English dropdown-ico

Manual Sharp PNE471R

43 pages Not applicable
Download

Go to site of 43

Summary
  • Sharp PNE471R - page 1

    PN-E471R PN-E421 LCD MONIT OR OPERA TION GUIDE ...

  • Sharp PNE471R - page 2

    2 E This guide contains instructions regarding operation, settings, and similar details. For instructions regarding connection and installation, refer to the included Operation Manual. Manual Scope - Microsoft, Windows and Internet Explorer are registered trademarks of Microsoft Corporation. - HDMI, the HDMI Logo and High-Denition Multimedia Int ...

  • Sharp PNE471R - page 3

    3 E n Front view 2 345 1 1. LCD panel 2. Remote control sensor 3. Input switch (See page 5.) 4. Power switch 5. Power LED TIPS • Use a pointed object such as a pen tip to press the switches at the front of the monitor . Part Names n Rear view When the PN-ZB01 (optional) is attached 1 18 17 16 15 19 79 2 5 6 4 10 11 22 21 20 24 23 12 13 14 3 8 1. ...

  • Sharp PNE471R - page 4

    E 4 Part Names n Remote control unit 1 2 3 4 5 6 9 8 7 1. Signal transmitter 2. POWER button 3. DISPLA Y button (See page 5.) 4. MUTE button (See page 5.) 5. VOL +/- buttons (See page 5.) BRIGHT +/- buttons (See page 5.) Cursor control ( / / / ) buttons 6. INPUT button (See page 5.) 7. MODE button (See page 5.) 8. SIZE button (See page 5.) 9. MENU ...

  • Sharp PNE471R - page 5

    5 E Basic Operation 1 2 3 4 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter . * Y ou can select the input terminal by pressing the input switch of the monitor . Input mode Video Audio PC D-SUB PC D-sub input terminal Audio input terminal PC HDMI PC/A V HDMI input terminal *1 *2 A ...

  • Sharp PNE471R - page 6

    E 6 Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it lls the entire screen. A V input An image with a 4:3 aspect ratio is stretched to ll the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enla ...

  • Sharp PNE471R - page 7

    7 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 10 to 13 for details of each menu items. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. n E ...

  • Sharp PNE471R - page 8

    E 8 Menu Items List of menu items The displayed menu items vary depending on whether or not the PN-ZB01 (optional) is attached. ○: Item is available, -: Item is not available. Menu Item PN-ZB01 (optional) Not attached Attached SCREEN AUTO ○ ○ CLOCK ○ ○ PHASE ○ ○ H-POS ○ ○ V -POS ○ ○ H-SIZE ○ ○ V -SIZE ○ ○ H-RESOLUTION ...

  • Sharp PNE471R - page 9

    E 9 Menu Item PN-ZB01 (optional) Not attached Attached OPTION DA TE/TIME SETTING ○ ○ SCHEDULE ○ ○ INPUT SELECT DVI - ○ BNC - ○ HDMI ○ ○ AUDIO SELECT PC DVI-D - ○ PC HDMI ○ ○ PC D-SUB - ○ PC RGB - ○ A V DVI-D - ○ A V HDMI ○ ○ A V COMPONENT - ○ A V S-VIDEO - ○ A V VIDEO - ○ INPUT SIGNAL 480 LINES ○ ○ 768 LINE ...

  • Sharp PNE471R - page 10

    E 10 Menu item details The menu will differ depending on the input mode. n SCREEN AUTO (PC D-SUB/PC RGB) The CLOCK, PHASE, H-POS, and V -POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC D-sub input terminal or PC RGB input terminals to display a PC screen for the rst time or when you ...

  • Sharp PNE471R - page 11

    E 11 n AUDIO TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items to the factory preset values. Select “ON” and then press . n SETUP OSD H-POSITION Adjusts the horizontal display positio ...

  • Sharp PNE471R - page 12

    E 12 Menu Items AUTO INPUT CHANGE Specify whether to change inputs automatically . When ON is selected and no signal is present in the selected input mode, AUTO INPUT CHANGE automatically changes the selected mode to another mode where a video signal is present. When video signals exist in multiple input modes, the switching priority is as follows: ...

  • Sharp PNE471R - page 13

    E 13 Menu Items n PIP/PbyP PIP MODES Sets the display method. OFF ......... Displays one screen. PIP ........... Displays a sub screen inside a main screen. PbyP ........ Displays a main screen and a sub screen in a line. PbyP2 ...... Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. PIP SIZE Set ...

  • Sharp PNE471R - page 14

    E 14 Menu Items n Enlarge • Y ou can align several monitors and integrate them into a single large screen to display . • Up to ve monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Ve rtical direction: 2 monitors Hori ...

  • Sharp PNE471R - page 15

    E 15 n SCHEDULE Y ou can set the time to switch the monitor on and off. Set this function with “SCHEDULE” in the OPTION menu. (See page 12.) SCHEDULE No. POWER DA Y OF THE WEE KT IME INPU T XXXX/XX/XX XXX XX:XX:XX (2) OK … [MENU] 1920x1080 V: 60 Hz H: 67.5 kHz (1) (3) (4) (5) PC D-SUB 1. Press or to select the SCHEDULE number , and press . 2. ...

  • Sharp PNE471R - page 16

    E 16 n ADV ANCED items (A V input) (See page 10 for additional Menu item details.) FLESH TONE Adjust the hue control. 3D-NR Reduce the noise of playback images on video. Setting a higher level reduces more noise. However , it may cause blurring on an image. MPEG-NR Reduce block noise caused by digital compression. 3D-Y/C (A V VIDEO) Specify whether ...

  • Sharp PNE471R - page 17

    17 E Y ou can return the settings to their factory-preset values and restrict operations. 1. After pressing for about 5 seconds, press , , , and in that order . OFF UNLOCKED ON ON LED OFF MONI TO R FUNCTION 1/1 AL L RESET ADJUSTMENT LOCK RS-232C OSD DISPL AY LED TEMPER AT URE ALERT ST AT US ALERT POWER BUT TO N CONTROLLER INPUT END … [MENU] 2. Se ...

  • Sharp PNE471R - page 18

    18 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. Y ou can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 19), you can make input mode selection/adjustment or can check the status of a specic monitor . Preca ...

  • Sharp PNE471R - page 19

    E 19 Controlling the Monitor with a PC (RS-232C) n Response code format When a command has been executed correctly O K Return code (0D H , 0A H ) A response is returned after a command is executed. * If an ID number has been assigned O K SPC 0 0 1 ID number of respondin g monitor Space (20 H ) Return code (0D H , 0A H ) When a command has not been ...

  • Sharp PNE471R - page 20

    E 20 Controlling the Monitor with a PC (RS-232C) n Commands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST ........ . A monitor receiving this command sets its own ID number in the parameter eld. Example: IDST0001 OK 001 ← The ...

  • Sharp PNE471R - page 21

    E 21 Controlling the Monitor with a PC (RS-232C) n Repeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. Y ou can use Repeater control function without assigning ID numbers. [E xamp l e ] Set 1 Set 2 Set 3S et 4 * If monitors are ...

  • Sharp PNE471R - page 22

    E 22 RS-232C command table How to read the command table Command: Command eld (See page 18.) Direction: W When the “Parameter” is set in the parameter eld (see page 18), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be obtained by setting “????”, “ ?” ...

  • Sharp PNE471R - page 23

    E 23 PICTURE menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) A UTO AGIN W 1 When the input mode is PC D-SUB, PC RGB. - ○ ○ CONTRAST CONT WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. ○ BLACK LEVEL BL VL WR 0-60 0-60 0-127 on PC D-SUB, PC RGB. TINT TINT WR 0-60 0-60 COLORS COLR WR 0-60 0-60 SHARPNESS SHRP WR 0 ...

  • Sharp PNE471R - page 24

    E 24 SETUP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) OSD H-POSITION OSDH WR 0-100 0-100 ○ ○ ○ OSD V -POSITION OSDV WR 0-100 0-100 MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: POR TRAIT ○ MONAURAL AUDIO MONO WR 0-1 0-1 0: OFF , 1: ON ○ LANGUAGE LANG WR 14 14 ENGLISH ○ 1 1 DEUTSCH 2 2 FRANÇAIS 3 ...

  • Sharp PNE471R - page 25

    E 25 OPTION menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) D AT E /TIME SETTING DATE WR AABBCCDDEE AABBCCDDEE AA: Y ear, BB: Month, CC: Day , DD: Time, EE: Minute ○ ○ ○ SCHEDULE SC01- SC08 WR ABCDEFFGGH ABCDEFFGGH Schedule of a specied number A: Schedule 0= Not effective, 1 = Effective B: Power 0 = ...

  • Sharp PNE471R - page 26

    E 26 Controlling the Monitor with a PC (RS-232C) ENLARGE menu (When the input mode is PC) Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) ENLARGE MODE EMAG WR 0-4 0-4 0: OFF , 1: 2 x 2, 2: 3 x 3, 3: 4 x 4, 4: 5 x 5 - ○ ○ EMHV WR 1 1-55 1 1-55 1 x 1 (OFF) to 5 x 5 (“m x n” is expressed as “mn”, where m ...

  • Sharp PNE471R - page 27

    E 27 PIP/PbyP menu Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) PIP MODES MWIN WR 0-3 0-3 0: OFF , 1: PIP , 2: PbyP , 3: PbyP2 ○ ○ ○ PIP SIZE MPSZ WR 1-12 1-12 ○ PIP POS THE LONGEST DIRECTION MHPS W 0-100 ○ R 0-100 ○ THE SHORTEST DIRECTION MVPS W 0-100 ○ R 0-100 ○ PIP POS LD+SD BA TCH MPOS W 0-1 ...

  • Sharp PNE471R - page 28

    E 28 Others Function Command Direction Parameter Reply Control/Response contents *1 *2 (A) (B) SCREEN SIZE (PC) WIDE WR 1-5 1-5 1: WIDE, 2: NORMAL, 3: Dot by Dot, 4: ZOOM1, 5: ZOOM2 ○ ○ ○ SCREEN SIZE (A V) WIDE WR 1-5 1-5 1: WIDE, 2: ZOOM1, 3: ZOOM2, 4: NORMAL, 5: Dot by Dot ○ VOLUME VOLM WR 0-31 0-31 ○ MUTE MUTE WR 0-1 0-1 0: OFF , 1: ON ...

  • Sharp PNE471R - page 29

    29 E When the PN-ZB01 (optional) is attached, your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. Y ou can also congure the monitor to send e-mail notication when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). Hub LAN terminal LAN cabl ...

  • Sharp PNE471R - page 30

    30 E 30 ■ To setfromaPC When the monitor is connected to a PC, LAN settings can be congured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Congure the monitor ’s LAN settings (1) Connecting your monitor to a PC Connect a commercially available crossover LAN cable (UPT cable, Ca ...

  • Sharp PNE471R - page 31

    31 E 31 5. Click on “LAN SETUP” under NETWORK. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to “ON”. T o set the address manually , set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to “OFF”, specify an IP ...

  • Sharp PNE471R - page 32

    32 E 32 ■INFORMA TION Information about this monitor appears. ■CONTROL Y ou can control the operations corresponding to the buttons ( ) on the remote control unit. (See page 5.) TIPS • In standby mode, Power ON is the operation available. • MONITOR POWER turns the monitor power ON/ OFF regardless of the POWER BUTTON setting in the FUN ...

  • Sharp PNE471R - page 33

    33 E 33 ■NETWORK(LANSETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically , change this setting to “ON”. T o set the address manually , set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to ...

  • Sharp PNE471R - page 34

    34 E 34 ■NETWORK(GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network. Specify in minutes from 1 to 65535. ...

  • Sharp PNE471R - page 35

    35 E 35 ■MAIL(RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error . RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notication e-mail to. CONDITION Specify the conditions to send mails. When you check PERIODICAL, specify the date and time to ...

  • Sharp PNE471R - page 36

    36 E 36 Controlling the Monitor with a PC (LAN) ■SNMP Y ou can congure settings related to SNMP . SNMP SETTING Set whether to enable or disable SNMP . VERSION Set the version of the SNMP to be supported. COMMUNITY NAME 1 to 3 Set the name of the community required for the access. USER 1 to 3 Set the user name, password, authentication metho ...

  • Sharp PNE471R - page 37

    37 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power cord disconnected? • Is the main power switch off? • Is the monitor in standby mode (the power LED illuminating in orange)? • Make sure corre ...

  • Sharp PNE471R - page 38

    38 E Specications n Product Specications Model PN-E471R PN-E421 LCD component 47" Class [46-15/16 inch (1 19.3cm) diagonal] TFT LCD 42" Class [42-1/16 inch (106.7cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 1.06 billion colors Pixel pitch 0.542 mm (H) × 0.542 mm (V) 0.485 mm (H) × 0.485 mm (V) Vie ...

  • Sharp PNE471R - page 39

    39 E Specications n Dimensional Drawings Note that the values shown are approximate values. [ PN-E471R] 42-5/8 [1083] Opening width (41-1/16 [1043]) 38-1/16 [967] Opening height (23-1/8 [588]) 24-3/4 [628] 7-7/8 [200] VESA holes * Unit: inch [mm] 4-3/8 [ 111 ] 1-7/16 [37] 2- 11 /16 [69] 7-7/8 [200] 7-7/8 [200] 3-15/16 [100] 3-15/16 [100] When mo ...

  • Sharp PNE471R - page 40

    40 E Specications n Power management This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in order for the monitor ’s power management function to work. DPMS: Display Power Management Signaling DPMS Screen Power consumption* 1 Hsync Vsync ON ST A TE Display 260 W* 2 225 W* 2 Ye s Ye ...

  • Sharp PNE471R - page 41

    41 E n Compatible signal timing (PC) VESA Wide US TEXT Sun Screen resolution Hsync Vsyn cD ot frequency Digital 640 × 480 800 × 600 848 × 480 1024 × 768 1 152 × 864 1280 × 768 1280 × 800 1280 × 960 1280 × 1024 1360 × 768 1400 × 1050 1440 × 900 1600 × 1200 *1 1680 × 1050 1920 × 1200 *1 1280 × 720 1920 × 1080 720 × 400 1024 × 768 1 ...

  • Sharp PNE471R - page 42

    42 E Specications n PC/A V DVI-D input terminal pins (DVI-D 24 pin) No. Function No. Function 1 TMDS data 2- 13 N.C. 2 TMDS data 2+ 14 +5V 3 TMDS data 2/4 shield 15 GND 4 N.C. 16 Hot-plug detection 5 N.C. 17 TMDS data 0- 6 DDC clock 18 TMDS data 0+ 7 DDC data 19 TMDS data 0/5 shield 8 N.C. 20 N.C. 9 TMDS data 1- 21 N.C. 10 TMDS data 1+ 22 TMDS c ...

  • Sharp PNE471R - page 43

    PN-E471RE421 G EN10G(1) ...

Manufacturer Sharp Category Monitor

Documents that we receive from a manufacturer of a Sharp PNE471R can be divided into several groups. They are, among others:
- Sharp technical drawings
- PNE471R manuals
- Sharp product data sheets
- information booklets
- or energy labels Sharp PNE471R
All of them are important, but the most important information from the point of view of use of the device are in the user manual Sharp PNE471R.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Sharp PNE471R, service manual, brief instructions and user manuals Sharp PNE471R. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Sharp PNE471R.

Similar manuals

A complete manual for the device Sharp PNE471R, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Sharp PNE471R by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Sharp PNE471R.

A complete Sharp manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Sharp PNE471R - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Sharp PNE471R, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Sharp PNE471R, that we can find in the current document
3. Tips how to use the basic functions of the device Sharp PNE471R - which should help us in our first steps of using Sharp PNE471R
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Sharp PNE471R
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Sharp PNE471R in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Sharp PNE471R?

Use the form below

If you did not solve your problem by using a manual Sharp PNE471R, ask a question using the form below. If a user had a similar problem with Sharp PNE471R it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)