English dropdown-ico

Manual American Dynamics 1461

13 pages 0.13 mb
Download

Go to site of 13

Summary
  • American Dynamics 1461 - page 1

    Model 1461 Single Channel Motion Detector Installation and Operating Instructions The 1461 is an analog device for the detection of motion in the field of view of a TV camera. It is intended as an aid to personnel engaged in monitoring a TV display and is not intended as a primary alarm input device. ...

  • American Dynamics 1461 - page 2

    The software/firmware furnished with this equipment is confidential to and is copyrighted by AMERICAN DYNAMICS. It is not to be copied or disclosed in any manner without the express written consent of AMERICAN DYNAMICS. The software/firmware is furnished to the purchaser under a license for use on a single system. Note: Information furnished by AME ...

  • American Dynamics 1461 - page 3

    = =- AMERXfAN -=L-‘DYNRM/CS The installation of this product should be made by qualified service personnel and should conform to all local codes. symbol, within an equilateral triangle, is intended to alert the user to the presence of product’s enclosure that may he of suffi- cient magnitude to constitute a risk of elec- tric shock to persons. ...

  • American Dynamics 1461 - page 4

    Table of Contents Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installat ...

  • American Dynamics 1461 - page 5

    DESCRIPTION DISPLAY BYPASS AUTO RESET Figure 1 - 1461 Front Panel PRODUCT DESCRIPTION The 1461 is an analog device for the detection of motion in the field of view of a TV camera. It is intended as an aid to personnel engaged in monitoring a TV display and is not intended as a primary alarm input device. Only standard video from a camera is require ...

  • American Dynamics 1461 - page 6

    CONNECTIONS 12ov 60HZ 0 CONTROL Figure 2 - 1461 Rear Panel CONNECTIONS Video Input Auxiliary Start Relay Connections The 5-pin CONTROL connector is also used to access a Connect a good grade of RG59/U video cable from the camera normally open, SPST relay which can be used to activate a to the VIDEO IN BNC Connector on the rear panel of the VCR or o ...

  • American Dynamics 1461 - page 7

    OPERATION -@+ -@+ -@+ DISPLAY BYPASS AUTO RESET Figure 3 - 1461 Front Panel Controls OPERATION Operating Controls All operating controls are on the front panel of the 1461, as shown in Figure 3. Power ON LED - This LED is lit when power is applied to the unit. ALERT LEDs - These two LEDs flash alternately when motion has been detected, until turned ...

  • American Dynamics 1461 - page 8

    OPERATION Setup 1) Apply power to the motion detector and associated cameras, switchers, and monitors. It is normally better to have power to auxiliary equipment, such as VCR’s, off during initial setup. 2) If necessary, adjust the switcher to display the camera video which is to be monitored by the motion detector. 3) Turn all three motion detec ...

  • American Dynamics 1461 - page 9

    APPENDIX ...

  • American Dynamics 1461 - page 10

    SYSTEM CONSIDERATIONS SYSTEM CONSIDERATIONS Motion detectors operate on the principle that any change in the scene from a camera is caused by some moving object. They monitor the content of a camera scene within a sensitized area and detect differences in the scene content in that area from one TV frame to the next. Moving objects in the sensitized ...

  • American Dynamics 1461 - page 11

    SYSTEM CONSIDERATIONS The performance of various camera-lens combinations at different light levels may be obtained from the manufacturer’s data. For optimum performance, the 1461 requires a moderately noise-free video signal at industry standard voltage levels. The camera-lens combination should be selected more conservatively than is normal in ...

  • American Dynamics 1461 - page 12

    TYPICAL SYSTEM CONNECTIONS 1461 Motion Detectors to 1408A Switcher 1461 MOTION DETECTORS CONTROL IN OUT 5 CAMERA 4 30 : . . -. REMOTE START CAMERA 1 m ---L Local VCR NOTE: Impedance of local VCR and MONITOR must L oc - 1 be set to HI-Z 1408A SWITCHER REMOTE START -I ) 0 - Lozal MONITOR lo 0 0 01 MONITOR C TIME-LAPSE VCR ...

  • American Dynamics 1461 - page 13

    SPECIFICATIONS Voltage Supply: 1461 - 120 VAC, 50/60 Hz 1461101 - 13.5 VDC (11 to 18 V) - 3/8 Amp Slo-Blo fuse 1461X - 230 VAC, 50/60 Hz Power: 3 watts Aux Relay Contacts: Power - 10 VA max Voltage - 30 VDC or RMS max Current - 0.25 Amps DC or RMS max. (resistive load) Video Input: Passive looping, 525 line, 60 Hz “X” Models are 625 line, 50 Hz ...

Manufacturer American Dynamics Category Home Safety Product

Documents that we receive from a manufacturer of a American Dynamics 1461 can be divided into several groups. They are, among others:
- American Dynamics technical drawings
- 1461 manuals
- American Dynamics product data sheets
- information booklets
- or energy labels American Dynamics 1461
All of them are important, but the most important information from the point of view of use of the device are in the user manual American Dynamics 1461.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals American Dynamics 1461, service manual, brief instructions and user manuals American Dynamics 1461. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product American Dynamics 1461.

Similar manuals

A complete manual for the device American Dynamics 1461, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use American Dynamics 1461 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of American Dynamics 1461.

A complete American Dynamics manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual American Dynamics 1461 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the American Dynamics 1461, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the American Dynamics 1461, that we can find in the current document
3. Tips how to use the basic functions of the device American Dynamics 1461 - which should help us in our first steps of using American Dynamics 1461
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with American Dynamics 1461
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of American Dynamics 1461 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning American Dynamics 1461?

Use the form below

If you did not solve your problem by using a manual American Dynamics 1461, ask a question using the form below. If a user had a similar problem with American Dynamics 1461 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)