English dropdown-ico

Manual Miele CS 1122

40 pages 1.59 mb
Download

Go to site of 40

Summary
  • Miele CS 1122 - page 1

    Operating and Installation Instructions Ceramic Combiset CS 1112 CS 1122 To prevent accidents and appliance damage, read these instructions before installation or use. M.-Nr. 07 346 400 e n-U S ...

  • Miele CS 1122 - page 2

    IMPORTANT SAFETY INSTRUCTIONS .................................3 Description of the combiset .........................................7 CS 1112 ..........................................................7 CS 1122 ..........................................................8 Before using for the first time ........................................9 Clea ...

  • Miele CS 1122 - page 3

    WARNING- When using your appliance follow basic precautions, including the following: Read all instructions before installation or use to prevent injury and appliance damage. This appliance conforms to all uniform safety codes and regulations. Keep these operating instructions in a safe place and pass them on to any future user. SAVE THESE INSTRUCT ...

  • Miele CS 1122 - page 4

    Technical safety ~ Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and may void the warranty. ~ Be sure your appliance is properly installed and grounded by a qualified technician. ~ Before installing the combiset, check for externally visible dam ...

  • Miele CS 1122 - page 5

    Safety ~ DO NOT TOUCH THE COOKING AREA OR THE VICINITY AROUND THE COOKING AREA - During operation, the cooking area and its surroundings will get hot and can cause burns. When the combiset is shut off, the surface may remain hot enough to cause harm although the glow is not visible through the dark glass. During and after use, do not touch or let c ...

  • Miele CS 1122 - page 6

    ~ Be careful not to drop anything on the ceramic surface of the combiset. Even lightweight objects may cause damage. ~ Use the proper pan size. Select cookware with flat bottoms large enough to cover the heating element. Using undersized cookware will expose a portion of the heating element and may result in ignition of clothing or handles becoming ...

  • Miele CS 1122 - page 7

    CS 1112 a Variable burner : C 4" or 7" (100 mm or 180 mm) - Power: 700 W or 1800 W b Standard burner : C 5 11 / 16 " (145 mm) - Power: 1200 W c Burner indicators d Display Control knobs for the burners: f Standard burner (front) g Variable burner (rear) Indicators k On/Off indicator l Symbol for the outer-ring of the variable burner ...

  • Miele CS 1122 - page 8

    CS 1122 a Extended burner C 7" or 7" x 10 7 / 16 " (180 mm or 180 mm x 265 mm) - Power: 1500 W / 2400 W b Standard burner C 5 11 / 16 " (145 mm) - Power: 1200 W c Burner indicators d Display Control knobs for the burners: f Standard burner (front) g Extended burner (rear) Indicators k On/Off indicator l Extended burner indicator ...

  • Miele CS 1122 - page 9

    Clean the combiset ^ Before using for the first time, clean the appliance with a damp cloth and dry with a soft cloth. Do not use liquid dish soap to clean the combiset, this may cause permanent blue discolorations. Heat the combiset Metal components of the appliance have a protective coating which may give off a slight odor the first time the appl ...

  • Miele CS 1122 - page 10

    One-ring burners use one heating strip, and two-ring burners and grill zones use two heating strips. Depending on the model, the heating strips may be separated by a certain distance. See the illustrations. Every burner is equipped with overheat protection (inside temperature limiter), to prevent the glass ceramic combiset from overheating (see the ...

  • Miele CS 1122 - page 11

    Turning a burner On/Off ^ To turn a burner on , press the control knob down and turn it clockwise a to the desired setting. ^ To turn a burner off , turn the control knob counterclockwise b to "0". Do not turn a burner on without pressing the control knob down, and do not turn the knob past "12" or n to reach "0". This ...

  • Miele CS 1122 - page 12

    Residual Heat Indicator When a cooking zone is switched on, the On/Off indicator will light followed by the residual heat indicator. When the cooking zone is switched off, the On/Off indicator goes out. The residual heat indicator will turn off once the cooking zone is safe to the touch. Do not touch the burner or rest any objects on the combiset w ...

  • Miele CS 1122 - page 13

    Settings Use for Power level* Melt butter, chocolate, etc. Dissolving gelatine Prepare yogurt 1-2 Warming small quantities of food/liquid Keeping delicate dishes warm Cooking rice, Thawing frozen vegetables 1-3 Warming liquid or half-set foods Thickening sauces, e.g., hollandaise sauce Cooking rice pudding 3-5 Defrosting frozen foods Steaming veget ...

  • Miele CS 1122 - page 14

    Overheat protection Each cooking zone is equipped with a temperature limiter. This feature automatically turns off the heating element before the glass ceramic becomes too hot. Once the ceramic surface has cooled to a safe temperature the heating element will automatically turn back on. The overheat protection may be activated by: – turning on a ...

  • Miele CS 1122 - page 15

    Following these tips will allow you to make the most of your ceramic combiset. The cooking surface The ceramic combiset is made of an extremely hard and durable material. The surface is scratch resistant, not scratch proof. Avoid using cookware with ridged bottoms. Ridged pots with dirty or chipped enamel bottoms may scratch the combiset if they ar ...

  • Miele CS 1122 - page 16

    Copper bottom and aluminum pans may leave a residue on the combiset in the form of metallic lines. This is normal. These lines can be removed using a non-abrasive ceramic combiset cleaner or a shielded scraper blade. Be sure to clean the combiset after each use. Each time this residue is allowed to melt it becomes harder to remove and may mar the a ...

  • Miele CS 1122 - page 17

    Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit. Pressurized steam could cause permanent damage to the surface. Do not use any sharp pointed objects which could damage the seal between the ceramic surface, the surrounding frame and the countertop. Never use abrasive cleaners, ...

  • Miele CS 1122 - page 18

    Stainless steel Clean stainless steel surfaces with warm water and liquid dish soap applied with a non-abrasive sponge and then wipe dry with a soft cloth. Soak baked or hardened spills first to loosen them. Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner (available from Miele). To help prevent resoiling, a cond ...

  • Miele CS 1122 - page 19

    , Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or appliance damage. What if the appliance does not heat up after it is turned on? Possible fault Solution The circuit breaker has tripped. Check whether a fuse is blown. If the problem p ...

  • Miele CS 1122 - page 20

    In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. Adhere rating label sticker supplied with the appliance below. Technical Service 20 ...

  • Miele CS 1122 - page 21

    MieleCare (USA only) MieleCare , our Extended Service Contract program; gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership. MieleCare is the only Extended Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts. Only genuin ...

  • Miele CS 1122 - page 22

    22 ...

  • Miele CS 1122 - page 23

    Installation Instructions IMPORTANT: SAVE FOR THE LOCAL ELECTRICAL INSPECTOR'S USE To prevent accidents and appliance damage read these instructions before installation or use. ...

  • Miele CS 1122 - page 24

    Note to the installer: Please leave this instruction book with the consumer for the local electrical inspector’s use. The minimum distances given in these Installation Instructions must be observed in order to ensure safe operation. Failure to do so increases the risk of fire. The cabinetry and venting hood should be installed first to prevent da ...

  • Miele CS 1122 - page 25

    Safety distances above the appliance The minimum safety distance given by the hood manufacturer must be maintained between the combiset and the hood above it. See the installation instructions of the hood for these safety measurements. If the hood manufacturers instructions are not available or if flammable objects are installed over the combiset ( ...

  • Miele CS 1122 - page 26

    Safety distances to the sides of the appliance The appliance should only be installed as shown in the illustrations, while maintaining the required safety distances shown. Do not install the appliance between two tall cabinets, this is a fire hazard. A distance of at least 2" (50 mm) must be kept between the countertop cut-out and the rear wal ...

  • Miele CS 1122 - page 27

    Safety distance from the wall covering If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out and the covering, since high temperatures can damage these materials. If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out and the wall covering ...

  • Miele CS 1122 - page 28

    Installation dimensions CS 1112 a Spring clips b Appliance front c Installation height d Power supply box with connection cable ,L=7 8 3/4" (2000 mm) e Rating label Installation 28 ...

  • Miele CS 1122 - page 29

    Installation dimensions CS 1122 a Spring clips b Appliance front c Installation height d Power supply box with connection cable ,L=7 8 3/4" (2000 mm) e Rating label Installation 29 ...

  • Miele CS 1122 - page 30

    Cut out ^ Make the countertop cut-out for the desired number of appliances. Remember to maintain a minimum safety distance from the back wall , as well as from any tall unit or side wall to the left or right of the combiset. See also the "IMPORTANT INSTALLATION SAFETY INSTRUCTIONS". ^ Seal the cut surfaces with a suitable sealant to avoid ...

  • Miele CS 1122 - page 31

    Installation of multiple appliances When installing more than one combiset appliance, a support bar b must be installed between the appliances. Countertop cut-out two appliances For the installation of two appliances the width of the countertop cut-out D is the sum of A and C. A , B and C = appliance width 11 5/16", 15" or 22 11/16" ...

  • Miele CS 1122 - page 32

    Sample calculations for a countertop cut-out for three appliances A appliance width minus 5/16" (8 mm) B appliance width C appliance width minus 5/16" (8 mm) D Countertop cut-out 11" (280 mm) 11 5/16" (288 mm) 11" (280 mm) 33 3/8" (848 mm) 11" (280 mm) 15" (380 mm) 14 5/8" (372 mm) 40 5/8" (1032 mm) ...

  • Miele CS 1122 - page 33

    a Spring clips b Support bars c Space between support bar and countertop d Sealing strip The illustration represents the attachment of spring clips a and support bars b for 3 appliances. An additional support bar is required for each additional appliance. The position for attachment of an additional support bar depends on the width of appliance B . ...

  • Miele CS 1122 - page 34

    Attach the spring clips and support bars Wood or solid surface countertops ^ Place the supplied spring clips a and the support bars b at the marked positions as shown above, by laying them on the upper edge of the cut-out and then securing them with the 1 / 8 " x 1" (3.5 x 25 mm) screws (supplied). Installation 34 ...

  • Miele CS 1122 - page 35

    Granite countertop The screws are not needed for granite countertops. ^ Position and attach the spring clips a and support bars b with strong, double-sided tape c . ^ Coat the edges of the spring clips a , ^ and the space e between the support bars b and the countertop with silicone (supplied). Installation 35 ...

  • Miele CS 1122 - page 36

    Installing the appliance / appliances ^ Feed the power cord down through the cut-out. ^ Place the front edge of the appliance into the cut-out. ^ With a hand on each side of the appliance press down evenly on the edges until it clicks into position. When doing so make sure that the appliance seal sits tightly on the countertop to ensure it is seale ...

  • Miele CS 1122 - page 37

    Sealing The appliance must not be permanently sealed into the countertop when installed. The sealing strip under the edge of the appliance provides a sufficient seal for the countertop. If the appliance is sealed into position, the countertop or appliance could be damaged if it needs to be removed for maintenance or service. Tiled surfaces The grou ...

  • Miele CS 1122 - page 38

    , CAUTION: Before installation or servicing, disconnect the power supply by either removing the fuse, shutting off the main power or manually "tripping" the circuit breaker. Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and service by unquali ...

  • Miele CS 1122 - page 39

    Disposal of packing materials The cardboard box and packing materials are biodegradable and recyclable. Please recycle. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Danger of suffocation! Disposal of an old appliance Old appliances contain materials that can be recycled. Please contact ...

  • Miele CS 1122 - page 40

    Alteration rights reserved / 4509 For the most updated manual see the Miele web site. M.-Nr. 07 346 400 / 03 M.-Nr. 07 346 400 / 03 ...

Manufacturer Miele Category Cooktop

Documents that we receive from a manufacturer of a Miele CS 1122 can be divided into several groups. They are, among others:
- Miele technical drawings
- CS 1122 manuals
- Miele product data sheets
- information booklets
- or energy labels Miele CS 1122
All of them are important, but the most important information from the point of view of use of the device are in the user manual Miele CS 1122.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Miele CS 1122, service manual, brief instructions and user manuals Miele CS 1122. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Miele CS 1122.

Similar manuals

A complete manual for the device Miele CS 1122, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Miele CS 1122 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Miele CS 1122.

A complete Miele manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Miele CS 1122 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Miele CS 1122, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Miele CS 1122, that we can find in the current document
3. Tips how to use the basic functions of the device Miele CS 1122 - which should help us in our first steps of using Miele CS 1122
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Miele CS 1122
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Miele CS 1122 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Miele CS 1122?

Use the form below

If you did not solve your problem by using a manual Miele CS 1122, ask a question using the form below. If a user had a similar problem with Miele CS 1122 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)