English dropdown-ico

Manual Patton electronic 1008

10 pages 0.11 mb
Download

Go to site of 10

Summary
  • Patton electronic 1008 - page 1

    USER MANUAL MODEL 1008 Ultra-Miniature, High Speed, Multipoint DB-9 Short Range Modem SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M1008-D Doc# 047041UD Revised 6/25/98 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 1008 - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 1008 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse, or unauthorized ...

  • Patton electronic 1008 - page 3

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for One Y ear parts and labor . If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics T echnical Support at (301 ...

  • Patton electronic 1008 - page 4

    T o access the Model 1008’s internal PC boards, insert a small flat- blade screwdriver between the connector and the lip of the case and twist gently as shown in Figure 3 (below). Both DIP switch S1 and S2 are marked with individual switch numbers 1 thru 4. Use these numbers, as well as the “ON” designation to orient the switch properly (see ...

  • Patton electronic 1008 - page 5

    3.1.3 DIP SWITCH S2 SETTINGS DIP switch S2 is used to configure carrier control, RTS/CTS delay and communication protocol. The summary table below shows the factory default settings for switch S2. Following the summary table is a detailed description of each individual switch. *Note: Switches S2-3 and S2-4 should be switched simultaneously S2-1: Ca ...

  • Patton electronic 1008 - page 6

    4.0 INST ALLA TION Once the Model 1008 is properly configured, it is ready to connect to your system. This section tells you how to properly connect the Model 1008 to the twisted pair and EIA/TIA-574 interfaces, and how to operate the Model 1008. 4.1 TWISTED P AIR CONNECTION The Model 1008 supports 2-wire or 4-wire communication between two or more ...

  • Patton electronic 1008 - page 7

    7. When you finish connecting the wires to the terminal block, the assembly should resemble the diagram below: 8. Place the 2 halves of the strain relief assembly on either side of the telephone wire and press together very lightly . Slide the assembly so that it is about 2 inches from the terminal posts and press together firmly . If your cable di ...

  • Patton electronic 1008 - page 8

    When connecting two Model 1008s, it is necessary to use a crossover cable. The diagrams below show how a crossover cable should be constructed for the following environments: 4-wire RJ-1 1, 4-wire RJ-45, 2-wire RJ-1 1 or 2-wire RJ-45. RJ-1 1 Cable (4-Wire) SIGNAL PIN# PIN# SIGNAL GND † 1 -----------------------6 GND † RCV - 2 ------------------ ...

  • Patton electronic 1008 - page 9

    Figure 6 (below) shows how to wire the two-pair cables properly for a Model 1008 daisy chain topology . Note that the ground connection is not needed. 4.3 CONNECTION TO THE EIA/TIA-574 INTERF ACE The Model 1008 is designed to plug directly into the DB-9 serial port of an EIA/TIA-574 DTE device (PC, laptop, host). If you must use a cable to connect ...

  • Patton electronic 1008 - page 10

    APPENDIX B P A TTON MODEL 1008 EIA/TIA-574 INTERF ACE DB-9 SIGNAL 1 -----------------CD 2 -----------------RD 3 -----------------TD 4 -----------------DTR 5 -----------------SG/FG 6 -----------------DSR 7 -----------------RTS 8 -----------------CTS 9 -----------------(Optional 6-12 VDC power) Copyright © Patton Electronics Company All Rights Reser ...

Manufacturer Patton electronic Category Network Card

Documents that we receive from a manufacturer of a Patton electronic 1008 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 1008 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 1008
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 1008.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 1008, service manual, brief instructions and user manuals Patton electronic 1008. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 1008.

Similar manuals

A complete manual for the device Patton electronic 1008, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 1008 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 1008.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 1008 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 1008, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 1008, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 1008 - which should help us in our first steps of using Patton electronic 1008
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 1008
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 1008 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 1008?

Use the form below

If you did not solve your problem by using a manual Patton electronic 1008, ask a question using the form below. If a user had a similar problem with Patton electronic 1008 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)