-
Canon WFT-E2 II - page 1
Wireless File T ransmitter WFT -E2 II Instruction Manual for Us e With EOS-1D Mark IV T o EOS-1D Mark III or E OS-1Ds Mark III Users This i nstructi on manual des cribes th e use of t he transmi tter when connected to the EOS-1D Mark I V . When using the transmitter with the EOS-1D Ma rk III or EOS-1Ds Mark III, refer to the PDF manual in the EOS_1 ...
-
Canon WFT-E2 II - page 2
2 The Wireless File Transmitter WFT -E2 II is an ac cessory for EOS-1D Mark IV ca mera. It gives the camera wireless and wired LAN fun ctional ity and adds a USB port, enabling the following operations. Introduction Wireless and Wired LAN Functions FTP T ransfer EOS Utility WFT Server T ransfer images to an FTP server Use a web browser to capture, ...
-
Canon WFT-E2 II - page 3
3 Introduction Functions When Connected via USB External Media Record or backup ima ges onto external media Add the latitude, longi tude, altitude, dat e and time, and other shooting informat ion to images GPS Connected by a USB cabl e Connected via Bluet ooth C OP Y ...
-
Canon WFT-E2 II - page 4
4 These instructions should be foll owed only after your wireless or wired LAN and FTP server settings are complete. For details on configur ing these settings, refer to the documentation provided with the respective equipment. T erms in bra ckets [ ] indicate button or icon names or other software elements. Bracket s also denote camera menu items. ...
-
Canon WFT-E2 II - page 5
5 Chapter List Introduction 2 Basic Network Settings 15 T ransferring Images to an FTP Ser ver 29 Remote Capture Using EOS Utility 43 Remote Capture Using WFT Server 49 Linked Shooting 61 Managing Settin gs Information 65 Using External Media 71 Using GPS Devices 83 T roubleshooting 91 Reference 109 1 2 3 4 5 6 7 8 9 10 C OP Y ...
-
Canon WFT-E2 II - page 6
6 Introduction 2 Convention s Used in th is Manual .......... ............. .......... .............. .......... ............. ........... ............. .. ...... 4 Chapter L ist..... .......... .......... .............. .......... ........... .......... ............. ........... .......... ................ .......... ...... 5 Contents ....... .... ...
-
Canon WFT-E2 II - page 7
7 Contents 6 Managing Settings In formation 65 Checking Settings ..................... ............. .......... ........... .......... ............. ........... .......... ........... ........ ...... 66 Changing Settings...... .............. ............. ............. ............. ............. ............. ............... .......... ........... ...
-
Canon WFT-E2 II - page 8
8 T o comply with local radio wave regulations in var ious areas around the world, Canon offers four region-specific versio ns of the trans mitter (WFT-E2 IIA, E2 IIB, E2 IIC, and E2 IID) as described below . Please do not use your model (version) of trans mitter in regions it was not designed for . For information on other areas wher e the tr ansm ...
-
Canon WFT-E2 II - page 9
9 Areas of Use and Restrictions The following actions may be punishable un der law . Disassembling or modifying the transmitter , or removing the certification label on it. Do not use the transmitter near other devices that emit ra dio waves, such as medical equipment or electronic devices. The tra nsm itter may interfere with oper ation of these d ...
-
Canon WFT-E2 II - page 10
10 The following precautions are intended to prevent harm to you and others as w ell as damage to equipment. Become familiar with the precautions before using t he transmitter to ensu re correct and safe operation. T o prevent fire, excessive heat, chemical leakage, or explosion, follow these safety guidelines. • Do not insert metallic objects be ...
-
Canon WFT-E2 II - page 11
11 Nomenclature USB port Ethernet RJ-45 port T e rminal cap receptacle (Not used with t he EOS-1D Mark IV) < USB > USB lamp < LAN > Network lamp Port cover Locking lever Attachment p in T ightening screw T erminal External Media Case* 1 W aterproof/Dustproof U SB Cap* 2 T ransmitter Case *1: For storing portable hard disks or other devi ...
-
Canon WFT-E2 II - page 12
12 T urn off the camera before attaching the transmitter . Ensure the camera battery has sufficie nt charge. If the charge drops below 19%, you cannot transfer capt ured images or back th em up to external media. 1 Open the ter minal cover on th e camera. Open the extension system terminal cover and turn it toward the bottom. 2 Move the lever into ...
-
Canon WFT-E2 II - page 13
13 Click one of the following chapter ti tles to view the corre sponding page. Subsequent Organization of This Manual 1 Basic Network Settings (p.15) 2 Transferring Images to an FTP Server (p.29) 3 Remote Capture Us ing EOS Utility (p.43) 4 Remote Capture Usin g WFT Server (p.49) 5 Linked Shooting (p.61) 6 Managing Settings Information (p.65) 7 Usi ...
-
Canon WFT-E2 II - page 14
14 C OP Y ...
-
Canon WFT-E2 II - page 15
15 Basic Network Settings Complete the basic network settings by following transmitter connection instructions on the camera menu screen . C OP Y ...
-
Canon WFT-E2 II - page 16
16 The connection instructions help you follow t he steps to connect the transmitter to an existing wireless or wired LAN. T o connect t o a wireless LAN, prepare the wirele ss LAN terminal (wireless LAN access point or wireless LAN adapter) and computer in advance so that they are ready for you to connect the transmitter to the wireless network. W ...
-
Canon WFT-E2 II - page 17
17 This section describes the process of follow ing the conne ction instructions. If an error is displayed, refer to “Troubleshooting” in Chapter 9 (p.91) and check the settings. Pressing the shutter button or other camera c ontr ols during configuration by the connection instructions will close the connection instructio ns. Do not press the sh ...
-
Canon WFT-E2 II - page 18
18 T urn the < 5 > dial to select the communication method, and then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. • FTP trans. Choose this option to transfer captured images to an FTP server . Images can be automatically transferred as y ou shoot them, or you can select images to be transfered later . Com ...
-
Canon WFT-E2 II - page 19
19 Selecting the Communication Method and LAN Type • WFT server Choose this option for remote capture over a wi r eless or wired LAN with the transmitter acting as a server . Additionally , images on a memory card in the camera can be viewed and downloaded to a computer . The camera can be accessed like browsin g a webpage, by users at up to thre ...
-
Canon WFT-E2 II - page 20
20 Selecting the Communication Method and LAN Type For [LinkedShot] instructions, refer to pa ge 61. Note that no information about [LinkedShot] is given in th is chapter . T urn the < 5 > dial to select the type of LAN, and then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. Wireless LAN The [ Wireless LAN s ...
-
Canon WFT-E2 II - page 21
21 When you select [ Connect with wizard ], active wireless LAN termi nals in your area are listed, accompanied by information about them. Select the SSID (or ES S-ID) of your desired wireless LAN terminal. 1 Select [Connect with wizard]. T urn the < 5 > dial to select [ Connect with wizard ], and then press < 0 >. 2 Select the wireless ...
-
Canon WFT-E2 II - page 22
22 Using the Wizard to Establish a Connection Next, enter the encryption key of the wire less LAN terminal. For details on the encryption key , refer to the device’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary dep ending on the authentication and encryption of the wireless LAN termina l. 1 The [ Key index ] scre ...
-
Canon WFT-E2 II - page 23
23 This is a connection mode w hen using a wireless LA N terminal compatible with Wi-Fi Protected Setup (WPS). Pushbutton Connection mode (PBC mode) makes it easy to establish a connection between the camera and the wireless LAN terminal by pressing the WPS button on the wireless LAN terminal. Note that if multiple wireless LAN terminals are active ...
-
Canon WFT-E2 II - page 24
24 This is a connection mode w hen using a wireless LA N terminal compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (P IN mode) , an 8-digit identification number specified on the camera is set on the wirele ss LAN te rminal to establish a connection. Even if there are multip le wireless LAN terminals ac tive in your area, th ...
-
Canon WFT-E2 II - page 25
25 T urn the < 5 > dial to select how to configure the network settings, and then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. [Auto setting] Settings otherwise configured with [ Manu al setting ] can be con figured automatically . However , the IP address and similar se ttings must be automatically assigne ...
-
Canon WFT-E2 II - page 26
26 Configuring Network Settings The following instructions are for settings screens that vary depending on the communication method (FTP Transfer , EOS Utility , or WFT Server) , as shown below . Read the page that introduces the selected communication method. FTP trans. Chapter 2 (p.29) EOSUtility Chapter 3 (p.43) WFT server Chapter 4 (p.49) Compl ...
-
Canon WFT-E2 II - page 27
27 Configuring Network Settings The virtual keyboard is displayed during entry of the encryption key , server name, and other information. Switching to other input a reas T o switch betwe en input areas, press the < H > button. Moving th e cursor T o move the cursor, turn the < 5 > dial. Y ou can also move the cursor using < 9 >. ...
-
Canon WFT-E2 II - page 28
28 C OP Y ...
-
Canon WFT-E2 II - page 29
29 Transferring Images to an FTP Server With FTP transfer , you can automatically transfer each image to the FTP server as you shoot or transfer a set of shots together . C OP Y ...
-
Canon WFT-E2 II - page 30
30 These instructions are continued from Chapter 1. 1 T urn the < 5 > dial to select [ Address setting ], and then press < 0 >. 2 If you have set the DNS server setting to [ Disable ], the screen at left is displayed. Press < 0 > to select the input position, and then turn the < 5 > dial to enter the IP address of th e FTP s ...
-
Canon WFT-E2 II - page 31
31 Configuring FTP Communication Settings 6 Complete the [ Login method ] settings. T urn the < 5 > dial to select [ OK ], and then press < 0 > to go to the next screen. 7 Complete the [ T arget folder ] settings. Select [ Root folder ] to have images saved in the root folder as specified in FTP server settings. (p.41) Select [ Select f ...
-
Canon WFT-E2 II - page 32
32 An image can be automatically transferred to the FTP server immediately after shooting. Y ou can also continue shooting even w hile images are being transferred. Before shooting, be sure to insert a memory card in the camera or connect external media (p.71). If you shoot wit hout recording images, they cannot be transferred. Note that automatic ...
-
Canon WFT-E2 II - page 33
33 Automatic Image Transfer After Each Shot In automatic transfer during shooting , you can choo se which images to transfer if different sizes of images are recorded to the memor y card and external media, or during RAW+JPEG shooting. 1 In [WFT settings], select [Set up]. 2 Select [T ransfer type/size]. 3 Select the size and type of images to tran ...
-
Canon WFT-E2 II - page 34
34 Simply select an image and press < 0 > to transfer it. Y ou can also add a caption befo re transferring images. Y ou can also continue s hooting even while images are being transferr ed. 1 In [WFT settings], select [Set up]. 2 Select [T ransfer with SET]. Select [ Enable ]. 3 Select the i mage. On the camera body , press t he < x > b ...
-
Canon WFT-E2 II - page 35
35 Transferring Images Individually Y ou can add a registered caption to each image before transfer . This is effective if you want to inform the recipient the printing quantity , for e xample. The caption is also added to images stored on the camera. For instructions on creatin g and registering caption s, refer to page 1 10. Y ou can check for ca ...
-
Canon WFT-E2 II - page 36
36 After shooting, you can select multiple images as desired and transfer t hem all at once. Y ou can also transfer unsent images or imag es that could not be sent previo usly . If both a CF card and SD car d are used at the sa me time, or if ext ernal media is connected, images are transferred from the source specified on the menu [ 5 ] tab, in [ ...
-
Canon WFT-E2 II - page 37
37 Batch Transfer 4 T ransfer the images. Select [ T ransfer ]. Select [ OK ] on the confirmation screen displayed next. X A transfer progress screen is displa yed. During image transfer , the < LAN > lamp blinks. Y ou can use the menu even during image transf er. However , to prevent transfer problems, some menu items are unavailable during ...
-
Canon WFT-E2 II - page 38
38 Batch Transfer 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [Sel . n ]. 3 Select [Folder images not transfer ’d]. T o transfer images that could not pr eviously be transferred, select [ Folder ima ges failed transf. ]. 4 Select a folder . 5 T ransfer the images. Select [ T ransfer ]. Select [ OK ] on the confirmation screen dis ...
-
Canon WFT-E2 II - page 39
39 Batch Transfer 1 In [WFT settings], select [Image sel./ transfer]. 2 Select [All image]. 3 Select [Card i mages no t transferred] . T o transfer images that could not pr eviously be transferred, select [ Card images failed transfer ]. 4 T ransfer the images. Select [ T ransfer ]. Select [ OK ] on the confirmation screen displayed next. X A trans ...
-
Canon WFT-E2 II - page 40
40 T o check the transfer h istory , in [ Image sel./transfer ], select [ Sel.Image ]. Image not selected for trans fer (no icon) Image selected for transfer Image could not b e transferred Image transferre d On the [ Image sel./transfer ] screen, you can check the number of images for transfer as well as the transfer history of images in the selec ...
-
Canon WFT-E2 II - page 41
41 Images transf erred to the FTP server ar e stored in the foll owing folder as specified in t he FTP server settings. Under the default settings of the FTP server, images are stored in [ C drive ] [ Inetpub ] folder [ ftproot ] folder , or in a subfolder of this folder. If the root folder of the transfer destination has been changed in th ...
-
Canon WFT-E2 II - page 42
42 C OP Y ...
-
Canon WFT-E2 II - page 43
43 Remote Capture Using EOS Utility Y ou can use EOS Utility to shoot remo tely over a wireless or wired LAN. In addition to remote capture, all camera operations in EOS Utility are supported because a wireless or wired network is used with this option instead of the USB cable. C OP Y ...
-
Canon WFT-E2 II - page 44
44 These instructions are continued from Chapter 1. With EOS Utility , you can use the included WF T Pairing Software to establish a connection between the transmitter and a computer. WFT Pairing Software is installed automatically during easy installation of the sof tware provided with the camera. If it is no t installed, install it on the compute ...
-
Canon WFT-E2 II - page 45
45 Configuring EOS Utility Communication Settings 3 Double-click the pairing software icon. X Detected cameras are listed. Cameras that have already been connected are not included in the list. Click [ Connect ]. If multiple cameras are displayed, identify the camera to connect to by its [ MAC address ] or [ IP address ]. Y ou can check the [ MAC a ...
-
Canon WFT-E2 II - page 46
46 Configuring EOS Utility Communication Settings There is no need to complete pairing again if y ou will continue using a particular camera, transmitter , and computer together after pairing without changing the settings. Before your next PTP session, simply turn on the camera to wh ich the transmitter is attached and start the pairing sof tware. ...
-
Canon WFT-E2 II - page 47
47 For EOS Utility instructions, refer to the Softwa re Instruction Manual (PDF). Y ou can take full advantage of EOS Utility via the transmitter just as via a USB connection, without restr ictions. Using EOS Utility In Remote Li ve Vi ew shooting, the rate of image transmission is slo wer than via USB. The motion of moving subjects cannot be disp ...
-
Canon WFT-E2 II - page 48
48 C OP Y ...
-
Canon WFT-E2 II - page 49
49 Remote Capture Using WFT Server Using a web b rowser , you can view images on a me mory card in the camera and download them to a computer . Additionally , you ca n shoot remotely over a wireless or wired LAN. Note tha t bulb and movie shooti ng are not supported. C OP Y ...
-
Canon WFT-E2 II - page 50
50 These instructions are continued from Chapter 1. Press < 0 >. T urn the < 5 > dial to select the set number , and then press < 0 >. Press < 0 > again. After the connection wizard is closed, the display reverts to the menu screen. X The < LAN > lamp on the transmitter is lit in green. Settings information is stored o ...
-
Canon WFT-E2 II - page 51
51 Configuring WFT Server Communication Settings 3 T urn the < 5 > dial to select [ WFT account ], and then press < 0 >. When changing the port number , turn the < 5 > dial to select [ Port number ] and press < 0 >. Note that there is normally no need to change the por t number (80). 4 Select a user number . With WFT Server ...
-
Canon WFT-E2 II - page 52
52 In the web browser , display WFT Server , a screen for transmitter operations. Make sure you have already established a connect ion between the camera and computer . 1 St art the web browser . First, start Internet Explorer or another web browser . 2 Enter the URL. In the address field, enter the IP address assigned to the camera. Press the < ...
-
Canon WFT-E2 II - page 53
53 Browse images on the camera’s memory card as follows. 1 Click [Viewer]. X The image viewing sc reen is displayed. 2 Select the memory card. Click [ CF ], [ SD ], or the external media. Click the [ DCIM ] folder and select the fold er containing the images. 3 Select an image. T o view another image, click th e < > buttons or jump to other ...
-
Canon WFT-E2 II - page 54
54 Viewing Images 4 Download images to th e computer . Click a thumbnail. X The image is displayed at a larger size. T o download the image to your computer , click <> . Click [ Return ] to return to the image viewing screen. Although actual RA W images and movies are not displayed here, they can be downloaded to the computer the same way as ...
-
Canon WFT-E2 II - page 55
55 First, prepare the camera for Live View shooting. Note that remote capture of movies is not suppor ted. For web browsers that do not s upport JavaScript, refer to page 59, “Remote Capture.” 1 Click [Camera control] . X The advanced capture scr een is displayed. * Shaded items cannot be configured via WFT Server. ② and ④ are configured on ...
-
Canon WFT-E2 II - page 56
56 Remote Capture [Camera control] 2 Set the lens focus mode switch to < f >. Under these conditions, click the release button ( ⑤ ). When you let go of the mouse button, the camera autofocuses and shoots. (See step 5.) With One-Shot AF , the camera does not shoot unless focus is achieved. T ry following the next steps to display Live Vi ew ...
-
Canon WFT-E2 II - page 57
57 Remote Capture [Camera control] 5 Configure the shooting settings. Click setting items (such as quality) to view the setting details, which you can configure. Complete the settings as needed. 6 T ake the pict ure. Click the release button ( ⑤ ). When you let g o of the mouse button, the camera shoots. X The captured image is now displayed. Cap ...
-
Canon WFT-E2 II - page 58
58 First, prepare the camera for Live View shooting. Note that remote capture of movies is not suppor ted. For web browsers that do not s upport JavaScript, refer to page 59, “Remote Capture.” 1 Click [Simple control]. X The basic capture screen is displayed, a nd Live View image is displayed. 2 Manually adjust the fo cus. Set the lens focus mo ...
-
Canon WFT-E2 II - page 59
59 The following instructions are fo r remote capture with web browsers that do no t support JavaScript. First, prepare the camera for Live View shooting. Note that remote capture of movies is not suppor ted. 1 Click [Capture]. X The capture screen is displayed. Live View image is not displayed. 2 T ake the pict ure. Set the lens focus mode switch ...
-
Canon WFT-E2 II - page 60
60 C OP Y ...
-
Canon WFT-E2 II - page 61
61 Linked Shooting With linked shooting, up to 10 slave cameras can be linked in a wirel ess network (via IEEE 802.1 1g in ad hoc mo de) to the master camera on which you will release the shutter . Any cameras compatible with linked shooting, when they have WFT series transmitters attached, can be used as slave cameras, regardless of model. Note th ...
-
Canon WFT-E2 II - page 62
62 First, establish a connection from the slave ca meras to the mast er camera. Because linked shooting utilizes a wireless connection via IEEE 802. 1 1g in ad hoc mode, it is not available over wired LANs. 1 Display the transmit ter menu. On the camera, press the < 7 > button. On the [ 7 ] tab, select [ WFT settings ] and press < 0 >. ...
-
Canon WFT-E2 II - page 63
63 Setting Up Linked Shooting 5 Set up the master camera. Configure the settings on the master camera following steps 1-3 on the previous page, and then select [ Master ]. X The following screen is displayed. 6 At this point, switch to setti ng up the slave cameras. On the slave cameras, select [ OK ]. 7 Check the number of slave ca meras. X On the ...
-
Canon WFT-E2 II - page 64
64 Arrange the slave cameras in clear view of the master ca mera, without objects between them. Y ou can arrange master camera in an overall circumference of up to approximately 100 m / 328 ft. However , the distance supported for linked shooting may be shorter dep ending on the wireless communication conditions, which are affected by how the camer ...
-
Canon WFT-E2 II - page 65
65 Managing Settings Information C OP Y ...
-
Canon WFT-E2 II - page 66
66 Check the network settings as follows. 1 In [WFT settings], select [Set up]. 2 Select [Confirm settings]. X The settings are displayed. Checking Settings E xamp l e o f FTP t rans f er an d w i re d LAN se tti ngs E xamp l e o f FTP t rans f er an d w i re l ess LAN se tti ngs C OP Y ...
-
Canon WFT-E2 II - page 67
67 Settings originally completed using the connec tion wizar d can be changed as follows. Y ou can also change IP security settings (IPsec) not comp leted using the connection wizard, as well as other settings, such as the setting that determines wh at happens if an image of the same file name as an existing file is sent to the FTP server . (p.68) ...
-
Canon WFT-E2 II - page 68
68 Changing Settings Configured in [ TCP/IP ] [ Security ]. IPsec is a set of standards for encrypted communica tion over the Internet. It provides effective security for both wireless and wired LANs. T o us e this function, you must enable IPsec in the network settings of your computer . When IPsec is employed, only transport mode is supported ...
-
Canon WFT-E2 II - page 69
69 Network settings can be saved on a memory card for use with other cameras. 1 In [WFT settings], select [Set up]. 2 Select [LAN settings]. 3 Select the settin gs number . Here, select the settings number that identifies the LAN settings. 4 Select [Change]. 5 Select [Sav e setting s]. Saving and Loading Settings Saving Settings C OP Y ...
-
Canon WFT-E2 II - page 70
70 Saving and Loading Settings 6 Select [Save]. X The settings are now saved as a file on the memory card. The settings are saved as a file (WFTNPF**.NIF) in the area of the memory card shown when the card is opened (in the root directory). The file name is determined automatically by the camera: WFTNPF , followe d by a number (01 to 99) and the ex ...
-
Canon WFT-E2 II - page 71
71 Using External Media Commercially available external medi a, connected via USB, can be used the same way as CF and SD cards. Y o u can also back up images from CF and SD cards onto external media. Note that external media must meet the following requirements. Use media conforming to the USB Mass S torage Class S pecification. If an external hard ...
-
Canon WFT-E2 II - page 72
72 Before connecting external media to the tr ansmitter , switch the camera’s power switch to < OFF >. Also turn off external media that has its own power supply . When connecting external media, be sure to use the USB cable provided with the camera. The transmitter USB po rt is not hot-pluggable. USB cables cannot be connected or disconnec ...
-
Canon WFT-E2 II - page 73
73 Connecting External Media 5 Select [OK]. Camera operations such as s hooting, menu display , or imag e playback are not possible until the connection is es t ablished. When the transmitter is connected to the external media, the transmitter ’s < USB > lamp is lit in green and a message is displayed indicating tha t a connection has been ...
-
Canon WFT-E2 II - page 74
74 Connecting External Media Before unplugging external media from the USB port, always select [ Dis connect ] as shown in step 5. Follow the instructions di splayed to terminate the connection. The connection will not be terminat ed if you simply turn off the cam era and external media. If you unplug external media while the connection is st ill a ...
-
Canon WFT-E2 II - page 75
75 Images can be stored on external media c onnected via USB just as on CF and SD cards. Y ou can also configure [ Reco rd func. ], [ Record/play ], and [ Folder ] settings (described below) to use the external media. For details, refe r to the Camera Instr uction Manual (page 56). When recording movies to a hard disk, use a hard disk with fast wri ...
-
Canon WFT-E2 II - page 76
76 Choosing Recording Media When Shooting When you select external media in [ Record/play ], the [ Select location for DCIM folder ] screen is displayed. The DCIM folder contains the EOS1D folder , where images are stored. T o create the D CIM folder in the first folder displayed when the external media is opened (that is, the root directory), sele ...
-
Canon WFT-E2 II - page 77
77 Images can be copied to external me dia c onnected via USB just as to CF and SD cards. 1 On the [ 5 ] tab, select [Record func+media/folder sel.]. X The icon for external medi a is displayed next to icons for the CF and SD cards. 2 Select the source media in [Record/ play]. After selection, press the < 7 > button to return to the menu scre ...
-
Canon WFT-E2 II - page 78
78 Images stored on CF or SD cards can be b acked up on external media. Initially , captured ima ges are stored in the DCIM folder on CF or SD cards. Selecting [ External media backup ] backs up this DC IM folder to external media. 1 On the [ 3 ] t ab, select [External media backup]. 2 Check the free sp ace on the media. Make sure more space is ava ...
-
Canon WFT-E2 II - page 79
79 Backing Up on External Media A simple method of backup is available, as follows. 1 Select [Quick backup]. 2 Select the source memo ry card. 3 Select [St art]. 4 Select [OK]. X The backup process now begins. When the message indicating completion is displayed, select [ OK ]. Quick Backup C OP Y ...
-
Canon WFT-E2 II - page 80
80 Backing Up on External Media Where the DCIM Folder is Stored The DCIM folder is stored in a directory indicated by a file path such as [ u /09103102/ ]. The target folder name comprises the current date (last two digits of the year , in addition to the month and day) and numbers representing the order the folder was created, in a range of 01 to ...
-
Canon WFT-E2 II - page 81
81 Backing Up on External Media 4 Select [Create folder ]. 5 Enter the [Folder name]. Always use 8 characters for the folder name. For instructions on entering the folder name , refer to “Virtual Keyboard Operation” (p.27). 6 Select [St art]. 7 Select [OK]. X The backup process now begins. When the message indicating completion is displayed, se ...
-
Canon WFT-E2 II - page 82
82 Backing Up on External Media The provided external media case can hold portable hard disks up to 120 x 75 x 15 mm/ 4.72 x 2.95 x 0.59 in. External Media Case C OP Y ...
-
Canon WFT-E2 II - page 83
83 Using GPS Devices Commercially available GPS devi ces connected via USB can obtain information including th e latitude, longitude, altitude, and date and time of shooting and add it to images. The additional in formation can be checked on the camera as well as by using GPS-compatible mapping software. The transmitter can be used with Garmin GPSM ...
-
Canon WFT-E2 II - page 84
84 T urn off the GPS device and camera before connecting them. When connecting GPS devices, be sure to us e the U SB cable provided with the camera. The transmitter USB po rt is not hot-pluggable. USB cables cannot be connected or disconnected at an y time. Follow the instructions in this section when co nnecting or disconnecting USB cables. 1 Plug ...
-
Canon WFT-E2 II - page 85
85 Connecting GPS Devices with a USB Cable 5 Select [OK]. After selecting [ OK ], turn the GPS device on. It may take a few minutes to establish a connection with the GPS device. Camera operations such as shooting, menu displa y , or image playb ack are not possible until the connec tion is established. When the transmitter is connected to the GPS ...
-
Canon WFT-E2 II - page 86
86 Connecting GPS Devices with a USB Cable Before unplugging GPS devices from the USB port, always select [ Disconnect ] as shown in step 5. Follow the instructions di splayed to terminate the connection. The connection will not be terminated if you simp ly turn off the camera and GPS device. If you unplug GPS device while the connec tion is still ...
-
Canon WFT-E2 II - page 87
87 By attaching the Canon Bluetooth Unit BU-30 to the USB port, you can connect Bluetooth® GPS devices wirelessly . (Bluet ooth® devices other than GPS devices cannot be con nected). When using non-Canon Bluetooth units, confirm normal operation before use. T urn off the GPS device and camera before attaching the Bluetooth unit to the transmitter ...
-
Canon WFT-E2 II - page 88
88 Connecting GPS Devices via Bluetooth 5 Select [OK]. After the Bluetooth unit is attached to the transmitter , the transmitter’s < USB > lamp blinks in green and a message is displayed indicatin g that a connection has been established. When the co nfirmati on messa ge is displ ayed, s elect [ OK ]. X At this point, the menu option [ Disc ...
-
Canon WFT-E2 II - page 89
89 Connecting GPS Devices via Bluetooth 8 When the confirmation messag e is displayed, sele ct [OK]. The GPS connection status changes to [ Connecting ]. Pressing < 0 > under these conditions will enable y ou to disconnect the GPS device. 9 T ake the pict ure. Make sure the transmitter ’s < USB > lamp is lit in green before shooting. ...
-
Canon WFT-E2 II - page 90
90 Connecting GPS Devices via Bluetooth Before detaching Bluetooth units from the USB port, always select [ Disconnect ] as shown in step 5. Follow the instructions di splayed to terminate the connection. The connection with the Bluetooth unit will not be te rminated if you simp ly turn off the camera. If you detach a Bluetooth unit while the conne ...
-
Canon WFT-E2 II - page 91
91 Troubleshooting C OP Y ...
-
Canon WFT-E2 II - page 92
92 If transmitter errors are displayed on the came ra LCD monitor , refer to the examples of corrective actions in this section to eliminate the cause of the e rror . The error details can also be checked on the [ 7 ] tab [ WFT settin gs ] [ Error description ]. Click the error number in the following chart to jump to the corresponding page. Re ...
-
Canon WFT-E2 II - page 93
93 Responding to Error Messages Is the pairing sof tware running? X S tart the pairing sof tware and follow the inst ructions to re-establis h the connection. (p.44) Are the transmitter and wireless LAN te rminal configured with th e same encryption key for authentication ? X This error occurs if the en cryption keys do not match wh en the authenti ...
-
Canon WFT-E2 II - page 94
94 Responding to Erro r Messages What to check on t he transmitte r On the transmitter, the DNS address setting is [Auto assign] or [M anual setting]. Does the error occur under these s ettings? X If no DNS server is used, set the transmitter ’s DNS address setting to [ Disable ]. (p.25) On the transmitter , does the DNS server ’s IP address se ...
-
Canon WFT-E2 II - page 95
95 Responding to Error Messages What to check on t he transmitte r The transmitter ’s proxy server setting is [Enable]. Does t he error occur under this setting? X If no proxy server is used, set the transmitter ’s proxy server setting to [ Disable ]. (p.30) Do the transmitter ’s [Address setting] and [Port No.] settings match t hose of the p ...
-
Canon WFT-E2 II - page 96
96 Responding to Erro r Messages Is another device on the tran smitter network using the sa me IP address as the transmitter? X This error occurs if the transmitter is conne cted to a network where another device subsequently connects with the same IP addres s. Change the transmitter ’s IP address to avoid using the same address as another dev ic ...
-
Canon WFT-E2 II - page 97
97 Responding to Error Messages Has the USB cable been disco nnected? X After connecting the USB cable, in [ WFT settings ], se lect [ USB device connec. ] and reconnect the device. Is the USB device on? X T urn the USB device on. Next, also in [ WFT settings ], select [ USB device connec. ] and reconnect the device. Have you connected a USB device ...
-
Canon WFT-E2 II - page 98
98 Responding to Erro r Messages What to check on t he transmitte r On the transmitter , does the FTP server ’s IP address setting match the server ’s actual address? X Configure the IP address on the transmitter to ma tch the actual FTP server add ress. (p.30) Are the transmitter and wireless LAN te rminal configured with th e same encryption ...
-
Canon WFT-E2 II - page 99
99 Responding to Error Messages Are you connecting to th e FTP server via a broadband router? X Some broadband routers use a firewall to restr ict access to the FTP server . Chang e the firewall settings to allow access to the FTP server . X Y ou may be able to access the FT P server by setting [ Passive mode ] to [ Enable ] on the transmitter . (p ...
-
Canon WFT-E2 II - page 100
100 Responding to Erro r Messages What to check on t he transmitte r On the transmitter , is the [Login name] ent ered correctly? X Check the logon name for accessing the FT P se rver . The setting is case-sensitive, so check upper- and lower-case characters. Make sure the correct logon name is entered on the transmitter . (p.31) On the transmitter ...
-
Canon WFT-E2 II - page 101
101 Responding to Error Messages This error occurs if, for some reason , the transmitter fails to receive con firmation from the FTP server that image file transf er is complete. X Restart the FTP server and camera and send the images again. Is the Bluetooth unit too far from the GPS device? X Bring the GPS device closer to the Bluetooth unit. Are ...
-
Canon WFT-E2 II - page 102
102 Responding to Erro r Messages Are any obstacles blocking the line of sight between the t ransmitter and the antenna of the wireless LAN term inal? X Move the antenna to a position clearly visible from the point of view of the transmitter . (p.106) What to check on t he transmitte r On the transmitter , does the SSID setting match that of the wi ...
-
Canon WFT-E2 II - page 103
103 Responding to Error Messages Are the transmitter and wireless LAN t erminal configured for the same authentication method? X The transmitter supports these authentication methods: [ Open syst em ], [ Shared key ], [ WP A-PSK ], and [ WP A2-PSK ]. (p.21) X When using an AirPort for communica tion in infrastructure mode, [ Open system ] is not su ...
-
Canon WFT-E2 II - page 104
104 Responding to Erro r Messages Are the transmitter and wireless LAN te rminal configured with th e same encryption key for authentication ? X The setting is case-sensitive, so check upper- and lower-case characters. Make sure the correct encryption key for authentication is entered on t he transmitter and wireless LAN terminal. (p.22) Note that ...
-
Canon WFT-E2 II - page 105
105 Responding to Error Messages Are you following the correct pro cedure to establish the connection with slave cameras? X Operate slave cameras by following t he correct instructions (p.62, 63). Are the slave cameras too far f rom the master camera? X Bring the slave cameras closer to the master camera. Are you following the correct pro cedure to ...
-
Canon WFT-E2 II - page 106
106 When using the transmitter with a wireless LAN, try the follow ing corr ective actions if the transmission rate drops, the connection is lost, or other problems o ccur . When using the transmitter indoors, install the wireless LAN terminal in the same room where you are shooting. Install the wireless LAN terminal higher than the transmitter . I ...
-
Canon WFT-E2 II - page 107
107 Click the Windows [ Start ] button [ All Programs ] [ Accessories ] [ Command Prompt ]. T ype ipconfig/all and press the < Enter > key . The IP address assigned to the computer is disp layed, as well as the subnet mask, gateway , and DNS server information. T o avoid using the same I P address for the computer and othe r devic ...
-
Canon WFT-E2 II - page 108
108 C OP Y ...
-
Canon WFT-E2 II - page 109
109 Reference C OP Y ...
-
Canon WFT-E2 II - page 110
110 Follow these steps to create captions and r egister them on the camera, as introduced in “Adding a Caption Before Transfer” (p.35). When creating and registering captions, use a computer on which EOS Utility is installed. Before you begi n, attach the transmitter to the camera and use the USB ca ble provided with the camera to connect th e ...
-
Canon WFT-E2 II - page 111
111 Ty p e T ype: Image trans fer access ory that ca n be used i n wireless LANs and ov er Ethernet in wired LANs (IPsec -compatible). Can be connected via USB to externa l media, GPS d evices, an d Blueto oth unit s. Wireless LAN S tandards complianc e: IEEE 802 .1 1a ( WFT -E2 IIA/B/C) and A RIB STD-T71 IEEE 802.1 1b and ARIB STD-T66 IEEE ...
-
Canon WFT-E2 II - page 112
112 Specifications Image Capture Cap acity Approx. number of images * Usi ng a fully char ged LP-E4 * T esting bas ed on Camera & I maging Products Ass ociation (CI P A) standards * Fewe r images can b e captured when transferring images over wireless LAN. * Fewe r images can b e captured when using bus-powe red externa l media or GPS devic ...
-
Canon WFT-E2 II - page 113
113 C OP Y ...
-
Canon WFT-E2 II - page 114
114 C OP Y ...
-
Canon WFT-E2 II - page 115
115 C OP Y ...
-
Canon WFT-E2 II - page 116
116 Statement on EC directive Canon Inc. tímto prohlašuje, že tento CH9 -1161 je ve shod Č se základními po žadavky a dalšími p Ĝ íslušným i ustanoveními sm Č rnice 1999/5/ES. Undertegnede Canon Inc. erklærer he rved, at følgende udstyr CH9-1161 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Hiermit ...
-
Canon WFT-E2 II - page 117
117 FCC / IC Notice Model DS585802/DS585804 (i ncluding WLAN Module Model CH9-1 161) This device complies wi th Part 15 of FCC Rules and RSS-Gen of IC Rul es. Operation i s subject to the followi ng two conditions : (1) this device may not cause interf erence, and (2) thi s device must accept an y interference , including interfe rence that may ca ...
-
Canon WFT-E2 II - page 118
118 A Account ......................... ............................ 50 Ad hoc ...... ............................................. 8, 21 Area of use .................................................. 8 Authentication................ ...................... 21, 68 Auto power off ........................................... 17 B Batch transfer ....... ...
-
Canon WFT-E2 II - page 119
119 Index S Select folder .................. ............................ 31 Settings information....... ............................ 65 Shared key .................... ............................ 21 Simple control ............................................ 58 Slave camera ............................................ 62 SSID .................... ...
-
Canon WFT-E2 II - page 120
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan U.S.A. CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 1 1042-1 198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTRE ...
Do you have a question concerning Canon WFT-E2 II?
Use the form below
If you did not solve your problem by using a manual Canon WFT-E2 II, ask a question using the form below. If a user had a similar problem with Canon WFT-E2 II it is likely that he will want to share the way to solve it.