English dropdown-ico

Manual BenQ SP891

64 pages Not applicable
Download

Go to site of 64

Summary
  • BenQ SP891 - page 1

    SP891 Digital Pr ojector Us e r M a n u a l W e lc ome ...

  • BenQ SP891 - page 2

    2 Table of contents English Ta b l e o f c o n t e n t s Important safety instructions ..... 3 Overview ........... ........................... 6 Shipping contents .................................. 6 Remote control batteries ....................... 7 Remote control operation ..................... 7 Projector features .............................. ...

  • BenQ SP891 - page 3

    3 Important safety instructions English Thank you for your purchase of this quality B enQ projector! It has been desig n ed to provide you with an enjoyable home theater viewing experi en ce. F or the best results, please read this manual thr oug h carefully as it is yo ur guide through the control menus and operation. I mp o r t ant safet y inst r ...

  • BenQ SP891 - page 4

    4 Important safety instructions English 5. Do not block the vents holes while the projector is on (even in standby mode): - Do not cover the projector with any item; - Do not place the projector on a blanket, bedding or an y other soft surfa ce. 9. Do not look straight into the projector lens during operation. It may harm your sight. 6. In areas wh ...

  • BenQ SP891 - page 5

    5 Important safety instructions English 13. N ever attemp t to replace the la mp assembly until the projector has cooled down and is unplugged from the power supply . 14. Whe n you think service or repair is required, take the projector only to a suitably qualified technician. 15. Do not a ttempt to disassemble this pro jector . There are dangerous ...

  • BenQ SP891 - page 6

    6 Overview English Ov er v iew Shipping c ontents Carefully unpack and verify that you have the items below . Some of the items may not be available depending on your region of purchase. Please check with your place of purchase. Some of the accessories may vary fro m region to region. The warranty card is only supplied i n some specific regions. Pl ...

  • BenQ SP891 - page 7

    7 Overview English R emot e contr ol batteries 1. T o open the battery co ver , turn the remote control ov er to v i ew its back, push on the finger gri p on the c over and slide it do wn in the direction of th e arrow as illustrated . The cover will s li d e o ff . 2. Remov e any existing batteries (if necessar y ) and install two new AAA batt eri ...

  • BenQ SP891 - page 8

    8 Overview English P roject or featur es • F ull HD compatible The projector is compatible with Standard Definition TV (SDTV) 480i, 480p, 576i, 576p, and H igh Definition TV (HDTV ) 720p , 1080i and 1080p formats, w i th the 1080p format providing a true 1:1 image r eprod uction. • High picture quality The projector provides ex cellent picture ...

  • BenQ SP891 - page 9

    9 Overview English P roject or e xterior v i ew Fr ont and upper side vi ew R ear v i ew Un d er v ie w 1. Co ntrol panel (See "Control panel" on page 10 for details.) 2. Lamp co ver 3. Fr ont IR sensor 4. V ent (heated air exhaust) 5. Pr ojection lens 6. Lens shift lever 7. A C P ower cable inlet 8. Rear IR sensor 9. RJ45 LAN input jack ...

  • BenQ SP891 - page 10

    10 Overview English Contr ols and functions Contr ol panel 6. Arrow/K eystone keys ( L eft / , Up / , Right / , D own / ) M oves the current On-Screen Display (OSD) menu selection in the direction of the arro w being pressed when the OSD menu is activated. Manually corrects distorted pictures resulting from an angled projection. 7. PO WER P erforms ...

  • BenQ SP891 - page 11

    11 Overview English R emote contr ol 1. Sourc e selection keys (COMPONENT , VI DEO , S-VIDEO , HDMI , PC) Selects an in put sour c e for dis p lay . The COMPONENT key toggles between Component 1 and Co mpo nent 2. 2. LASER Emits visible las e r pointer light for presentation purposes. 3. MENU/EXIT T u rns on the On-Screen Display (OSD) menu. Goes b ...

  • BenQ SP891 - page 12

    12 Positioning your projector English Po s i t i o n i n g y o u r p r o j e c t o r Choosi ng a locat i on Y our projector is designed to be installed in one of four possible installation locations. Y our room layout or personal pr eference wil l dictate which installation location you select. T ake into consideration the size and position of y ou ...

  • BenQ SP891 - page 13

    13 Positioning your projector English O b taining a preferred pr ojected image size The distance from the project or lens to the screen, the zoom setting, and the video form at ea ch factors in the projected image siz e. This project or is equipped with a movable lens. See "Shifting the projection lens" on page 16 for details. Y ou can se ...

  • BenQ SP891 - page 14

    14 Positioning your projector English Pr ojection dime nsions Installation for a 16:9 ratio screen The screen aspect ratio is 16:9 an d the projected picture is 16:9 The above numbers are approxim ate an d may be slightly different from the actual measuremen t s. Only the recommended screen sizes are listed. If you r screen size is not in the table ...

  • BenQ SP891 - page 15

    15 Positioning your projector English Installation for a 4:3 ratio screen The illustr a tions and table below are provided for those users w h o already hav e 4:3 aspe ct ratio screens or intend to purchase 4:3 aspect ratio screens to view 16:9 ratio projected images. The screen aspect ratio is 4:3 and the projected picture is 16:9 The above number ...

  • BenQ SP891 - page 16

    16 Positioning your projector English Shifting the pr ojection lens The lens shift control pr ovides flexibilit y for installi ng your projector . It allows the pr ojector to b e positioned off the c enter of the screen. The lens shift is expressed as a p e rcentage of the projected image height or w i dth. It is measured as an of f set from the pr ...

  • BenQ SP891 - page 17

    17 Connecting with video equipment English Co nnecting w ith v i deo equipment Y ou can connect the projec tor to any typ e of video equipm ent, such as a V CR, DVD player , digital tuner , cable or satellite decoder , video game c onsole or digital camera. Y ou can also connect it to a desktop or laptop PC or Apple M acintosh system. Y ou need onl ...

  • BenQ SP891 - page 18

    18 Connecting with video equipment English Connecting co mponent-v i deo dev i ces Be sure to match the corresponding colors between the cables and the terminals . The RCA type component video ja ck s are pro v ide d for connection to video output de vic es. The audio connections are provided for informational purp os es only . Y ou can also connec ...

  • BenQ SP891 - page 19

    19 Connecting with video equipment English Connecting a c ompute r Connect the p rojecto r to a compu ter with a V GA cable. Many laptops do not turn on their external video ports when connected to a pro j ector . Usually a key combination like Fn + F3 o r CRT/LCD key turns the extern a l display on/off. Locate a funct i on key labeled CRT/LCD or a ...

  • BenQ SP891 - page 20

    20 Using the projector English U sing the pr ojec t o r Pr eparations 1. Plug in and turn all of the connected equipment on. 2. If not already in, plug the supplied po wer cable into the A C inlet on the rear o f the projector . 3. Plug the pow er cable into a wall po wer outlet and turn the wall switch on. Please use the original accessorie s (e.g ...

  • BenQ SP891 - page 21

    21 Using the projector English Selecting an input sourc e The projec tor can be c onnected to mu l tiple equ i pment at t h e same time. When the projector is first turn ed on, i t w ill at tempt to recon n ec t with the input source which was in us e when the p r ojector was last shut down. To s e l e c t t h e v i d e o s o u r c e : • U sin g ...

  • BenQ SP891 - page 22

    22 Using the projector English Us i n g t h e m e n u s The projector is equipped with multilingual On -Screen Display (OSD) menus for making var i ous adjustments and s e ttings. Below is the ov erv i ew of the OSD menu. T o use the OSD menus, please set the OSD m e nu to y our familiar language. Securing the projecto r U sing a security cable loc ...

  • BenQ SP891 - page 23

    23 Using the projector English U tilizing the password function For security pu r poses and t o help prevent unauthorized use, the projector includes an opt i on for setting up password security . The password can be set through the On-Scr een Display (OSD) menu. Once the password is set and this function is selected, the pr ojector is password-pr ...

  • BenQ SP891 - page 24

    24 Using the projector English Entering the password r ecall procedure 1. Mak e sure the Input P ass w ord page is display ed on screen. P ress and hold PR ESET MODE on the pr ojecto r or MODE on the remote control for 3 sec onds. The projector will display a coded number on the screen. 2. W rite do wn the number and turn off y our projector . 3. S ...

  • BenQ SP891 - page 25

    25 Using the projector English A djusting the p roject ed image A djusting the projection angle There are four adjuster feet on the bottom of the projector . These can be us e d i f ne ce s s ar y to cha nge the p roj e c t i on angle. Screw the feet in or out as appropriate to aim and le v el the projection angle. If the screen and the pr oject or ...

  • BenQ SP891 - page 26

    26 Using the projector English Correcting picture dist or tion K eystoning occurs w h en the projector is not perpendicu lar t o the screen and is where the projected picture displays visible as a trap ez oid shape like either of the fol l owing: • T w o parallel sides ( l eft and rig h t, or top and bottom) but is noticeably wider on either side ...

  • BenQ SP891 - page 27

    27 Using the projector English U s ing the preset and user modes Selecting a preset mode The projector is preset w i th several pre-define d picture modes so that y ou can choose one to suit your operating en vironment and input sourc e picture type. T o select a picture mod e that suit s your n eed: • U sing the re mote control Pr ess PRESET MOD ...

  • BenQ SP891 - page 28

    28 Using the projector English Setting the U ser 1/U ser 2 mode There are two user -definable modes if the current avai lable picture modes are not suitable for y our need. Y ou can use one of the pict ur e modes (ex cept the selec t ed U ser mode) as a starting p o int and customize the settings. 1. In the Pictur e -- Basic men u, hi ghli ght Pict ...

  • BenQ SP891 - page 29

    2 9 U si ng t h e pr oj e c t or English Fine-tuning the picture quality No matter what picture mode you have selected, you are able to fine-tune those s e ttings to fit e v ery presentation purp ose . Those a d justments w i ll be saved to the preset mode y ou are at when you exit the OSD menu. Ad justing Brig htness Hi ghli ght Brig ht ness in th ...

  • BenQ SP891 - page 30

    30 Using the projector English A dvanc ed picture quality contr ols There are more advanc ed funct i ons in the Picture -- A dvanced menu t o be a d justed to your preference. T o sav e the settings, j ust press MENU on th e project or or MENU/EXIT on the remote control to leave the OSD menu. Setting Black Level Hi ghli ght Black Lev el and press / ...

  • BenQ SP891 - page 31

    31 Using the projector English Setting a prefe rred colo r temperatur e T o set a preferred color temperature: 1. H igh light Color T emper a ture and s e lect Us er 1 , Us er 2 , or Use r 3 by pressing / on the projector or r emote control. 2. Press to hig hlig h t Color T emperature User_ Fine T uning and press ENTER . The Color T emperatur e U s ...

  • BenQ SP891 - page 32

    32 Using the projector English Color Management In most installation situations, color management wil l not be necessary , such as in classroom, meeting room, or lounge room situations where lig h ts remain on, or where building external w i ndows allow daylight into the room. Only in permanent installations w i th controlled lighti ng levels such ...

  • BenQ SP891 - page 33

    33 Using the projector English Setting 3D Comb Filter This feature separates composite sign al to Y (brightness) sig n al and C (color) signal, and can help produce clear er and shar per images with cor r ec t colors i n p la c e. This function is only availa ble when a Video signal is selected Selecting the aspec t ratio The "aspect ratio&quo ...

  • BenQ SP891 - page 34

    34 Using the projector English 3. Letter Box ( LB ): Scales a pictur e to fit the projector’ s native resol ution in its hori zontal w idth and r esize the picture ’ s height to the 3/4 of the projection w i dth. This may pr oduce a picture greater in height than can b e d i splaye d , so p ar t of the pi c tu r e is l o st ( n ot d isp l ayed) ...

  • BenQ SP891 - page 35

    35 Using the projector English Hiding the image In order to draw the audience's full attention to the presenter , y ou can use BLANK on the remote control to hide the scr een image. When this function is activated with an audio input connected, the audio can still be heard. Y ou can set the blank time in the Display > Blank Timer me nu to l ...

  • BenQ SP891 - page 36

    36 Using the projector English A djusting the sound The sound adjustments made as below will hav e an effe ct on the projector speaker(s). Be sure you ha ve made a correct connection to the p r ojector audio input. See "Connecting with v ideo equipment" on page 17 for ho w the audio input is connect ed. M uting the sound T o temporarily t ...

  • BenQ SP891 - page 37

    37 Using the projector English Contr olling the pr ojecto r thro ug h a Lan en v i ronment Lan Contr ol Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area networ k . Configuring the Lan Control Settings If y ou are in a DHCP environment: 1. ...

  • BenQ SP891 - page 38

    38 Using the projector English 2. The remote network oper ation page opens. This page allo ws y ou to oper at e the projector as if y ou were us i ng the remo t e co n t ro l o r con trol pan e l o n t h e p r oje ctor . The tools page allows y ou to manage the projector , co nfigur e the Lan co ntrol settings and secure access of remote network op ...

  • BenQ SP891 - page 39

    39 Using the projector English Please pay attention to th e limitation of input length (including space and other punctuation keys) in the list blo w : The info page displa ys the information and status of this projector . For more information, visit http://www .crestron.com & www.cres tron.com /getro om v i ew . Category Item Input Length Maxi ...

  • BenQ SP891 - page 40

    40 Using the projector English Oper ating in a high altitude en vironment W e rec ommend that you activate Hig h Al t itude Mode when your en vi r onment is higher than 1500 meters (around 4920 feet) abov e sea level, or whenev er the projector will be used for extended perio d s of time (>10 hours) without shutdown. T o ac t ivate Hig h Alti tu ...

  • BenQ SP891 - page 41

    41 Using the projector English Displa y i ng mor e than one image sourc e simultaneously Y our projector is capable of dis p laying pictures simu ltaneous ly from tw o input sources, which can be used to enhance y our presentation in an interesting way . Ensure the signals you want to display ar e correctly conn ected to the proj ector . To d i s p ...

  • BenQ SP891 - page 42

    42 Using the projector English Tu r n i n g t h e p r o j e c t o r o f f T o tur n the projector off, press POWER ( ) on the pr ojector or remote c ontrol and a warning message appears. Press PO WER () again. • The P ower indicator light flashes orange and the fans run for about two minutes t o cool the lamp. The pr ojector will not respond to a ...

  • BenQ SP891 - page 43

    43 Using the projector English On-Screen Displa y (OSD) men us On-Screen Displa y (OSD) struc t ure Please note that the on-scr een display (OSD) menu s var y according t o the sig n al ty pe selec ted. Main menu Sub-menu Options Picture -- Basic Picture Mode Cinema/Dynamic/Present ation/sRGB/User 1/User 2 Load Set tings From Brightness 0–100 Con ...

  • BenQ SP891 - page 44

    44 Using the projector English Main menu Sub-menu Options Display Aspect Ratio Anamorphic/4:3/Letter Box/W ide/Real Keystone 2D Keystone Position Overscan Adjustment 0/1/2/3 Color Space Conversion Auto/RGB/YUV PIP PIP On/Off Main Source HDMI/Video/S-Video/Component 1/ Component 2/PC Second Source Active Window M a in/PIP Position T op-Right/Bottom- ...

  • BenQ SP891 - page 45

    45 Using the projector English Not e that the menu items are available when the projector detects at le ast on e valid sig n al. If there is no equipment connected to the projector or no signa l detected, limited menu items are accessible. Main menu Sub-menu Options Advanced Setup Lamp Settings Lamp Power Normal/Economic Reset Lamp T imer Equivalen ...

  • BenQ SP891 - page 46

    46 Using the projector English Picture -- Basic menu Picture -- A dvanced men u Function Description Picture Mode Pre-defin ed picture modes are provided so yo u can optimize y our projecto r picture set-up to suit y our program t y p e. See "Selecting a preset mode" on page 27 for details. Load Settings From Selects a preset mode that mo ...

  • BenQ SP891 - page 47

    47 Using the projector English Displa y menu Function Description Aspect Ratio There are sev eral options to set the picture’ s aspect ratio depending on your input source. See "Selecting the aspect ratio" on page 33 for details. Keystone Corrects an y keystoning of the picture. See "Correcting picture distortion" on page 26 f ...

  • BenQ SP891 - page 48

    48 Using the projector English Syst em Setup menu Function Description Language Sets the language for the On-Screen Displa y (OSD) menus. See "U sing the menus" on page 22 for details. Splash Screen Allows y ou to select which logo screen will be displayed during projecto r star t- up. Y ou can choose Be nQ logo screen, Blue screen or Bla ...

  • BenQ SP891 - page 49

    49 Using the projector English Ad vanced S etup menu Function Description Lamp Sett ings Lamp P ower Selects the pr ojector lamp power between No rma l and Economic modes. Res et Lamp Timer Once the lamp is renewed, sel ect Re set t o return the lamp timer to "0". S ee "R esetting the lamp timer" on page 55 for de t ails . Equiv ...

  • BenQ SP891 - page 50

    50 Using the projector English Info rmation menu This menu shows y ou the current oper at ing status of the projector . Some picture adjustments are available only when certain input sources are in use. Unavailab l e adjustments are not shown on the screen. Function Description F AQ-Image and Inst allation Displays possible solutions to problems yo ...

  • BenQ SP891 - page 51

    51 Additional information English A d ditional infor m ation Care of the projec tor Y our project or needs little maintenan ce. The only thing you ha ve to do on a regular basis is keep the lens cle an. Never remove any p arts of the p roj ector e xcept the lamp. Contact your dealer or local cust omer ser v ice center if the projector fails to oper ...

  • BenQ SP891 - page 52

    52 Additional information English Lamp information Getting to kno w the lamp hour When the pr ojector is in op er ation, the dura t ion (in hours) of lamp usage is automatically calculated b y the built-in timer . T o obtain the lamp hour information: 1. Pr ess MENU on the project or or MENU/EXIT on the remote control , and then press / until the A ...

  • BenQ SP891 - page 53

    53 Additional information English T iming of replacing the lamp W hen the Lamp indicator lig h ts up red or a message appears suggesting it is time to replace the lamp , please install a new lamp or consult your dealer . An old lamp ma y cause a malfunction in the projector and in some instances the lamp may explode. Go t o http://lamp.BenQ.c om fo ...

  • BenQ SP891 - page 54

    54 Additional information English 1. T urn the powe r off and disconnect the project or from the po wer outlet. T urn off all connected equipment and disconnec t all other cables. See "T urning the projector off " on page 42 for details. 2. Slightly lift the project or up. Loosen the screws on the lamp co ver . 3. R emov e the lamp cov er ...

  • BenQ SP891 - page 55

    55 Additional information English R esetting the lamp timer Do not reset the lamp tim e r if the lamp has not been rep l aced as this could cause dam a ge. 1. After the start-up logo , press MEN U on the projector or MENU/EXIT on the remot e control, and then press / until the Adv ance d Se t u p men u i s high ligh ted . 2. P r ess to highli ght L ...

  • BenQ SP891 - page 56

    56 Additional information English Ind ica to r s There are three indicators which sho w the status of the projec t or . Check the follow i ng for infor m ation about the indicator lights. If there is an y t hing wron g, turn th e pr ojector off and contact your dealer . When the pr ojector is in a normal state W hen the projector is in an abnormal ...

  • BenQ SP891 - page 57

    57 Additional information English T r oubleshooting Problem Ca use Remedy The project or does not turn on. There is no power fr om the power cable. Plug the power cable into the A C inlet on the rear of the projecto r , and plug the power cable into to the po wer outlet. If the power ou tlet has a switch, make sure that it is switched on. (See page ...

  • BenQ SP891 - page 58

    58 Additional information English Specifications All specifications are subject to change without notice. Optical Proj e c tion s y s t em Single-chip DLP™ system. DMD chip 0.65" DLP (1920 x 1080) Lens F = 2.48 to 2.81, f = 24.1 to 36.15 mm Proje ctio n scree n s i ze 28" to 500" Lamp 400W Electrical Compatibility PC: 640 x 400 to ...

  • BenQ SP891 - page 59

    59 Additional information English Dimensions 428 mm x 318 mm x 169 mm (W x D x H) Ceiling mount installation 428 318 169 128 88 151.2 173 106 211.7 424.4 364.4 124.5 397.9 83.2 104 175 240 324.1 92.2 222.2 282.2 Ceiling mount screws: M6 x 8 (Max. L = 8 mm) Unit: mm ...

  • BenQ SP891 - page 60

    60 Additional information English Timing c har t Supported timing for PC input * Only for the PC (analog RGB) inputs Format Reso lution Refresh rate (Hz) H. Frequency (KHz) Pixel Frequen c y (MHz) 640 x 480 640 x 480 59.94 31.469 25.175 72.809 37.861 31.5 75 37.5 31.5 85.008 43.269 36 800 x 600 800 x 600 56.25 35.156 36 60.317 37.879 40 72.188 48.0 ...

  • BenQ SP891 - page 61

    61 Additional information English Supported timing for HDMI (HDCP) input Supported timing for EDTV and HDTV (via Component inpu ts) Supported timing for V ideo and S-V ideo inputs Format Resolution Re fresh rate (Hz) H. Freq. (KHz) Pixel Freq. (MHz) Aspect 480i 720 x 480 59 .94/60 15 .734/15.75 27/27.027 16:9 480p 720 x 480 59.94/60 31.469/31.5 27/ ...

  • BenQ SP891 - page 62

    62 Warranty and Copyright information English W ar ranty and Cop y rig ht information Wa r r a n t y BenQ warrants this product against any defects in material and workmanship, under normal usage and storage. Pr oof of purchase date will be required with any warran t y claim. In the event this product is found to be defective within the warr ant y ...

  • BenQ SP891 - page 63

    63 Regulation statements English R egulation stat ements FCC statement (for U nit ed States users) This equipment has b een tested and found to comply wi th the limits for a Class B digital device, pursuant to P art 15 of the FCC Rules. These limits are design ed to pr ovide reasonable protection against harmful interferenc e in a residential insta ...

  • BenQ SP891 - page 64

    64 Regulation statements English A ccessibility Requir ements for Reha bilitation A ct of 1973, Section 508 Ben Q's com m it ment to a cces sible p rod u c t s a llows us to support government in making acc essible technology choices BenQ's L CD monitors and projecto rs are compliant with Section 508 guidelines by including the assistive ...

Manufacturer BenQ Category Video projector

Documents that we receive from a manufacturer of a BenQ SP891 can be divided into several groups. They are, among others:
- BenQ technical drawings
- SP891 manuals
- BenQ product data sheets
- information booklets
- or energy labels BenQ SP891
All of them are important, but the most important information from the point of view of use of the device are in the user manual BenQ SP891.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals BenQ SP891, service manual, brief instructions and user manuals BenQ SP891. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product BenQ SP891.

Similar manuals

A complete manual for the device BenQ SP891, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use BenQ SP891 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of BenQ SP891.

A complete BenQ manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual BenQ SP891 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the BenQ SP891, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the BenQ SP891, that we can find in the current document
3. Tips how to use the basic functions of the device BenQ SP891 - which should help us in our first steps of using BenQ SP891
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with BenQ SP891
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of BenQ SP891 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning BenQ SP891?

Use the form below

If you did not solve your problem by using a manual BenQ SP891, ask a question using the form below. If a user had a similar problem with BenQ SP891 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)