English dropdown-ico

Manual Vector DA-250DH CU

20 pages 0.77 mb
Download

Go to site of 20

Summary
  • Vector DA-250DH CU - page 1

    DUAL POWER AMPLIFIERS DA-250D CU DA-250DH CU Thank you for purchasing TOA's Dual Power Amplifier. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. Note: The figure shows the DA-250D. OPERA TING INSTRUCTIONS ...

  • Vector DA-250DH CU - page 2

    2 T ABLE OF CONTENTS 1. IMPORT ANT SAFETY INSTRUCTIONS .................................................... 3 2. SAFETY PRECAUTIONS ............................................................................... 4 3. GENERAL DESCRIPTION ............................................................................. 6 4. FEA TURES .................... ...

  • Vector DA-250DH CU - page 3

    3 1. IMPORT ANT SAFETY INSTRUCTIONS • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. • Do not install near ...

  • Vector DA-250DH CU - page 4

    4 When Installing the Unit • Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may result in fire or electric shock. • Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result in fire or electric shock. • Do not cut, ...

  • Vector DA-250DH CU - page 5

    5 • When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the power cord connected to the outlet may cause damage to the power cord, resulting in fire or electric shock. When removing the power cord, be sure to hold its plug to pull. • Avoid installing the unit in humid or dusty locations, in l ...

  • Vector DA-250DH CU - page 6

    6 3. GENERAL DESCRIPTION TOA's DA-250D and DA-250DH Dual Power Amplifiers feature high power handling capabilities and durability. The DA-250D is configured with 250 W x 2 channels (4 Ω output) and 170 W x 2 channels (8 Ω output), and the DA-250DH features a 250 W x 2 channels (19.6 Ω output) configuration. Besides, each model's output ...

  • Vector DA-250DH CU - page 7

    Rack mounting screws are not supplied with the unit. Be sure to use the screws with a diameter of over 5 mm (0.2") and length of over 12 mm (0.47") to mount the unit. Failure to do so may cause personal injury. CAUTION 6. INST ALLA TION PRECAUTIONS 7 • The supplied power supply cord is designed for exclusive use with this unit. Never us ...

  • Vector DA-250DH CU - page 8

    8 1. Power switch [ ON / OFF] Power is switched on and off with each depression of this switch. 2. Power indicator [POWER] Lights blue when the power is switched on. 3. Input level controls [CH 1/BRIDGE, CH 2] Adjust the input level of each channel. 4. Ventilation panel (Air Vent) A filter is located inside the ventilation panel. To clean the filte ...

  • Vector DA-250DH CU - page 9

    9 [Rear] 6 7 9 10 11 DA-250D DA-250DH 8 6 7 9 10 11 8 6. AC inlet Connect the supplied power cord to this inlet. 7. Functional ground terminal [SIGNAL GND] Hum noise may be generated when external equipment is connected to the unit. Connecting this terminal to the functional ground terminal of the external equipment may reduce the hum noise. Note T ...

  • Vector DA-250DH CU - page 10

    10 Step 1. Switch off the unit's power. Step 2. Set the BRIDGE ON/OFF switch and CH 1 mode ON/OFF switch. Step 3. Connect the sound source equipment to the Input terminals. Note: Refer to p. 12 for the removable terminal plug connection. Step 4. Connect speakers to the Speaker output terminals. 4-1. Unscrew the output terminal cover. 4-2. Stri ...

  • Vector DA-250DH CU - page 11

    11 CH2 CH1 Speaker output terminals Switch BRIDGE CH 1 mode OFF OFF Setting 4 – 8 Ω 4 – 8 Ω 19.6 Ω 19.6 Ω CH1 CH1 CH2 CH2 DA-250D DA-250DH [2 inputs - 2 outputs] (factory-preset) Speaker output terminals Switch BRIDGE CH 1 mode ON OFF Setting 8 Ω 39.2 Ω CH1 CH1 CH2 DA-250D DA-250DH CH2 CH1 Speaker output terminals Switch BRIDGE CH 1 mode ...

  • Vector DA-250DH CU - page 12

    Cable end treatment 12 Connector connections Step 1. Loosen the terminal screw, then insert the cable. Step 2. Retighten the terminal screw. (Pull on the cable to ensure it is securely connected.) Tip Recommended slotted screwdriver type: Screwdriver with blade that is 3 mm (0.12") in width T ightens Loosens T erminal screw Slotted screwdriver ...

  • Vector DA-250DH CU - page 13

    13 The Input sensitivity can be set to +4 dB (factory-preset) or -10 dB for each channel. Besides, only the DA-250DH employs the High-pass filter on each channel, which can be set to "ON" or "OFF." Step 1. Unscrew 7 screws securing the top cover of the unit, then detach it. Step 2. Change the jumper socket position to "+4 d ...

  • Vector DA-250DH CU - page 14

    14 1 1. PROTECTION OPERA TION LIST Failure Protection Operation Indicator Remedy Recovery Overcurrent due to overload Current limiter activated when impedance drops below the specified value. Peak indicator lights. Remove overload. Connecting a correct load automatically restores normal operation. Short circuit Current limiter activated. Load is di ...

  • Vector DA-250DH CU - page 15

    15 13. CLEANING THE FIL TER Step 1. Switch off the unit's power. Step 2. Remove the ventilation panel as shown in the figure. Step 3. Detach the filter inside the ventilation panel. Step 4. Clear the filter of dust. Step 5. Replace the filter and ventilation panel. Ventilation Panel 2 3 Filter Ventilation Panel Detach the panel by pressing on ...

  • Vector DA-250DH CU - page 16

    16 H C CH 1 INPUT E H C CH 2 INPUT E Current Limiter Short Detector Protection Circuit OUTPUT 1 relay CH 1 OUTPUT CH 2 OUTPUT +4 dB - 10 dB CH 1 sensitivity selection jumper (+4 dB/ - 10 dB) CH 1 input level control +4 dB - 10 dB CH 2 sensitivity selection jumper (+4 dB/ - 10 dB) CH 2 input level control ON OFF BRIDGE ON/OFF switch + - BRIDGE OUTPU ...

  • Vector DA-250DH CU - page 17

    17 15. DIMENSIONAL DIAGRAM Unit: mm (inches) 401.8 (15.82) 371 (14.61) 22.5 (0.89) 482 (18.98) 465 (18.31) 442 (17.4) 31.8 (1.25) 44 (1.73) ...

  • Vector DA-250DH CU - page 18

    18 * 0 dB = 0.775 V Note: The design and specifications are subject to change without notice for improvement. Power cord (2 m) ................................................................. 1 Removable terminal plug (3 pins) ........................................ 2 Tamper-proof cap .............................................................. ...

  • Vector DA-250DH CU - page 19

    19 * 0 dB = 0.775 V Note: The design and specifications are subject to change without notice for improvement. Power cord (2 m) ................................................................. 1 Removable terminal plug (3 pins) ........................................ 2 Tamper-proof cap .............................................................. ...

  • Vector DA-250DH CU - page 20

    133-22-125-50 URL: http://www.toa.jp/ ...

Manufacturer Vector Category Stereo Amplifier

Documents that we receive from a manufacturer of a Vector DA-250DH CU can be divided into several groups. They are, among others:
- Vector technical drawings
- DA-250DH CU manuals
- Vector product data sheets
- information booklets
- or energy labels Vector DA-250DH CU
All of them are important, but the most important information from the point of view of use of the device are in the user manual Vector DA-250DH CU.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Vector DA-250DH CU, service manual, brief instructions and user manuals Vector DA-250DH CU. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Vector DA-250DH CU.

Similar manuals

A complete manual for the device Vector DA-250DH CU, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Vector DA-250DH CU by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Vector DA-250DH CU.

A complete Vector manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Vector DA-250DH CU - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Vector DA-250DH CU, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Vector DA-250DH CU, that we can find in the current document
3. Tips how to use the basic functions of the device Vector DA-250DH CU - which should help us in our first steps of using Vector DA-250DH CU
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Vector DA-250DH CU
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Vector DA-250DH CU in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Vector DA-250DH CU?

Use the form below

If you did not solve your problem by using a manual Vector DA-250DH CU, ask a question using the form below. If a user had a similar problem with Vector DA-250DH CU it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)