English dropdown-ico

Manual Planet Technology ET-118

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • Planet Technology ET-118 - page 1

    ET- 118 Ethernet Fiber Optic Transceiver Use r ’ s Manual ...

  • Planet Technology ET-118 - page 2

    FCC Information The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i ...

  • Planet Technology ET-118 - page 3

    exceeded. To prevent the situation happening, people who work with the antenna should be aware of the following rules: 1. Install the antenna in a location where a distance of 6.5 cm from the antenna may be maintained. 2. While installing the antenna in the location, please do not turn on the power of wireless card. 3. While the device is working, ...

  • Planet Technology ET-118 - page 4

    CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. About This Manual Ethernet Fiber Optic Transceiver Installation Guide is published by Planet Technology Corp. in 199 9 . This Revision is issued in Oct. 199 9 . Revision E ...

  • Planet Technology ET-118 - page 5

    Contents General Descriptions ............................ 1 Introduction ....................................... 1 Features ............................................. 1 AUI (D-15) connector descriptions... 2 ST Connector .................................... 3 LED Indicators .................................. 4 Duplex Fiber Cable ............... ...

  • Planet Technology ET-118 - page 6

    1 Chapter 1 General Descriptions 1.1 Introduction The fiber Optic Medium Attachment Unit provides the complete Attachment Unit Interface (AUI) to fiber optic interface. It connects to any standard IEEE802.3 Data Terminal Equipment AUI connector, and requires no configuration. It is connected through a standard AUI cable or direct connection to an E ...

  • Planet Technology ET-118 - page 7

    2 − Allow SQE (heartbeat) to be disabled when used with a concentrator / hub / repeater − When SQE test switch is enabled, send a heartbeat signal to the attached station at the end of a transmission 1.3 AUI (D-15) connector descriptions Pin Name Pairs Use 3 DO+ Transmit Data Out + 10 DO- Pair Data Out - 11 DO S Data Out Shield 5 DI+ Receive Da ...

  • Planet Technology ET-118 - page 8

    3 1.4 ST Connector ...

  • Planet Technology ET-118 - page 9

    4 1.5 LED Indicators LED MARK ST ATE DESCRIPTONS Power PWR On The transceiver has been connected Off Not connection Link Link On Link Beat Enable: A good link has been established with a functioning device Off Link Test signal is not received Transmit Tx Blink Data packet is transmitted. Off No data packet is transmitted. On Large data is being tra ...

  • Planet Technology ET-118 - page 10

    5 1.7 Absolute Maximum Ratings Ambient operating temperature 0 ° C to +50 ° C Storage temperature -20 ° C to +85 ° C Operating relative humidity 8% to 80% RH Storage relative humidity 5% to 98% RH Power Input voltage: 10.2VDC to 15.75VDc Maximum input current: 250mA ...

  • Planet Technology ET-118 - page 11

    6 Chapter 2 Setting and Installation 2.1 Setting the SQE Switch When this transceiver is connected directly to a repeater, the SQE function must be disabled. Note that a 10Base-T concentrator is a repeater unit. SQE T est: § Default: enable § Enable: attaching the transceiver to a LAN card in a computer, or to device expecting the SQE test signal ...

  • Planet Technology ET-118 - page 12

    7 Figure 2-1 Connecting to Ethernet Board through AUI Port § Connecting to Ethernet Repeater through AUI port Figure 2-2 Connecting to Ethernet Repeater Through AUI Port Part No.: EM-ET118 ...

Manufacturer Planet Technology Category Network Card

Documents that we receive from a manufacturer of a Planet Technology ET-118 can be divided into several groups. They are, among others:
- Planet Technology technical drawings
- ET-118 manuals
- Planet Technology product data sheets
- information booklets
- or energy labels Planet Technology ET-118
All of them are important, but the most important information from the point of view of use of the device are in the user manual Planet Technology ET-118.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Planet Technology ET-118, service manual, brief instructions and user manuals Planet Technology ET-118. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Planet Technology ET-118.

Similar manuals

A complete manual for the device Planet Technology ET-118, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Planet Technology ET-118 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Planet Technology ET-118.

A complete Planet Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Planet Technology ET-118 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Planet Technology ET-118, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Planet Technology ET-118, that we can find in the current document
3. Tips how to use the basic functions of the device Planet Technology ET-118 - which should help us in our first steps of using Planet Technology ET-118
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Planet Technology ET-118
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Planet Technology ET-118 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Planet Technology ET-118?

Use the form below

If you did not solve your problem by using a manual Planet Technology ET-118, ask a question using the form below. If a user had a similar problem with Planet Technology ET-118 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)