 Step 3. Then, you can see the remote AP’ s MAC address that has been filled in to the MAC Address field. Figure 5-15 AP Client -3 Step 4. Configure the security mode and securit y key for the AP Client connection. Ensu re the channel is the same as the remote AP’s channel. ...
-
Planet WNAP-C3220 - page 40
User Manual of WNAP-C3220 -32- Figure 5-16 AP Client -4 Step 5. Now , you can use a wirele ss client including laptop s, iPhone, iPad, or smart pho nes to connect to the root AP/router for the Internet access through the WNAP-C3220. 5.3 LAN Setup On the LAN Setup page, you can configure the IP p ara meters of the LAN on the screen as shown below . ...
-
Planet WNAP-C3220 - page 41
User Manual of WNAP-C3220 -33- St atic IP S pecify a static IP address, s ubnet mask, default gateway and DNS server for WNAP-C3220 manually . M ake sure the specified IP address is unique on your network in or der to prevent IP conflict. Address Mode: Dy nami c If a DHCP server exists in your network, you can sele ct this option, and thus the ...
-
Planet WNAP-C3220 - page 42
User Manual of WNAP-C3220 -34- Figure 5-18 DHCP Server The page incl udes the following fields: Object Description DHCP Server: Click “Enable” to enable the DHCP function. St art IP: The start IP address of all the available successive IPs. End IP: The end IP a ddress of all the available successive IPs. Lease Time: Select the t ...
-
Planet WNAP-C3220 - page 43
User Manual of WNAP-C3220 -35- Figure 5-19 DHCP Client List The page incl udes the following fields: Object Description ID: Displays the number of DHCP client. Host Name: Displays the name of DHCP client. IP Addres s: Displays IP of DH CP client. MAC Address: Displays MAC addre ss of DHCP clie nt. Lease Time: Displays the total ...
-
Planet WNAP-C3220 - page 44
User Manual of WNAP-C3220 -36- 5.5 Wireless The wireless menu contains su bmenus of the settings about wireless network. Please refer to the following sections for the det ails 5.5.1 Basic Choose menu “ Wireless Basic ” to configure the se curity settings for the wireless network on this page. After the configuration is done, p lease click ...
-
Planet WNAP-C3220 - page 45
User Manual of WNAP-C3220 -37- field. The maximum supported clients ar e 40. SSID A SSID (Service Set Ide ntifier) is the unique name of a wireless network. Th e WNAP-C3220 supported maximum 4 SSIDs. None It allows any device to join the network without performing any security check. WEP WEP (Wi red Equivalent Privacy), a basic encryption metho ...
-
Planet WNAP-C3220 - page 46
User Manual of WNAP-C3220 -38- (AES) encryption for the client. If it is selected, the dat a encryption can only be TKIP + AES and the passphrase is required. WP A WPA is a medium level encryption and i s supported by most wireless device s and operating systems. WP A2 WP A2 is a high level encryption and is supported by most wireless device s and ...
-
Planet WNAP-C3220 - page 47
User Manual of WNAP-C3220 -39- 1 1b/g Mixed Mode Allow the 1 1b/g-compliant client device to connect with the AP with auto-negotiation speed, and 1 1 n wireless client to co nnect the device with 1 1g speed. 11 b M o d e Allow the wireless client to connect with the device in 1 1b mode at the maximum speed of 1 1Mbps. 11 g M o d e Allow the 1 1g/1 ...
-
Planet WNAP-C3220 - page 48
User Manual of WNAP-C3220 -40- The page incl udes the following fields: Object Description Beacon Interv al: The interval of time that this access point broadcast a beacon. Beacon is used to synchronize the wireless network. Default is “10 0”. Fragment Threshold: Y ou can specify the maximum size of packet during the fragment ation of d ...
-
Planet WNAP-C3220 - page 49
User Manual of WNAP-C3220 -41- The page incl udes the following fields: Object Description SSID: Displays the current SSID. MAC Filter Mode: Y ou can choose to set to Allow or Deny , or disable this function. MAC Address: Enter the MAC address you want to allow or deny to conn ect to the WNAP-C3220 in the field. Then, click “Add” to ...
-
Planet WNAP-C3220 - page 50
User Manual of WNAP-C3220 -42- Managed devices that support SNMP including soft ware are referred to as an SNMP agent, which usually interact s with third-party SNMP management software to enable the sharin g of network status information between monitored devices and appli cations and the SNMP mana gement system. A defined collection of variables ...
-
Planet WNAP-C3220 - page 51
User Manual of WNAP-C3220 -43- 5.7 T ools This section f ocuses on how to mai ntain AP , including Restore t o Factory Default Setting, Backup/Restore, Firmware Upgrade, Reboot, Set Password, and Logs. 5.7.1 Maintenance Firmware Up date Firmware upgrade is released perio dically to improv e the functionality of your device and also to add new f ...
-
Planet WNAP-C3220 - page 52
User Manual of WNAP-C3220 -44- Reboot : Click this button to rebo ot the device. 5.7.2 Time This section assist s you in setting the Wireless AP’s syst em time . Y ou can either sel ect to set the time and date manually or automatically obtain the GM T time from Internet. Choose menu “ T ools Tim e ” to configure the system time. Y ou ...
-
Planet WNAP-C3220 - page 53
User Manual of WNAP-C3220 -45- The configured time and date settings a re lost when the wireless AP is powered off. Login T imeout Figure 5-29 Login T imeout Login Timeout : Y ou can configure the web login timeout (1-60 minutes). The default is 5 minutes. Auto Reboot Setting Figure 5-30 Auto Reboot Setting The page incl udes the follow ...
-
Planet WNAP-C3220 - page 54
User Manual of WNAP-C3220 -46- day reboot time. Wee kd a y: Select the day you need to reboot. 5.7.3 Logs V iew Logs The section is to view the system l og. Click the “Refresh ” to update the l og. Click “Clear” to clear all shown information. Figure 5-31 View Logs Refresh: Click this button t o update the log. Clear: Click ...
-
Planet WNAP-C3220 - page 55
User Manual of WNAP-C3220 -47- Click “Add” to setup a Log Server . Figure 5-33 Add Log Server The page incl udes the following fields: Object Description Number of Logs: Set the number of logs. Default is 200. Log Server IP: Enter the log server IP . Log Server Port: Enter the log server port. 5.7.4 Backup Settings This section allo ...
-
Planet WNAP-C3220 - page 56
User Manual of WNAP-C3220 -48- Figure 5-34 Backup & Restore The page incl udes the following fields: Object Description Backup: Once you have configured the device the way you want it, you can save these settings to a configuration file on your local hard drive that can later be imported to your device i n case that the device is restored to fa ...
-
Planet WNAP-C3220 - page 57
User Manual of WNAP-C3220 -49- Choose menu “ T ools Set Pa sswor d ” to change the user name and p assword which is in putted to access the web UI of the WNAP-C3220. Figure 5-36 User Name & Pass word Figure 5-37 Setting Login Password The page incl udes the following fields: Object Description Old User Name: Enter the old user name. ...
-
Planet WNAP-C3220 - page 58
User Manual of WNAP-C3220 -50- Old Password: Enter the old password. New User Name: Enter the new user name. Ne w P as swo rd : Enter the new password. Confirm New Password: Confirm the new password again. For the sake of secu rity , it is highly recommend ed that you change default login password an d user name. 5.7.6 Diagnostics T ...
-
Planet WNAP-C3220 - page 59
User Manual of WNAP-C3220 -51- Chapter 6. Quick Connection to a Wireless Network In the following sections, the default SSID of the WNAP-C3220 is configured to “ default ”. 6.1 Windows XP (Wireless Zero Configuration) Ste p 1 : Right-click on the wireless network icon displayed in the system tray Figure 6-1 System T ray – Wireless Network Ico ...
-
Planet WNAP-C3220 - page 60
User Manual of WNAP-C3220 -52- Ste p 4 : Enter the encryption key of the Wireless AP (1) The Wireless Network Connection box will appear (2) Enter the encryption key (3) Click the [Connect] button Figure 6-3 Enter the network key Ste p 5 : Check if “ Connected ” is displayed Figure 6-4 Choose a wireless network -- Conne cted ...
-
Planet WNAP-C3220 - page 61
User Manual of WNAP-C3220 -53- Some laptops are equi pped with a “Wireless ON/OFF” switch for the internal wireless LAN. Make sure the hardware wireless switch is switched to “ON” position. 6.2 Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in on Windows 7 that can be used to detect an d connect to wireless network. This built ...
-
Planet WNAP-C3220 - page 62
User Manual of WNAP-C3220 -54- If you will be connecting to this Wi reless AP in the future, check [ Connect automatically ]. Ste p 4 : Enter the encryption key of the Wireless AP (1) The Connect to a Network box will appear (2) Enter the encryption key (3) Click the [OK] button Figure 6-7 T ype the network key Figure 6-8 Connecting to a Network St ...
-
Planet WNAP-C3220 - page 63
User Manual of WNAP-C3220 -55- Figure 6-9 Connected to a Network ...
-
Planet WNAP-C3220 - page 64
User Manual of WNAP-C3220 -56- 6.3 Mac OS X 10.x .3 Mac OS X 10.x In the following sections, the default SSID of the WNAP-C3 220 is configured to “default”. In the following sections, the default SSID of the WNAP-C3 220 is configured to “default”. Ste p 1 : Right-click on the network ic on displayed in the system tray The AirPort Network C ...
-
Planet WNAP-C3220 - page 65
User Manual of WNAP-C3220 -57- Figure 6-12 Enter the Password If you will be connecting this wire less AP in the future, check [ Remember this network ]. Ste p 5 : Check if the AirPort is connected to the selected wireless network. If “Y es”, then there will be a “check” symbol in front of the SSID. Figure 6-13 Connected to the Network ...
-
Planet WNAP-C3220 - page 66
User Manual of WNAP-C3220 -58- There is another way to configure the MAC OS X Wireless settings: Ste p 1 : Click and open the [ Sy stem Preferences ] by going to Apple > System Prefer ences or Applications Figure 6-14 System Preferences Ste p 2 : Open Network Preference by clicki ng on the [ Network ] icon Figure 6-15 System Preferences -- Net w ...
-
Planet WNAP-C3220 - page 67
User Manual of WNAP-C3220 -59- Ste p 3 : Check Wi-Fi setting and select the available wireless network (1) Choose the AirPort on the left-menu (m ake sure it is ON) (2) Select Network Name [ default ] here If this is the first time to connect to the Wire less AP , it should show “No network selected ”. Figure 6-16 Select the Wi reless Network ...
-
Planet WNAP-C3220 - page 68
User Manual of WNAP-C3220 -60- 6.4 iPhone / iPod T ouch / iPad .4 iPhone / iPod T ouch / iPad In the following sections, the default SSID of the WNAP-C3220 is configured to “ default ”. In the following sections, the default SSID of the WNAP-C3220 is configured to “ default ”. Ste p 1 : T ap the [ Settings ] icon di splayed on the home scre ...
-
Planet WNAP-C3220 - page 69
User Manual of WNAP-C3220 -61- Figure 6-19 Wi-Fi setting – Not Connected Ste p 3 : T ap the targ et wireless network (SSID) in “ Choose a Network… ” (1) Turn on Wi-Fi by tapping “ Wi-Fi ” (2) Selec t SSID [ default ] Figure 6-20 T urn on Wi-Fi Ste p 4 : Enter the encryption key of the Wireless AP (1) The password input screen will be di ...
-
Planet WNAP-C3220 - page 70
User Manual of WNAP-C3220 -62- Figure 6-21 iPhone -- Enter the Password Ste p 5 : Check if the device is connected to the select ed wireless network. If “Y es”, then there will be a “check” symbol in front of the SSID. Figure 6-22 iPhone -- Connected to the Network ...
-
Planet WNAP-C3220 - page 71
User Manual of WNAP-C3220 -63- Appendix A: Planet Smart Discovery Utility T o easily list the WNAP-C3220 in y our Ethernet environme nt, the Planet Sm art Discovery Utility from user ’s manual CD-ROM is an ideal solution. The following installation instru ctions guide you to running the Planet Smart Discovery Utility . Ste p 1 : Deposit the Plane ...
-
Planet WNAP-C3220 - page 72
User Manual of WNAP-C3220 -64- Appendix B: Troubleshooting If you found the AP is working improperly or stop responding to you, please read this troubl eshooting first before contactin g the dealer for help. Some problems can be solved by yourself within a very short time. Scenario Solution The AP is no t responding to me when I want to access it b ...
-
Planet WNAP-C3220 - page 73
User Manual of WNAP-C3220 -65- use IP address to communicate with a remote server , but can’t use host name, please check DNS setting. I can’t locate my AP by my wireless device. a. ‘Broadcast ESSID’ set to off? b. All two antennas are properly se cured. c. Are you too far from your AP? T ry to get closer . d. Please remember that you have ...
-
Planet WNAP-C3220 - page 74
User Manual of WNAP-C3220 -66- Appendix C: Specifications Product WNAP-C32 20 300Mbps 802.11n Wireless Ceiling Mount Range Extender Hardware S pecifications LAN: 1x 10/100BASE-TX, Auto-MDI/MDIX, 802.3af PoE compliant Interface Wireless: IEEE 802.1 1b/g/n PoE IEEE 802.3af PoE Antenna Built-in 3dBi antenna x2 Reset Butto n Reset button on rear p anel ...
-
Planet WNAP-C3220 - page 75
User Manual of WNAP-C3220 -67- Encryption Security WEP (64/1 28-bit) WP A-PSK (TKIP) / WP A2-PSK (AES) WP A (TKIP) / WP A2 (AES) 802.1x Authentication Enable/Disable SSID Broa dcast Wireless Security Wireless LAN ACL (Access Control List) MAC filtering AP Isolation: Enable it to isolate ea ch connected wireless client s Wireless Advanced Supports 8 ...
-
Planet WNAP-C3220 - page 76
User Manual of WNAP-C3220 -68- Appendix D: Glossary 802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmi tter and receiver antennas to allow for increased data throughput via spatial multiplexing and increas ed range by exploiting the spatial diversity, perhaps thro ...
-
Planet WNAP-C3220 - page 77
User Manual of WNAP-C3220 -69- SSID - A S ervice S et Id entification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area net work. For the wireless devices in a network to comm unicate with each other, all devices must be configured with the same SSID. Th is is typically the configuration parameter for a wire ...
-
Planet WNAP-C3220 - page 78
EC Declaration of Conformity For the following equipment: *T ype of Product: 802.1 1n W ireless Ceiling Mount Access Point *Model Number: WNAP-C3220 * Produced by: Manufacturer‘s Name : Planet T echnology Corp. Manufacturer‘s Address: 10F ., No.96, Minquan Rd., Xindian Dist., New T aipei City 231, T aiwan (R.O.C.) is herewith confirmed to compl ...
-
Planet WNAP-C3220 - page 79
User Manual of WNAP-C3220 EC Declaration of Conformity English Hereby , PL ANET T echnology Corporation, declares that this 802.1 1n Wirele ss A P is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Lietuviškai Šiuo PLANET T echnolog y Corporation, , skelbia, kad 802.1 1 n Wireless A P tenkina vi ...
Do you have a question concerning Planet WNAP-C3220?
Use the form below
If you did not solve your problem by using a manual Planet WNAP-C3220, ask a question using the form below. If a user had a similar problem with Planet WNAP-C3220 it is likely that he will want to share the way to solve it.