English dropdown-ico

Manual Milan Technology E-FL-HB-0400

8 pages 1 mb
Download

Go to site of 8

Summary
  • Milan Technology E-FL-HB-0400 - page 1

    Minneapolis, MN 55344 USA 10BASE-FL Ethernet ™ Unmanaged Fiber Hub with AUI, BNC or Fiber Uplink E-FL-HB-0800, E-FL-HB-0400 USER’S GUIDE The rack-mountable E-FL-HB-0800 and E-FL-HB-0400 series unmanaged Ethernet™ fiber hubs allow the network administrator to set up network workgroups connected over fiber and to install an OPTIONAL backbone up ...

  • Milan Technology E-FL-HB-0400 - page 2

    E-FL-HB-0x00 IN THE NETWORK Install one E-FL-HB-0x00 hub and use fiber cable to set up a workgroup by connecting the hub to terminal devices. Install an optional backbone uplink adaptor at the back of the hub and use 10BASE-2, 10BASE-5, or fiber cable to connect the workgroup to a network backbone. Cascade two repeater hubs by connecting fiber cabl ...

  • Milan Technology E-FL-HB-0400 - page 3

    E-FL-HB-0x00 in Half-Duplex Network The 5-4-3 Rule applies separately to each collision domain. NOTE: A collision domain is any Carrier Sense Multiple Access with Collision Detection (CSMA/CD) network in which a collision will occur if two attached stations transmit at the same time. A segment is the cable connection between two network interfaces. ...

  • Milan Technology E-FL-HB-0400 - page 4

    INST ALLA TION Optionally Install Backbone Uplink Adapter WARNING: Remove AC line cord from power source before installing backbone uplink adaptor in E-FL-HB-0x00. Failure to observe this warning could result in personal injury or death. CAUTION: Wear a grounding device and observe electrostatic discharge precautions when installing backbone uplink ...

  • Milan Technology E-FL-HB-0400 - page 5

    F AUL T ISOLA TION and CORRECTION If the E-FL-HB-0x00 fails, isolate and correct the fault by determining the answers to the following questions and then taking the indicated action: 1. Is the P(o)W(e)R LED on the E-FL-HB-0x00 illuminated? NO • Is the power cord properly installed in the E-FL-HB-0x00 and in the grounded AC outlet? • Does the gr ...

  • Milan Technology E-FL-HB-0400 - page 6

    Optionally Connect to Backplane THROUGH AUI UPLINK NOTE: Refer to 5-4-3 rule (page 3) to keep network configuration within acceptable bounds. USING TRANSCEIVER NOTE: Refer to transceiver documentation for detailed specifications and instructions. 1. Locate AUI uplink adapter installed at E-FL-HB-0x00 back. (See page 4.) 2. Locate IEEE 802.3 complia ...

  • Milan Technology E-FL-HB-0400 - page 7

    Power the E-FL-HB-0x00 NOTE: When the hub is connected to an AC outlet supplying 100-240VAC at 50-60 Hz, the hub automatically powers ON To power ON the E-FL-HB-0x00: 1. Locate power receptacle at back of E-FL-HB-0x00. 2. Plug unit end (female) of power cord into E-FL-HB-0x00 power receptacle. 3. Plug outlet end (male) of power cord into correct vo ...

  • Milan Technology E-FL-HB-0400 - page 8

    Optionally Connect to Backplane (continued) THROUGH FIBER UPLINK To connect fiber cable from E-FX-HB-xx00 10BASE-FL uplink adapter to network: 1. Locate 10BASE-FL uplink adapter installed at E-FL-HB-0x00 back. (See page 4.) 2. Locate or build 10BASE-FL compliant fiber cable with male two- stranded TX to RX connectors at both ends. (See page 14.) 3. ...

Manufacturer Milan Technology Category Switch

Documents that we receive from a manufacturer of a Milan Technology E-FL-HB-0400 can be divided into several groups. They are, among others:
- Milan Technology technical drawings
- E-FL-HB-0400 manuals
- Milan Technology product data sheets
- information booklets
- or energy labels Milan Technology E-FL-HB-0400
All of them are important, but the most important information from the point of view of use of the device are in the user manual Milan Technology E-FL-HB-0400.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Milan Technology E-FL-HB-0400, service manual, brief instructions and user manuals Milan Technology E-FL-HB-0400. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Milan Technology E-FL-HB-0400.

Similar manuals

A complete manual for the device Milan Technology E-FL-HB-0400, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Milan Technology E-FL-HB-0400 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Milan Technology E-FL-HB-0400.

A complete Milan Technology manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Milan Technology E-FL-HB-0400 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Milan Technology E-FL-HB-0400, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Milan Technology E-FL-HB-0400, that we can find in the current document
3. Tips how to use the basic functions of the device Milan Technology E-FL-HB-0400 - which should help us in our first steps of using Milan Technology E-FL-HB-0400
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Milan Technology E-FL-HB-0400
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Milan Technology E-FL-HB-0400 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Milan Technology E-FL-HB-0400?

Use the form below

If you did not solve your problem by using a manual Milan Technology E-FL-HB-0400, ask a question using the form below. If a user had a similar problem with Milan Technology E-FL-HB-0400 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)