English dropdown-ico

Manual Intel G4H875-C

124 pages 2.74 mb
Download

Go to site of 124

Summary
  • Intel G4H875-C - page 1

    935-G4H875-000 A77100333 G4H875-N G4H875-C G4H875-B Re v . A+ System Board User’ s Manual ...

  • Intel G4H875-C - page 2

    Cop yright This publication contains information that is protected by copyright. No par t of it ma y be reproduced in any form or by any means or used to make any transformation/adaptation without the prior wr itten permission from the copyr ight holder s. This publication is pro vided for infor mational purposes only . The manufacturer makes no re ...

  • Intel G4H875-C - page 3

    Batter y: • Danger of explosion if batter y incorrectly replaced. • Replace only with the same or equivalent type recommend by the manufacturer . • Dispose of used batter ies according to the batter y manufacturer’ s instr uctions. Joystick or MIDI por t: • Do not use any joystick or MIDI device that requires more than 10A current at 5V D ...

  • Intel G4H875-C - page 4

    Notice An electronic file of this man ual is included in the CD . T o view the user’ s manual, inser t the CD into a CD-R OM dr iv e . The autor un screen (Main Board Utility CD) will appear . Click “User’ s Manual” on the main menu. ...

  • Intel G4H875-C - page 5

    T able of Contents Chapter 1 - Introduction 1.1 Features and Specifications.................................................................................. 1.2 Hyper -Threading T echnology Functionality Requirements..... 1. 3 Package Checklist......................................................................................................... ...

  • Intel G4H875-C - page 6

    Introduction 1 6 Appendix A - Enabling the Hyper -Thr eading T echnology A. 1 Enabling the Hyper -Threading T echnology ......................................... Appendix B - CPU Fan Protection B. 1 CPU Fan Protection............................................................................................. Appendix C - CPU T emperatur e Pr otect ...

  • Intel G4H875-C - page 7

    1 Introduction 7 1.1 Features and Specifications 1.1.1 Features Chipset • Intel ® 875P chipset - Intel ® 82875P Memor y Controller Hub (MCH) - Intel ® Hance Rapids I/O Controller Hub Processor The system board is equipped with Socket 478 for installing one of the following suppor ted processor s. • Intel ® P entium ® 4 (Prescott and Nor th ...

  • Intel G4H875-C - page 8

    Introduction 1 8 Perf ormance Acceleration T echnology (P A T) P A T mode is suppor ted onl y when the system uses DDR400 with 800MHz FSB CPU. P A T performs data tr ansactions directly from the CPU to the system memor y , bypassing the normal path of oper ation. This reduces the MCH timing therefore pro viding improved system performance. Expansio ...

  • Intel G4H875-C - page 9

    1 Introduction 9 Onboard Audio Features • 18-bit stereo full-duplex codec with independent variable sam- pling rate • High quality differential CD input • T r ue stereo line lev el outputs • 2-channel audio output Onboard LAN Features • 82547EI Gigabit LAN CSA interface (G4H875-N only) - Integrated power management functions - Full duplex ...

  • Intel G4H875-C - page 10

    Introduction 1 10 USB Ports The system board suppor ts USB 2.0 and USB 1.1 por ts. USB 1.1 suppor ts 12Mb/second bandwidth while USB 2.0 suppor ts 480Mb/second bandwidth providing a mar k ed impro vement in device transfer speeds between your computer and a wide range of simultaneously accessible external Plug and Play peripherals. BIOS • Award B ...

  • Intel G4H875-C - page 11

    1 Introduction 11 I/O Connectors • 1 connector for 2 additional external USB 2.0/1.1 por ts (G4H875-B only) • 2 connector s for 2 external ser ial por ts (G4H875-N only) • 1 front audio connector for external line-out and mic-in jacks • 1 connector for an external game/MIDI por t • 2 inter nal audio connector s (CD-in and AUX-in) • 1 co ...

  • Intel G4H875-C - page 12

    Introduction 1 12 1.1.3 Intelligence CPU Fan Protection The CPU Fan Protection function has the capability of monitoring the CPU fan when the system boots. Once it has detected that the CPU fan did not rotate, 5 warning beeps will sound then the system will automatically pow er -off. This preventiv e measure has been added to protect the CPU from d ...

  • Intel G4H875-C - page 13

    1 Introduction 13 W ake-On-LAN This feature allo ws the networ k to remotely wake up a Soft P ower Down (Soft-Off) PC . It is suppor ted via the onboard LAN por t, via a PCI LAN card that uses the PCI PME (P ower Management Ev ent) signal or via a LAN card that uses the Wak e-On-LAN connector . Howe ver , if your system is in the Suspend mode, you ...

  • Intel G4H875-C - page 14

    Introduction 1 14 A CPI The system board is designed to meet the ACPI (Advanced Con- figuration and P ower Interface) specif ication. A CPI has ener gy sa ving features that enables PCs to implement P ower Management and Plug-and-Play with operating systems that suppor t OS Direct P ower Management. Cur rently , only Windows ® ® ® ® ® 98SE/200 ...

  • Intel G4H875-C - page 15

    1 Introduction 15 1. 2 Hyper -Threading T echnolog y Functionality Requirements Enabling the functionality of Hyper -Threading T echnology for your computer system requires ALL of the following platf or ms. Components: • CPU - an Intel ® P entium ® 4 Processor with HT T echnology • Chipset - an Intel ® chipset that suppor ts HT T echnology ? ...

  • Intel G4H875-C - page 16

    16 2 Hardware Installation 2.1 System Board La yout Chapter 2 - Hardware Installation G4H875-N KB/Mouse COM 1 COM 2 Parallel LAN 1; USB 1-2 Intel Gigabit 82547EI Intel 82551QM Line-out Line-in Mic-in LAN 2; USB 3-4 Socket 478 1 PS/2 KB/Mouse power select (JP2) 1 USB 1-4 power select (JP3) Intel 82875P AG P PCI Slot 1 PCI Slot 2 PCI Slot 3 1 Chassis ...

  • Intel G4H875-C - page 17

    17 2 Hardware Installation KB/Mouse COM 1 COM 2 Parallel LAN; USB 1-2 Intel 82551QM Line-out Line-in Mic-in USB 3-4 Socket 478 1 PS/2 KB/Mouse power select (JP2) 1 USB 1-4 power select (JP3) Intel 82875P AG P PCI Slot 1 PCI Slot 2 PCI Slot 3 1 Chassis open (J6) PCI Standby LED BIOS I/O 1 Game AUX-in 1 CD-in Audio Codec 1 Front audio 1 S/PDIF 1 IrDA ...

  • Intel G4H875-C - page 18

    18 2 Hardware Installation G4H875-B Note: The illustrations on the following pages are based on the G4H875-N system board. KB/Mouse COM 1 COM 2 Parallel LAN 1; USB 1-2 Intel 82551QM Line-out Line-in Mic-in Socket 478 1 PS/2 KB/Mouse power select (JP2) 1 USB 1-2 power select (JP3) Intel 82875P AG P PCI Slot 1 PCI Slot 2 PCI Slot 3 1 Chassis open (J6 ...

  • Intel G4H875-C - page 19

    19 2 Hardware Installation 2 1 ON 2.2 System Memor y W arning: Electrostatic discharge (ESD) can damage your system board, processor , disk dr ives , add-in boards , and other components . P erfor m the upgrade instruction procedures described at an ESD workstation only . If such a station is not available, you can provide some ESD protection by we ...

  • Intel G4H875-C - page 20

    20 2 Hardware Installation The system board suppor ts the follo wing memor y interface . Single Channel (SC) Data will be accessed in chunks of 64 bits (8B) from the memor y channels. Virtual Single Channel (VSC) If both channels are populated with different memor y configurations, the MCH defaults to Vir tual Single Channel. Dual Channel (DC) Dual ...

  • Intel G4H875-C - page 21

    21 2 Hardware Installation The table below lists the various optimal operating modes that should be configured f or the memor y channel operation. Config No memor y Single channel A Single channel A Single channel A Single channel B Single channel B Single channel B Vir tual single channel Vir tual single channel Vir tual single channel Vir tual si ...

  • Intel G4H875-C - page 22

    22 2 Hardware Installation Config Dynamic Mode Addressing Dynamic Mode Addressing Dynamic Mode Addressing Dynamic Mode Addressing Dynamic Mode Addressing Dynamic Mode Addressing DDR 1 E P(*)(1,3) DS P(*)(1,3) DS E P(*)(1,3) SS P(*)(1,3) SS DDR 2 P(*)(2,4) DS E P(*)(2,4) DS P(*)(2,4) SS E P(*)(2,4) SS DDR 3 E P(*)(1,3) DS P(*)(1,3) DS E P(*)(1,3) SS ...

  • Intel G4H875-C - page 23

    23 2 Hardware Installation 2.2.1 Installing the DIM Module A DIM module simply snaps into a DIMM socket on the system board. Pin 1 of the DIM module must correspond with Pin 1 of the socket. 1 . Pull the “tabs” which are at the ends of the socket to the side. 2 . P osition the DIMM above the sock et with the “notch” in the module aligned wi ...

  • Intel G4H875-C - page 24

    24 2 Hardware Installation 2.3 CPU 2.3.1 Overview The system board is equipped with a surface mount 478-pin CPU socket. This socket is exclusively designed f or installing an Intel processor . 2.3.2 Installing the CPU 1 . Locate Socket 478 on the system board. 2. Unlock the socket by pushing the lever sideways, away from the socket, then lifting it ...

  • Intel G4H875-C - page 25

    25 2 Hardware Installation 3 . P osition the CPU above the socket then align the gold mark on the corner of the CPU (designated as pin 1) with pin 1 of the socket. Important: Handle the CPU by its edges and avoid touching the pins. Gold mar k 4. Inser t the CPU into the socket until it is seated in place. The CPU will fit in onl y one orientation a ...

  • Intel G4H875-C - page 26

    26 2 Hardware Installation 5. Once the CPU is in place, push down the lever to lock the socket. The lever should click on the side tab to indicate that the CPU is completely secured in the socket. 2.3.3 Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heatsink. Without sufficient air circulation across the CPU and ...

  • Intel G4H875-C - page 27

    27 2 Hardware Installation 1. The system board comes with the retention module base already installed. Retention module base Retention hole Retention hole Retention hole Retention hole 2. P osition the fan / heat sink and retention mechanism assembly on the CPU, then align and snap the retention legs’ hooks to the retention holes at the 4 corner ...

  • Intel G4H875-C - page 28

    28 2 Hardware Installation 3. The retention levers at this time remains unlocked as shown in the illustration below . Retention lever Retention lever 4. Mov e the retention lever s to their opposite directions then push them down. This will secure the fan / heat sink and retention mechanism assembly to the retention module base. Note: Y ou will not ...

  • Intel G4H875-C - page 29

    29 2 Hardware Installation 2 1 O N 2.4 Jumper Settings 2.4.1 Clearing CMOS Data If you encounter the following, a) CMOS data becomes corrupted. b ) Y ou forgot the super visor or user password. c ) Y ou are unable to boot-up the computer system because the processor’s ratio/clock was incorrectly set in the BIOS. you can reconfigure the system wit ...

  • Intel G4H875-C - page 30

    30 2 Hardware Installation 4 . After powering-on the system, press <Del> to enter the main menu of the BIOS. 5 . Select the Frequency/V oltage Control submenu and press <Enter>. 6 . Set the “CPU Clock Ratio” or “CPU Clock” field to its default setting or an appropriate bus clock or frequency ratio. Refer to the Frequency/V oltag ...

  • Intel G4H875-C - page 31

    31 2 Hardware Installation 2 1 ON 2.4.2 PS/2 K eyboard/Mouse W ak e Up ! JP2 2-3 On: 5VSB 1-2 On: VCC (default) 3 1 2 3 1 2 This jumper is used to select the power of the PS/2 Keyboard/ Mouse por t. Selecting 5VSB will allow you to use the W ake-On- PS/2 Keyboard/Mouse function. BIOS Setting: “P ow er On Function” (“Super IO Device” section ...

  • Intel G4H875-C - page 32

    32 2 Hardware Installation 2 1 ON 2.4.3 USB K eyboar d W ake Up These jumper s are used to select the power of the USB por ts. Selecting 5VSB will allow y ou to use the W ake-On-USB Key- board function. On the G4H875-N and G4H875-C system boards, JP3 is for setting USB 1-4 that are at the rear I/O panel. USB 3-4 are not present at the rear I/O pane ...

  • Intel G4H875-C - page 33

    33 2 Hardware Installation 2 1 O N 2.4.4 P o w e r -on Select ! 1-2 On: Power-on via power button (default) 3 1 2 3 1 2 JP6 2-3 On: Power-on via AC power This jumper is used to select the method of powering on the system. If you want the system to po wer -on once A C power comes in, set JP6 pins 2 and 3 to On. If you want to use the power button, s ...

  • Intel G4H875-C - page 34

    34 2 Hardware Installation SW1 is used to configure the BIOS Wr ite Protect function. When this function is enabled, the system will be protected from unneces- sar y updating or flashing of the BIOS. It secures the BIOS therefore any updates to it will not take effect. 1 On: The BIOS is basically protected but will allow you to update changes ONL Y ...

  • Intel G4H875-C - page 35

    35 2 Hardware Installation 2.5 Rear Panel I/O Ports PS/2 K/B COM 1 USB 1-2 USB 3-4 COM 2 PS/2 Mouse LAN 2 Parallel LAN 1 Line-out Line-in Mic-in G4H875-N PS/2 K/B COM 1 USB 1-2 COM 2 PS/2 Mouse Parallel LAN Line-out Line-in Mic-in G4H875-B PS/2 Mouse LAN Parallel USB 4 Line-out Line-in Mic-in PS/2 K/B COM 1 USB 1-2 USB 3 COM 2 G4H875-C ...

  • Intel G4H875-C - page 36

    36 2 Hardware Installation 2 1 O N 2.5.1 PS/2 Mouse and PS/2 K eyboard P or ts The system board is equipped with an onboard PS/2 mouse (Green) and PS/2 keyboard (Purple) por ts - both at location CN1 of the system board. The PS/2 mouse por t uses IRQ12. If a mouse is not connected to this por t, the system will reser ve IRQ12 f or other expansion c ...

  • Intel G4H875-C - page 37

    37 2 Hardware Installation 2 1 ON COM 1 COM 2 2.5.2 Serial Ports " G4H875-N is equipped with 2 onboard ser ial por ts (COM 1: CN3 and COM 2: CN4) - both in T eal/T urquoise color . It is also equipped with two 9-pin connectors (COM 3: J14 and COM 4: J16) for connecting exter nal serial por ts. G4H875-C and G4H875-B are each equipped with COM 1 ...

  • Intel G4H875-C - page 38

    38 2 Hardware Installation 2 1 ON 2.5.3 Parallel Port The system board has a standard par allel por t (Burgundy) at location CN7 for interfacing your PC to a parallel pr inter . It sup- por ts SPP , ECP and EPP . Setting SPP (Standard Parallel P o r t) ECP (Extended Capabilities P or t) EPP (Enhanced Pa r allel P or t) Function Allows normal speed ...

  • Intel G4H875-C - page 39

    39 2 Hardware Installation 2 1 ON 2.5.4 Universal Serial Bus Ports The system board suppor ts USB 2.0/1.1 por ts. USB allows data exchange between your computer and a wide range of simulta- neously accessible external Plug and Play peripherals. G4H875-N and G4H875-C are each equipped with four onboard USB 2.0/1.1 por ts (Black) are at locations CN5 ...

  • Intel G4H875-C - page 40

    40 2 Hardware Installation BIOS Setting Configure USB in the Integrated P er ipher als submenu (“Onboard Device” section) of the BIOS. Refer to chapter 3 for more informa- tion. Driver Installation Y ou may need to install the proper driver s in y our oper ating system to use the USB device . Refer to your operating system’ s manual or docume ...

  • Intel G4H875-C - page 41

    41 2 Hardware Installation 2.5.5 RJ45 LAN Port G4H875-N is equipped with 2 onboard RJ45 LAN por ts. LAN 1 which is controlled by the Intel 82551QM chip is at location CN6 and LAN 2 which is controlled by the Intel Gigabit 82547EI chip is at location CN5. G4H875-C and G4H875-B are each equipped with the LAN 1 por t only . LAN allows the system board ...

  • Intel G4H875-C - page 42

    42 2 Hardware Installation 2 1 ON Line-out Line-in Mic-in " 2.5.6 Audio " Front audio Mic-in, Line-in and Line-out The mic-in, line-in and line-out jacks are at location CN2 of the system board. A jack is a one-hole connecting interface f or inser t- ing a plug. • Mic-in Jack (Pink) This jack is used to connect an external microphone. ? ...

  • Intel G4H875-C - page 43

    43 2 Hardware Installation The front audio is disabled. The rear audio is enabled. The front audio is enabled. The rear audio is disabled. Pins 5-6 and 9-10 shor t (default) Pins 5-6 and 9-10 open Front Audio The front audio connector (J3) allows you to connect to the line-out and mic-in jacks that are at the front panel of your sys- tem. Using thi ...

  • Intel G4H875-C - page 44

    44 2 Hardware Installation 2 1 O N 2.6 I/O Connectors 2.6.1 Game/MIDI Port The system board is equipped with a 15-pin connector at loca- tion J2 for connecting an external game/MIDI por t. The game/ MIDI por t may be mounted on a card-edge bracket. Install the card-edge bracket to the system chassis then connect the game/ MIDI por t cab le to conne ...

  • Intel G4H875-C - page 45

    45 2 Hardware Installation 2 1 O N 2.6.2 Internal Audio Connectors The CD-in (J1) and AUX-in (J4) connector s are use d to receive audio from a CD-ROM drive, TV tuner or MPEG card. 14 Right audio channel Left audio channel Ground Ground 14 Right audio channel Left audio channel Ground Ground AUX-in CD-in " ...

  • Intel G4H875-C - page 46

    46 2 Hardware Installation 2 1 ON 2.6.3 S/PDIF Connector " The S/PDIF connector (J5) is used to connect external S/PDIF por ts. The S/PDIF por ts may be mounted on a card-edge bracket. Install the card-edge bracket to the system chassis then connect the audio cable connector to J5. Make sure pin 1 of the audio cable connector is aligned with p ...

  • Intel G4H875-C - page 47

    47 2 Hardware Installation 2 1 O N 2.6.4 Flopp y Disk Drive Connector The system board is equipped with a shrouded floppy disk drive connector for connecting a standard flopp y disk dr ive. T o prev ent improper floppy cable installation, the shrouded floppy disk header has a keying mechanism. The 34-pin connector on the floppy cable can be placed ...

  • Intel G4H875-C - page 48

    48 2 Hardware Installation 2 1 ON 2.6.5 Serial A T A Connectors Connect one end of the SA T A cable to J22 (SA T A 2) or J23 (SA T A 1) and the other end to your serial A T A device . BIOS Setting Configure the Serial A T A dr ives in the Integrated P er ipherals submenu (“OnChip IDE Device” section) of the BIOS. Refer to chapter 3 for more inf ...

  • Intel G4H875-C - page 49

    49 2 Hardware Installation 2 1 O N 2.6.6 IDE Disk Drive Connector The system board is equipped with two shrouded PCI IDE headers that will interface four Enhanced IDE (Integrated Drive Electronics) disk dr iv es. T o prevent improper IDE cable installation, each shrouded PCI IDE header has a keying mechanism. The 40-pin connector on the IDE cable c ...

  • Intel G4H875-C - page 50

    50 2 Hardware Installation Note: Refer to your disk drive user’s manual for information about selecting proper drive switch settings. Adding a Second IDE Disk Drive When using two IDE drives, one must be set as the master and the other as the slav e . Follow the instr uctions pro vided by the dr ive manufacturer f or setting the jumper s and/or s ...

  • Intel G4H875-C - page 51

    51 2 Hardware Installation 2 1 ON 2.6.7 IrD A Connector Connect your IrD A cable to connector J7 on the system board. Note: The sequence of the pin functions on some IrDA cable may be reversed from the pin function defined on the system board. Make sure to connect the cable to the IrDA connector according to their pin functions. BIOS Setting Config ...

  • Intel G4H875-C - page 52

    52 2 Hardware Installation 2 1 O N ! 2.6.8 Cooling Fan Connectors Connect the CPU fan’ s cable connector to the CPU fan connec- tor (J13) on the system board. Connect the Intel 875P fan’ s cable connector to the NB fan connector (J27) on the system board. The chassis fan (J19) and second fan (J25) connector s are used to connect additional cool ...

  • Intel G4H875-C - page 53

    53 2 Hardware Installation 2 1 ON 2.6.9 W ake-On-LAN Connector Y our LAN card package should include a cable. Connect one end of the cable to the wakeup header on the card and the other end to location J10 on the system board. The network will detect Magic Pac ket and asser t a wake up signal to po wer -up the system. Refer to the add-in card’ s ...

  • Intel G4H875-C - page 54

    54 2 Hardware Installation 2 1 ON 2.6.10 Chassis Open Connector 2 1 Ground Chassis signal " The system board suppor ts the chassis intrusion detection func- tion. T o use this function, connect the chassis intr usion sensor cable from the chassis to J6. Whenever a chassis component has been remov ed, the sensor sends signal to J6 aler ting you ...

  • Intel G4H875-C - page 55

    55 2 Hardware Installation 2 1 ON 2.6.11 LEDs DIMM Standby Power LED This LED will turn red when the system’ s pow er is on or when it is in the Suspend state (P ow er On Suspend or Suspend to RAM). It will not light when the system is in the Soft-Off state. PCI Standby Power LED This LED will turn red when the system is in the power -on, Soft- O ...

  • Intel G4H875-C - page 56

    56 2 Hardware Installation Ear ly program chipset reg- ister before POST . T esting memor y presence. Detecting memor y siz e . No memor y present. Programming DRAM tim- ing register . Calculating DRAM size variable including row , col- umn and bank. Initializing JEDEC of cur - rent DRAM row . Checking CMOS checksum and batter y . Initializing the ...

  • Intel G4H875-C - page 57

    57 2 Hardware Installation 2 1 ON 2.6.12 Power Connectors W e recommend that you use a po wer supply that complies with the A TX12V P ower Suppl y Design Guide V er sion 1.1. An A TX12V pow er supply has a standard 20-pin A TX main power connector and a 4-pin +12V power connector that m ust be inser ted onto CN9 and CN8 connector s respectively . T ...

  • Intel G4H875-C - page 58

    58 2 Hardware Installation 2 1 ON 2.6.13 Front Panel Connectors HD-LED: Primary/Secondary IDE LED This LED will light when the hard drive is being accessed. RESET: Reset Switch This switch allows you to reboot without having to power off the system thus prolonging the life of the power supply or system. SPEAKER: Speaker Connector This connects to t ...

  • Intel G4H875-C - page 59

    59 2 Hardware Installation PWR-LED: Power/Standby LED When the system’ s power is on, this LED will light. When the system is in the S1 (POS - P ower On Suspend) state, it will blink ev er y second. When the system is in the S3 (STR - Suspend T o RAM) state , it will blink ever y second. Note: If a system did not boot-up and the P ower/Standby LE ...

  • Intel G4H875-C - page 60

    60 3 BIOS Setup 3.1 A ward BIOS Setup Utility The Basic Input/Output System (BIOS) is a program that takes care of the basic level of communication between the processor and peripherals. In addition, the BIOS also contains codes for various advanced features found in this system board. This chapter explains the Setup Utility for the Award BIOS. Aft ...

  • Intel G4H875-C - page 61

    61 3 BIOS Setup The settings on the screen are for reference only . Y our ver sion may not be identical to this one. 3.1.1.1 Date The date format is <day>, <month>, <date>, <year>. Day displays a day , from Sunday to Saturday . Month displays the month, from Januar y to December . Date displays the date , from 1 to 31. Y ear ...

  • Intel G4H875-C - page 62

    62 3 BIOS Setup The settings on the screen are for reference only . Y our ver sion may not be identical to this one. IDE HDD Auto Detection Detects the parameter s of the drive. The par ameter s will automati- cally be shown on the screen. IDE Channel 0 Master/Slave and IDE Channel 1 Master/Slave The drive type information should be included in the ...

  • Intel G4H875-C - page 63

    63 3 BIOS Setup Capacity Displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk checking program. Cylinder This field displa ys the number of cylinder s. Head This field displays the number of read/write heads. Precomp This field displa ys the number of cylinder s ...

  • Intel G4H875-C - page 64

    64 3 BIOS Setup 3.1.1.5 Video This field selects the type of video adapter used for the primar y system monitor . Although secondar y monitor s are suppor ted, you do not hav e to select the type . The default setting is EGA/V GA. EGA/VGA Enhanced Gr aphics Adapter/Video Gr aphics Ar ray . For EGA, V GA, SV GA and PGA monitor adapter s. CGA 40 Colo ...

  • Intel G4H875-C - page 65

    65 3 BIOS Setup 3.1.1.8 Extended Memory Displays the amount of extended memor y detected dur ing boot-up . 3.1.1.9 T otal Memor y Displays the total memor y availab le in the system. ...

  • Intel G4H875-C - page 66

    66 3 BIOS Setup 3.1.2 Advanced BIOS Featur es The Advanced BIOS Features allows y ou to configure y our system for basic operation. Some entries are defaults required by the system board, while other s, if enabled, will improve the perf or mance of your system or let you set some features according to your preference. The screen abov e list all the ...

  • Intel G4H875-C - page 67

    67 3 BIOS Setup 3.1.2.4 CPU L3 Cache This field is used to enab le or disable the CPU’ s L3 cache . 3.1.2.5 Hyper -Threading T echnolog y (for Intel ® P entium ® 4 Processor with Hyper -Threading T echnolog y onl y ) This field is used to enab le the functionality of the Intel ® P entium ® 4 Processor with Hyper -Threading T echnology and wil ...

  • Intel G4H875-C - page 68

    68 3 BIOS Setup 3.1.2.10 Gate A20 Option This entr y allows y ou to select how gate A20 is handled. Gate A20 is a device used to address memor y above 1 Mbyte. Initially , gate A20 was handled via the keyboard controller . T oday , while keyboards still provide this suppor t, it is more common, and much faster , for the system chipset to provide su ...

  • Intel G4H875-C - page 69

    69 3 BIOS Setup 3.1.2.14 Security Option This field determines when the system will prompt for the password - ever ytime the system boots or only when you enter the BIOS setup. Set the password in the Set Super visor/User Password submenu. System The system will not boot and access to Setup will be denied unless the correct password is entered at t ...

  • Intel G4H875-C - page 70

    70 3 BIOS Setup 3.1.3 Advanced Chipset Features This section gives you functions to configure the system based on the specific f eatures of the chipset. The chipset manages bus speeds and access to system memor y resources. These items should not be alter ed unless necessar y . The default settings hav e been chosen because they provide the best op ...

  • Intel G4H875-C - page 71

    71 3 BIOS Setup Manual If you want y our system to r un at a perfor mance better than the one “by SPD”, select “Manual” then select the best option in the “C AS Latency Time” to “DRAM RAS# Precharge” fields. 3.1.3.2 CAS Latency Time This field is used to select the local memor y clock per iods. 3.1.3.3 Active to Pr echarge Delay The ...

  • Intel G4H875-C - page 72

    72 3 BIOS Setup 3.1.3.8 System BIOS Cacheable When this field is enabled, accesses to the system BIOS ROM addressed at F0000H-FFFFFH are cached, provided that the cache controller is enabled. The larger the r ange of the Cache RAM, the higher the efficiency of the system. 3.1.3.9 Video BIOS Cacheable As with caching the system BIOS, enabling the Vi ...

  • Intel G4H875-C - page 73

    73 3 BIOS Setup 3.1.3.13 DRAM Data Integrity Mode The ECC (Er ror Checking and Correction) function is suppor ted only in x72 (72-bit) PC SDRAM DIMMs. If you are using x64 (64-bit) PC SDRAM DIMMs, set this field to Non-ECC . Non-ECC Uses x64 PC SDRAM DIMM. ECC This option allows the system to reco ver from memor y failure . It detects single-bit an ...

  • Intel G4H875-C - page 74

    74 3 BIOS Setup 3.1.4 Integrated Peripherals The settings on the screen are for reference only . Y our ver sion ma y not be identical to this one. 3.1.4.1 OnChip IDE Device Mov e the cur sor to this f ield and press <Enter>. The following screen will appear . The settings on the screen are for reference onl y . Y our ver sion may not be ident ...

  • Intel G4H875-C - page 75

    75 3 BIOS Setup IDE HDD Block Mode Enabled The IDE HDD uses the block mode. The system BIOS will check the hard disk drive for the maximum block size the system can transfer . The block size will depend on the type of hard disk drive. Disabled The IDE HDD uses the standard mode. IDE DMA T ransfer Access This field, when Enabled, will enhance the ID ...

  • Intel G4H875-C - page 76

    76 3 BIOS Setup IDE Primary Master/Slave UDMA and IDE Secondary Master/ Slave UDMA These fields allo w you to set the Ultra DMA in use . When Auto is selected, the BIOS will select the best available option after checking your hard drive or CD-ROM. Auto The BIOS will automatically detect the settings for you. Disabled The BIOS will not detect these ...

  • Intel G4H875-C - page 77

    77 3 BIOS Setup 3.1.4.2 Onboard Device Mov e the cur sor to this f ield and press <Enter>. The following screen will appear . The settings on the screen are for reference only . Y our ver sion ma y not be identical to this one. USB Controller Enabled Enables the onboard USB. Disabled Disables the onboard USB. USB 2.0 Controller If you are usi ...

  • Intel G4H875-C - page 78

    78 3 BIOS Setup 3.1.4.3 Super IO Device Mov e the cur sor to this f ield and press <Enter>. The following screen will appear . The settings on the screen are for reference only . Y our v er sion may not be identical to this one. Power On Function This field allo ws you to use the keyboard or PS/2 mouse to po wer - on the system. Button only D ...

  • Intel G4H875-C - page 79

    79 3 BIOS Setup Keyboard 98 When this option is selected, press the “wake up” key of the Windows  98 compatible keyboard to power -on the system. KB Power On Password Mov e the cur sor to this field and press <Enter>. Enter your pass- word. Y ou can enter up to 5 char acter s. T ype in exactly the same password to confirm, then press & ...

  • Intel G4H875-C - page 80

    80 3 BIOS Setup RxD , TxD Active The options are Hi, Lo; Lo, Hi; Lo, Lo; and Hi, Hi. IR T ransmission Dela y If this field is Enabled, transmission of data will be slower . This is recommended when you encounter transmission problem with your device . The options are: Enabled and Disabled. UR2 Duplex Mode Half Data is completely transmitted before ...

  • Intel G4H875-C - page 81

    81 3 BIOS Setup If you selected EPP , the “EPP Mode Select” field is selectab le . If you selected ECP , the “ECP Mode Use DMA” field is selectab le . If you selected ECP+EPP , both “EPP Mode Select” and “ECP Mode Use DMA” are selectable. EPP Mode Select This field is used to select the EPP mode of the parallel por t. ECP Mode Use D ...

  • Intel G4H875-C - page 82

    82 3 BIOS Setup Onboard Serial Port 3 (G4H875-N only) This field is used to select the serial por t 3’ s I/O address. Onboard Serial Port 3 IRQ (G4H875-N only) This field is used to select the serial por t 3’ s IRQ address. This field is not configurable if the “Onboard Ser ial P or t 3” field is set to Disabled. Onboard Serial Port 4 (G4H8 ...

  • Intel G4H875-C - page 83

    83 3 BIOS Setup 3.1.5 Power Management Setup The P ower Management Setup allo ws you to conf igure your system to most effectiv ely sav e ener gy . 3.1.5.1 A CPI Function This function should be enabled only in operating systems that sup- por t A CPI. Currently , only Windows ® ® ® ® ® 98SE/2000/ME/XP suppor ts this function. If you want to us ...

  • Intel G4H875-C - page 84

    84 3 BIOS Setup 3.1.5.3 Run V GABIOS if S3 Resume When this field is set to Auto, the system will initialize the V GA BIOS when it wakes up from the S3 state. This can be configured only if the “A CPI Suspend T ype” field is set to “S3(STR)”. 3.1.5.4 Power Management This field allows you to select the type (or degree) of power saving by ch ...

  • Intel G4H875-C - page 85

    85 3 BIOS Setup 3.1.5.8 MODEM Use IRQ This field is used to set an IRQ channel for the modem installed in your system. 3.1.5.9 Suspend Mode This is selectable onl y when the P ow er Management field is set to User Define. When the system enter s the Suspend mode according to the power saving time selected, the CPU and onboard peripherals will be sh ...

  • Intel G4H875-C - page 86

    86 3 BIOS Setup 3.1.5.12 W ake-Up b y PCI Card Enabled This field should be set to Enabled only if your PCI card such as LAN card or modem card uses the PCI PME (P ow er Management Event) signal to remotely wake up the system. Access to the LAN card or PCI card will cause the system to wake up. Refer to the card’ s documentation for more informat ...

  • Intel G4H875-C - page 87

    87 3 BIOS Setup 3.1.5.17 Resume By Alarm Enabled When Enabled, you can set the date and time you would lik e the Soft P ow er Down (Soft-Off) PC to pow er -on in the “Date (of Month) Alarm” and “Time (hh:mm:ss) Alar m” fields. Howev er , if the system is being accessed by incoming calls or the netw or k (Resume On Ring/LAN) prior to the dat ...

  • Intel G4H875-C - page 88

    88 3 BIOS Setup 3.1.6 PnP/PCI Configurations This section descr ibes conf igur ing the PCI bus system. It covers some ver y technical items and it is strongly recommended that only exper ienced users should make any changes to the default settings. The settings on the screen are for reference only . Y our ver sion may not be identical to this one. ...

  • Intel G4H875-C - page 89

    89 3 BIOS Setup 3.1.6.3 IRQ Resources Mov e the cur sor to this field and press <Enter>. The “IRQ-3” to “IRQ-15” fields will appear . Set each system inter r upt to either PCI Device or Reser ved. 3.1.6.4 PCI/V GA Palette Snoop This field determines whether the MPEG ISA/VESA V GA cards can wor k with PCI/V GA or not. The default value ...

  • Intel G4H875-C - page 90

    90 3 BIOS Setup 3.1.7 PC Health Status 3.1.7.1 Shutdown T emperatur e Y ou can prevent the system from ov erheating by selecting a tem- perature in this field. If the system detected that its temperature exceeded the one set in this field, it will automatically shutdown. 3.1.7.2 Cu rr ent System T emperature , Current CPU T emperature , Chassis Fan ...

  • Intel G4H875-C - page 91

    91 3 BIOS Setup 3.1.7.4 VCC3(V), +12(V), -12(V), VCC(V), VB A T(V) and 5VSB(V) These fields show the output v oltage of the power suppl y . Note: The onboard hardware monitor function is capable of detecting “system health” conditions but if you want a warning message to pop-up or a warning alarm to sound when an abnormal condition occurs , you ...

  • Intel G4H875-C - page 92

    92 3 BIOS Setup 3.1.8 Frequency/V oltage Contr ol The settings on the screen are for reference only . Y our ver sion may not be identical to this one. 3.1.8.1 CPU Clock Ratio This field is used to select the CPU’ s frequency r atio . Important: The frequency ratio of some processors may have been locked by the manufacturer . If you are using this ...

  • Intel G4H875-C - page 93

    93 3 BIOS Setup 3.1.8.5 CPU Clock This field provides several options for selecting the external system bus clock of the processor . The available options allo w you to adjust the processor’ s bus clock by 1MHz increment. Important: Selecting an external bus clock other than the default setting may result to the processor’s or system’s instab ...

  • Intel G4H875-C - page 94

    94 3 BIOS Setup 3.1.9 Load Fail-Safe Defaults The “Load Fail-Safe Defaults” option loads the troubleshooting default values permanently stored in the ROM chips. These settings are not optimal and turn off all high perfor mance features. Y ou should use these values only if you have hardware problems. Highlight this option in the main menu and p ...

  • Intel G4H875-C - page 95

    95 3 BIOS Setup 3.1.10 Load Optimized Defaults The “Load Optimized Defaults” option loads optimized se ttings from the BIOS ROM. Use the default values as standard values for your system. Highlight this option in the main menu and press <Enter>. T ype <Y> and press <Enter> to load the Setup default values. ...

  • Intel G4H875-C - page 96

    96 3 BIOS Setup 3.1.11 Set Supervisor Password If you want to protect your system and setup from unauthorized entr y , set a super visor’s passw ord with the “System” option selected in the Advanced BIOS Features. If you want to protect access to setup only , but not your system, set a super visor’s passw ord with the “Setup” option sel ...

  • Intel G4H875-C - page 97

    97 3 BIOS Setup 3.1.12 Set User Password If you want another user to ha ve access only to your system but not to setup, set a user’ s password with the “System” option se- lected in the Advanced BIOS Features. If you want a user to enter a password when tr ying to access setup, set a user’ s password with the “Setup” option selected in ...

  • Intel G4H875-C - page 98

    98 3 BIOS Setup 3.1.13 Sa ve & Exit Setup When all the changes hav e been made , highlight “Save & Exit Setup” and press <Enter>. T ype “Y” and press <Enter>. The modifications y ou hav e made will be wr itten into the CMOS memor y , and the system will reboot. Y ou will once again see the initial diagnostics on the scre ...

  • Intel G4H875-C - page 99

    99 3 BIOS Setup 3.1.14 Exit Without Sa ving When you do not want to save the changes you have made, highlight “Exit Without Saving” and press <Enter>. T ype “Y” and press <Enter>. The system will reboot and y ou will once again see the initial diagnostics on the screen. If you wish to make any changes to the setup , press <Ct ...

  • Intel G4H875-C - page 100

    100 3 BIOS Setup 3.2 Updating the BIOS T o update the BIOS, you will need the new BIOS file and a flash utility , A WDFLASH.EXE. Please contact technical suppor t or y our sales representative for the files. Note: A WDFLASH.EXE wor ks only in DOS mode. 1 . Save the new BIOS file along with the flash utility A WDFLASH.EXE to a floppy disk. 2 . Reboo ...

  • Intel G4H875-C - page 101

    101 3 BIOS Setup 6 . The following will appear . Do Y ou W ant to Sav e BIOS (Y/N) This question refers to the cur rent existing BIOS in your system. W e recommend that you sa ve the current BIOS and its flash utility; just in case you need to reinstall the BIOS. T o sav e the current BIOS, press <Y> then enter the file name of the current BI ...

  • Intel G4H875-C - page 102

    102 4 Supported Software 4.1 Desktop Management Interface (DMI) The system board comes with a DMI built into the BIOS. DMI, along with the appropriately networ ked software , is designed to make inv entor y , maintenance and troubleshooting of computer sys- tems easier . With DMI, a networ k administrator or MIS engineer can remotely access some in ...

  • Intel G4H875-C - page 103

    103 4 Supported Software 4.1.2 Using the DMI Utility The four menus located on top of the DMI Configuration Utility screen are Edit DMI, Add DMI, Load DMI File and Sa ve DMI File . Use the ← or → (left or right) arrow keys to select a menu from the Menu bar . On the left side of the screen is a list of the system configuration items. Use the ? ...

  • Intel G4H875-C - page 104

    104 4 Supported Software Add DMI 1. Use the ← or → ar ro w keys to select the Add DMI menu. 2. Highlight the item on the left screen that you would like to add by using the ↑ or ↓ arrow keys, then press <Enter>. 3. The cur sor will mov e to the screen y ou select allowing y ou to enter information about the added item. 4. Press <F1 ...

  • Intel G4H875-C - page 105

    105 4 Supported Software 4.2 Drivers, Utilities and Softwar e Applications The CD that came with the system board contains driver s, utilities and software applications required to enhance the performance of the system board. Inser t the CD into a CD-ROM drive. The autor un screen (Main Board Utility CD) will appear . If after inser ting the CD , & ...

  • Intel G4H875-C - page 106

    106 4 Supported Software 4.2.1 Intel 875 INF Update Utility The Intel 875 INF Update Utility is used for updating Windows  98SE/2000/ME/XP's INF files so that the Intel chipset can be recognized and conf igured proper l y in the system. T o install the utility , please follow the steps belo w . 1 . Click “Intel 875 INF Update Utility” o ...

  • Intel G4H875-C - page 107

    107 4 Supported Software 4.2.2 Intel LAN Drivers T o install the driver , please follo w the steps below . 1 . Click “Intel LAN Dr ivers” on the main menu. 2 . Click “Wired LAN Adapter s”. The following screen will appear . 3 . Click “Install Software”. This will install the LAN application software . After installing the software , r u ...

  • Intel G4H875-C - page 108

    108 4 Supported Software 4.2.3 Intel USB 2.0 Drivers If you are using a USB 2.0 device, you must install the USB 2.0 driver . The dr ivers are suppor ted in the follo wing operating systems: Windows  98 SE, Windows  ME and Windows  2000. T o install the dr iver , please follow the steps belo w . 1 . Click “Intel USB 2.0 Dr ivers” on th ...

  • Intel G4H875-C - page 109

    109 4 Supported Software Important: If you are using W indo ws ® ® ® ® ® XP , you must install the Windows Ser vice P ack 1 USB 2.0 dr iver which comes av ailable after you have installed the operating system. 2 . Follow the installation instr uctions shown on the screen. 3 . Reboot the system for the driver to take effect. Windows  2000 do ...

  • Intel G4H875-C - page 110

    110 4 Supported Software 4.2.4 Au d i o Dr i v e r s The audio dr ivers are suppor ted in the following operating sys- tems: Windows  98SE, Windows  ME, Windows NT  4.0, Windows  2000 and Windows  XP . T o install the driver , please follo w the steps below . 1 . Click “Audio Dr ivers”. The following screen will appear . 2 . Foll ...

  • Intel G4H875-C - page 111

    111 4 Supported Software 4.2.5 Microsoft DirectX 9 T o install, please follo w the steps below . 1 . Click “Microsoft DirectX 9” on the main menu. The following screen will appear . 2 . Click “I accept the agreement” then click “Next”. 3 . Follow the prompts on the screen to complete installation. 4 . Reboot the system for the driver to ...

  • Intel G4H875-C - page 112

    112 4 Supported Software 4.2.6 Hardware Doctor Hardware Doctor is capable of monitoring the system’s hardware conditions such as the temperature of the CPU and system, volt- age, and speed of the cooling fans. It also allows you to manually set a range to the items being monitored. If the values are over or under the set range , a war ning messag ...

  • Intel G4H875-C - page 113

    113 4 Supported Software 4.3 Installation Notes 1. "Autor un" ONL Y suppor ts the Windows  98 SE, Windows  ME, Windows  2000, Windows NT  4.0 and Windows  XP oper ating systems. If after inser ting the CD , "Autor un" did not automatically star t (which is, the Main Board Utility CD screen did not appear), please ...

  • Intel G4H875-C - page 114

    A 114 Enabling Hyper -Threading T echnolog y A . 1 Enabling Hyper -Thr eading T echnolog y T o enable the functionality of the Hyper -Threading T echnology , please follo w the requirements and steps below . Basically , the follo wing presumes that you ha ve already installed an Intel ® P entium ® 4 Processor with Hyper -Threading T echnology . 1 ...

  • Intel G4H875-C - page 115

    A Enabling Hyper -Threading T echnolog y 115 d. Now click the Hardware tab then click Device Manager . The items shown under Computer and Processors should resemble the ones shown belo w . c. Click the Gener al tab . The processor shown under Computer should resemble the one shown belo w . ...

  • Intel G4H875-C - page 116

    A 116 Enabling Hyper -Threading T echnolog y e. Lastly , press the <Ctr l> <Alt> and <Del> keys simultaneously . The Windows T ask Manager dialog box will appear . Click the P erfor mance tab . The diagr am under CPU Usage Histor y should resemble the one shown below . ...

  • Intel G4H875-C - page 117

    B CPU Fan Protection 117 The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circulation across the CPU and heat sink, the CPU will overheat damaging both the CPU and system board. The system board suppor ts the CPU Fan Protection function. It has the capability of monitoring the CPU fan when the system boots. Once i ...

  • Intel G4H875-C - page 118

    C 118 CPU T emperature Protection The CPU T emper ature Protection function has the capability of monitor ing the CPU’ s temper ature dur ing system boot-up . T o use the CPU T emper ature Protection function, please follow the steps below . 1 . Select the “PC Health Status” submenu in the BIOS. 2 . Set the “CPU T emp. Prot. Function” fie ...

  • Intel G4H875-C - page 119

    D System Error Message 119 When the BIOS encounter s an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 T O CONTINUE, CTRL-AL T -ESC or DEL T O ENTER SETUP , will be shown in the information box at the bottom. Enter Setup t ...

  • Intel G4H875-C - page 120

    D 120 System Error Message setting than indicated in Setup. Determine which setting is correct, either turn off the system and change the jumper or enter Setup and change the VIDEO selection. FLOPPY DISK(S) fail (80) Unable to reset floppy subsystem. FLOPPY DISK(S) fail (40) Floppy type mismatch. Hard Disk(s) fail (80) HDD reset failed. Hard Disk(s ...

  • Intel G4H875-C - page 121

    E T roubleshooting 121 E.1 T roubleshooting Checklist This chapter of the manual is designed to help you with problems that you ma y encounter with your per sonal computer . T o efficiently troubleshoot your system, treat each prob lem individually . This is to ensure an accurate diagnosis of the problem in case a problem has multiple causes. Some ...

  • Intel G4H875-C - page 122

    E 122 T roubleshooting The picture seems to be constantly moving. 1. The monitor has lost its ver tical sync . Adjust the monitor’s v er tical sync. 2. Move away any objects, such as another monitor or fan, that may be creating a magnetic f ield around the display . 3. Make sure your video card’ s output frequencies are suppor ted by this monit ...

  • Intel G4H875-C - page 123

    E T roubleshooting 123 Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is configured with two hard drives, make sure the bootable (f i r st) hard drive is configured as Master and the second hard drive is configured as Sla ve. The master hard dr ive must ha ve ...

  • Intel G4H875-C - page 124

    E 124 T roubleshooting Serial Port The serial device (modem, printer) doesn’ t output anything or is outputting garbled characters. 1 . Make sure that the ser ial device’ s power is turned on and that the device is on-line. 2 . V e rify that the device is plugged into the cor rect ser ial por t on the rear of the computer . 3. V er ify that the ...

Manufacturer Intel Category Personal Computer

Documents that we receive from a manufacturer of a Intel G4H875-C can be divided into several groups. They are, among others:
- Intel technical drawings
- G4H875-C manuals
- Intel product data sheets
- information booklets
- or energy labels Intel G4H875-C
All of them are important, but the most important information from the point of view of use of the device are in the user manual Intel G4H875-C.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Intel G4H875-C, service manual, brief instructions and user manuals Intel G4H875-C. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Intel G4H875-C.

Similar manuals

A complete manual for the device Intel G4H875-C, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Intel G4H875-C by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Intel G4H875-C.

A complete Intel manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Intel G4H875-C - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Intel G4H875-C, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Intel G4H875-C, that we can find in the current document
3. Tips how to use the basic functions of the device Intel G4H875-C - which should help us in our first steps of using Intel G4H875-C
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Intel G4H875-C
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Intel G4H875-C in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Intel G4H875-C?

Use the form below

If you did not solve your problem by using a manual Intel G4H875-C, ask a question using the form below. If a user had a similar problem with Intel G4H875-C it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)