Manual Martin Audio C4.8T

10 pages 7.28 mb
Download

Go to site of 10

Summary
  • Martin Audio C4.8T - page 1

    The Martin Experience C4.8T , C.6.8T , C8.1T User ’s Guide All material © 2007. Martin Audio Ltd. Subject to change without notice. ...

  • Martin Audio C4.8T - page 2

    All material © 2007. Martin Audio Ltd. Subject to change without notice. Installation Guide Martin Audio Ceiling Lou dspeakers C4.8T, C6.8T, C8.1T Description Martin Audio C4.8T, C6.8T a nd C8.1T ceiling loudspeakers a re all 2-way designs usi ng soft dome tweeters for t he widest dispersion and ex cellent off-axis performance. All models have per ...

  • Martin Audio C4.8T - page 3

    A steel cover plate with a clamped cable entr y protects the input connector against fire in accordance with BS 5839: Part 8, Section 10.3 . All models are fitted with a thermal fuse to prevent the loudspeaker from short circuiting and disabling other loudspeakers in its group under the influence of fire . Model Drivers Dispersion C4.8T 4 ” (100m ...

  • Martin Audio C4.8T - page 4

    All material © 2007. Martin Audio Ltd. Subject to change without notice. Note that all models are protec ted with a PTC (positive temperat ure coefficient) device and will quieten, if overdriven. T he PTC device will reset itself once the signal is reduced to a more sensible level. Installation Ceiling loudspeaker with C-bracket and tile rails (fo ...

  • Martin Audio C4.8T - page 5

    Suitable hole cutting methods will depend on the ceiling structure, local conditions, personnel, equipment etc and must be determined by the installer. Step 2 Place a tile rai l either side of the ceiling hole and clip the C - bracket over the upright edges of the tile rails. Note the rail orientations – outwards for the C4.8T and C6.8T, inwards ...

  • Martin Audio C4.8T - page 6

    Note that the tile rail ends may be reshaped to suit your particular ceiling structure. Tile rail end Step 3 Screw the C - bracket to the tile rails with the screws provided. C - bracket screwed to tile rail S tep 4 Place the loudspeaker into the ceiling hole (and through the centre of the C - bracket ) from the underside . Align the loudspeaker so ...

  • Martin Audio C4.8T - page 7

    2 - way ceiling loudspeaker orientation Make sure that the C4.8T and C6.8T swivel - tabs do not coincide with the C - bracket gap. Loudspeaker in place. N ote swivel - tab position s before fully tightening I t is permissible for one of the five C8.1T swivel - tabs to coincide with a C - bracket gap in order to maintain driver orientation. All mate ...

  • Martin Audio C4.8T - page 8

    Step 5 Screw the loudspeaker to the C - bracket by tight ening the screws from the underside of the baffle . Tightening the s wivel - tab screw s Step 6 Connect your pre - installed amplifier cable to the ceiling loudspeaker. Amplifier power input is via a 4 - pin rising clamp plug providing + and – inputs and + and – Loop Through connections a ...

  • Martin Audio C4.8T - page 9

    The input and loop connectors must be fireproofed using the steel cover and screws provided. This cover has a 0.75 ” (19mm) knockout and a clamped cable entry. Ceiling loudspeaker rear can – fireproof steel cover fitted Step 7 Fit a steel safety wire between its rear can safety tag and a suitable overhead supporting structure to provide backup ...

  • Martin Audio C4.8T - page 10

    Step 8 Push the grille into position ensuring that the grille is properly located in the baffle slots. Locate grille tags into slots Your Martin Audio ceiling loudspeaker is now ready for u se. Warranty Martin Audio ceiling loudspeaker products are warranted against manufacturing defects in materials or craftsmanship over a period of 5 years from t ...

Manufacturer Martin Audio Category Speaker

Documents that we receive from a manufacturer of a Martin Audio C4.8T can be divided into several groups. They are, among others:
- Martin Audio technical drawings
- C4.8T manuals
- Martin Audio product data sheets
- information booklets
- or energy labels Martin Audio C4.8T
All of them are important, but the most important information from the point of view of use of the device are in the user manual Martin Audio C4.8T.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Martin Audio C4.8T, service manual, brief instructions and user manuals Martin Audio C4.8T. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Martin Audio C4.8T.

A complete manual for the device Martin Audio C4.8T, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Martin Audio C4.8T by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Martin Audio C4.8T.

A complete Martin Audio manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Martin Audio C4.8T - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Martin Audio C4.8T, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Martin Audio C4.8T, that we can find in the current document
3. Tips how to use the basic functions of the device Martin Audio C4.8T - which should help us in our first steps of using Martin Audio C4.8T
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Martin Audio C4.8T
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Martin Audio C4.8T in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Martin Audio C4.8T?

Use the form below

If you did not solve your problem by using a manual Martin Audio C4.8T, ask a question using the form below. If a user had a similar problem with Martin Audio C4.8T it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)