English dropdown-ico

Manual Hitachi CP-X615

44 pages 5.36 mb
Download

Go to site of 44

Summary
  • Hitachi CP-X615 - page 1

    1 Projector CP-X705/CP-X615 User's Manual (detailed) Network Guide Thank you for purchasing this projector . This projecto r has the net work function that brings you the follo wing main fea tures. ►Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference. WA ...

  • Hitachi CP-X615 - page 2

    2 Content Content  About this manual .......................................................................... 1 Content .......................................................................................... 2 1. Main functions ........................................................................... 3 1.1 Conguring and controlling via ...

  • Hitachi CP-X615 - page 3

    3 1. Main functions 1. Main functions 1.1 Conguring and controlling via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to congure the network settings, monitor the projector and so on. 1.2 e-SH ...

  • Hitachi CP-X615 - page 4

    4 2. Equipment connection and network setting 2.1 R equired equipment pr eparation 2. Equipment connection and network setting The following equi pments are requir ed to connect th e projector to your PC through the network. PC : 1) equipped with the network feature 2) installed a web browser software (  1 1 ) LAN cable : CA T -5 or greater ...

  • Hitachi CP-X615 - page 5

    5 2. Equipment connection and network setting 2.2 Manual network connection setting 2.2.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with an existing network, contact the network administrator . Next, please check the PC setting as explained below . 2.2.2 Network settings This is the explanation of netw ...

  • Hitachi CP-X615 - page 6

    6 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 7) Set IP address, subnet mask and default gateway for PC. Fig. 2.2.2.d “Internet Protocol (TCP/IP) Properties” window 5) Open “Local Area Connection Properties” window you use for network device. (Fig. 2.2.2.c) 6) Set used protocol as “TCP/IP? ...

  • Hitachi CP-X615 - page 7

    7 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector ’s one. And the entire IP address in the PC should not be overlapped with other equipments in the same netwo ...

  • Hitachi CP-X615 - page 8

    8 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.2.3.c) Fig. 2.2.3.b “Internet Properties” window 2.2.3 “Inter net Option” setting 1) Click “Internet Options” in “N ...

  • Hitachi CP-X615 - page 9

    9 2. Equipment connection and network setting 2.2 Manual network connection setting (continued) Fig. 2.2.4 “Logon Menu” 2.2.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not. 1) Start browser in PC and specify following URL, then click “Go” ...

  • Hitachi CP-X615 - page 10

    10 3. Management with Web browser softw are Conguring and Controlling the Pr ojector via a W eb Browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  1 1 ) E-mail Aler ts The projector can automatically send an alert to specied e-mail addres ...

  • Hitachi CP-X615 - page 11

    1 1 3. Management with Web browser softw are 3.1 Conguring and controlling the pr ojector via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.5 or later is required. • If JavaScript is disabled in your web browser conguration, you ...

  • Hitachi CP-X615 - page 12

    12 3. Management with Web browser softw are When conguring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs . 3.1 Conguring and controlling the projector via a web browser ...

  • Hitachi CP-X615 - page 13

    13 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.1 Logon Refer to the follo wing for conguring or controlling th e projector via a web browser . 1) Enter “h ttp://19 2.168.1. 10/” int o the ad dress bar of the web browser and press “Enter” key or click “Go” b ...

  • Hitachi CP-X615 - page 14

    14 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.2 Network Infor mation All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID. Refer to the table. (  13 ) 3. Management ...

  • Hitachi CP-X615 - page 15

    15 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.3 Network Settings Displays and congures network settings. Item Description IP Conguration Congures network settings. DHCP ON Enables DHCP . DHCP OFF Disables DHCP . IP Address Congures the IP address when DHCP is ...

  • Hitachi CP-X615 - page 16

    16 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. Y ou can restart the network connection by clicking ...

  • Hitachi CP-X615 - page 17

    17 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.4 Port Settings Displays and congures communication port settings. Item Description Network Control Port1 (Port:23) Congures command control port 1 (Port:23). Port open Click [Enable] check box to use port 23. Authentic ...

  • Hitachi CP-X615 - page 18

    18 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.5 Mail Settings 3. Management with Web browser softw are Displays and congures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function. Congure the conditions for sending e-mail under the Alert Settings. SMTP ...

  • Hitachi CP-X615 - page 19

    19 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.6 Aler t Settings Displays and congures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly xed. Fan Error The cooling fan is not operating. Lamp Error The lamp does not light, and there is a possibility that i ...

  • Hitachi CP-X615 - page 20

    20 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are The Alert Items are shown below . Setting Item Description Alarm Time Congures the time to alert. (Only Lamp T ime Alarm and Filter T ime Alarm.) SNMP T rap Click [Enable] check box to enable SNMP T rap alerts. Send Mail Click ...

  • Hitachi CP-X615 - page 21

    21 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.7 Schedule Settings Displays and congures schedule settings. Item Description Daily Congures the daily schedule. Sunday Congures the Sunday schedule. Monday Congures the Monday schedule. T uesday Congures the T uesday schedule. Wednesday Congures t ...

  • Hitachi CP-X615 - page 22

    22 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are The daily and weekly event items are shown below . Item Daily & Weekly Description Schedule Click [Enable] check box to enable the schedule. Schedule List Displays the current schedule. The specic date event items are show ...

  • Hitachi CP-X615 - page 23

    23 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.8 Date/Time Settings Displays and congures the date and time settings. Item Description Current Date Congures the current date in year/month/day format. Current Time Congures the current time in hour:minute:second fo ...

  • Hitachi CP-X615 - page 24

    24 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Time difference Congures the time difference. Set the same time dif ference as the one set on your PC. If unsure, consult your IT manager . SNTP Click the [ON] check box to retrieve Date and T ime information ...

  • Hitachi CP-X615 - page 25

    25 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.9 Security Settings Displays and congures passwords and other security settings. Item Description Administrator authority Congures the Administrator ID and password. Administrator ID Congures the Administrator ID. Th ...

  • Hitachi CP-X615 - page 26

    26 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Click [Apply ] button to save the settings. • The new conguration settings are activated after restarting the network connection. When the conguration settings are changed, you must restart the network connection. Y ou ca ...

  • Hitachi CP-X615 - page 27

    27 3. Management with Web browser softw are 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.10 Projector Contr ol Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input source. Picture Mode Selects the picture mode setting. Blank On/Off T urns Blank on/off. Mute ...

  • Hitachi CP-X615 - page 28

    28 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position. H Position Adjusts the horizontal position. H Phase Adjusts the horizontal phase. H Size ...

  • Hitachi CP-X615 - page 29

    29 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are Item Description Audio V olume Adjusts the volume setting. T reble Adjust the T reble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting. Speaker T urns the built-in speaker on/off. Audio-RGB1 Assigns the ...

  • Hitachi CP-X615 - page 30

    30 3.1 Conguring and controlling the projector via a web browser (continued) 3.1.11 Projector Status 3. Management with Web browser softw are Displays and congures the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp. Filter Time Displays the usage ...

  • Hitachi CP-X615 - page 31

    31 3.1 Conguring and controlling the projector via a web browser (continued) 3. Management with Web browser softw are 3.1.12 Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new conguration settings. • Restarting requires you to re-l ...

  • Hitachi CP-X615 - page 32

    32 3. Management with Web browser softw are 3.2 E-mail Aler ts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error . • Up to ve e-mail addresses can be specied. • The projector may be not able to send e-ma ...

  • Hitachi CP-X615 - page 33

    33 3.2 E-mail Alerts (continued) 3. Management with Web browser softw are 8) Click [Alert Settings] on the main menu to congure the E-mail Alerts settings. 9) Select and congure each alert item. Refer to the item 3.1.6 Alert Settings (  19 ) for further information. 10) Click [Apply] button to save the settings. Failure/W arning e-mails ar ...

  • Hitachi CP-X615 - page 34

    34 3. Management with Web browser softw are 3.3 Projector Mana gement using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function. • It is recommended ...

  • Hitachi CP-X615 - page 35

    35 3. Management with Web browser softw are 3.4 Ev ent Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector . • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display . • The power on / of f event ...

  • Hitachi CP-X615 - page 36

    36 3. Management with Web browser softw are • In Standby mode the power indicator will ash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function do ...

  • Hitachi CP-X615 - page 37

    37 3. Management with Web browser softw are • A Network Restart is required after the Daylight Savings Time or SNTP conguration settings have been changed. • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly . Replace the battery by following the instructions on replaci ...

  • Hitachi CP-X615 - page 38

    38 3. Management with Web browser softw are 3.5 e-SHO T (Still Image T r ansfer) Display The projector can display still images that are transferred via the network. • It is possible to allocate the image le up to 4 in the maximum. • The image le also can be displayed by using schedule function from the web browser . Refer to the item 3.4 ...

  • Hitachi CP-X615 - page 39

    39 3.5 e-SHOT (Still Image Transfer) Display (continued) Congure the following items from a web browser when e-SHOT is used. Example: If the IP address of the projector is set to 192.168.1.10: 1) Enter "http://192.168.1.10/" into the address bar of the web browser . 2) Enter the Administrator ID and password and click [Logon] . 3) Clic ...

  • Hitachi CP-X615 - page 40

    40 3. Management with Web browser softw are 3.6 Command Control via the Networ k Y ou can congure and control the projector via the network using RS-232C commands. Communication P or t The following two ports are assigned for the command control. Command Control Settings (  17 ) Congure the following items from a web browser when command c ...

  • Hitachi CP-X615 - page 41

    41 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) When the authentication setting is enabled, the following settings are required. (  25 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See NOTE. 9) Click [Apply] button to save t ...

  • Hitachi CP-X615 - page 42

    42 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Command F or mat Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However , the following reply will be sent back in ...

  • Hitachi CP-X615 - page 43

    43 R eply Data for mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error reply> Reply Error code Connection ID 0x1C 2 bytes 1 byte <Data reply> ...

  • Hitachi CP-X615 - page 44

    44 3. Management with Web browser softw are 3.6 Command Control via the Network (continued) Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentication success when authentication is enabled. Th ...

Manufacturer Hitachi Category Projector

Documents that we receive from a manufacturer of a Hitachi CP-X615 can be divided into several groups. They are, among others:
- Hitachi technical drawings
- CP-X615 manuals
- Hitachi product data sheets
- information booklets
- or energy labels Hitachi CP-X615
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hitachi CP-X615.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hitachi CP-X615, service manual, brief instructions and user manuals Hitachi CP-X615. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hitachi CP-X615.

Similar manuals

A complete manual for the device Hitachi CP-X615, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hitachi CP-X615 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hitachi CP-X615.

A complete Hitachi manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hitachi CP-X615 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hitachi CP-X615, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hitachi CP-X615, that we can find in the current document
3. Tips how to use the basic functions of the device Hitachi CP-X615 - which should help us in our first steps of using Hitachi CP-X615
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hitachi CP-X615
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hitachi CP-X615 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hitachi CP-X615?

Use the form below

If you did not solve your problem by using a manual Hitachi CP-X615, ask a question using the form below. If a user had a similar problem with Hitachi CP-X615 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)