Manual Siemens SF 25M250

32 pages Not applicable
Download

Go to site of 32

Summary
  • Siemens SF 25M250 - page 1

        en Instructions for use ...

  • Siemens SF 25M250 - page 2

    ...

  • Siemens SF 25M250 - page 3

    en Index Safety instructions 4 . . . . . . . . . . . . . Getting to know your appliance 6 . . W ater softener 7 . . . . . . . . . . . . . . . . Filling in the Salt 8 . . . . . . . . . . . . . . . Adding rinse aid 9 . . . . . . . . . . . . . . . Not suitable for the dishwasher 10 . . Arranging crockery , glasses, etc. in the dishwasher 10 . . . . . ...

  • Siemens SF 25M250 - page 4

    en 4 Safety instructions Delivery Immediately check the packaging and dishwasher for any damage which may have been caused in transit. Do not use a damaged appliance, but consult your supplier . Please dispose of packaging material properly: Installation Install and connect the appliance according to the installation and assembly instructions. The ...

  • Siemens SF 25M250 - page 5

    en 5 Children in the household Do not let infants play or operate the dishwasher . Keep cleaning and rinsing agents out of the reach of infants. These may cause chemical burns in the mouth, throat and eyes or asphyxiation. Keep infants away from the open dishwasher . It could contain residue of the cleaning agent. If the appliance is installed at e ...

  • Siemens SF 25M250 - page 6

    en 6 Getting to know your appliance Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front. Individual positions are referred to in the text. Control panel 1 Main switch 2 Door Opener 3 Programme selector (retractable*) 4 Additional options* 5 “Check water supply” display 6 Salt refill indicato ...

  • Siemens SF 25M250 - page 7

    en 7 W ater softener In order to rinse dishes and glasses satisfactorily , the dishwasher requires soft water , i.e. containing little or no lime, otherwise water stains will be left behind on crockery and glasses, etc. If the tap water exceeds a certain level of hardness, it must be softened, i.e. decalcified, so that it can be used in the dishwas ...

  • Siemens SF 25M250 - page 8

    en 8 Filling in the Salt Open the screw-type cap of the compartment 24 . W arning Before switching on the appliance for the first time, pour approx. 1 litre of water into the salt dispenser . Then refill with salt (not cooking salt) until the salt container is full (max. 1.5 kg). When you refill the salt, water is being displaced and drains of f. R ...

  • Siemens SF 25M250 - page 9

    en 9 Adding rinse aid The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Open the cover on the rinse-aid dispenser 29 . T o do this, press the mark (1 ) on the cover and simultaneously lift the cover on the control plate (2 ). Carefully pour in the rinse aid to just below the edge of th ...

  • Siemens SF 25M250 - page 10

    en 10 Not suitable for the dishwasher The following should not be cleaned in the dishwasher: W ooden cutlery and utensils – these will leach out and become unsightly; even the utilised stickers are not suitable for the temperatures which occur . Sensitive ornamental glasses, craft utensil and vases, special antique or irretrievable utensils. Thes ...

  • Siemens SF 25M250 - page 11

    en 1 1 Cups and glasses Upper basket 20 * not included with all models Pots and pans Lower basket 27 Cutlery Cutlery should be placed in the dishwasher always unsorted and with the eating surface pointing downwards. The spray jet is then better able to reach the individual parts. T o prevent injuries, place long, pointed accessories and knives on t ...

  • Siemens SF 25M250 - page 12

    en 12 Small accessories holder* * some models Light-weight plastic accessories, e.g. cups, lids, etc. can be held securely in the small accessories holder . Adjusting position of basket * * not on all models The top basket can be inserted on either its upper or lower rollers, according to requirement. This enables more height to be gained for bigge ...

  • Siemens SF 25M250 - page 13

    en 13 T op basket with side levers (Rackmatic) Pull out the top basket. T o lower the basket, press in succession the two levers on the left and right sides of the basket. Always take hold of the side of the basket on the upper edge, otherwise the basket will not drop smoothly (and may damage the utensils). T o raise the basket, take hold of the ba ...

  • Siemens SF 25M250 - page 14

    en 14 Detergents Information about detergents Y ou can use any brand of liquid or powder detergent, as well as tablets, that have been specifically designed for use in domestic dishwashers. (Do not use normal washing-up liquid!) Nowadays there are three types of dishwasher detergent available: 1. those containing phosphates and chlorine, 2. those c ...

  • Siemens SF 25M250 - page 15

    en 15 Reduce costs! If your dishes are only moderately dirty , you may be able to use less detergent than recommended. Close the lid on the detergent compartment. Press down the lid (1) until it clicks shut (2). If you are using detergent in tablet form, read the manufacturer ’s recommendations on the packaging in order to determine where the tab ...

  • Siemens SF 25M250 - page 16

    en 16 Note Optimum rinsing and drying results can be obtained by using standard detergents in conjunction with separate application of salt and rinse aid. Observance of the operating instructions or information on the packaging of the combined detergents determines their ef fectiveness. Note Even if the rinse aid and/or salt refill indicator is lit ...

  • Siemens SF 25M250 - page 17

    en 17 Overview of programmes The max. possible number of programmes is illustrated in this overview . The corresponding programmes for your appliance can be found on the fascia. Cof fee, cake, milk, sausage, cold drinks, salads Soups, souf flés, potatoes, pastries, rice, eggs, fried food Delicate T ype of Dishes e.g. porcelain, pans, cutlery , gla ...

  • Siemens SF 25M250 - page 18

    en 18 W ashing dishes Reduce costs! If only a small number of dishes have been loaded into the dishwasher , selecting a programme that operates at the next lowest temperature will usually suf fice. Programme specifications The programme specifications can be found in the summary of instructions. Programme specifications refer to normal conditions. ...

  • Siemens SF 25M250 - page 19

    en 19 Interrupting the programme Set main switch 1 to OFF . Indicator lights extinguish. The programme is retained in the dishwasher memory . If the hot water was switched ON or the appliance has already heated up and then the appliance door opened, leave the door ajar for several minutes and then close. Otherwise, the appliance door may fly open d ...

  • Siemens SF 25M250 - page 20

    en 20 Additional functions Pre-Soak * The Pre-Soak programme option serves to perform a pre-soak cycle before the main programme. This cycle enables cookware, e.g. pans, bowls, etc. to be pre-soaked and pre-rinsed in the lower rack. If you wish to pre-soak the dishes, this programme option must be selected by pressing the “Pre-Soak” button befo ...

  • Siemens SF 25M250 - page 21

    en 21 Filters The filters 25 prevent large particles of food in the water from reaching the pump. These particles may occasionally block the filters. When the appliance has finished washing, check the filters for particles of food and, if required, clean. After undoing the coarse micro-filter , the filter unit can be removed. Remove any particles o ...

  • Siemens SF 25M250 - page 22

    en 22 Pump * * on applicable models Larger remnants of food that have not been trapped by the filters and have been left in the water can cause a blockage in the pump. The water is no longer pumped out of the dishwasher and it can be seen covering the filter . Proceed as follows: First, always disconnect the appliance from the power supply . Ladle ...

  • Siemens SF 25M250 - page 23

    en 23 ... when the appliance is switched on The appliance does not start. The mains fuse has tripped. The appliance plug has not been inserted. The appliance door has not been shut properly . The tap has not been turned on. The filter on the water supply hose is blocked. Switch of f the appliance and pull out the mains plug. T urn of f the tap. The ...

  • Siemens SF 25M250 - page 24

    en 24 Knocking sound can be heard while washing is taking place A spray arm is knocking against the dishes inside the appliance. Rattling sound can be heard while washing is taking place Crockery has not been stacked properly inside the appliance. Knocking sound coming from inlet valves This is caused by the way the water pipes have been laid and i ...

  • Siemens SF 25M250 - page 25

    en 25 Customer Service Please call your local service agent, if you are not able to resolve any problem yourself. The name of your nearest service agent is shown in the Customer Service address list. When you call, please provide details of the model number (1) and the production (FD) number (2) which are shown on the nameplate 31 on the appliance ...

  • Siemens SF 25M250 - page 26

    en 26 Installation The dishwasher must be connected by a qualified technician to ensure correct operation. The specifications for supply , drainage and connected load must fulfil the required criteria as stated in the following paragraphs or in the installation instructions. Install the appliance in the following sequence: – Check the delivery ? ...

  • Siemens SF 25M250 - page 27

    en 27 T ransporting the dishwasher Drain water from the dishwasher . Secure all loose parts. The appliance should only be transported in an upright position. If the appliance is not kept upright during transport, any water left inside may seep into the control module and cause subsequent errors with programme functions. Drain the appliance accordin ...

  • Siemens SF 25M250 - page 28

    en 28 Disposal of the packaging Please dispose of the packaging material in an environmentally friendly manner . Keep children away from shipping carton and packaging components. Danger of suf focation from folding cartons and plastic film. D Corrugated cardboard consists mainly of wastepaper . D The moulded polystyrene parts do not contain any chl ...

  • Siemens SF 25M250 - page 29

    en 29 en Subjekt to modification ...

  • Siemens SF 25M250 - page 30

    ...

  • Siemens SF 25M250 - page 31

    ...

  • Siemens SF 25M250 - page 32

          AQUA-ST OP guarantee (does not apply to appliances without Aqua-Stop) In addition to warranty claims against the seller based on the purchase contract and in addition to our appliance warranty we will pay damages under the following conditions: 1. If our Aqua-Stop system ...

Manufacturer Siemens Category Dishwasher

Documents that we receive from a manufacturer of a Siemens SF 25M250 can be divided into several groups. They are, among others:
- Siemens technical drawings
- SF 25M250 manuals
- Siemens product data sheets
- information booklets
- or energy labels Siemens SF 25M250
All of them are important, but the most important information from the point of view of use of the device are in the user manual Siemens SF 25M250.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Siemens SF 25M250, service manual, brief instructions and user manuals Siemens SF 25M250. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Siemens SF 25M250.

Similar manuals

A complete manual for the device Siemens SF 25M250, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Siemens SF 25M250 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Siemens SF 25M250.

A complete Siemens manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Siemens SF 25M250 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Siemens SF 25M250, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Siemens SF 25M250, that we can find in the current document
3. Tips how to use the basic functions of the device Siemens SF 25M250 - which should help us in our first steps of using Siemens SF 25M250
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Siemens SF 25M250
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Siemens SF 25M250 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Siemens SF 25M250?

Use the form below

If you did not solve your problem by using a manual Siemens SF 25M250, ask a question using the form below. If a user had a similar problem with Siemens SF 25M250 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)