English dropdown-ico

Manual IOGear HomePlug to Ethernet Bridge GHPB42

75 pages 8.92 mb
Download

Go to site of 75

Summary
  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 1

    HomePlug to Ether net Bridge User Manual (GHPB42W6) ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 2

    Thank you f or purchasing one of the most user-friendly networking devices on the market. IOGEAR’ s HomePlug to Ether net Bridges and the Homeplug Networking Kit are fi rst-class networ king de vices designed to network your computers at home (or in y our small offi ce). This device allo ws you to set up your home netw or k via the most per vas ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 3

    T able of Contents W elcome ....................................................................................................................... ............... 3 Ov er vie w ...................................................................................................................................... 5 F eatures ......................... ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 4

    5 Overview IOGEAR’ s HomePlug Ether net Bridge allows y ou to network your home computers through the most per v asiv e medium in your house - the electric pow er lines - and share Broadband Inter net connections, printers, transf er fi les, pla y games, and more . This unit can be used to HomePlug-enable one computer with a 10/100Base-T adapter ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 5

    6 Features • Extend your WiFi network through existing po werlines • Network your gaming de vices through powerlines to pla y games with a remote par tner • No e xtra wires required to create a network, simply use the most per vasiv e medium in your home – pow erlines • V er y easy and intuitiv e to install and set up • HomePlug P ow er ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 6

    7 • A vailab le AC po wer outlets in the room. • Standard home pow er line wiring. • Computers with 10/100Base-T adapters, or 10/100Base-T s witch/hub . • When used as a node: Windows 98SE, ME, 2000, XP . • When used as a br idge: any operating system (OS transparent). Requirements System Requirements ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 7

    8 IOGEAR’ s HomePlug to Ether net Bridge allows y ou to network your computers via y our existing home pow er lines. It off ers a data transmission speed of up to 85 Mbps, and reaches up to 990 f eet through standard pow er lines. P ackage contents: F or GHPB42W6 (the kit): 2 Homeplug to Ether net bridge 2 CA T5 patch cable 6 f eet 1 User manual ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 8

    9 Intr oduction Front Vie w: 1. P owerline LED – lights up in green when other Homeplug de vices are detected on the same pow erline 2. Link/ACT – b links when data is sent through the Homeplug connection 3. Ether net por t- connecting to the Ether net of the computer or the de vices (router , wi-fi access point, gaming bo x, etc.) Back Vie w: ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 9

    10 Installation There are se veral w ays to network y our computers using the HomePlug Bridge. Before w e get star ted, please NO TE: Do not place HomePlug de vices under direct sunlight or near high heat emitting devices; Do not place HomePlug de vices near water or wet surf aces to av oid electr ic hazards; Do not place HomePlug de vices on any m ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 10

    11 5. There are sev eral wa ys to see whether the Homeplug bridge is functioning. One wa y is the obser ve the LED , the Link/A CT LED should star t blinking after y ou plug the br idge in the wall outlet. F or most of the Windows machines (as this Windows 2000 machine used to create this manual), y ou should see a message being prompted on the too ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 11

    6. Y ou can also go to “Control P anel”, select “Netw or k and Dial up and Connections. ” Click the “Local Area Connection” icon. 12 Installation ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 12

    13 Installation 7. Y ou can see the netw or k connection is already established. At this point, you can start communicating with the other computers or devices on the po werline. Please ref er to Networ k Confi guration section in ho w to set up networks for v ar ious pur poses. In order to add security and other utilities, you will need to instal ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 13

    14 1. Make sure that y our HomePlug br idge is NO T CONNECTED TO THE COM- PUTER bef ore you install the driv er . 2. Inser t the installation CD . If CD does not automatically load, run (CD Dr iv e Letter):setup .ex e. 3. Click Ne xt. Installation of the utility software ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 14

    15 Installation of the utility software Enter a user name and organization name, and contin ue installation. (User name and Organization ha v e no impor tance in device oper ation. This window might look slightly dif- f erent on other platforms.) 4. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 15

    16 Click “Ne xt” to contin ue. 5. Installation of the utility software ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 16

    17 Installation of the utility software Click “Install” to star t the Installation Wizard 6. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 17

    The f ollowing window will be prompted to indicate that the installation is successful. 7. T o uninstall the driver , simply go to your Add/Remov e programs control panel and remov e the IOGEAR P owerline Confi guration Utilities. Then restor t your computer to complete the uninstall. 18 Installation of the utility software ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 18

    19 Double clic k the IOGear P owerline Utility icon to star t the P ow erline Confi guration Utility . The utility is used to confi gure the Homeplug unit” 1. P owerline Confi guration Utility ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 19

    20 The Main tab shows the HomePlug units that are connected to the current computer and other de vices on the networ k. It will also tell Mac Address of each de vice. It will refresh the window , if you change de vices, and also will allow y ou to connect to different netw orks if multiple units are connected to y our computer . The connection qual ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 20

    21 The Main tab shows all the other HomePlug units on your po werline networ k. It will represent them by MA C Address, and will also show the a vailab le bandwidth to each unit (Units f ar ther aw ay from the current computer might hav e a lower Data Rate , since the distance is f ar ther). If you add or subtract units from your home netw or k, yo ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 21

    22 P owerline Confi guration Utility Note: If a Unit shows MA C Address of all 0’ s, this unit might not hav e a solid connection, or might not connect at all. If this is the case please contact technical suppor t Note: If there are units in your home , that you do not see in this Network scan, tr y to unplug all de vices, and plug them back in ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 22

    23 P owerline Confi guration Utility Press Enter P assw ord button to put in the DEK (De vice Encr yption Ke y) found on the pac kage or de vice. Enter this key into the P assw ord area. Click OK. Add all the DEK k eys f or each unit in your house . Note: The DEK is unique f or EACH HomePlug de vices. T o use this you will need to input the DEK f ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 23

    24 P owerline Confi guration Utility After putting in the pass word, click on Set Local De vices Only to ensure all data that is sent from this unit are encr ypted using 56-bit data encr yption standard and isolated from the other computer on the network. Users ma y also use different network name f or each HomePlug de vice attached to a computer ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 24

    25 P owerline Confi guration Utility The Diagnostics tab will allow users to see the de vices that are currently av ailable on the pow erline network 6. This screen displa ys the version number of the utility . Click Close to complete the confi gur ation. ” 7. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 25

    26 Networking T erms What is a node? A node is any giv en device that resides or is connected onto an e xisting network. A computer with a networ k card connected to a s witch is a node. The same thing applies to a Mac connected to a hub. What is a bridge? A bridge is used when connecting one side of the network with another networ k. Previously , ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 26

    27 Netw ork Confi guration Can I use both in the same network? Y es . It is perf ectly right to hav e both nodes and br idges on a network as long the maximum is not e xceeded. It is also fi ne to hav e USB nodes on the same network with Ether net nodes. How do I decide whether I need a USB adapter or Ethernet bridge as a node? It should be deter ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 27

    28 a. Using the HomePlug Ether net Br idge (Node Mode) (Several HomePlug Bridges can be used) Netw ork Confi guration ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 28

    29 Netw ork Confi guration b . Using the HomePlug USB Adapter AND Ether net Bridge (Node Mode) ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 29

    30 c. Using the HomePlug Ether net br idge to mak e a sub network HomePlug ready to communicate with the other HomePlug nodes. Netw ork Confi guration P owerline ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 30

    31 Netw ork Confi guration d. Using the HomePlug Ether net br idge to e xtend the WiFi network and eliminate dead spots. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 31

    32 Netw ork Confi guration e. Using Homeplug bridge to share Broadband Inter net access through the whole house. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 32

    33 Netw ork Confi guration f . Using the HomePlug Ether net bridge to play game remotely . ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 33

    34 Prior to installing HomePlug, you ma y hav e had some ideas about using your new netw or k. This section will help you get started on those ideas or ev en give y ou some new ones. It will go through the process of sharing fi les, printing from any computer on the netw ork, or accessing the Inter net on multiple computers with one connection. Pl ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 34

    35 1. Click “Next” in the window(right) for the Network Setup Wizard. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 35

    36 2. Read and follo w the instr uctions in the f ollowing window and then clic k “Ne xt”. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 36

    37 3. In the follo wing window , select among the 3 options which best describe this computer and then click “Ne xt”. If your computer connects to a broadband router/gatew ay , select the second Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 37

    38 4. Fill in the information in the follo wing window as y ou desire and then click “Ne xt”. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 38

    39 5. Enter the W or kgroup name as you wish and then clic k “Ne xt”. (V er y impor tant: All computers on your netw or k should hav e the same W or kgroup . Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 39

    40 6. Revie w the setting in the follo wing screen, and click “Ne xt” to contin ue. If you w ant to change any settings, y ou need to click “Back” and star t ov er again. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 40

    41 7. Please wait while the Network Setup Wizard applies the changes and confi gures the computer . Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 41

    42 8. When the confi guration is done, the f ollowing screen will come up . Select one of the 4 options according to your needs . (In this e xample, the last choice was selected.) Clic k “Ne xt. ” Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 42

    43 Netw orking Basics 9. Then click “Finish” on this ne xt window . ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 43

    44 10. The new setting will tak e eff ect after you restar t the computer . Click “Y es” to restar t the computer . Congratulations , you ha v e completed confi gur ing this computer! After setting up networks on all your computers on the network, you will be ab le to use your HomePlug network to share fi les, printers, and Internet connectio ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 44

    45 T opic 2: Checking IP ad- dresses in Windo ws XP/2000 Go to Star t>Programs>Accessories> Command Prompt. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 45

    46 1. T ype “ipconfi g” at the prompt, then press Enter . Y ou will see the IP address of this computer . Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 46

    47 T opic 3: Assigning a Static IP Address (Note: If you use DHCP-capab le gatew a y/router , you don’t need to assign any static IP addresses because the gatew ay/router will automatically assign IP ad- dresses to the computers on the network.) Go to Star t>Settings>Control P anel>Networ k Connections>Local Area Connection Right clic ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 47

    48 1. At the follo wing window , select “Use the f ollowing IP address:”, and fi ll in the desired IP address and subnet mask (it is recommended to use the def ault subnet mask as shown in the f ollowing window . Subnet mask must be the same f or all the computers on the network.) If you need to enter DNS address , you must enter the address o ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 48

    49 2.Click “Close” on the Local Area Connection Proper ties window . Y ou hav e completed static IP address assignment. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 49

    50 T opic 4. Sharing Disks/Folders Once the network has been check ed / confi gured, you can access other systems via “My Network Places”. T o allow other systems to access data on y our disks / in your f olders, you ha ve to giv e per mission to share your disks and/or f olders. 1. Select the disk (or the folder) to be shared (f or e xample i ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 50

    51 Netw orking Basics Once you ha ve selected the f older to be shared, r ight- click to select “sharing and security . ” ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 51

    52 Netw orking Basics 2. In the follo wing window , click to select “Share this f older”. Then click on “P er mission”. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 52

    53 Netw orking Basics 3. Please note that by def ault, all users defi ned on your XP Prof essional system will hav e full per missions. Y ou can reduce the per missions (f or example to allo w only Read-access) and/or you could add a diff erent group of users to ha ve access per mission (b ut then you should delete the group “Everyone” from th ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 53

    54 Netw orking Basics 4. Click OK on the original Shar ing and Security window to conclude the process . 5. Once a disk or folder is shared, the icon will show it via the “holding hand. ” ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 54

    55 Netw orking Basics T opic 5. Share Printers Y ou may no w share any installed print- ers connected to this computer with other computers on your netw or k. 1. Using the computer that has the printer already connected to it, go to: Star t > Control P anel > Pr inters and F ax es. Click on the printer y ou want to share with others on the ne ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 55

    56 2. In the follo wing window , click on “Share this Printer” and type in the share name you w ould like. After this is done, clic k on “Apply” and then “OK”. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 56

    57 Netw orking Basics Now when y ou go to “Printers and F ax es” in the Control P anel, you will see the sup- por ting hand under neath the printer , which means that the printer is being shared in the network. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 57

    58 Netw orking Basics F or a computer to access a Networ k Printer , the device driv er or software f or that printer must be installed and pointed to the proper location of the printer . This is done similarly to the wa y you installed the printer on the computer it is con- nected to . 1. Go to a computer that is not connected to the printer and s ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 58

    59 2. Click on “Add a pr inter”. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 59

    60 Netw orking Basics 3. Select the network pr inter option and click Ne xt. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 60

    61 4. Find the pr inter you w ould like to share and clic k Next. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 61

    62 Netw orking Basics Decide if you w ould like to choose this printer as a default printer and click Ne xt. ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 62

    63 Y ou hav e now added the printer to your computer , click Finish. Now y ou may use the Netw ork Printer as if it was directly con- nected to the computer . Make sure that the computer which is directly connected to the printer is on. Netw orking Basics ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 63

    64 T opic 6. Sharing Internet Access So how can the Internet connection be shared among other computers on the HomePlug network? Since neither the HomePlug Bridge nor USB Adapter are capable of routing at this time, a router is neces- sar y in order to share an Inter net connection. Future versions of the HomePlug Bridge or USB Adapter ma y feature ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 64

    65 Please f ollow these steps f or setting up Inter net Sharing: Sharing Internet Access ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 65

    66 Sharing Internet Access a. Make sure that the DSL/Cab le modem is connected to the Router (using the W AN por t on the router .) b . Connect the HomePlug Bridge to the Router (using the Uplink por t on the router .) c. Check the link light on the HomePlug Bridge. It must light up green. d. Make sure that the computers that need access to the Int ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 66

    67 Checking Router Settings: Please make sure that the f ollowing settings on y our router are set: (The setup windows will depend on the router man uf acturer’ s software.) A) The IP should be obtained automatically; B) DHCP must be enab led; C) Release DHCP and then Renew DHCP to reset the IP Ad dresses. It is recom- mended that y ou verify tha ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 67

    68 Frequently Asked Questions Frequently Asked Questions/T r oubleshooting 1. Will HomePlug work in my house or apar tment? If the house or apar tment was b uilt under U .S. building standards using copper wiring, then it will work. 2. What types of security problems will I be f acing? If your house is on the same po wer grid as your neighbor , the ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 68

    69 network. Node mode operates b y connecting the Ether net br idge (GHPB42W6) to one computer (ONL Y) and installing drivers onto the computer , allowing it to set the de vice into Node Mode. The advantage with Node Mode operation is there is no limitation to the number of nodes that can oper ate on a HomePlug network. 5. Will HomePlug operate on ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 69

    70 7. What OS does the HomePlug utility software fully suppor t? Windows 98SE, ME, XP , and 2000. Windows NT and Mac are only suppor ted by the HomePlug Ethernet Bridge (Without installing the HomePlug software with def ault operating mode as BRIDGE, not NODE) 8. What is the Range of HomePlug? Appro ximately 990 feet (300 meters) in w all pow er li ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 70

    71 T o help IOGEAR® customers obtain the highest lev el of perf or mance from their HomePlug de vices, the IOGEAR® Ser vice Suppor t team is av ailable to ans wer y our technical ques- tions. Do not hesitate to call if y ou are having troub le getting your de vice to work correctly . IOGEAR® Ser vice Suppor t can be reached by phone from 9am to ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 71

    72 T echnical Support 1) What is the purchase date and serial number of the product? 2) W ere any messages displa yed on the screen when the error occurred? If so , what was the e xact wording of the message? 3) What type of Computer are you using? 4) When does the problem occur? 5) Can the problem be reproduced? If so , what are the steps necessar ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 72

    73 Specifi cations ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 73

    74 Limited W arranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY FOR DIRECT , INDIRECT , SPECIAL, INCI- DENT AL OR CONSEQUENTIAL D AMA GES RESUL TING FR OM THE USE OF THE PRODUCT , DISK, OR ITS DOCUMENT A TION EXCEED THE PRICE P AID FOR THE PRODUCT . The direct v endor makes no w arranty or representation, e xpressed, implied, or statutor y w ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 74

    75 Radio & TV Interference Statement W ARNING!!! This equipment generates , uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, ma y cause interf erence to radio communications. This equipment has been tested and f ound to comply with the limits for a Class B computing de vice pu ...

  • IOGear HomePlug to Ethernet Bridge GHPB42 - page 75

    23 Hubb le • Ir vine, CA 92618 • (P) 949.453.8782 • (F) 949.453.8785 • www .iogear .com Contact inf o. ...

Manufacturer IOGear Category Switch

Documents that we receive from a manufacturer of a IOGear HomePlug to Ethernet Bridge GHPB42 can be divided into several groups. They are, among others:
- IOGear technical drawings
- HomePlug to Ethernet Bridge GHPB42 manuals
- IOGear product data sheets
- information booklets
- or energy labels IOGear HomePlug to Ethernet Bridge GHPB42
All of them are important, but the most important information from the point of view of use of the device are in the user manual IOGear HomePlug to Ethernet Bridge GHPB42.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals IOGear HomePlug to Ethernet Bridge GHPB42, service manual, brief instructions and user manuals IOGear HomePlug to Ethernet Bridge GHPB42. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product IOGear HomePlug to Ethernet Bridge GHPB42.

Similar manuals

A complete manual for the device IOGear HomePlug to Ethernet Bridge GHPB42, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use IOGear HomePlug to Ethernet Bridge GHPB42 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of IOGear HomePlug to Ethernet Bridge GHPB42.

A complete IOGear manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual IOGear HomePlug to Ethernet Bridge GHPB42 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the IOGear HomePlug to Ethernet Bridge GHPB42, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the IOGear HomePlug to Ethernet Bridge GHPB42, that we can find in the current document
3. Tips how to use the basic functions of the device IOGear HomePlug to Ethernet Bridge GHPB42 - which should help us in our first steps of using IOGear HomePlug to Ethernet Bridge GHPB42
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with IOGear HomePlug to Ethernet Bridge GHPB42
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of IOGear HomePlug to Ethernet Bridge GHPB42 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning IOGear HomePlug to Ethernet Bridge GHPB42?

Use the form below

If you did not solve your problem by using a manual IOGear HomePlug to Ethernet Bridge GHPB42, ask a question using the form below. If a user had a similar problem with IOGear HomePlug to Ethernet Bridge GHPB42 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)