Manual GE JBS55

12 pages 0.34 mb
Download

Go to site of 12

Summary
  • GE JBS55 - page 1

    1 229C 4053P545-5 31-10556-5 06-04 JR EER3000, EER3001, JBP24, JBP25, JBP26, JBP35, JBP48, JBP64, JBP66, JBP67, JBP68, JBP69, JBP71, JBP78, JBP80, JBP82, JBP83, JBP84, JBP99, JB600, JB710, JB905, JB968, JB988, JBS55 Installation Free-Standing Instructions Electric Ranges BEFORE YOU BEGIN Read these instructions completely and carefully . • IMPOR ...

  • GE JBS55 - page 2

    TOOLS YOU WILL NEED FOR YOUR SAFETY : All rough-in and spacing dimensions must be met for safe use of your range. Electricity to the range can be disconnected at the outlet without moving the range if the outlet is in the preferred location (remove lower drawer). T o reduce the risk of burns or fire when reaching over hot surface elements, cabinet ...

  • GE JBS55 - page 3

    3 Installation Instructions PREP ARE THE OPENING See illustrations for all rough-in and spacing dimensions. The range may be placed with 0” clearance (flush) at the back wall and side walls of the cabinet. NOTE: Use a 4 ′ power cord to prevent interference with the storage drawer . Power cords 4 1 ⁄ 2 to 6 ′ long may have to be dressed to a ...

  • GE JBS55 - page 4

    4 Installation Instructions ELECTRICAL CONNECTIONS Use only a 3-conductor or a 4-conductor UL-listed range cord. These cords may be provided with ring terminals on wire and a strain relief device. A range cord rated at 40 amps with 125/250 minimum volt range is required. A 50 amp range cord is not recommended but if used, it should be marked for us ...

  • GE JBS55 - page 5

    5 Installation Instructions POWER CORD AND STRAIN RELIEF INST ALLA TION Remove the wire cover (on the back of the range) by removing five (5) screws using a 1/4” nut driver . Do not discard these screws. Remove the knockout ring (1 3 ⁄ 8 ″ ) located on bracket directly below the terminal block. T o remove the knockout, use a pair of pliers to ...

  • GE JBS55 - page 6

    6 Installation Instructions ELECTRICAL CONNECTIONS (CONT .) 4-WIRE POWER CORD INST ALLA TION W ARNING: The neutral wire of the supply circuit must be connected to the neutral terminal located in the lower center of the terminal block. The power leads must be connected to the lower left and the lower right terminals of the terminal block. The 4th gr ...

  • GE JBS55 - page 7

    7 Installation Instructions 3-WIRE CONDUIT INST ALLA TION Loosen the 3 lower terminal screws from the terminal block. Insert the center bare wire (white/neutral) tip through the bottom center terminal block opening. On certain models, the wire will need to be inserted through the ground strap opening and then into the bottom center block opening. I ...

  • GE JBS55 - page 8

    8 Installation Instructions INST ALL THE RANGE ANTI-TIP DEVICE INST ALLA TION An Anti-T ip bracket is supplied with instructions for installation in a variety of locations. The instructions include all necessary information to complete the installation. Read the Safety Instructions and the instructions that fit your situation before beginning insta ...

  • GE JBS55 - page 9

    LEVEL THE RANGE Install the oven shelves in the oven and position the range where it will be installed. Check for levelness by placing a spirit level or a cup, partially filled with water , on one of the oven shelves. If using a spirit level, take two readings—with the level placed diagonally first in one direction and then the other . The front ...

  • GE JBS55 - page 10

    10 Notes ...

  • GE JBS55 - page 11

    11 Notes ...

  • GE JBS55 - page 12

    12 Printed in the United States ...

Manufacturer GE Category Range

Documents that we receive from a manufacturer of a GE JBS55 can be divided into several groups. They are, among others:
- GE technical drawings
- JBS55 manuals
- GE product data sheets
- information booklets
- or energy labels GE JBS55
All of them are important, but the most important information from the point of view of use of the device are in the user manual GE JBS55.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals GE JBS55, service manual, brief instructions and user manuals GE JBS55. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product GE JBS55.

Similar manuals

A complete manual for the device GE JBS55, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use GE JBS55 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of GE JBS55.

A complete GE manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual GE JBS55 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the GE JBS55, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the GE JBS55, that we can find in the current document
3. Tips how to use the basic functions of the device GE JBS55 - which should help us in our first steps of using GE JBS55
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with GE JBS55
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of GE JBS55 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning GE JBS55?

Use the form below

If you did not solve your problem by using a manual GE JBS55, ask a question using the form below. If a user had a similar problem with GE JBS55 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Comments (0)