English dropdown-ico

Manual Audiovox Prestige 128-7853

16 pages 0.37 mb
Download

Go to site of 16

Summary
  • Audiovox Prestige 128-7853 - page 1

    128-7853 1 of 16 1 Model APS-920 Inst allation Manual This Remote St art/Alarm System is designed to be used with Automatic T ransmission- Fuel Injection V ehicles Only! COMPONENTS: Control Module 1 Four Button RF T ransmitter 1 Four Button LCD T ransmitter 2 Way Antenna/Receiver 1 “1 X 1.75” Foam Pad 6 Pin Main Power Harness w/Fuses 20 Pin Acc ...

  • Audiovox Prestige 128-7853 - page 2

    128-7853 2 of 16 2 INST ALLA TION OF THE MAJOR COMPONENTS: CONTROL MODULE: Select a mounting location inside the passenger compartment (up behind the dashboard). The mounting location selected must be within 24" of the ignition switch wiring harness to allow con- nection of the 6 pin main wiring harness. Be certain that the chosen location wil ...

  • Audiovox Prestige 128-7853 - page 3

    128-7853 3 of 16 3 SIREN: Select a location in the engine compartment that is not accessible from below the vehicle. The selected location must be clear of hot or moving parts within the engine compartment The siren must be pointed downward to prevent water retention and the flared end must be pointed away from and out of the engine compartment for ...

  • Audiovox Prestige 128-7853 - page 4

    128-7853 4 of 16 4 DO NOT PLUG THE SIX PIN MAIN POWER HARNESS OR THE MUL TI PIN INPUT / OUTPUT HARNESS INTO THE CONTROL MODULE UNTIL ALL CONNECTIONS TO THE VEHICLE HA VE BEEN MADE. AFTER SELECTING YOUR T ARGET WIRES AS DEFINED BELOW , DISCON- NECT THE NEGA TIVE BA TTERY CABLE FROM THE VEHICLE BA TTERY PRIOR T O MAKING ANY CONNECTIONS. Note: Do not ...

  • Audiovox Prestige 128-7853 - page 5

    128-7853 5 of 16 5 BLUE Wire: Ignition 1 Output Connect this wire to the ignition 1 wire from the ignition switch. This wire will show +12 volts when the ignition key is turned to the "ON" or "RUN" and the "ST ART" or CRANK" positions, and will have 0 volts when the key is turned to the "OFF" and "A ...

  • Audiovox Prestige 128-7853 - page 6

    128-7853 6 of 16 6 false triggering of the factory alarm when the remote start unit engages or when the transmitter is used to unlock the doors. NOTE: This output can be selected to operate like the door lock output as set in alarm feature setting #1 by selecting feature #13 of Bank 3 to as door unlock pulse. Black w/ Light Green T race Wire: Pulse ...

  • Audiovox Prestige 128-7853 - page 7

    128-7853 7 of 16 7 Orange: Ground While Armed Output This wire provides a 300 mA ground output when the alarm circuit is armed to control the starter inhibit relay . Connect the Orange wire to terminal #86 (orange wire) of the relay provided. Connect terminal #85 (red wire) of the relay to an ignition wire in the vehicle that is +12 volts when the ...

  • Audiovox Prestige 128-7853 - page 8

    128-7853 8 of 16 8 Brown Wire: Negative Door Trigger If the vehicle's door courtesy light switches ground when the door is opened, (Most GMs and Imports), you must connect this wire to the negative output from one of the vehicle's door pin switches. In most cases the Brown wire will need to be connected to only one door switch no matter h ...

  • Audiovox Prestige 128-7853 - page 9

    128-7853 9 of 16 9 Green/Y ellow Wire: DIESEL W AIT T O ST ART INPUT The green/yellow wire, when connected to the wire that get + 12 volts during the glow plug preheat stage will delay the starter output until this wire drops the 12 volts. In other words, in a Diesel vehicle with glow plug preheat circuit, when the ignition is turned on, the vehicl ...

  • Audiovox Prestige 128-7853 - page 10

    128-7853 10 of 16 10 The Light Blue wire can be used to accommodate the following situations: A. Shock Sensor By Pass: B. Additional Ignition Output: C. GM V A TS Key Override: Green w/ Black T race Wire: 250 mA Latched Channel 4 Output The Green w/ Black Trace wire supplies a 300 mA switched output whenever channel four of the receiver is accessed ...

  • Audiovox Prestige 128-7853 - page 11

    128-7853 11 of 16 11 4 Pin Shock Sensor Connector “D” Red, Black Green & Blue wires of the shock sensor harness provide +12 V olts, Ground, Full T rigger , and Pre-Detect inputs to and from the sensor . Route these wires from the previously installed sensor and connect to the mating connector on the control module. 2 Pin LED Harness, Connec ...

  • Audiovox Prestige 128-7853 - page 12

    128-7853 12 of 16 12 ...

  • Audiovox Prestige 128-7853 - page 13

    128-7853 13 of 16 13 Setting Up The System Programming Features: Bank 1 Transmitter Channels S tart with the system disarmed, tun the ignition switch to the on position then: 1) Press and release the push button valet/program switch 3 times. Siren Chirps once and or Lights flash one time indicating the transmitter program mode successfully entered. ...

  • Audiovox Prestige 128-7853 - page 14

    128-7853 14 of 16 14 Programming T ach Rate: NOTE: All applications require that tach be programmed. The unit will not operate unless tach is programmed. If an attempt is made to start the vehicle via the remote start without first programming tach, the unit will flash the parking lights 7 times indicating tach has not been learned and stored. If t ...

  • Audiovox Prestige 128-7853 - page 15

    128-7853 15 of 16 15 3. Within 10 seconds of the key turning off, cycle the enable switch Off, On, Off, On ( 2 times) to select a 2 hour timed start interval. Cycle the enable switch Off, On, Off, On, Off, On, Off, On (4 times) to select a 4 hour timed start interval. The lights will flash and the siren will chirp 2X or 4X dependant upon 2 or 4 hou ...

  • Audiovox Prestige 128-7853 - page 16

    128-7853 16 of 16 16 © 2006 Audiovox Electronics Corporation 150 Marcus Blvd. Hauppauge N.Y . 1 1788 128-7853 ...

Manufacturer Audiovox Category Remote Starter

Documents that we receive from a manufacturer of a Audiovox Prestige 128-7853 can be divided into several groups. They are, among others:
- Audiovox technical drawings
- Prestige 128-7853 manuals
- Audiovox product data sheets
- information booklets
- or energy labels Audiovox Prestige 128-7853
All of them are important, but the most important information from the point of view of use of the device are in the user manual Audiovox Prestige 128-7853.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Audiovox Prestige 128-7853, service manual, brief instructions and user manuals Audiovox Prestige 128-7853. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Audiovox Prestige 128-7853.

Similar manuals

A complete manual for the device Audiovox Prestige 128-7853, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Audiovox Prestige 128-7853 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Audiovox Prestige 128-7853.

A complete Audiovox manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Audiovox Prestige 128-7853 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Audiovox Prestige 128-7853, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Audiovox Prestige 128-7853, that we can find in the current document
3. Tips how to use the basic functions of the device Audiovox Prestige 128-7853 - which should help us in our first steps of using Audiovox Prestige 128-7853
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Audiovox Prestige 128-7853
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Audiovox Prestige 128-7853 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Audiovox Prestige 128-7853?

Use the form below

If you did not solve your problem by using a manual Audiovox Prestige 128-7853, ask a question using the form below. If a user had a similar problem with Audiovox Prestige 128-7853 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)