Manual Patton electronic 2450

11 pages 0.08 mb
Download

Go to site of 11

Summary
  • Patton electronic 2450 - page 1

    USER MANUAL MODEL 2450 56/64 Kbps, 4-Wire DDS & Clear Channel CSU/DSU SALES OFFICE (301) 975-1000 TECHNICAL SUPPORT (301) 975-1007 http://www .patton.com Part# 07M2450-B Doc# 099051UB Revised 3/12/97 CERTIFIED An ISO-9001 Certified Company ...

  • Patton electronic 2450 - page 2

    1.0 W ARRANTY INFORMA TION Patton Electronics warrants all Model 2450 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized ...

  • Patton electronic 2450 - page 3

    2.0 GENERAL INFORMA TION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected by Patton's qualified technicians. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Patton Electronics T echnical Support at (301) 975-1007. 2.1 FEA ...

  • Patton electronic 2450 - page 4

    Switch S1-3: Circuit Assurance On dedicated circuits, the transmitter and the CTS output can be configured to go On only when a working communication circuit is established. If Circuit Assurance is used, enable it on only one end of the communication link. Circuit S1-3 Assurance Description On Enabled CTS will go low and the transmitter will be hel ...

  • Patton electronic 2450 - page 5

    Switch S1-6: Front Panel Switch Enable/Disable Switch S1-6 determines whether the front panel switches may be used to perform diagnostic functions. S1-6 Activation Description Off Enabled Front panel switches may be used to activate/terminate diagnostics On Disabled Front panel switches will have no effect on operation of the unit Switch S1-7: DTE ...

  • Patton electronic 2450 - page 6

    5.0 OPERA TION Once you have configured the Model 2450 properly (see Section 3.0) and made line, DTE and power connections correctly (see Section 4.0), you are ready to operate the unit(s). (Note: the unit is operational as soon as power is applied–there is no power switch.) This section describes the LED status monitors, and use of the built-in ...

  • Patton electronic 2450 - page 7

    • “Error” glows red when errors are detected in test mode during the “51 1” and 51 1/E” tests. This indicator also glows during normal operation to indicated framing errors and/or bipolar violations in 64 Kbps mode, or invalid bipolar violations in 56 Kbps mode (see Figure 7, below). • “T est” glows red when the V .54 loopback tes ...

  • Patton electronic 2450 - page 8

    APPENDIX A P A TTON MODEL 2450 SPECIFICA TIONS DDS T ype: Dedicated T ransmission Format: Synchronous, full duplex Maximum Operating Distance: 18000 feet (3.4 miles) over 26 A WG twisted pair DTE Interface: RS-232 (DB-25 female), RS-422/530 (DB- 25 female), V .35 (M/34 female or DB-25 female) DDS Line Interface: RJ-48S jack Standards: A T&T 623 ...

  • Patton electronic 2450 - page 9

    APPENDIX D INTERF ACE PIN ASSIGNMENT DDS/CLEAR CHANNEL INTERF ACE The DDS/Clear Channel Interface is an RJ-48S modular jack. Pin # Signal 1 TX+ 2 TX- 3 no connection 4 no connection 5 no connection 6 no connection 7 RX+ 8 RX- MODEL 2450/C M/34 CONNECTOR (V .35), TERMINAL INTERF ACE Pin # Signal A Frame Ground B SGND (Signal Ground) CR T S D CTS E D ...

  • Patton electronic 2450 - page 10

    (APPENDIX D - Continued) MODEL 2450/A DB-25 CONNECTOR (RS-232/V .24), TERMINAL INTERF ACE Pin # Signal 1 Frame Ground 2T D 3R D 4R T S 5 CTS 6 DSR 7 SGND (Signal Ground) 8C D 15 TC 17 RC 18 LL (Local Loop) 21 RL (Remote Loop) 24 XTC 25 TM (T est Mode) MODEL 2450/B DB-25 CONNECTOR (RS-422/530), TERMINAL INTERF ACE Pin # Signal 1 Frame Ground 2 T ran ...

  • Patton electronic 2450 - page 11

    Dear V alued Customer, Thank you for purchasing Patton Electronics products! W e do appreciate your business. I trust that you f ind this user manual helpful. W e manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-po wered short range modems, fi ...

Manufacturer Patton electronic Category Power Supply

Documents that we receive from a manufacturer of a Patton electronic 2450 can be divided into several groups. They are, among others:
- Patton electronic technical drawings
- 2450 manuals
- Patton electronic product data sheets
- information booklets
- or energy labels Patton electronic 2450
All of them are important, but the most important information from the point of view of use of the device are in the user manual Patton electronic 2450.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Patton electronic 2450, service manual, brief instructions and user manuals Patton electronic 2450. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Patton electronic 2450.

A complete manual for the device Patton electronic 2450, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Patton electronic 2450 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Patton electronic 2450.

A complete Patton electronic manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Patton electronic 2450 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Patton electronic 2450, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Patton electronic 2450, that we can find in the current document
3. Tips how to use the basic functions of the device Patton electronic 2450 - which should help us in our first steps of using Patton electronic 2450
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Patton electronic 2450
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Patton electronic 2450 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Patton electronic 2450?

Use the form below

If you did not solve your problem by using a manual Patton electronic 2450, ask a question using the form below. If a user had a similar problem with Patton electronic 2450 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)