Manual Harmar Mobility AL001

10 pages 0.92 mb
Download

Go to site of 10

Summary
  • Harmar Mobility AL001 - page 1

    your AL001 ...

  • Harmar Mobility AL001 - page 2

    AL001 Users Manual Harmar Mobility Rev .1 June 2008 Please r ead the manual befor e using . WARNING! A" warning" indicates" a" potentially" dangerous situation," which" if" not" avoided," could" result" in" death or" serious" injury . 1. Read all instructions and save them f ...

  • Harmar Mobility AL001 - page 3

    9. Do not put the product on any kinds of trailers. 10. Carrying capacity is limited to 500 lbs. max. Assembly Instructions Tools Need:  5/8” wrench  1/2” wrench  3/4” wrench  9/16” wrench  Phillips screwdriver Step.1 Insert the hitch into the carrier rack. See the figure Step.2 Insert four 3/8”x7/8” bolts on the bottom o ...

  • Harmar Mobility AL001 - page 4

    Step.3 Screw spring pull pin into carrier. Add reflectors. See the figure. Step.4 Screw spring pull pin into jam nut. Screw spring pull pin into ramp bracket. Bolt bracket to frame. Secure with nuts and lock washers. See the figure. NOTE! To prevent loosening of the spring pull pin, torque the jam nut tightly against the ramp bracket. When in use: ...

  • Harmar Mobility AL001 - page 5

    Insert the spring pull pin into the hole on the ramp when you stand the ramp. See the figure. ATTENTION! For the first installation of the anti-tilt lock bracket insert the carrier into the hitch receiver. Do not insert the hitch pin at this point. Now slide the carrier toward the vehicle until it holds the anti- tilt lock bracket while an addition ...

  • Harmar Mobility AL001 - page 6

    Next loosen the bolts on the anti-tilt lock bracket. (There should be grooves where the bolts were tightened against the hitch receiver) This procedure is required only during the initial installation of the anti-tilt lock bracket as fo r t he grooves will ensure repeated reloc ating of t he anti-ti lt lock b racket. Now pull the carrier o ut to it ...

  • Harmar Mobility AL001 - page 7

    ATTENTION: Large chain loops on trailer hitches will not accept the anti-tilt locking device. In this case you will be unable to use the supplied anti-tilt locking devise. ...

  • Harmar Mobility AL001 - page 8

    Assembly ...

  • Harmar Mobility AL001 - page 9

    Parts List Index Description Quantity 1 ramp 1 2 ramp bolt sets 2 3 Carriage bolt sets 2 4 Ramp bracket 1 5 Spring pull pin 2 6 reflector 2 7 carrier tray 1 8 gear 1 9 hitch pin 1 10 M12x70 bolt 1 11 adjust bolt 1 12 M10x30 bolt 3 13 anti tilt lock bracket 1 14 lock bolt 4 ...

  • Harmar Mobility AL001 - page 10

    YOU MUST HAND W ASH OR USE A TOUCHLESS AUTOMA TIC CAR W ASH TO PREVENT LIFT DAMAGE. IF YOU HA VE ANY QUESTIONS REGARDING W ASHING A CAR EQUIPPED WITH A HARMAR LIFT PLEASE CALL THE HARMAR TECHNINCAL SER VICES DEP AR TMENT ...

Manufacturer Harmar Mobility Category Automobile Accessories

Documents that we receive from a manufacturer of a Harmar Mobility AL001 can be divided into several groups. They are, among others:
- Harmar Mobility technical drawings
- AL001 manuals
- Harmar Mobility product data sheets
- information booklets
- or energy labels Harmar Mobility AL001
All of them are important, but the most important information from the point of view of use of the device are in the user manual Harmar Mobility AL001.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Harmar Mobility AL001, service manual, brief instructions and user manuals Harmar Mobility AL001. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Harmar Mobility AL001.

A complete manual for the device Harmar Mobility AL001, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Harmar Mobility AL001 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Harmar Mobility AL001.

A complete Harmar Mobility manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Harmar Mobility AL001 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Harmar Mobility AL001, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Harmar Mobility AL001, that we can find in the current document
3. Tips how to use the basic functions of the device Harmar Mobility AL001 - which should help us in our first steps of using Harmar Mobility AL001
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Harmar Mobility AL001
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Harmar Mobility AL001 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Harmar Mobility AL001?

Use the form below

If you did not solve your problem by using a manual Harmar Mobility AL001, ask a question using the form below. If a user had a similar problem with Harmar Mobility AL001 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (1)

miguel

Buenas tardes, queria saber si este modelo permite conectar unos cascos bluetooth o solo es receptor de bluetooth, en lugar de emisor y receptor