English dropdown-ico

Manual Raymarine Heading Sensor

24 pages 0.21 mb
Download

Go to site of 24

Summary
  • Raymarine Heading Sensor - page 1

    Heading Sensor Owner’ s Handbook Document number: 8112 4 _3 Date: 1st May 2001 124_3cov.p65 09/05/01, 11:29 1 ...

  • Raymarine Heading Sensor - page 2

    Copyright © Raymarine Limited 2001 124_3cov.p65 09/05/01, 11:29 2 ...

  • Raymarine Heading Sensor - page 3

    i Preface Important information W ARNING Although your Heading Sensor is designed to give accurate and reliable performance, it should serve only as an aid to navigation and should never lead to the erosion of good seamanship. Always maintain a permanent watch and be aware of situations as they develop. EMC conformance All Raymarine equipment and a ...

  • Raymarine Heading Sensor - page 4

    ii Heading Sensor Owner ’ s Handbook 124_3pre.p65 09/05/01, 11:29 2 ...

  • Raymarine Heading Sensor - page 5

    iii Preface Contents Important information .......................................................... i W ARNING ......................................................................... i EMC conformance ............................................................. i Handbook information ....................................................... i Ch ...

  • Raymarine Heading Sensor - page 6

    iv Heading Sensor Owner ’ s Handbook Chapter 4: Calibration ......................................................... 11 4.1 Introduction ............................................................... 11 EMC Conformance ................................................... 11 4.2 Continuous Deviation Correction ............................. 11 4.3 ...

  • Raymarine Heading Sensor - page 7

    1 Chapter 1: Introduction Chapter 1: Intr oduction Thank you for purchasing a Raymarine product. We are sure your Heading Sensor will give you many years of trouble-free operation. This Heading Sensor is designed to provide reliable performance, even under the most demanding conditions. D5505-1 1.1 Handbook information This handbook contains import ...

  • Raymarine Heading Sensor - page 8

    2 Heading Sensor Owner ’ s Handbook 124_3c01.p65 09/05/01, 11:29 2 ...

  • Raymarine Heading Sensor - page 9

    3 Chapter 2: Maintenance & Fault Finding Chapter 2: Maintenance & F ault Finding 2.1 Servicing and Safety • Raymarine equipment should be serviced only by authorized Raymarine service technicians. They will ensure that service procedures and replacement parts used will not affect performance. There are no user serviceable parts in any Ray ...

  • Raymarine Heading Sensor - page 10

    4 Heading Sensor Owner ’ s Handbook 2.3 F ault Finding All Raymarine products are subjected to comprehensive test and quality assurance programmes, prior to packing and shipping. However, if your Heading Sensor should develop a fault , please refer to the following table to identify the most likely cause and the corrective action required to rest ...

  • Raymarine Heading Sensor - page 11

    5 Chapter 3: Installation Chapter 3: Installation This chapter describes how to install the Heading Sensor, using everyday hand tools. 3.1 Before you Begin Before you begin, make sure that you have the all the required components and tools (listed below) to hand. Note: Before attempting any installation, you should read the Electromagnetic Compatib ...

  • Raymarine Heading Sensor - page 12

    6 Heading Sensor Owner ’ s Handbook Although every effort has been taken to ensure that they will perform under all conditions, it is important to understand what factors could affect the operation of the product. The guidelines given here describe the conditions for optimum EMC performance, but it is recognized that it may not be possible to mee ...

  • Raymarine Heading Sensor - page 13

    7 Chapter 3: Installation D3548-2 Connections to Other Equipment If your Raymarine equipment is to be connected to other equipment using a cable not supplied by Raymarine, a suppression ferrite MUST always be attached to the cable near the Raymarine unit. 3.2 Siting the Heading Sensor The Heading Sensor must be fitted to a vertical or horizontal bu ...

  • Raymarine Heading Sensor - page 14

    8 Heading Sensor Owner ’ s Handbook X 0.3L to 0.5L 0.3L to 0.5L L L D194-2 The compass is normally bulkhead mounted below decks. However, it can be mounted above deck on steel vessels. Although it is weatherproof, performance may be impaired due to the increased motion if it is mounted above deck. 3.3 Installation Procedur e To install the headin ...

  • Raymarine Heading Sensor - page 15

    9 Chapter 3: Installation 5. Assemble the Heading Sensor (1) to the Heading Sensor mounting bracket (4). The shaft protruding from the base of the unit must click positively into the slot in the base of the mounting bracket. Note: The boat symbol embossed on the top of the active compass should be facing forwards . D5506-1 1 2 3 4 1 Heading Sensor ...

  • Raymarine Heading Sensor - page 16

    10 Heading Sensor Owner ’ s Handbook equipment, using a suitable connector block, as shown in the diagram below. A 16.25ft (5m) NMEA accessory cable is available for more distant connection if required. D5508-1 NMEA power Ground - - NMEA data + NMEA data Red Black Yellow Check the handbook supplied with NMEA 0183 compatible equipment, to determin ...

  • Raymarine Heading Sensor - page 17

    11 Chapter 4: Calibration Chapter 4: Calibration 4.1 Introduction The Raymarine Heading Sensor must be calibrated to ensure that the transmitted compass heading information is accurate. This procedure should be carried out before the unit is used as a navigational aid. The calibration consists of two components: • Compass Linearisation: This dete ...

  • Raymarine Heading Sensor - page 18

    12 Heading Sensor Owner ’ s Handbook To ensure that the compass has received accurate data, perform the following procedure: 1. Choose a calm day, and select an area of open water. Ideally, the current and tide effects should be at a minimum. 2. Calculate the size of circle you need to make in order to keep your turn rate down to not less than 45 ...

  • Raymarine Heading Sensor - page 19

    13 Chapter 4: Calibration 2. If the Heading Sensor ’ s readings are less than the actual readings, rotate the sensor slightly clockwise. If the Heading Sensor ’ s readings are greater than the actual readings, rotate the sensor slightly anti-clockwise. 3. Check the headings again, and repeat step 2 if required. 4. When the headings match, tight ...

  • Raymarine Heading Sensor - page 20

    14 Heading Sensor Owner ’ s Handbook 124_3c04.p65 09/05/01, 11:30 14 ...

  • Raymarine Heading Sensor - page 21

    15 Specification Heading Sensor Specification Dimensions: 90mm x 100mm x 130mm (3.5in x 3.9 in x 5.1in) Power Supply: 10 to 16V DC Power Consumption: 40mA Operating Temperature: -10 ° C to +70 ° C (14 ° F to 158 ° F) Weight: 450g (1 lb) Compatability: NMEA 0183 compatible equipment Accuracy: +/- 0.5 ° Gimbal Range: Pitch = +33 ° , Roll + 45 ? ...

  • Raymarine Heading Sensor - page 22

    16 Heading Sensor Installation Manual 124_3spe.p65 09/05/01, 11:30 16 ...

  • Raymarine Heading Sensor - page 23

    Docume nt number: 8406 4-8 Apri l 2001 Limited Warr anty Certificate Raymarine warrants each new Light Marine/De aler Distributor Product to be of good ma terial s and workmanship, and will re pair or exchange a ny parts proven to be defective in material and workma nship under normal u se for a period of 2 year s/24 mont hs from date of sale to en ...

  • Raymarine Heading Sensor - page 24

    Factory Service Centers United States of America UK, Eur ope, Middle East , Far E ast Raymarine In c 22 Cott on Road, Un it D Nashu a, NH 030 63-4219 , USA Raym ari ne Lt d Anchorage P ark, Ports mouth PO3 5TD , England T elepho ne: +1 603 881 5200 F ax: +1 603 864 47 56 www .ray ma rine .c om T elephone : +44 (0) 23 9269 3611 F a x: +44 (0)23 9 26 ...

Manufacturer Raymarine Category GPS Receiver

Documents that we receive from a manufacturer of a Raymarine Heading Sensor can be divided into several groups. They are, among others:
- Raymarine technical drawings
- Heading Sensor manuals
- Raymarine product data sheets
- information booklets
- or energy labels Raymarine Heading Sensor
All of them are important, but the most important information from the point of view of use of the device are in the user manual Raymarine Heading Sensor.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Raymarine Heading Sensor, service manual, brief instructions and user manuals Raymarine Heading Sensor. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Raymarine Heading Sensor.

Similar manuals

A complete manual for the device Raymarine Heading Sensor, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Raymarine Heading Sensor by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Raymarine Heading Sensor.

A complete Raymarine manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Raymarine Heading Sensor - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Raymarine Heading Sensor, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Raymarine Heading Sensor, that we can find in the current document
3. Tips how to use the basic functions of the device Raymarine Heading Sensor - which should help us in our first steps of using Raymarine Heading Sensor
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Raymarine Heading Sensor
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Raymarine Heading Sensor in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Raymarine Heading Sensor?

Use the form below

If you did not solve your problem by using a manual Raymarine Heading Sensor, ask a question using the form below. If a user had a similar problem with Raymarine Heading Sensor it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)