English dropdown-ico

Manual Highpoint RocketRAID 3522

70 pages Not applicable
Download

Go to site of 70

Summary
  • Highpoint RocketRAID 3522 - page 1

    RocketRAID 3522 SA T AII Host Adapter User’s Guide Revision: 1.0 Date: January 2008 HighPoint T echnologies, Inc. ...

  • Highpoint RocketRAID 3522 - page 2

    Copyright Copyright © 2008 HighPoint T echnologies, Inc. This document contains materials protected by International Copyright Laws. All rights reserved. No part of this manual may be reproduced, transmitted or transcribed in any form and for any purpose without the express written permission of HighPoint T echnologies, Inc. T rademarks Companies ...

  • Highpoint RocketRAID 3522 - page 3

    T able of Contents I T able of Content Chapter 1 Introduction About this Guide ....................................................................................................... 1 - 1 Introducing the RocketRAID 3522 Host Adapter ...................................................... 1 - 1 RocketRAID 3522 – Features and Specifications ....... ...

  • Highpoint RocketRAID 3522 - page 4

    II Driver and Software CD ............................................................................................. 4 - 1 W indows Driver Installation ...................................................................................... 4 - 3 Chapter 5 RocketRAID 3522 W eb-RAID Management Interface 1 - W eb RAID Management Interface .......... ...

  • Highpoint RocketRAID 3522 - page 5

    Chapter 1 Introduction Contents of this Chapter: About this guide Introducing the RocketRAID 3522 Host Adapter RocketRAID 3522 Features and Specifications Understanding RAID Concepts and T erminology Network Features (W eb Management/BIOS Utilities) ...

  • Highpoint RocketRAID 3522 - page 6

    Introduction 1-1 About this Guide The RocketRAID 3522 SA T AII Host Adapter’s User’s Guide provides information about the functions and capabilities of the host adapter, and instructions for installing, configuring and maintaining RAID arrays hosted by the adapter. Introducing the RocketRAID 3522 Host Adapter The HighPoint RocketRAID 3522 is an ...

  • Highpoint RocketRAID 3522 - page 7

    Introduction 1-2 Onboard Cache and Optional Battery Backup for optimal performance and added security 256MB of DDR SDRAM with ECC protection is integrated into the RocketRAID 3522 for improved performance, and provides additional security in the case of critical system failure, when used in conjunction with the optional battery back up unit. Rocket ...

  • Highpoint RocketRAID 3522 - page 8

    Introduction 1-3 Array Monitors, Alerts and Indicators • SMTP for email notification • Alarm / Buzzer alerts for array activity • SAF-TE support • Ethernet Board for (OBM) Out of Band Management • NTP (Network Time Protocol) RAID Management • T erabyteSaver™ and T erabyteGuard™ for Data Protection and Reliability • Firmware update ...

  • Highpoint RocketRAID 3522 - page 9

    Introduction 1-4 Electrical Characteristics: Understanding RAID Concepts and T erminology The following concepts and terminology is commonly used when describing the functions of the RocketRAID 3522 Host Adapter . Disk initialization Initializing a disk writes necessary RAID configuration information to that disk. Disks must be initialized before c ...

  • Highpoint RocketRAID 3522 - page 10

    Online RAID Level Migration This term describes the ability to change one type of array (RAID level), into a different type of array (changing a RAID 1 array into a RAID 10 array for example). Data is still accessible during the migration process, and a base level of security is still active. OCE, ORLM and the RocketRAID 3522 The RocketRAID 3522 su ...

  • Highpoint RocketRAID 3522 - page 11

    Chapter 2 RocketRAID 3522 Hardware Description/Installation Contents of this Chapter: RocketRAID 3522 Hardware 1 - RocketRAID 3522 Adapter Layout 2 - Installing the RocketRAID 3522 Host Adapter 3 - V erifying Installation 4 - Battery Backup ...

  • Highpoint RocketRAID 3522 - page 12

    RocketRAID 3522 Hardware Description/Installation 2-1 RocketRAID 3522 Hardware 1 - RocketRAID 3522 Adapter Layout Port1, Port2 These represent the RocketRAID 3522’s two External Mini-SAS ports. Each port can support up to 4 hard disks. J1 - SAF-TE connector BEEP1 – Speaker Alarm (speaker): the speaker emits and audible alarm in the case of disk ...

  • Highpoint RocketRAID 3522 - page 13

    RocketRAID 3522 Hardware Description/Installation 2-2 2 - Installing the RocketRAID 3522 Host Adapter Note: Make sure the system is powered-off before installing the RocketRAID 3522 host adapter. The RocketRAID 3522 includes both standard and low-profile brackets. It may be necessary to attach the low-profile bracket in place of the standard bracke ...

  • Highpoint RocketRAID 3522 - page 14

    RocketRAID 3522 Hardware Description/Installation 2-3 3 - V erifying Installation Once the RocketRAID 3522 host adapter and hard disks have been installed into the disk enclosure, boot-up the system to verify that the hardware is properly recognized. 1 . Power on the system. If the system detects the presence of the adapter, the RocketRAID 3522 BIO ...

  • Highpoint RocketRAID 3522 - page 15

    RocketRAID 3522 Hardware Description/Installation 2-4 4 - Battery Backup A battery backup option will be available as an optional add-on component. The battery provides additional data security in case of a critical system failure. Data normally lost during a major system fault, such as a power outage or CPU failure, which was in transit at the tim ...

  • Highpoint RocketRAID 3522 - page 16

    Chapter 3 RocketRAID 3522 BIOS Utility Contents of this Chapter: RocketRAID 3522 BIOS Utility 1 - BIOS Command Overview 2 - Disk Menu 3 - Array Menu 4 - Controller Menu ...

  • Highpoint RocketRAID 3522 - page 17

    RocketRAID 3522 BIOS Uti lity 3-1 RocketRAID 3522 BIOS Utility The RocketRAID 3522’s BIOS Utility can be accessed using the “Ctrl+H” command. This command should be displayed automatically when the RocketRAID 3522’s BIOS screen appears during the system’s boot up procedure. 1 - BIOS Command Overview The RocketRAID 3522 BIOS Utility provid ...

  • Highpoint RocketRAID 3522 - page 18

    RocketRAID 3522 BIOS Utility Press [AL T + S] to open the “System” menu in the figure 1; then select “Supervisor mode”, and press ENTER. This will open the user authentication interface. Enter the appropriate password and then press ENTER. The initial password is “hpt”. 2 - Disk Menu Press [AL T + D] to access the “Disk” menu. V iew ...

  • Highpoint RocketRAID 3522 - page 19

    RocketRAID 3522 BIOS Uti lity 3-3 Note: If the selected disk has already been initialized, the BIOS utility will display a warning message, but will continue to initialize the remaining disks. W arning : Initializing a disk may result in data loss – do not initialize disks that contain critical data. Non-initialized disks can still be utilized as ...

  • Highpoint RocketRAID 3522 - page 20

    RocketRAID 3522 BIOS Utility Note: V ariable Sector Size (VSS) for over 2TB support in 32bit LBA OS. It changes the sector size from default 512 Bytes to 4k Bytes etc. the maximum volume capacity up to 16TB. This option works under W indows platform only . And it CANNOT be converted to Dynamic Disk, because 4k sector size is not a standard format. ...

  • Highpoint RocketRAID 3522 - page 21

    RocketRAID 3522 BIOS Uti lity 3-5 Start T ask – select this option to schedule specific RAID maintenance tasks such as RAID V erification. Stop T ask – use this option to terminate scheduled tasks. Set boot - use this option to set an array to act as a boot volume. Note: This setting is dependent on the motherboard’s BIOS configuration. An ar ...

  • Highpoint RocketRAID 3522 - page 22

    RocketRAID 3522 BIOS Utility Network Setting Use this menu to configure the RocketRAID card’s network settings. Access the Controller menu, select “Network” and press ENTER. Y ou can select “Use automatic config” to request the network information from the system, or configure the settings manually. 3-6 ...

  • Highpoint RocketRAID 3522 - page 23

    Chapter 4 RocketRAID 3522 Driver and Software Installation Microsoft Windows (2000, XP , 2003 Server , V ista) Contents of this Chapter: Driver and Software CD W indows Driver Installation ...

  • Highpoint RocketRAID 3522 - page 24

    RocketRAID 3522 Driver and Software Installation Driver and Software CD The RocketRAID 3522 retail box includes a Driver and Software CD. This CD can be used to generate driver diskettes, and install the RAID Management software for a variety of operating systems. T o create a driver diskette: 1 . Insert the CD into the system’s CD/DVD drive. The ...

  • Highpoint RocketRAID 3522 - page 25

    RocketRAID 3522 Driver and Software Installation 4-2 5 . Click on the “Please Select the Diskette you want to create” drop-down button, and select the appropriate OS from the list. 6 . Click on the “OK” button to create the driver diskette. T o install the RAID software: 1 . Click on “Install RAID Management Software”. 2 . Select the de ...

  • Highpoint RocketRAID 3522 - page 26

    RocketRAID 3522 Driver and Software Installation 4-3 Windows Driver Installation Before installing the RocketRAID 3522 device driver, make sure the RocketRAID 3522 host adapter and all required hard disks have been installed into the system’s chassis (refer to the Hardware Installation section, pages 2-2, 2-3). Installing the RocketRAID 3522 driv ...

  • Highpoint RocketRAID 3522 - page 27

    RocketRAID 3522 Driver and Software Installation 4-4 Installing the RocketRAID 3522 driver during a fresh Windows 2000/XP/2003/x64 installation 1 . After booting from the W indows 2000/XP/2003 CD-ROM, when the W indows Setup blue screen appears, look towards the bottom of the screen. W indows will prompt you to press the F6 key if you want to insta ...

  • Highpoint RocketRAID 3522 - page 28

    4-5 RocketRAID 3522 Driver and Software Installation 5 . When asked: “W ould you like to install this driver software?”, select “Install”. 6 . Reboot the system when prompted. The RocketRAID 3522 will be available for use after V ista reboots. Installation V erification After the driver has been installed, and the system has been restarted: ...

  • Highpoint RocketRAID 3522 - page 29

    Chapter 5 RocketRAID 3522 W eb RAID Management Interface Contents of this Chapter: 1 - W eb RAID Management Interface 2 - Preparing Hard disks 3 - Array Management 4 - Device Management 5 - Configuring Spare Disks 6 - Managing Events and T asks 7 - Settings ...

  • Highpoint RocketRAID 3522 - page 30

    W eb RAID Management Interface 5-1 1 W eb RAID Management Interface There are two methods to access the RocketRAID 3522’s web-based RAID management interface: Use HighPoint In-band Management Service or use the adapter’s Ethernet port (out-of-band management). The W eb RAID Management interface is a firmware-based utility . If you are using the ...

  • Highpoint RocketRAID 3522 - page 31

    W eb RAID Management Interface The in-band management software provides an access URL for each controller on the system. Y ou can access the RAID management interface for each controller through its access URL. Then Select the controller’s Access URL by click the link http://127.0.0.1:7412 Y ou will be asked for the User and Password to login. Th ...

  • Highpoint RocketRAID 3522 - page 32

    W eb RAID Management Interface 5-3 3) Checkmark each disk you wish to initialize, and click the Submit button. W arning: initializing disks may delete data stor ed on the selected disks. Legacy Disks Disks that already contain data or have been partitioned will be recognized as “Legacy Disks”. Arrays cannot be created from Legacy Disks. These d ...

  • Highpoint RocketRAID 3522 - page 33

    W e b RAID M anageme nt Inte rface 5-4 5 . If you are creating a redundant RAID array (RAID1, 5, 6, 10, 50), select an initialization option for the array. Note: An un-initialized RAID1 or RAID10 array can still provide redundancy in case of a disk failure. A RAID5 array, however, is not fault-tolerant until initializa- tion is finished. 6 . Specif ...

  • Highpoint RocketRAID 3522 - page 34

    W eb RAID Management Interface 5-5 3 ) Click the Delete button. Note: An array in use by the operating system cannot be deleted. Any data stored on a deleted array will be inaccessible Array Maintenance – Rebuilding/V erifying/Modifying RAID arrays Rebuilding a Failed Array When an array member in a redundant array fails, the array will be listed ...

  • Highpoint RocketRAID 3522 - page 35

    W e b RAID M anageme nt Inte rface 5-6 2 ) Highlight the desired RAID array 3 ) Click the “ Maintenance ” button. Click the V erify button to start the verify process. OCE/ORLM – modifying existing RAID arrays Expanding/Migrating an Array W ith the OCE/ORLM function, you can migrate an array from one RAID level to another RAID level and/or ex ...

  • Highpoint RocketRAID 3522 - page 36

    W eb RAID Management Interface 5-7 An unexpected system crash may result in data loss while performing OCE/ORLM on an array . W e strongly recommend backing up data before starting the OCE/ORLM process. After the OCE/ORLM procedure has completed, reboot the system. Other RAID related Functions Renaming an Array Y ou are free to rename RAID arrays. ...

  • Highpoint RocketRAID 3522 - page 37

    W e b RAID M anageme nt Inte rface 5-8 4 Device Management Select the “ Manage - Device ” function to access the device management page. Change Device Settings Depending upon the capabilities RAID controller and hard disks drives in use, several configurable device settings may be available: Read Ahead, W rite Cache, TCQ, and NCQ. Each feature ...

  • Highpoint RocketRAID 3522 - page 38

    W eb RAID Management Interface 5-9 User can also use the W eb RAID management to upgrade controller’s firmware. SHI – Storage Health Inspector The primary SHI interface displays a brief “health” summary of each hard disk. Controller ID Which controller /card the disk is attached to. Port # Port location of the hard disk ...

  • Highpoint RocketRAID 3522 - page 39

    W e b RAID M anageme nt Inte rface 5-10 Device SSN# Serial number of the hard disk RAID RAID/Non-RAID status F T emperature (in Fahrenheit) of the hard disk (Celsius is displayed under the SMAR T status) Bad Sectors/Found & Repaired The card is capable of repairing bad sectors – a summary of this activity is presented here. Device Status OK m ...

  • Highpoint RocketRAID 3522 - page 40

    W eb RAID Management Interface 5-11 Note: S.M.A.R.T attribute data is drive-specific. The software includes a list of definitions for popular drive models/manufacturers. Unknown S.M.A.R.T. attributes will be shown as “unknown”. Y ou can add the attribute definitions for your drive in the file smart.def (which resides in the software installatio ...

  • Highpoint RocketRAID 3522 - page 41

    W e b RAID M anageme nt Inte rface 5-12 T o rescan the devices: 1 ) Select menu “ Manage - Device ”. 2 ) Click “ Rescan Devices ” button. Note: When you are hot-plugging an entire array, run rescan only after all array members (hard disks) have been physically plugged or unplugged from the system. Y ou can r escan all the devices at once us ...

  • Highpoint RocketRAID 3522 - page 42

    W eb RAID Management Interface 5-13 6 Managing Events and T asks The HighPoint W eb RAID Management Software automatically logs all controller related events that have occurred (for all controllers/cards managed by the software). In addition you can configure E-mail Notification to receive information about these events (see Section 7 Settings -V i ...

  • Highpoint RocketRAID 3522 - page 43

    W e b RAID M anageme nt Inte rface 5-14 Scheduling a T ask T o add a task schedule: 1 ) Select the array that you want to verify or rebuild. 2 ) Enter a name for the task. 3 ) Configure the frequency for the task. 4 ) Check the Submit button. Delete a Scheduled T ask T o delete a task schedule: 1 ) Select a task from the T asks List. 2 ) Click the ...

  • Highpoint RocketRAID 3522 - page 44

    W eb RAID Management Interface 5-15 Settings>System The System Setting page include SAF-TE config file setting, Audible Alarm setting, Staggered Spinup setting, Spindown Idle Disk setting, Rebuild priority setting and Auto Rebuild setting. The Upload SAF-TE config file option allow user to upload the special SAF-TE config files. Settings>Netw ...

  • Highpoint RocketRAID 3522 - page 45

    W e b RAID M anageme nt Inte rface 5-16 Settings>User This setting allows you to alter the default password (when logging on). Enter a new password and click the “Change Password” button to change the current user’s password. Settings>Email Enabling E-mail notification: T o configure E-mail notification: 1 ) Select the “ Enable Event ...

  • Highpoint RocketRAID 3522 - page 46

    T o test E-mail notification: 1 ) Enter the necessary information for the recipient. 2 ) Click the T est button. If the software is unable to send a test message, an error will be displayed. Double check the recipient entries and make sure the information is correct. Settings>SNMP Y ou can set three SNMP T rap IP address and trap type, this sett ...

  • Highpoint RocketRAID 3522 - page 47

    Chapter 6 Linux Driver Support Contents of this Chapter: Fedora 7 Linux installation Overview Red Hat Enterprise 5 Overview SuSE Linux Enterprise Server (SLES) installation Overview ...

  • Highpoint RocketRAID 3522 - page 48

    Linux Driver Support 6-1 1 - Fedora 7 Linux installation Overview This section provides instructions describing how to install and utilize the RocketRAID host adapter on a Fedora 7 Linux system. 2 - Installing Fedora 7 on the RocketRAID 3522 Host Adapter Note: If the OS is running kernel that differs from the one supported by the precompiled driver ...

  • Highpoint RocketRAID 3522 - page 49

    Linux Drive r Support 6-2 3 - Installing the RocketRAID 3522 driver for an Exist- ing System Note: If a SCSI adapter is used to boot the system, make sure the RocketRAID host adapter BIOS loads/posts after the SCSI adapter’s BIOS. It may be necessary to move the adapter(s) to another PCI slot. Step 1 Obtain the Driver Module Extract the module fi ...

  • Highpoint RocketRAID 3522 - page 50

    Linux Driver Support 6-3 Then, instruct the system to load the module when booting. Use the following commands: #echo “modprobe hptiop” > /etc/init.d/hptdriver #chmod 755 /etc/init.d/hptdriver #ln –sf /etc/init.d/hptdriver /etc/rc.d/rc3.d/S01hptdriver #ln –sf /etc/init.d/hptdriver /etc/rc.d/rc4.d/S01hptdriver #ln –sf /etc/init.d/hptdri ...

  • Highpoint RocketRAID 3522 - page 51

    Linux Drive r Support 6-4 1 - Red Hat Enterprise 5 Installation Overview This section provides instructions describing how to install and utilize the RocketRAID host adapter on a Red Hat Enterprise 3 Linux system. 2 - Installing Red Hat Enterprise 5 (AS, ES, WS) Linux on the RocketRAID 3522 controller T o install Red Hat Enterprise Linux onto disks ...

  • Highpoint RocketRAID 3522 - page 52

    Linux Driver Support 6-5 Note: 1. The system device mapping order is the same as the order shown in RocketRAID BIOS Setting Utility. If no other SCSI adapters are installed, the device marked as “BOOT” or “HDD0”will identified as /dev/sda , “HDD1” as /dev/sdb , “HDD2” as /dev/sdc , etc. When creating mount points, /boot must be moun ...

  • Highpoint RocketRAID 3522 - page 53

    Linux Drive r Support 6-6 Step 3 Configure System to Automatically Load the Driver T o avoid typing in “insmod hptiop.ko” each time the operating system is booted, the system must be instructed to automatically load the module during bootup. T o install the module, type in the following commands (first change to the directory where the proper h ...

  • Highpoint RocketRAID 3522 - page 54

    Linux Driver Support 6-7 Example: # gzip -dc /boot/initrd-xxx.img > /tmp/initrd.ext2 # mkdir /mnt/initrd # mount -o loop /tmp/initrd.ext2 /mnt/initrd # cp /tmp/hptiop.ko /mnt/initrd/lib/hptiop_00.ko # umount /mnt/initrd # gzip -c /tmp/initrd.ext2 > /boot/initrd-xxx.img If you are using lilo to boot the system, use “lilo” to reinstall the ...

  • Highpoint RocketRAID 3522 - page 55

    Linux Drive r Support 6-8 1 - SuSE Linux Enterprise Server (SLES) installation Overview This section provides instructions describing how to install and utilize the RocketRAID host adapter on a SuSE (SLES) Linux system. 2 - Installing SLES Linux on the RocketRAID 3522 Host Adapter Note: If the OS is running kernel that differs from the one supporte ...

  • Highpoint RocketRAID 3522 - page 56

    Linux Driver Support 6-9 Additional Installation Notes: The system device mapping order is the same as the order shown in RocketRAID host adapter’s BIOS Setting Utility. If no other SCSI adapters are installed, the device marked as “BOOT” or “HDD0” will be identified as /dev/sda , “HDD1” as /dev/sdb , “HDD2” as /dev/sdc , etc. Whe ...

  • Highpoint RocketRAID 3522 - page 57

    Linux Drive r Support 6-10 # mount /dev/fd0 /mnt/floppy # cd / # tar xfz /mnt/floppy/linux/suse/i386-sles9/install/update.tar.gz The driver modules will be extracted to the directory /lib/modules/[kernel-ver]/kernel/ drivers/scsi/ . After you have extracted the driver module, you can load it by following commands: # modprobe sd_mod # insmod hptiop. ...

  • Highpoint RocketRAID 3522 - page 58

    6-11 2. Run the “depmod” command to update the module configuration: # depmod 3. Next, run the “mkinitrd” command to update the initrd file: # mkinitrd 4. If you are using the lilo boot loader, run lilo again: # lilo Step 5 Configure System to Mount V olumes during Startup The system can be instructed to automatically mount the array(s) dur ...

  • Highpoint RocketRAID 3522 - page 59

    Chapter 7 FreeBSD Driver Support Contents of this Chapter: 1 - Installing FreeBSD on the RocketRAID 3522 Controller 2 - Installing the RocketRAID 3522 Driver on an Existing System 3 - Updating the Driver 4 - Uninstalling the Driver ...

  • Highpoint RocketRAID 3522 - page 60

    FreeBSD Driver Support 7-1 1 - Installing FreeBSD on the RocketRAID 3522 Con- troller If you would like to install FreeBSD onto arrays attached to the RocketRAID host adapter, please follow the steps below. Step 1 Prepare the Driver Diskette When installing FreeBSD to a disk or array attached to the RocketRAID host adapter, you must prepare a drive ...

  • Highpoint RocketRAID 3522 - page 61

    FreeBSD Driver Support 7-2 Booting [kernel] in 9 seconds… <-press SPACE key A prompted label “ ok ” will appear at the bottom of the screen 4 . Insert the RocketRAID driver diskette into floppy drive. T ype in “ load diskx: hptiop-x.x ” (without quotation marks), and then press enter . for FreeBSD 4.3-RELEASE ok load kernel ok load dis ...

  • Highpoint RocketRAID 3522 - page 62

    FreeBSD Driver Support 7-3 for FreeBSD 5.1-RELEASE ok load disk0:hptiop-5.1.ko for FreeBSD 5.2.1-RELEASE ok load disk0:hptiop-5.2.1.ko for FreeBSD 5.3-RELEASE ok load disk0:hptiop-5.3.ko for FreeBSD 5.4-RELEASE ok load disk0:hptiop-5.4.ko for FreeBSD 5.3-AMD64-RELEASE o k load disk0:hptiop-5.3-amd64.ko for FreeBSD 5.4-AMD64-RELEASE o k load disk0:h ...

  • Highpoint RocketRAID 3522 - page 63

    FreeBSD Driver Support 7-4 7 . Before exiting installation, an additional step must be taken to copy the RocketRAID driver module to the system. On the driver diskette, there is a setup script labeled “ postinstall ”, which will complete this task. Before rebooting the system, press Alt-F4 to enter the command shell, and type the following comm ...

  • Highpoint RocketRAID 3522 - page 64

    FreeBSD Driver Support 7-5 For FreeBSD 5.x: # mdconfig –a –t vnode –f freebsd_5.x.img –u 0 # mount /dev/md0 /mnt # cp /mnt/hptiop-xxx.ko /boot/kernel/hptiop.ko # umount /mnt # mdconfig –d –u md0 Step 2 T est the Driver Module T est the driver module to ensure that it works with the system, by loading it during bootup. If the module has ...

  • Highpoint RocketRAID 3522 - page 65

    FreeBSD Driver Support 7-6 Note: If you have configured a RAID 10 using 4 disks, it will be registered to system as device /dev/da0 . Y ou can use “ /stand/sysinstall ” to cr eate partitions and disklabels (like da0s1e) on da0 . Then, create a new filesystem using “ newfs /dev/ da0s1e ”. Now you can mount /dev/da0s1e to somewhere to access ...

  • Highpoint RocketRAID 3522 - page 66

    Chapter 8 Mac OSX Driver Contents of this Chapter: Installing the driver and RAID utility ...

  • Highpoint RocketRAID 3522 - page 67

    Mac OSX Driver 1 Installing the driver and RAID utility Installing the package 1) Double click the package labeled “ rr3xxx_4xxx-MacOSX-universal-vxxx.dmg ” to start the installation process (“xxx” refers to the revision of the driver) . This will open the driver and software packag. 2) Double click the “rr3xxx_4xxx-MacOSX-universal-vxxx. ...

  • Highpoint RocketRAID 3522 - page 68

    Appendix Customer Support ...

  • Highpoint RocketRAID 3522 - page 69

    Customer Support If you encounter any problems while utilizing the RocketRAID 3522, or have any questions about this or any other HighPoint product, feel free to contact our Customer Support Department. T roubleshooting Checklist Before contacting our Customer Support department: Make sure the latest BIOS, driver and RAID Software have been install ...

  • Highpoint RocketRAID 3522 - page 70

    FCC Part 15 Class B Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and ca ...

Manufacturer Highpoint Category Controller

Documents that we receive from a manufacturer of a Highpoint RocketRAID 3522 can be divided into several groups. They are, among others:
- Highpoint technical drawings
- RocketRAID 3522 manuals
- Highpoint product data sheets
- information booklets
- or energy labels Highpoint RocketRAID 3522
All of them are important, but the most important information from the point of view of use of the device are in the user manual Highpoint RocketRAID 3522.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Highpoint RocketRAID 3522, service manual, brief instructions and user manuals Highpoint RocketRAID 3522. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Highpoint RocketRAID 3522.

Similar manuals

A complete manual for the device Highpoint RocketRAID 3522, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Highpoint RocketRAID 3522 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Highpoint RocketRAID 3522.

A complete Highpoint manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Highpoint RocketRAID 3522 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Highpoint RocketRAID 3522, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Highpoint RocketRAID 3522, that we can find in the current document
3. Tips how to use the basic functions of the device Highpoint RocketRAID 3522 - which should help us in our first steps of using Highpoint RocketRAID 3522
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Highpoint RocketRAID 3522
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Highpoint RocketRAID 3522 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Highpoint RocketRAID 3522?

Use the form below

If you did not solve your problem by using a manual Highpoint RocketRAID 3522, ask a question using the form below. If a user had a similar problem with Highpoint RocketRAID 3522 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)