-
LevelOne WBR-3407 11g - page 1
LevelOne WBR-3407 11g Wireless ADSL Modem Router User’s Manual ...
-
LevelOne WBR-3407 11g - page 2
Table of Contents CHAPTER 1 INTRODUCTION ............................................................................................. 1 WBR-3407 Features .......................................................................................................... 1 Package Contents ..................................................................... ...
-
LevelOne WBR-3407 11g - page 3
Diagnostics .................................................................................................................... ... 83 Remote Admin ................................................................................................................. 84 Routing ............................................................................ ...
-
LevelOne WBR-3407 11g - page 4
1 Chapter 1 Introduction This Chapter provides an overview of the WBR-3407's features and capabilities. Congratulations on the purchas e of your new WBR-3407. The WBR-3407 is a multi-function device providing the followi ng services: • ADSL Modem . • Shared Broadband Internet Access for all LAN users. • WBR3407 for 802.11b and 802.11g Wi ...
-
LevelOne WBR-3407 11g - page 5
WBR-3407 User Guide • Auto-detection of Internet Connection Method. In most sit uations, the WBR-3407 can test your ADSL and Internet connection to determ ine the connection m ethod used by your ISP. • Fixed or Dynamic IP Address. On the Internet (WAN po r t) co nnection, the WBR- 3407 supports both Dynam ic IP Address (IP A ddress is allocated ...
-
LevelOne WBR-3407 11g - page 6
Introduction • DHCP Server Support. D ynamic H ost C onfiguration P rot ocol provides a dynami c IP address to PCs and other devices upon request. The WBR-3407 can act as a DHCP Server for devices on your local LAN and WLAN. Configuration & Management • Easy Setup. Use your WEB browser from anywhere on t he LAN or WLAN for configuration. ? ...
-
LevelOne WBR-3407 11g - page 7
WBR-3407 User Guide Physical Details Front-mounted LEDs Figure 2: Front Panel Power LED (Green) On - Power on. Off - No power. Status LED (Yellow) Off - Normal operation. Blinking - This LED blinks during start up, and duri ng a Firmware Upgrade. LAN For each port, there are 2 LEDs, to indicate the connection speed (10BaseT or 100BaseT) of each por ...
-
LevelOne WBR-3407 11g - page 8
Introduction Rear Panel Figure 3: Rear Panel Power port Connect the supplied power adapte r here. 10/100BaseT LAN connections Use standard LAN cables (RJ45 connectors) to connect y our PCs to these ports. Note: Any LAN port on the WBR-3407 will automatically function as an "Uplink" port when required. Just connect any port to a norma l po ...
-
LevelOne WBR-3407 11g - page 9
2 Chapter 2 Installation This Chapter covers the physical i nstallation of the WBR-3407. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cabl es with RJ45 connectors. • TCP/IP protocol m ust be installed on all PCs. • For Internet Access, an Internet Access account wi th an ISP, and a DSL connection. • To use the WBR34 ...
-
LevelOne WBR-3407 11g - page 10
Installation 2. Connect LAN Cables Use standard LAN cables to connect PCs to t he Switching Hub ports on the WBR-3407. Both 10BaseT and 100BaseT connections can be used sim ultaneously . If required, connect any port to a norm al por t on another Hub, using a st andard LAN cable. Any LAN port on the WBR-3407 will automa tically function as an " ...
-
LevelOne WBR-3407 11g - page 11
Chapter 3 Setup This Chapter provides Setup detai ls of the WBR-3407. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to protect the confi guration data. PCs on your local LAN m ay also require configurati on. For details, see Chapter 4 - PC Configuration ...
-
LevelOne WBR-3407 11g - page 12
Setup Configuration Program The WBR-3407 contains an HTTP server. This enables you t o connect to it, and configure it, using your Web Browser. Your Browser must support JavaScript . The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or lat er Preparation Befor ...
-
LevelOne WBR-3407 11g - page 13
WBR-3407 User Guide If you can't connect If the WBR-3407 does not respond, check the following: • The WBR-3407 is properly instal led, LAN connection is OK, and i t is powered ON. You can test the connection by using the "Ping" comm and: • Open the MS-DOS window or com mand prom pt window. • Enter the command: ping 192.168.0.1 ...
-
LevelOne WBR-3407 11g - page 14
Setup Common Connection Types Type Details ISP Data required Dynamic IP Address Your IP Address is allocated automatically, when you connect to you ISP. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automa tically. b) Some ISP's m ay require y ou to use a particular Hostname or Domain name, or MAC (physi cal) add ...
-
LevelOne WBR-3407 11g - page 15
WBR-3407 User Guide Home Screen After finishing the Setup W izard, you will see the Home screen. When you connect in future, you will see this screen when you connect . An example screen is shown below. Figure 5: Home Screen Main Menu The main m enu, on the left, contains l inks to the most-com monl y used screen. To see the links to the other avai ...
-
LevelOne WBR-3407 11g - page 16
Setup Mode Screen Use the Mode link on the main m enu to reach the Mode screen. An exam ple screen is shown below. Figure 6: LAN Screen Data - Mode Screen Device Mode Device Name This field display s the current name of this device. Device Mode Select the desired device m ode for the router: • Router - Both the ADSL Modem and the Router features ...
-
LevelOne WBR-3407 11g - page 17
WBR-3407 User Guide LAN Screen Use the LAN link on the main m enu to reach the LAN screen. An exam ple screen is shown below. Figure 7: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the WBR-3407, as seen from the local LAN. Use t he default value unless the address is already in use or your LAN is using a different IP address range. ...
-
LevelOne WBR-3407 11g - page 18
Setup DHCP What DHCP Does A DHCP (Dynami c Host Configuration Prot ocol) Server allocates a valid IP address to a DHCP Client (PC or device) upon request. • The client request is m ade when the client device starts up (boots). • The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address. • The WB ...
-
LevelOne WBR-3407 11g - page 19
WBR-3407 User Guide Wireless Screen The WBR-3407's settings must match the other Wireless stations. Note that the WBR-3407 will automatically accept both 802.11b and 802.11g connections, and no configuration is required for t his feature. To change the WBR-3407's default setti ngs for the WBR3407 feature, use the Wireless link on the main ...
-
LevelOne WBR-3407 11g - page 20
Setup Options Mode Select the desired mode: • g & b - Both 802.11.g and 802.11b Wireless stations will be able to use the WBR-3407. • g only - Only 802.11g Wireless stati ons can use the WBR-3407. • b only - Only 802.11b connections are availabl e. 802.11g Wireless Stations will only be able to use the WBR-3407 if they are fully backward- ...
-
LevelOne WBR-3407 11g - page 21
WBR-3407 User Guide Wireless Security The Wireless Security sub-screen is accesse d by the "Configure" button on the Wireless screen. It provides 4 options for Wireless Securit y: • Disabled - No security is used. • WEP - Data is encrypted using t he WEP standard. • WPA-PSK - Data is encrypted using t he WPA standard. Each Wireless ...
-
LevelOne WBR-3407 11g - page 22
Setup You must enter a Key Value for the Default Key . Key Value Enter the key value or values you wish t o use. The Default Key is required, the other keys are optional . Other stations m ust have the same key. Passphrase If desired, you can generate a key from a phrase, instead of entering the key value directly. Ent er the desired phrase, and cl ...
-
LevelOne WBR-3407 11g - page 23
WBR-3407 User Guide Wireless Security - WPA-802.1x If WPA-802.1x is selected, the scr een will look like the following. Note that to use 802.1x: • You need a Radius Server. • The Radius Server must have "Client" logi n for the WBR-3407, using its IP address and the the "Shared Key" set on th is screen . • Each client (user ...
-
LevelOne WBR-3407 11g - page 24
Setup Password Screen The password screen allows you to assign a password to the WBR-3407. Figure 12: Password Screen Old Password Enter the existing password in this field. New password Enter the new password here. Verify password Re-enter the new password here. You will be prompted for the password when you connect, as shown below. Figure 13: Pas ...
-
LevelOne WBR-3407 11g - page 25
4 Chapter 4 PC Configuration This Chapter detail s the PC Configurat ion required on the local ( "Internal") LAN. Overview For each PC, the following may need to be configured: • TCP/IP network settings • Internet Access configuration • Wireless configuration Windows Clients This section describes how to configure Wi ndows clients f ...
-
LevelOne WBR-3407 11g - page 26
PC Configuration Checking TCP/IP Settings - Windows 9x/ME: 1. Select Control Panel - Net work . You should see a screen like t he following: Figure 14: Network Configuration 2. Select the TCP/IP protocol for your net work card. 3. Click on the Properti es button. You should then see a screen li ke the following. Figure 15: IP Address (Win 95) Ensur ...
-
LevelOne WBR-3407 11g - page 27
WBR-3407 User Guide • On the Gateway tab, enter the WBR-3407's IP address i n the New Gateway field and click Add , as shown below. Your LAN administ rator can advise you of the IP Address they assigned to the WBR-3407. Figure 16: Gateway Tab (Win 95/98) • On the DNS Configurati on tab, ensure Enable DNS is selected. If the DNS Server Sear ...
-
LevelOne WBR-3407 11g - page 28
PC Configuration Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Net work , and, on the Protocols tab, select the TCP/IP prot ocol, as shown below. Figure 18: Windows NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below. 25 ...
-
LevelOne WBR-3407 11g - page 29
WBR-3407 User Guide Figure 19: Windows NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address fr om a DHCP Server or Specify an IP Address , as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting. Using this is recommended . By default, the W ...
-
LevelOne WBR-3407 11g - page 30
PC Configuration Figure 20 - Windows NT4.0 - Add Gateway 2. The DNS should be set to the address provided by y our ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add butt on (under DNS Service Search Order ), and enter the DNS provided by y our ISP. 27 ...
-
LevelOne WBR-3407 11g - page 31
WBR-3407 User Guide Figure 21: Windows NT4.0 - DNS 28 ...
-
LevelOne WBR-3407 11g - page 32
PC Configuration Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Net work and Dial-up Connect ion . 2. Right - click t he Local Area Connection icon and select Properties . You shoul d see a screen like the following : Figure 22: Network Configuration (Win 2000) 3. Select the TCP/IP protocol for your net work card. 4. Click on th ...
-
LevelOne WBR-3407 11g - page 33
WBR-3407 User Guide Figure 23: TCP/IP Properties (Win 2000) 5. Ensure your TCP/IP settings are correct , as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatical ly . This is the default Windows setting. Using this is recommended . By default, the WBR-3407 will act as a DHCP Server. Restart your PC t o en ...
-
LevelOne WBR-3407 11g - page 34
PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Net work Connection . 2. Right click t he Local Area Connection and choose Properties . You should see a screen like the following: Figure 24: Network Configuration (Windows XP) 3. Select the TCP/IP protocol for your net work card. 4. Click on the Properti es button. Y ...
-
LevelOne WBR-3407 11g - page 35
WBR-3407 User Guide Figure 25: TCP/IP Properties (Windows XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatical ly . This is the default Windows setting. Using this is recommended . By default, the WBR-3407 will act as a DHCP Server. Restart your PC t o ensure it obtains an ...
-
LevelOne WBR-3407 11g - page 36
PC Configuration Internet Access To configure your PCs to use the WBR-3407 for Internet access: • Ensure that the DSL modem , Cable m odem, or other perm anent connection is functional. • Use the following procedure to configure y our Browser to access the Internet via the LAN, rather than by a Dial-up connection. For Windows 9x/ME/2000 1. Sele ...
-
LevelOne WBR-3407 11g - page 37
WBR-3407 User Guide Macintosh Clients From your Macintosh, you can access the Inte rnet via the WBR-3407. The procedure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up m enu. 3. Select Using DHCP Server from the Confi gure pop-up menu. The DHCP C lient ID fiel d can be left blank. 4. Close the TCP/IP ...
-
LevelOne WBR-3407 11g - page 38
PC Configuration Wireless Station Configuration This section applies to all Wireless stations wishing to use the WBR-3407's Access Point, regardless of the operating system which is used on t he client. To use the WBR3407 in the WBR-3407, each Wirele ss Station must have compatible settings, as follows: Mode The m ode must be set to Infrastruc ...
-
LevelOne WBR-3407 11g - page 39
WBR-3407 User Guide Using WPA-802.1x - Overview 802.1x mode provides greater securit y and centralized m anageme nt, but it is m ore comple x to configure. Wireless Station Configuration For each of the following items, each Wireless St ation m ust have the same settings as the WBR3407. 802.1x Authentication Each client must obtain a Certificate wh ...
-
LevelOne WBR-3407 11g - page 40
PC Configuration 802.1x Server Setup (Windows 2000 Server) This section describes using Microsoft Internet Auth en tication Server as the Radius Server, since it is the m ost comm on Radius Server availabl e that supports the EAP-TLS authenticati on method. The following services on the Windows 2000 Dom ain Controlle r (PDC) are also required: • ...
-
LevelOne WBR-3407 11g - page 41
WBR-3407 User Guide Figure 26: Components Screen 4. Click Next . 5. Select the Enterprise root CA , and click Next . Figure 27: Certification Screen 6. Enter the information for the Certificate Autho r ity, an d click Next . 38 ...
-
LevelOne WBR-3407 11g - page 42
PC Configuration Figure 28: CA Screen 7. Click Next if you don't want t o change the CA's configurati on data. 8. Installation will warn you that Internet Information Services are running, and m ust be stopped before continuing. Cl ick Ok , then Finish . DHCP server configuration 1. Click on the Start - Programs - Adm inistrative Tools - ...
-
LevelOne WBR-3407 11g - page 43
WBR-3407 User Guide Figure 30:IP Address Screen 6. Add exclusions in the address fields if requi red. If no exclusions are required, leave it blank. Click Next . 7. Change the Lease Duration time if preferred. Click Next . 8. Select Yes, I want to configure these opti ons now , and click Next . 9. Enter the router address for the current subnet. Th ...
-
LevelOne WBR-3407 11g - page 44
PC Configuration Certificate Authority Setup 1. Select Start - Programs - Admi nistrativ e Tools - Certification Authority. 2. Right-cli ck Policy Settings , and select New - Certificate to Issue . Figure 32: Certificate Authority Screen 3. Select Authenticated Session and Smart card Logon (select m ore than one by holding down the Ctrl key). Click ...
-
LevelOne WBR-3407 11g - page 45
WBR-3407 User Guide Figure 34: Active Directory Screen 6. Select the Group Policy t ab, choose Default Domain Policy then click Edit . Figure 35: Group Policy Tab 7. Select Computer Configurat ion - Windows Settings - Security Settings - Public Key Policies , right-click Automatic Certificate Request Settings - New - Automatic Certificate Request . ...
-
LevelOne WBR-3407 11g - page 46
PC Configuration Figure 36: Group Policy Screen 8. When the Certificate Request Wizard appears, click Next . 9. Select Computer , then click Next . Figure 37: Certificate Template Screen 10. Ensure that your certificate au thority is checked, then click Next . 11. Review the polic y change informati on and click Finish . 12. Click Start - Run , typ ...
-
LevelOne WBR-3407 11g - page 47
WBR-3407 User Guide Internet Authentication Service (Radius) Setup 1. Select Start - Programs - Adm inistrative T ools - Internet Authentication Service 2. Right-cli ck on Clients , and select New Client . Figure 38: Service Screen 3. Enter a name for the access point, click Next . 4. Enter the address of the WBR3407, and set the shared secret, as ...
-
LevelOne WBR-3407 11g - page 48
PC Configuration 11. Click Edit Profile... and select the Authentica tion tab. Enable Extensible Authentica tion Protocol , and select Smart Card or other Certificate . Deselect other authentication meth- ods listed. Click OK . Figure 40: Authentication Screen 12. Select No if you don't want to vi ew the help for EAP. Click Finish . 45 ...
-
LevelOne WBR-3407 11g - page 49
WBR-3407 User Guide Remote Access Login for Users 1. Select Start - Programs - Adm inistrative Tools- Active Directory Users and Computers. 2. Double click on the user who you want to enable. 3. Select the Dial-in tab, and enable Allow access . Click OK . Figure 41: Dial-in Screen 46 ...
-
LevelOne WBR-3407 11g - page 50
PC Configuration 802.1x Client Setup on Windows XP Windows XP ships with a compl ete 802.1x client implem entati on. If using Windows 2000, you can install SP3 (Service Pack 3 ) to gain the same functionality. If you don't have either of t hese systems, y ou must use the 802.1x cli ent software provided with your wireless adapt er. Refer to yo ...
-
LevelOne WBR-3407 11g - page 51
WBR-3407 User Guide Figure 43: Wireless CA Screen 5. Select User certificate request and select User Certificate , the click Next . Figure 44: Request Type Screen 6. Click Submit . 48 ...
-
LevelOne WBR-3407 11g - page 52
PC Configuration Figure 45: Identifying Information Screen 7. A message will be displayed, then the certificate will be return ed to you. Click Install this certificate . Figure 46:Certificate Issued Screen 8. . You will receive a confirmation m essage. Click Yes . 49 ...
-
LevelOne WBR-3407 11g - page 53
WBR-3407 User Guide Figure 47: Root Certificate Screen 9. Certificate setup is now complete. 802.1x Authentication Setup 1. Open the properties for the wirele ss connection, by selecting Start - Control Panel - Network Connections. 2. Right Cli ck on the Wireless Network Connection , and select Properties . 3. Select the Authentication Tab, and ens ...
-
LevelOne WBR-3407 11g - page 54
PC Configuration • Your network administrator can advise you of the correct settings for each network. 802.1x networks typically use EAP-TLS. This is a dynam ic key system , so there is no need to enter key values. Enabling Encryption To enable encryption fo r a wireless network, follow this procedur e: 1. Click on the Wireless Networks tab. Figu ...
-
LevelOne WBR-3407 11g - page 55
WBR-3407 User Guide Figure 50: Properties Screen Setup for Windows XP and 802.1x client is now complet e. 52 ...
-
LevelOne WBR-3407 11g - page 56
5 Chapter 5 Operation and Status This Chapter details t he operation of the WBR-3407 and the stat us screens. Operation Once both the WBR-3407 and the PCs are configured, operation is automatic. However, there are some situations where add iti onal Internet configurat ion may be required. Refer to Chapter 6 - Advanced Features for further details. ...
-
LevelOne WBR-3407 11g - page 57
WBR-3407 User Guide Data - Status Screen Internet Modem Status This indicates the status of the ADSL modem component. DownStream Connection Speed If connected, displays the speed for the DownStream (downl oad) ADSL Connection. UpStream Connection Speed If connected, displays the speed for the UpStream (upl oad) ADSL Connection. Connection Method Th ...
-
LevelOne WBR-3407 11g - page 58
Operation and Status System Device Name The current name of the WBR-3407. This i s also the "hostname" provided to ISPs who request this i nformation. Firmware Version The version of the current firmware installed. Buttons Connection Details Click this button to open a sub-window and view a det ailed description of the current connecti on ...
-
LevelOne WBR-3407 11g - page 59
WBR-3407 User Guide Buttons Connect If not connected, establish a connect ion to your ISP. Disconnect If connected to your ISP, hang up the connection. Close Close this window. Connection Details - Dynamic IP Address If your access method is "Direct" (no login), with a Dynam ic IP address, a screen like the following example will be displ ...
-
LevelOne WBR-3407 11g - page 60
Operation and Status Server. Close Close this window. Connection Details - Fixed IP Address If your access method is "Direct" (no login), w ith a fixed IP address, a screen like the following example will be displayed when th e "Connection Details" button is clicked. Figure 54: Connection Details - Fixed/Dynamic IP Address Data ...
-
LevelOne WBR-3407 11g - page 61
6 Chapter 6 Advanced Features This Chapter explains when and how to use the WBR-3407's "Advanced" Features. Overview The following advanced features are provided: • Internet: • DMZ • URL filter • Dynamic DNS • Firewall Rules • Firewall Services • Schedule • Virtual Servers Internet This screen provides access to the D ...
-
LevelOne WBR-3407 11g - page 62
Advanced Features URL Filter If you want to limit access to certain sites on the Internet, you can use this feature. The URL filter will check each Web site access. If the address, or part of the address, is included in the block site list, access will be denied. On the Advanced Internet screen, select the desired setting: • Disable - disable thi ...
-
LevelOne WBR-3407 11g - page 63
WBR-3407 User Guide Trusted PC Allow Trusted PC Enable this to allow one computer to have unrestricted access to the Internet. For this PC, the URL filter will be ignored. If enabled, you must select the PC to be th e tru sted PC. Trusted PC Select the PC to be the Trusted PC. Dynamic DNS (Domain Name Server) This free service is very usef ul when ...
-
LevelOne WBR-3407 11g - page 64
Advanced Features Dynamic DNS Screen Select Advanced on the main m enu, then Dynamic DNS , to see a screen like the following: Figure 57: DDNS Screen Data - Dynamic DNS Screen DDNS Service Use a Dynamic DNS Service Use this to enable or disable the DDNS feature as required. DDNS Data Service Provider Select the desired DDNS Service provider. Host N ...
-
LevelOne WBR-3407 11g - page 65
WBR-3407 User Guide Firewall Rules The Firewall Rules screen allows you to define "Firewall Rules" which can allow or preven t certain traffic. By default: • All Outgoing traffic is permitted. • All Incoming traffic is denied. "Traffic" means incomi ng connec tion attempts, not packets. Because of this default behavior, any ...
-
LevelOne WBR-3407 11g - page 66
Advanced Features WAN Users The WAN IP address or addresses covered by this rule. Log Indicates whether or not connections covered by this rule shoul d be logged. Buttons Use the Add button to create a new rule. The other buttons - Edit , Move , or Delete - require that a rule be selected first. Use the radio button s in the left column to select t ...
-
LevelOne WBR-3407 11g - page 67
WBR-3407 User Guide Incoming Rules This screen is display ed when the "Add" or "Edit" butt on for Incoming Rule s is clicked. Figure 59: Inbound Services Screen Data – Incoming Rules Screen Inbound Services Service Select the desired Service. This dete rm ines which packets are covered by this rule. If necessary, you can defi ...
-
LevelOne WBR-3407 11g - page 68
Advanced Features Log Thi s determines whet her packets covered by this rule are logged. Sel ect the desired action. • Always - always log traffic considered by this rule, whether it matches or not . (This is useful when debugging y our rules.) • Never - never log traffic considered by this ru le, whether it matches or not. • Match - Log traf ...
-
LevelOne WBR-3407 11g - page 69
WBR-3407 User Guide • To define the Schedule used in th ese selections, use the "Schedule" screen. LAN Users Select the desired option to determ ine which PCs are covered by this rule: • Any - All PCs are covered by this rule. • Single PC - Only the selected PC is covered by this ru le. If selected, you must select the PC. PC - If u ...
-
LevelOne WBR-3407 11g - page 70
Advanced Features Firewall Services This screen is used to modify the list of Services which are available when creating Firewall Rules. Figure 61: Add Services Screen Data – Add Services Services Services List This lists all defined Services. Add Use this to open a sub-screen where you can add a new service. Edit To modify a service, select it, ...
-
LevelOne WBR-3407 11g - page 71
WBR-3407 User Guide Add/Edit Service This screen is displayed when the Add or Edit button on the Services screen is clicked. Figure 62 : Add/Edit Service Data – Add/Edit Service Services Name If editing, this shows the current nam e of the Service. If adding a new service, this will be blank, and y ou should enter a suitable nam e. Type Select t ...
-
LevelOne WBR-3407 11g - page 72
Advanced Features Options This screen allows advanced users to enter or change a number of set tings. For normal operation, there is no need to use this screen or change any settings. An example Options screen is shown below. Figure 63: Options Screen Data - Options Screen Internet Respond to Ping • If checked, the WBR-3407 will repond to Ping (I ...
-
LevelOne WBR-3407 11g - page 73
WBR-3407 User Guide Schedule This Schedule can be used fo r the Firewall Rules and the URL filter. Figure 64: Schedule Screen Data - Schedule Screen Schedule Sunday, Monday… Use these checkboxes to select the desired days. Start Time Enter the start using a 24 hr clock. Finish Time Enter the finish tim e using a 24 hr clock. Local Time Time Zone ...
-
LevelOne WBR-3407 11g - page 74
Advanced Features Virtual Servers This feature, sometimes called Port Forwarding , allows y ou to make Servers on your LAN accessible to Internet users. Normally, Internet users would not be able to access a server on your LAN because: • Your Server does not have a valid external IP Address. • Attempts to connect to devices on your LAN are bloc ...
-
LevelOne WBR-3407 11g - page 75
WBR-3407 User Guide Figure 66: Virtual Servers Screen Data - Virtual Servers Screen Servers Servers This lists a num ber of comm on Server types. If the desired Server type is not listed, you can create a Firewall Rule to achieve the same effect as the Virtual Server function. Properties Enable Use this to Enable or Disable support for thi s Server ...
-
LevelOne WBR-3407 11g - page 76
7 Chapter 7 Advanced Administration This Chapter explains the settings avail able via the "Administration" section of the menu. Overview Normally, it is not necessary to use these scr eens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced us ...
-
LevelOne WBR-3407 11g - page 77
WBR-3407 User Guide PC Database The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). • It eliminates the need to enter IP addresses. • Also, you do not need to use fixed IP addresses on your LAN. However, if you do use a fixed IP address on some devices on your LAN, you should ent er details of each such d ...
-
LevelOne WBR-3407 11g - page 78
Advanced Administration Data - PC Database Screen Known PCs This lists all current entries. Data displayed is name (IP Address) type . The "type" indicates whether the PC is connected to the LAN. Name If adding a new PC to th e list, en ter its name here. It is best if this matches the PC's "hostname". IP Address Enter the ...
-
LevelOne WBR-3407 11g - page 79
WBR-3407 User Guide PC Database (Admin) This screen is display ed if the "Advanced Admi nistration" button on t he PC Database is clicked. It provides m ore control than the standard PC Database screen. Figure 68: PC Database (Admin) Data - PC Database ( Admin) Screen Known PCs This lists all current entries. Data displayed is name (IP Ad ...
-
LevelOne WBR-3407 11g - page 80
Advanced Administration MAC Address Select the appropriate opt ion • Automatic discovery - Select this to have the WBR-3407 contact the PC and find its MAC address. This is only possibl e if the PC is connected to the LAN and powered On. • MAC address is - Enter the MAC address on the PC. The MAC address is also called the "Hardware Addres ...
-
LevelOne WBR-3407 11g - page 81
WBR-3407 User Guide Config File This feature allows you to downl oad the current settings from the WBR-3407, and save them to a file on your PC. You can restore a previously-downloaded confi guration file t o the WBR-3407, by uploading it to the WBR-3407. This screen also allows you to set the WBR-3407 back to its factory default configuration. Any ...
-
LevelOne WBR-3407 11g - page 82
Advanced Administration Logging The Logs record various types of activit y on the WBR-3407. This data i s useful for troubleshooting, but enabling all l ogs will generate a large amount of data and adversely affect performance. Since only a lim ited am ount of log data can be stored i n the WBR-3407, log data can also be E-mailed to your PC. Use th ...
-
LevelOne WBR-3407 11g - page 83
WBR-3407 User Guide Logs Include (Checkboxes) Use these checkboxes to determine which events are included i n the log. Checkin g all options will increase the size of th e lo g, so it is good practice to disable any events which are not really required. • Attempted access to blocked sites - If checked, attempted Internet accesses which were block ...
-
LevelOne WBR-3407 11g - page 84
Advanced Administration E-mail This screen allows you to E-mail Logs and Alerts. A sample screen is show n below. Figure 71: E-mail Screen Data – E-mail Screen E-Mail Notification Turn E-mail Notification on Check this box to enable this feature. If enabled, the E-ma il address informati on (below) must be provi ded. Send to this E- mail address ...
-
LevelOne WBR-3407 11g - page 85
WBR-3407 User Guide E-mail Alerts Send E-mail alerts immediately You can choose to have alerts E-ma iled to you, by checki ng the desired checkboxes. The WBR-3407 can send an imm ediate alert when it detects a significant s ecurity incident such as • A known hacker attack is directed at y our IP address • A computer on the Inte rnet scans your ...
-
LevelOne WBR-3407 11g - page 86
Advanced Administration Diagnostics This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful in solving network problem s. An example Network Diagnost ics screen is shown below. Figure 72: Network Diagnostics Screen Data - Network Diagnostics Screen Ping Ping this IP Address Enter the IP addre ...
-
LevelOne WBR-3407 11g - page 87
WBR-3407 User Guide Remote Admin If enabled, this feature allows y ou to manage the WBR-3407 via t he Internet. Figure 73: Remote Administration Screen Data - Remote Administration Screen Remote Administration Enable Remote Management Check to allow admi nistration/m anagement via the Internet. (To connect, see below). If Disabled, this device will ...
-
LevelOne WBR-3407 11g - page 88
Advanced Administration To connect from a remote PC via the Internet 1. Ensure your Internet connection i s established, and start your Web Browser. 2. In the "Address" bar, enter "HTTP://" follo wed by the Internet IP Address of the WBR- 3407. If the port number is not 80, the port num ber is also required. (After the IP Addres ...
-
LevelOne WBR-3407 11g - page 89
WBR-3407 User Guide Routing Overview • If you don't have other R outers or Gateways on your LAN, y ou can ignore the "Routing" page completely. • If the WBR-3407 is only acting as a Gat eway for the local LAN segm ent, ignore the "Routing" page even if your LAN has other R outers. • If your LAN has a standard Router ( ...
-
LevelOne WBR-3407 11g - page 90
Advanced Administration Figure 74: Routing Screen Data - Routing Screen RIP RIP Direction Select the desired RIP Direction. RIP Version Choose the RIP Version for the Server. Static Routing Static Routing Table Entries This list shows all entries in the Routing Table. • This area shows details of th e selected item in the list. • Change any the ...
-
LevelOne WBR-3407 11g - page 91
WBR-3407 User Guide Destination IP Address Normally 0.0.0.0, but check your router docum entation. Network Mask Normally 0.0.0.0, but check your router docum entation. Gateway IP Address The IP Address of the WBR-3407. Metric 1 Other Routers on the Local LAN Other routers on the local LAN m ust use the WBR-3407's Local Router as the Default Ro ...
-
LevelOne WBR-3407 11g - page 92
Advanced Administration Gateway IP Address 192.168.0.100 Metric 3 For Router A's Default Route Destination IP Address 0.0.0.0 Network Mask 0.0.0.0 Gateway IP Address 192.168.0.1 (WBR-3407's IP Address) For Router B's Default Route Destination IP Address 0.0.0.0 Network Mask 0.0.0.0 Gateway IP Address 192.168.1.80 (WBR-3407's loc ...
-
LevelOne WBR-3407 11g - page 93
WBR-3407 User Guide Upgrade Firmware The firmware (software) in t he WBR-3407 can be upgraded using your Web Browser. You must first downl oad the upgrade file, then select Upgrade Firmware on the Administration menu. You will see a screen like the follo win g. Figure 76: Router Upgrade Screen To perform the Firmware Upgrade: 4. Click the Browse bu ...
-
LevelOne WBR-3407 11g - page 94
A Appendix A T roubleshooting This Appendix covers the most likely probl ems and their solutions. Overview This chapter covers some comm on problems that may be encountered whi le using the WBR- 3407 and some possible sol utions to them . If you follow the suggested steps and t he WBR- 3407 still does not function properly, contact your dealer for ...
-
LevelOne WBR-3407 11g - page 95
WBR-3407 User Guide For incoming connecti ons, you must use the Vi rtual Server or Firewall Rules to specify the PC which w ill receive the incoming traffic. You can also use the DMZ function. This should work wit h almost every application, but: • It is a security risk, since the firewall is disabled. • Only one (1) PC can use this feature. Wi ...
-
LevelOne WBR-3407 11g - page 96
B Appendix B About Wireless LANs This Appendix provides some background informati on about using Wireless LANs (WLANs). Modes Wireless LANs can work in either of two (2 ) modes: • Ad-hoc • Infrastructure Ad-hoc Mode Ad-hoc mode does not require an Access Po int or a wired (Ethernet) LAN. Wireless Stations (e.g. notebook PCs w ith wireless cards ...
-
LevelOne WBR-3407 11g - page 97
WBR-3407 User Guide Channels The Wireless Channel sets the radio frequency used for com muni cation. • Access Points use a fixed Channel. You can se lect the Channel used. This allows you to choose a Channel which provides the least i nterference and best performance. In t he USA and Canada, 11 channel are available. If using multiple Access Poin ...
-
LevelOne WBR-3407 11g - page 98
C Appendix C Specifications Multi-Function WBR-3407 Model WBR-3407 ADSL Interface T1.413, G.DMT, G.lite, multi-mode Dimensions 189mm (W) * 122mm (D) * 33m m(H) Operating Temperature 0 ° C to 40 ° C Storage Temperature -10 ° C to 70 ° C Network Protocol: TCP/IP Network Interface: 4 * 10/100BaseT (RJ45) LAN connection 1 * RJ11 for ADSL line LEDs ...
-
LevelOne WBR-3407 11g - page 99
WBR-3407 User Guide Regulatory Approvals FCC Statement This equipment has been tested and found to com ply with the lim its for a C lass B digital device, pursuant to Part 15 of the FCC R ules. These lim its are designed to provide reasonable protection again st h armful interference in a residential installation. This equipment generat es, uses an ...
Do you have a question concerning LevelOne WBR-3407 11g?
Use the form below
If you did not solve your problem by using a manual LevelOne WBR-3407 11g, ask a question using the form below. If a user had a similar problem with LevelOne WBR-3407 11g it is likely that he will want to share the way to solve it.