English dropdown-ico

Manual Husqvarna 322 L

36 pages 1.49 mb
Download

Go to site of 36

Summary
  • Husqvarna 322 L - page 1

    Oper ator's manual (EP A II) Please read these instructions car efully and make sur e you understand them bef ore using the machine. English 322L 323L 325C 325C X-SERIES 325L X-SERIES 325L XT-SERIES 325LD X-SERIES ...

  • Husqvarna 322 L - page 2

    2 – English Symbols SYMBOL EXPLANA TION W ARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can r esult in serious or fatal injury to the operator or others. Read through the O perator‘ s Manual carefully and understand the content before using the machine. Always use • A protective helmet where ther ...

  • Husqvarna 322 L - page 3

    English – 3 CONTENTS List of contents SYMBOL EXPLANA TION Symbols ............................................................................... 2 CONTENTS List of contents .................................................................... 3 SAFETY INSTRUCTIONS P ersonal protective equipment ............................................. 4 The ...

  • Husqvarna 322 L - page 4

    4 – English The machine‘s saf ety equipment This section describes the machine ‘ s safety equipment, its function and how checks and maintenance ar e carried out to ensure that it operates correctly . (See the chapter “What is what“ to locate where this equipment is positioned on your machine.) P ersonal pr otective equipment SAFETY INSTR ...

  • Husqvarna 322 L - page 5

    English – 5 SAFETY INSTR UCTIONS 4. Vibration damping system Y our machine is equipped with a vibration damping system, which is designed to give as vibration-free and comfortable use as possible. U se of incorrectly wound cord or incorr ect cutting equipment increases the level of vibration. The machine ’ s vibration damping system reduces the ...

  • Husqvarna 322 L - page 6

    6 – English 3. Cutting attachment guard • Ensure that the spray guard is undamaged and is not cracked. • Replace the guard if it has been exposed to impact or is cracked. • Always use the prescribed blade an guard combination, see chapter "Technical data" . SAFETY INSTR UCTIONS Contr ol, maintenance and service of the machine ‘ ...

  • Husqvarna 322 L - page 7

    English – 7 SAFETY INSTR UCTIONS 6. Cutting equipment The section describes how through corr ect maintenance and through using the right type of cutting equipment you can: • Obtain maximum clearing capacity. • Increase the service life of the cutting equipment. T wo basic rules: 1) Only use the cutting and guard equipment we recommend! See ch ...

  • Husqvarna 322 L - page 8

    8 – English SAFETY INSTR UCTIONS General safety instructions Transport and storage • Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, electrical switches/power switches, heaters or the like. • When storing and tra ...

  • Husqvarna 322 L - page 9

    English – 9 ! General w orking instructions SAFETY INSTR UCTIONS Basic working techniques • Always drop to idling speed after each working operation. Longer periods running at full throttle without loading the engine (that is without resistance, which the engine feels from the cutting equipment when trimming) can lead to serious engine damage. ...

  • Husqvarna 322 L - page 10

    10 – English SAFETY INSTR UCTIONS Clearing • The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. NOTE! This technique increases the wear on the cord. • The cord wears quicker and must be fed forward ...

  • Husqvarna 322 L - page 11

    English – 11 WHA T IS WHA T? What is what on the trimmer? 1. T rimmer head 2. Gr ease filler cap 3. Angle gear 4. Spray guar d 5. Shaft 6. Loop handlebar 7. Throttle 8. Stop switch 9. Throttle trigger lock 10. C ylinder cov er 11. S tarter handle 12. F uel tank 13. Choke 14. Air purge 15. Air filter cov er 16. Clutch cov er 17. Handlebar adjustme ...

  • Husqvarna 322 L - page 12

    12 – English ASSEMBL Y Assembl y of the trimmer head ! W ARNING! Under no circumstances ma y the cutting equipment be used without an appro ved guard fitted. See the chapter “T echnical data” . If the wr ong guard or a def ective guard is fitted this can cause serious personal injury . Assembling the loop handlebar (322L, 323L, 325L X , 325L ...

  • Husqvarna 322 L - page 13

    English – 13 ASSEMBL Y Fitting the spra y guar d and trimmer head (325C) Guard • Fit the guard as shown in the diagram. Tighten securely. Trimmer head • Fit the dust cup on the shaft. The nut must be completely covered by the dust cup. • Hold the dust cup with a spanner to prevent the shaft from rotating. • Screw the trimmer head onto the ...

  • Husqvarna 322 L - page 14

    14 – English Fitting the spra y guar d and trimmer head (325C X ) • Fit the guard as shown in the diagram. Tighten securely. • Insert the locking pin into the hole to lock the axle. • Screw the trimmer head onto the shaft. Tighten securely. ASSEMBL Y ...

  • Husqvarna 322 L - page 15

    English – 15 FUEL HANDLING Fuel mixture ! W ARNING! Alwa ys provide good ventilation when handling fuel. NO TE! The machine is fitted with a two-stroke engine and must always be run on a mixture of gasoline and two-stroke oil. I t is important to measure the quantity of oil accurately , to ensure the correct mixtur e ratio. S mall discrepancies i ...

  • Husqvarna 322 L - page 16

    16 – English ST AR T AND ST OP Cold engine IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position. AIR PUR GE: P ress the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled. Warm engine U se the same star ting procedure as for the col ...

  • Husqvarna 322 L - page 17

    English – 17 Fine adjustment • When the machine has been ” run-in ” the carburetor should be finely adjusted. The fine adjustment should be carried out by qualified person. First adjust the L-jet, then the idling screw T and then the H-jet. Conditions • Before any adjustments are made the airfilter should be clean and the airfilter cover ...

  • Husqvarna 322 L - page 18

    18 – English Correctly adjusted carburetor A correctly adjusted carburetor means that the machine accelerates without hesitation and the machine 4-cy cles a little at max speed. F urthermore, the cutting attachment must not rotate/mo ve at idling. A too lean adjusted low speed needle L may cause starting difficulties and bad acceleration. A too l ...

  • Husqvarna 322 L - page 19

    English – 19 MAINTENANCE Cooling system T o maintain as low opera- ting temperature as possible the engine is equipped with a cooling system. The cooling system consists of: 1. An air intake on the starter unit. 2. Cooling fins on the flywheel. 3. Cooling fins on the cylinder 4. Cylinder cover (leads cold air onto the cylinder). Muffler NO TE! So ...

  • Husqvarna 322 L - page 20

    20 – English MAINTENANCE NO TE: U se only HUSQ V ARNA replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others. Y our warranty does not cov er damage or liability caused by the use of accessories and/or attachments not specifically recommended by HUSQ V ARNA. Maintenance schedul ...

  • Husqvarna 322 L - page 21

    English – 21 TECHNICAL D A T A T echnical data Engine Displacement, cu. in/cm 3 C ylinder bore, inch/mm S troke length, inch/mm Recommended max. speed, rpm I dling speed, rpm S peed of output shaft, rpm Max. engine output, acc. to ISO 8893, kW/rpm Catalytic converter muffler S peed-regulated ignition system Ignition system Manufactur er/type of i ...

  • Husqvarna 322 L - page 22

    22 – English 325C X-series 1,50/24,5 1,34/34 1,06/27 11 000 - 11 700 2 700 11 700 0,9/ 9 000 Ye s No W albr o MB 20 Champion R CJ 7Y 0,02/0,5 Zama C1Q 1,06/0,5 9,3/4,2 92/97 2,5/2,1 3,2/2,2 4,4/4,2 6,2/8,4 T echnical data Engine Displacement, cu. in/cm 3 Cylinder bor e, inch/mm S troke length, inch/mm Recommended max. speed, rpm I dling speed, rp ...

  • Husqvarna 322 L - page 23

    English – 23 TECHNICAL D A T A Approved accessories Thread blade shaft 3/8 T rimmer head Cutting attachment guard Art No. 537 02 61-01 537 02 61-01 537 02 61-01 Type Trimmy Hit Junior (R) Trimmy Fix 3/8" (R) Trimmy Hit VII (R) Approved accessories Thread blade shaft M10 Plastic knives T rimmer head Cutting attachment guard Art No. 503 93 42- ...

  • Husqvarna 322 L - page 24

    24 – English EMISSION CONTR OL W ARRANTY ST A TEMENT Y OUR W ARRANTY RIGHTS AND OBLIGA TIONS The EPA (The US Environmental Protection Agency), Environment Canada and Husqvarna Forest & Garden are pleased to explain the emissions control system warranty on your 2001 and later small nonroad engine. In U.S. and Canada, new small nonroad engines ...

  • Husqvarna 322 L - page 25

    English – 25 1 Super Auto II Super Auto II 1 2 3 4 5 6 7 8 9 10 4,0 m 13' 2,4 mm .095" ~2,0 m 6,5 ' 6 " 6 " " 15 cm 15 cm ...

  • Husqvarna 322 L - page 26

    26 – English 1 T ri Cut 2 3 4 5 6 7 8 >20mm >20mm ! B A 6 Nm X 10 ...

  • Husqvarna 322 L - page 27

    English – 27 1 T rimmy H II 2 3 4 5 6 7 8 9 7,5 m 25' 2,0-2,4 mm .080-.095" 1 2 15 cm 6" ~ 3,7 m 12' 15 cm 6" ...

  • Husqvarna 322 L - page 28

    28 – English 1 T rimmy Hit 23 4 5 6 7 8 9 10 11 “Click” “Click” 7,0 m 23' " 12 cm 5" ~ 3,5 m 1 1' 15 cm 6 " " 2,0-2,4 mm .080-.095 ~ 15 cm 6 ...

  • Husqvarna 322 L - page 29

    English – 29 1 T rimmy Hit Junior 2 5 6 7 8 9 10 12 “Click” 3 4 5,75 m 19' 2,0-2,4 mm .080-.095" 15 cm 6" ~ 2,8 m 9' 1.) 2.) 11 15 cm 6" 15 cm 6" ...

  • Husqvarna 322 L - page 30

    30 – English 1 T rimmy Hit Pro 2 5 6 7 8 9 10 12 “Click” 3 4 7,5 m 25' 2,0-2,4 mm .080-.095" 15 cm 6" ~ 3,7 m 12' 1.) 2.) 11 15 cm 6" 15 cm 6" ...

  • Husqvarna 322 L - page 31

    English – 31 1 T rimmy Hit VI 2 5 6 3 4 7 8 9 10 11 “Click” 7,0 m 23' " 12 cm 5" ~ 3,5 m 1 1' 15 cm 6 " " 2,0-2,4 mm .080-.095 ~ 15 cm 6 ...

  • Husqvarna 322 L - page 32

    32 – English 1 2 3 4 5 6 7 8 9 35-50 NM ~ 15 cm 6' "Clic" ~ 3,5 m 11 ' 7,0 m 23' 2,4-3,3 mm .095"-.130" 12 cm 5" T rimmy SII ...

  • Husqvarna 322 L - page 33

    English – 33 ...

  • Husqvarna 322 L - page 34

    34 – English 6" 2) 1) ~ 15 cm 6" 7 8 9 10 11 15 cm 12 3 4 56 7,0 m 23" 2,0- mm , 080-." 12 cm 5" ~ 3,5 m 1 1" T rimmy VII ´+H)y¶5h¨ ...

  • Husqvarna 322 L - page 35

    English – 35 ...

  • Husqvarna 322 L - page 36

    2002W11 ´+H)y¶5h¨ 114 00 98-95 ...

Manufacturer Husqvarna Category Trimmer

Documents that we receive from a manufacturer of a Husqvarna 322 L can be divided into several groups. They are, among others:
- Husqvarna technical drawings
- 322 L manuals
- Husqvarna product data sheets
- information booklets
- or energy labels Husqvarna 322 L
All of them are important, but the most important information from the point of view of use of the device are in the user manual Husqvarna 322 L.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Husqvarna 322 L, service manual, brief instructions and user manuals Husqvarna 322 L. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Husqvarna 322 L.

Similar manuals

A complete manual for the device Husqvarna 322 L, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Husqvarna 322 L by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Husqvarna 322 L.

A complete Husqvarna manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Husqvarna 322 L - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Husqvarna 322 L, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Husqvarna 322 L, that we can find in the current document
3. Tips how to use the basic functions of the device Husqvarna 322 L - which should help us in our first steps of using Husqvarna 322 L
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Husqvarna 322 L
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Husqvarna 322 L in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Husqvarna 322 L?

Use the form below

If you did not solve your problem by using a manual Husqvarna 322 L, ask a question using the form below. If a user had a similar problem with Husqvarna 322 L it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)