Manual Hotpoint BD42 Mk2

40 pages 0.88 mb
Download

Go to site of 40

Summary
  • Hotpoint BD42 Mk2 - page 1

    Instructions f or Installation and Use Build-in Electric double oven DY46 Mk2 BD42 Mk2 BD32 Mk2 To the Installer: Before installation, fill in the product details on the back cover of this book. The information can be found on the rating plate. To the User: You must read the instructions prior to installing and using the appliance and then retain t ...

  • Hotpoint BD42 Mk2 - page 2

    2 PLEASE READ THIS BOOKLET C AREFULL Y . Contents P age Introduction 3 Saf ety Inf ormation - Always 4 Never 5 The main parts of your Double Oven 6 The cooking systems in your Double Oven 7 T emperature Conversion Chart 8 Controls 9 Oven T imer Operation 10-15 Grill Pan and Handle 16 Operation when using T op Oven f or Grilling 17 Guide f or Grilli ...

  • Hotpoint BD42 Mk2 - page 3

    3 Introduction This appliance conforms to the following EEC Directives: Electromagnetic Compatibility Low Voltage Equipment 89/336/EEC 73/23/EEC 92/31/EEC 93/68/EEC 93/68/EEC Your new appliance is guaranteed* and will give lasting service. This guarantee is only applicable if the appliance has been installed in accordance with the installation inst ...

  • Hotpoint BD42 Mk2 - page 4

    4 Alway s ● Always make sure you remove all packaging and literature from inside the oven and grill compartments before switching on for the first time. ● Always make sure you understand the controls prior to using the appliance. ● Always keep children away from the appliance when in use as the surfaces will get extremely hot during and after ...

  • Hotpoint BD42 Mk2 - page 5

    5 Nev er ● Never leave children unsupervised where a cooking appliance is installed as all cooking surfaces will be hot during and after use. ● Never allow anyone to sit or stand on any part of the appliance . ● Never store items above the appliance that children may attempt to reach. ● Never remove the oven shelves whilst the oven is hot. ...

  • Hotpoint BD42 Mk2 - page 6

    6 The main par ts of your Double Ov en WARNING: DO NOT TOUCH THE GLASS DOORS WHEN THE OVEN IS IN USE AS THESE AREAS CAN BECOME HOT. Main Oven Temperature Selector Timer Grill/top oven element Oven Light Grill pan & Food support Oven Shelf Top Oven Door 2 Oven Shelves Meat Pan (NOT ALL MODELS) Oven Light Main Oven Door Top Oven Temperature Contr ...

  • Hotpoint BD42 Mk2 - page 7

    7 The Cooking S ystems in y our Double Oven Your new oven is equipped with three different cooking systems: 1. Conventional Heating (Top Oven ) - with upper and lower heat. This system is particularly suitable for roasting and baking on one shelf only. 2. Grilling (Top Oven) - Has a full width, fully controllable grill. The grill also has an econom ...

  • Hotpoint BD42 Mk2 - page 8

    8 T emperature Conversion Chart The chart below gives details of comparisons of oven settings for gas conventional ovens and fan oven in degrees ˚F and ˚C CONVENTIONAL OVEN ˚F ˚C 250 120 275 140 300 150 325 160 350 180 375 190 400 200 425 220 450 230 475 240 GAS MARK 1 / 2 1 2 3 4 5 6 7 8 9 FAN OVEN ˚C 100 120 130 140 160 170 180 200 210 220 ...

  • Hotpoint BD42 Mk2 - page 9

    9 Cooling Fan: A gentle flow of air will be blown below the control panel when the grill control is used and after a short period of time when the ovens are used. Note: Whenever the appliance has been used, the cooling fan may run on or restart itself after all the controls have been turned off. This indicates that the appliance is still warm. Oven ...

  • Hotpoint BD42 Mk2 - page 10

    10 Oven T imer Operation AUT OMA TIC COOKING The Top Oven and Main Oven can be controlled by the automatic timer. When the timer control has been set for one oven, it is possible to use the other oven only during the same automatic cooking programme. HINTS ON A UTOMA TIC COOKING 1. Select foods which will require the same cooking time and temperatu ...

  • Hotpoint BD42 Mk2 - page 11

    Know Y our T imer 11 CLOCKF ACE The timer incorporates a 24 hour clock. Ensure the correct time of day is always set, before using your cooker. S YMBOLS A ‘bell’ symbol will light up when you select a Minute Minder Period and will remain lit for the period set. At the end of the Minute Minder Period, the timer will emit an audible tone and the ...

  • Hotpoint BD42 Mk2 - page 12

    Electronic Clock & Automatic Ov en Timer Operation 12 SETTING THE TIME OF DA Y Step 1 Make sure all oven controls are turned Off. Step 2 Check the electricity supply to the cooker is turned on. Step 3 When switched on the display will show 0.00 and the Auto symbol , flashing intermittently. Step 4 Press & hold in both the Cook Period & ...

  • Hotpoint BD42 Mk2 - page 13

    Electronic Clock & Automatic Ov en Timer Operation 13 Step 3 Press and hold in the Cook Period button. The display will read 0.00 with the ‘cookpot’ symbol lit. Step 4 With the Cook Period button still held in, set the required Cook Period using the “+” and “–” buttons. Release the buttons and the timer display will revert to the ...

  • Hotpoint BD42 Mk2 - page 14

    Electronic Clock & Automatic Ov en Timer Operation 14 Step 4 Press & hold in the Cook Period button, the display will read 0.00 and the ‘cookpot’ symbol will light up. With the Cook Period button still held in set the required Cook Period using the “+” and “–” buttons. Example: 1hr 30 minutes (as shown). Note: Cook Period is t ...

  • Hotpoint BD42 Mk2 - page 15

    Electronic Clock & Automatic Ov en Timer Operation 15 OTHER NOTES ON TIMER OPERATION 1. When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook Period button. 2. When cooking Automatically the End Time can be checked at any time by simply pressing the End Time button. 3. Having set a Cook Period and End ...

  • Hotpoint BD42 Mk2 - page 16

    The grill pan handle is detachable from the pan, to facilitate cleaning and storage. The grill pan handle can be fixed as follows: Step 1 Remove the screw and washers from the grill pan bracket (a). Step 2 Tilt the handle over the recess (b). Step 3 Slide it towards the centre of the pan (c). Step 4 Locate the handle over the bracket (d). For a fix ...

  • Hotpoint BD42 Mk2 - page 17

    Step 1 Ensure oven timer is set to manual. Place the shelf in the correct position (see Grilling Guide). Place the food/grill pan on the shelf, positioned centrally under the grill element. Leave the top oven door fully open. Step 2 Turn knob (A), clockwise for FULL grill or anti-clockwise for HALF grill, to select the grill setting MIN (1) – MAX ...

  • Hotpoint BD42 Mk2 - page 18

    18 Guide to Grilling FOOD Toasting of Bread Products Small cuts of meat, Sausage, Bacon Chops etc. Gammon steaks Fish: Whole Fillets Fingers Setting 4 or MAX 8 - 12 minutes 10 - 15 minutes 10 - 20 minutes Pre-cooked potato products Pizzas Browning of food eg. Cauliflower Cheese SETTING (depending on Model) APPROXIMATE COOKING TIME PAN TO BE USED PR ...

  • Hotpoint BD42 Mk2 - page 19

    19 The top oven should be used to cook small quantities of food. The oven is designed so that the grill element operates at a reduced heat output, this is combined with a heating element situated underneath the floor of the oven. To ensure even cooking of the food it is important that cooking utensils are positioned correctly on the oven shelf so t ...

  • Hotpoint BD42 Mk2 - page 20

    ❍❍ ❍ 20 Step 1 Check that the timer is in manual. Step 2 Place the shelf in the correct position (see Oven Temperature Charts). Step 3 Select the required cooking temperature, (100–220˚C or MAX depending on Model) using control (B) (see Top Oven Temperature Charts). The pilot light ( ● ) will immediately come on, and remain on until the ...

  • Hotpoint BD42 Mk2 - page 21

    Note: If soft margarine is used for cake making, temperatures recommended by the manufacturers should be followed. Temperatures recommended in this chart refer to cakes made with block margarine only. Oven T emperature Char ts – Baking 21 Scones Food Pre- heat Yes 210/220 10-15 Runner 2 from bottom of oven. Runner 2 from bottom of oven. Runner 2. ...

  • Hotpoint BD42 Mk2 - page 22

    Oven T emperature Char ts – Meat Beef/ Lamb (slow roasting) Meat 170/180 35 mins per 450g (1 lb) + 35 mins over. Runner 1 from bottom of oven. 35-40 mins per 450g (1 lb) 40 mins per 450g (1 lb) + 40 mins over 40 mins per 450g (1 lb) 40-45 mins per 450g (1 lb) + 40 mins over 40-45 mins per 450g (1 lb) 25-30 mins per 450g (1 lb) + 25 mins over 25-3 ...

  • Hotpoint BD42 Mk2 - page 23

    23 Using the Main Oven f or Fan C ooking Since a circulaire fan oven heats up more quickly and generally cooks food at a lower temperature than a conventional oven, pre-heating is often unnecessary. For guides on ‘pre-heating’, ‘cooking temperatures’ and ‘cooking times’ see “Oven Temperature Charts” later in this book. Most foods wi ...

  • Hotpoint BD42 Mk2 - page 24

    24 Operation when using the Main Oven f or F an Cooking Step 1 Check that the timer is in manual. Step 2 Place the shelf/shelves in the correct position (see Main Oven Temperature Charts. Step 3 Place the food centrally on the shelf ensuring the oven door is fully closed. Step 4 Select the required cooking temperature (80 to 230˚C or MAX, dependin ...

  • Hotpoint BD42 Mk2 - page 25

    25 Using the Main Oven f or Other Functions F AN ONL Y SETTING DEFROSTING FROZEN MEAT & POULTRY Joints of meat and whole birds should be defrosted slowly, preferably in a refrigerator (allowing 5-6 hours per lb.) or at room temperature (allowing 2-3 hours per lb.). Frozen meat or poultry must be completely defrosted before cooking in the oven. ...

  • Hotpoint BD42 Mk2 - page 26

    26 Using the Main Oven f or Other Functions ‘S’ SLO W COOK SETTING This is used for slow cooking, keeping food warm and warming plates for short periods. Extra care should be taken when warming bone china, as it may be damaged in a hot oven. ADV ANT AGES OF SLO W COOKING ARE: The oven stays cleaner because there is less splashing. Timing of foo ...

  • Hotpoint BD42 Mk2 - page 27

    Care and Cleaning 27 1. “ST A YCLEAN” OVEN LINERS (Top Oven Sides, Main Oven Sides and Rear Panel) ( a) How "Stayclean" works. The surfaces of the "Stayclean" oven liners (Main Oven rear panel) are treated with a special vitreous enamel which absorbs cooking soils. At temperatures of 220°C (425°F) or above, the special sur ...

  • Hotpoint BD42 Mk2 - page 28

    Care and Cleaning 28 2. CLEANING GRILL, T OP OVEN AND MAIN OVEN (a) Base & Rear of Top Oven and Base of Main Oven. Wipe out the oven with a damp soapy cloth. For more stubborn stains on the base of the oven use a well soaped fine steel wool soap pad. (b) Grill Pan & Oven Shelves. To prevent stains from being burnt on to the grill pan, food ...

  • Hotpoint BD42 Mk2 - page 29

    Care and Cleaning 29 3. OVEN DOORS ( a) Control Panel Regularly wipe with a clean, damp cloth and polish with a clean, dry cloth. (b) Inner Door Panels & Glass Open the door fully. The glass panel may now be washed. Stubborn stains can be removed by using a well soaped, fine steel wool soap pad. (c) Stainless trims (DY46X & BD42SS only) Reg ...

  • Hotpoint BD42 Mk2 - page 30

    Care and Cleaning 30 4 . REPLACEMENT OF THE OVEN LAMP Open the oven door and remove the oven shelves. Using a thick cloth, grip the lamp lens, unscrew anti- clockwise and remove the lens. Carefully unscrew the bulb anti-clockwise. Fit replacement bulb (25W 300°C SES) and refit lens. 5. HOW T O CLEAN THE LAMP LENS Open the oven door and remove the ...

  • Hotpoint BD42 Mk2 - page 31

    31 Care and Cleaning Take particular care not to damage the inner surface of the door inner glass that is coated with a heat reflective layer. Do not use scouring pads, or abrasive powder, which will scratch the glass. Ensure that the glass panel is not subjected to any sharp mechanical blows. Stubborn stains can be removed by using a fine steel wo ...

  • Hotpoint BD42 Mk2 - page 32

    32 Electrical Requirements For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations. Warning: This appliance must be ...

  • Hotpoint BD42 Mk2 - page 33

    33 Impor tant It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed. 1. General The appliance is designed for mounting at a safe level into an oven housing which must be secured to the bac ...

  • Hotpoint BD42 Mk2 - page 34

    34 T all Cabinet V entilation Ventilation Slot required here if cabinet does not fit to ceiling - 51mm x 457mm min. area 50mm Air Gap 50mm Air Gap Ventilation Slot required here if the cabinet does fit to the ceiling - 51mm x 457mm min. area Ventilation Slot required here 51mm x 457mm min. area Fig. 1 ...

  • Hotpoint BD42 Mk2 - page 35

    35 570mm exc. handle knobs 882mm 595mm 561mm 562mm 870mm 882mm, 870mm if cooker trim is to overlap top edge of shelf * excluding pipe work and other projections 4mm 2 Cable to Hob if fitted 4mm 2 Cable To Oven 6mm 2 Cable if hob fitted Connector Box Fig. 4 Fig. 2 550mm 550mm min * 562mm Viewed down through cabinet No. 6 x 25mm screw (4 supplied) Ov ...

  • Hotpoint BD42 Mk2 - page 36

    36 If something goes wrong... Slight odour or small amount of smoke when grill / oven used first time This is normal and should cease after a short period. Nothing Works If you find that the timer display is blank, then it is likely that there is no electricity supply to your oven. Check: (i) That the main cooker wall is switched on (ii) Other appl ...

  • Hotpoint BD42 Mk2 - page 37

    If something goes wrong... Oven lamp does not work The oven lamp is not covered by the guarantee. The part is easily changed (see the section on oven lamp replacement). A new lamp may be obtained from our Genuine Parts & Accessories Hotline (see ‘Key Contacts’, back page). Grilling is uneven Ensure that Grill pan has been positioned as stat ...

  • Hotpoint BD42 Mk2 - page 38

    Satisfaction Guaranteed or Your Money Back Hotpoint gives you a unique ‘Satisfaction Guaranteed’ promise – valid for ninety days after you have purchased your Hotpoint product. If there is a technical problem with your Hotpoint appliance, just call Hotpoint Service (see back page). If necessary we will arrange for an engineer to call. If the ...

  • Hotpoint BD42 Mk2 - page 39

    39 Notes ...

  • Hotpoint BD42 Mk2 - page 40

    PRINTED BY SIMLEX . FOUR ASHES, WOLVERHAMPTON. 09/2006 Part no. 195059689.00 Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB K ey C ontacts After Sales Service Over 1100 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offe r . Repair Service and Informat ...

Manufacturer Hotpoint Category Microwave Oven

Documents that we receive from a manufacturer of a Hotpoint BD42 Mk2 can be divided into several groups. They are, among others:
- Hotpoint technical drawings
- BD42 Mk2 manuals
- Hotpoint product data sheets
- information booklets
- or energy labels Hotpoint BD42 Mk2
All of them are important, but the most important information from the point of view of use of the device are in the user manual Hotpoint BD42 Mk2.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Hotpoint BD42 Mk2, service manual, brief instructions and user manuals Hotpoint BD42 Mk2. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Hotpoint BD42 Mk2.

Similar manuals

A complete manual for the device Hotpoint BD42 Mk2, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Hotpoint BD42 Mk2 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Hotpoint BD42 Mk2.

A complete Hotpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Hotpoint BD42 Mk2 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Hotpoint BD42 Mk2, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Hotpoint BD42 Mk2, that we can find in the current document
3. Tips how to use the basic functions of the device Hotpoint BD42 Mk2 - which should help us in our first steps of using Hotpoint BD42 Mk2
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Hotpoint BD42 Mk2
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Hotpoint BD42 Mk2 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Hotpoint BD42 Mk2?

Use the form below

If you did not solve your problem by using a manual Hotpoint BD42 Mk2, ask a question using the form below. If a user had a similar problem with Hotpoint BD42 Mk2 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)