English dropdown-ico

Manual Gigabyte GA-880GM-USB3

100 pages Not applicable
Download

Go to site of 100

Summary
  • Gigabyte GA-880GM-USB3 - page 1

    GA-880GM-USB3 User's Manual Rev . 3101 12ME-88GMUB3-3101R ...

  • Gigabyte GA-880GM-USB3 - page 2

    Motherboard GA-880GM-USB3 Mar . 5, 2011 Mar. 5, 201 1 Motherboard GA-880GM-USB3 ...

  • Gigabyte GA-880GM-USB3 - page 3

    Copyright © 201 1 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specications and features in this manual may be made by GIGABYTE wi ...

  • Gigabyte GA-880GM-USB3 - page 4

    - 4 - T able of Contents Box Contents ................................................................................................................... 6 Optional Items ................................................................................................................. 6 GA-880GM-USB3 Motherboard Layout .............................. ...

  • Gigabyte GA-880GM-USB3 - page 5

    - 5 - Chapter 3 Drivers Installation ........................................................................................ 57 3-1 Installing Chipset Drivers ............................................................................... 57 3-2 Application Software .................................................................................. ...

  • Gigabyte GA-880GM-USB3 - page 6

    - 6 - Box Contents GA-880GM-USB3 motherboard Motherboard driver disk User's Manual Quick Installation Guide T wo SA T A 3Gb/s cables I/O Shield Optional Items 2-port USB 2.0 bracket (Part No. 12CR1-1UB030-5*R) 2-port IEEE 1394a bracket (Part No. 12CF1-1IE008-0*R) 2-port SA T A power cable (Part No. 12CF1-2SERPW-0*R) COM port cable (Part No. 12 ...

  • Gigabyte GA-880GM-USB3 - page 7

    - 7 - GA-880GM-USB3 Motherboard Layout KB_MS_USB CPU_F AN A TX GA-880GM-USB3 F_AUDIO AUDIO SPDIF_OUT PCIEX1 DDR3_1 DDR3_2 A TX_12V_2X4 AMD 880G AMD SB710 SA TA2_3 SA TA2_0 SA TA2_4 SA TA2_2 SA TA2_1 PCI1 DVI VGA CODEC USB30 LAN PCI2 CLR_CMOS BA T M_BIOS F_P ANEL COM Realtek RTL81 1 1E B_BIOS IT8720 TSB43AB23 SYS_F AN PCIEX16 ESA TA 1394 USB F_1394_ ...

  • Gigabyte GA-880GM-USB3 - page 8

    - 8 - GA-880GM-USB3 Motherboard Block Diagram (Note 1) T o reach DDR3 1800 MHz or above, you must install two memory modules and install them in the DDR3_3 and DDR3_4 memory sockets. (Note 2) Simultaneous output for DVI-D and HDMI is not supported. Hyper T ransport 3.0 AMD 880G CPU CLK+/- (200 MHz) Dual Channel Memory Center/Subwoofer Speaker Out L ...

  • Gigabyte GA-880GM-USB3 - page 9

    - 9 - Hardware Installation 1- 1 Installation Precautions Th e m ot her bo ar d c on ta in s n um er ou s d el ic at e e le ct ro ni c c ir cu it s a nd comp one nt s w hi ch can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prio r to ins ...

  • Gigabyte GA-880GM-USB3 - page 10

    Hardware Installation - 10 - 1- 2 Product Specications CPU AM3+ Socket:  - AMD AM3+ processor - AMD AM3 Phenom ™ II processor/ AMD Athlon ™ II processor (Go to GIGABYTE's website for the latest CPU support list.) Hyper Transport Bus 520 0 MT/s  Chipset North Bridge: AMD 880G  South Bridge: AMD SB710  Memory 4 x 1.5V DDR3 DIM ...

  • Gigabyte GA-880GM-USB3 - page 11

    - 1 1 - Hardware Installation USB South Bridge:  - Up to 10 USB 2.0/1.1 ports (4 on the back panel, 6 via the USB brackets connected to the internal USB headers) Etron EJ168 chip:  - Up to 2 USB 3.0/2.0 ports on the back panel IEEE 139 4 T .I. TSB43AB23 chip:  - Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket co ...

  • Gigabyte GA-880GM-USB3 - page 12

    Hardware Installation - 12 - BIOS 2 x 16 Mbit ash  Use of licensed AW ARD BIOS  Support for DualBIOS  ™ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b  Uni que Feat ure s Support for @BIOS  Support for Q-Flash  Support for Xpress BIOS Rescue  Support for Download Center  Support for Xpress Install  Support for Xpress Reco ...

  • Gigabyte GA-880GM-USB3 - page 13

    - 13 - Hardware Installation 1-3 Installing the CPU and C PU Cooler 1-3 -1 I nst all ing t he CPU A. Locate the pin one (denoted by a small triangle) of the CPU socket and the CPU. Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest ...

  • Gigabyte GA-880GM-USB3 - page 14

    Hardware Installation - 14 - B. Follow the steps below to correctly install the CPU into the motherboard CPU socket. • Before installing the CPU, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the CPU. • Do not force the CPU into the CPU socket. The CPU cannot t in if oriented in ...

  • Gigabyte GA-880GM-USB3 - page 15

    - 15 - Hardware Installation 1-3 -2 I nst all ing t he CPU Cool er Follow the steps below to correctly install the CPU cooler on the CPU. (The following procedure uses the GIGABYTE cooler as the example.) Step 1: Apply an even and thin layer of thermal grease on the surface of the installed CPU. Step 2: Place the CPU cooler on the CPU. Step 3: Ho o ...

  • Gigabyte GA-880GM-USB3 - page 16

    Hardware Installation - 16 - 1- 4 Installing the Memor y DDR3_1 DDR3_2 DDR3_3 DDR3_4 Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used. (Go to GIGABYTE's website for the latest suppor ...

  • Gigabyte GA-880GM-USB3 - page 17

    - 17 - Hardware Installation 1- 4 -2 Inst all ing a M emo r y Notch Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs. Be sure to install DDR3 DIMMs on this motherboard. DDR3 D ...

  • Gigabyte GA-880GM-USB3 - page 18

    Hardware Installation - 18 - 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card. • Always turn off the computer and unplug the power cord from the power outlet before in ...

  • Gigabyte GA-880GM-USB3 - page 19

    - 19 - Hardware Installation 1-6 Setup of the A TI Hybrid CrossF ireX ™ Conguration Combining the onboard GPU with a discrete graphics card, A TI Hybrid CrossFireX can provide signicantly advanced display performance for AMD platform. Read the following instructions on conguring an A TI Hybrid CrossFireX system. A. System Requirements - ...

  • Gigabyte GA-880GM-USB3 - page 20

    Hardware Installation - 20 - 1- 7 Back Panel Con nectors In Windows Vista, select Start>Control Panel>Sound, select Realtek HDMI Output and then click Set Default . (Note 1) The DVI-D port does not support D-Sub connection by adapter. (Note 2) Simultaneous output for DVI-D and HDMI is not supported. • After installing the HDMI device, ma ...

  • Gigabyte GA-880GM-USB3 - page 21

    - 21 - Hardware Installation A. Dual Display Congurations: This motherboard provides three ports for video output: DVI-D, HDMI and D-Sub. The table below shows the supported dual display congurations. • When removing the cable connected to a back panel connector, rst remove the cable from your device and then remove it from the mother ...

  • Gigabyte GA-880GM-USB3 - page 22

    Hardware Installation - 22 - In addition to the default speak ers settings, the ~ audio jacks can be recongured to perform differe nt fun ctio ns via the au dio so ftwa re. On ly mic roph ones s till M UST be co nnect ed to t he default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio con- guration in Chapt ...

  • Gigabyte GA-880GM-USB3 - page 23

    - 23 - Hardware Installation 1-8 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Befor e ins tall ing th e dev ices, be sur e to tu rn off th e devi ces a nd you r com puter. Unplu g the power cord from the power ...

  • Gigabyte GA-880GM-USB3 - page 24

    Hardware Installation - 24 - DEBUG PO RT G.QBOFM A TX_12V_2X4 4 1 8 5 1/2) A TX_12V_2X4/A TX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the com- ponents on the motherboard. Before connecting the power connector, rst make sure the power supply ...

  • Gigabyte GA-880GM-USB3 - page 25

    - 25 - Hardware Installation 3/4) CPU_F AN/SYS_F AN (Fan Headers) The motherboard has a 4-pin CPU fan header (CPU_F AN)and a 4-pin system fan header(SYS_F AN). Each fan header supplies a +12V power voltage and possesses a foolproof insertion design. When con- necting a fan cable, be sure to connect it in the correct orientation. Most fans are desig ...

  • Gigabyte GA-880GM-USB3 - page 26

    Hardware Installation - 26 - 6) SA T A2_0/1/2/3/4 (SA T A 3Gb/s Connectors, Controlled by AMD SB710 South Bridge) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA TA 1.5Gb/s standard. Each SA T A connector supports a single SA TA device. The AMD SB710 South Bridge supports RAID 0, RAID 1, RAID 10, and JBOD. Refer to ...

  • Gigabyte GA-880GM-USB3 - page 27

    - 27 - Hardware Installation 8) F_P ANEL (Front Panel Header) Co nnect the pow er swi tch, r eset s witch , spea ker, ch assi s intr usion switc h/sen sor an d syst em stat us indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables. • PW (Power Switch, Red): ...

  • Gigabyte GA-880GM-USB3 - page 28

    Hardware Installation - 28 - 9) F_AUDIO (Front Panel Audio Header) The fron t panel audio header supports Intel Hig h Denition audio (HD) and AC'97 audio. Y o u may connect your chassis front panel audio module to this header. Make sure the wire assignments of the module con - nector match the pin assignments of the motherboard header. Inco ...

  • Gigabyte GA-880GM-USB3 - page 29

    - 29 - Hardware Installation 1 1) F_USB1/F_USB2/F_USB3 (USB Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . • Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header . • Prio ...

  • Gigabyte GA-880GM-USB3 - page 30

    Hardware Installation - 30 - 13) COM (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the op- tional COM port cable, please contact the local dealer . 10 9 2 1 Pin No. Denition 1 NDCD- 2 NSIN 3 NSOUT 4 NDTR- 5 GND 6 NDSR- 7 NRTS- 8 NCTS- 9 NRI- 10 No Pin ...

  • Gigabyte GA-880GM-USB3 - page 31

    - 31 - BIOS Setup BIOS (Ba sic Inpu t and Out put Syst em) reco rds hard ware par ameters of the sy stem in t he CMOS o n the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving sy stem param eters and l oading op erating sy stem, etc . BIOS incl udes a BIO S Setup pro gram that allows th ...

  • Gigabyte GA-880GM-USB3 - page 32

    BIOS Setup - 32 - Motherboard Model BIOS V ersion Award Modular BIOS v6.00PG, An Energy Star Ally Copyright (C) 1984-201 1, Award Software, Inc. GA-880GM-USB3 DE . . . . <DEL>: BIOS Setup <F9>: XpressRecovery2 <F12>: Boot Menu <End>: Qash 02/15/201 1-RS880-SB710-7A66BG0PC-00 Function Keys SA T A Mode Message: "SA T A ...

  • Gigabyte GA-880GM-USB3 - page 33

    - 33 - BIOS Setup Function Keys: <T AB>: POST SCREEN Press the <T ab> key to show the BIOS POST screen. T o show the BIOS POST screen at system start- up, refer to the instructions on the Full Screen LOGO Show item on page 45. <DEL>: BIOS SETUP Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BI ...

  • Gigabyte GA-880GM-USB3 - page 34

    BIOS Setup - 34 - 2-2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use ar- row keys to move among the items and press <Enter> to accept or enter a sub-menu. (Sample BIOS V ersion: D3c) Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom ...

  • Gigabyte GA-880GM-USB3 - page 35

    - 35 - BIOS Setup  The Functions of the <F1 1> and <F12> keys (For the Main Menu Only)  F1 1: Save CMOS to BIOS This function allows you to save the current BIOS settings to a prole. Y ou can create up to 8 proles (Prole 1-8) and name each prole. First enter the prole name (to erase the default prole name, use ...

  • Gigabyte GA-880GM-USB3 - page 36

    BIOS Setup - 36 - 2-3 MB Intelligent T weaker(M.I.T .) • Whether the system will work stably with the overclock/overvoltage settings you made is depen - dent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is f ...

  • Gigabyte GA-880GM-USB3 - page 37

    - 37 - BIOS Setup CMOS Setup Utility-Copyright (C) 1984-2011 A ward Software IGXConguration higf : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: General Help F5: Previous V alues F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level   InternalGraphicsMode   [UMA]  UMAFrameBuf fer ...

  • Gigabyte GA-880GM-USB3 - page 38

    BIOS Setup - 38 - CPU Clock Ratio Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being used. CPU NorthBridge Freq. Allows you to alter the North Bridge controller frequency for the installed CPU. The adjustable range is dependent on the CPU being used. Core Performance Boost (Note) A llo ws y ...

  • Gigabyte GA-880GM-USB3 - page 39

    - 39 - BIOS Setup DCT s Mode Allows you to set memory control mode. Ganged Sets memory control mode to single dual-channel. Unganged Sets memory control mode to two single-channel. (Default) DDR3 Timing Items Manual allows all DDR3 Timing items below to be congurable. Options are: Auto (default), Manual. 1T/2T Command Timing Options are: Auto (d ...

  • Gigabyte GA-880GM-USB3 - page 40

    BIOS Setup - 40 - ******** System V oltage Optimized ******** System V oltage Control De ter min es wh eth er to m anu all y set t he sy ste m vol tag es. Auto l ets t he BI OS au tom ati call y set the system voltages as required. Manual allows all voltage control items below to be congurable. (Default: Auto) DDR3 V oltage Control Allows you to ...

  • Gigabyte GA-880GM-USB3 - page 41

    - 41 - BIOS Setup Date (mm:dd:yy) Sets the system date. The date format is week (read-only), month, date and year . Select the desired eld and use the up arrow or down arrow key to set the date. Time (hh:mm:ss) Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired eld and use the up arrow or down arrow key to set the time. I ...

  • Gigabyte GA-880GM-USB3 - page 42

    BIOS Setup - 42 - Halt On Allows you to determine whether the system will stop for an error during the POST . All Errors Whenever the BIOS detects a non-fatal error the system boot will stop. No Errors The system boot will not stop for any error. All, But Keyboard The system boot will not stop for a keyboard error but stop for all other errors. (De ...

  • Gigabyte GA-880GM-USB3 - page 43

    - 43 - BIOS Setup 2-5 Advanced BIOS Features IGX Conguration The settings in this submenu are synchronous to those under the same items on the MB Intelligent T weaker(M.I.T .) main menu. AMD C1E Support Enables or disables the C1E CPU power-saving function in system halt state. When enabled, the power consumption will be reduced during system ha ...

  • Gigabyte GA-880GM-USB3 - page 44

    BIOS Setup - 44 - (Note) This item is present only when you install a CPU that supports this feature. Virtualization Virtualization allows a platform to run multiple operating systems and applications in independent parti- tions. With virtualization, one computer system can function as multiple virtual systems. (Default: Disabled) AMD K8 Cool&Q ...

  • Gigabyte GA-880GM-USB3 - page 45

    - 45 - BIOS Setup HDD S.M.A.R.T . Capability Enables or disables the S.M.A.R.T . (Self Monitoring and Reporting T echnology) capability of your hard drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed. (Default: Disabled) Away Mode Enable ...

  • Gigabyte GA-880GM-USB3 - page 46

    BIOS Setup - 46 - 2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2011 A ward Software Integrated Peripherals  OnChipSA T A Controller  [Enabled]  OnChipSA T A T ype   [NativeIDE] x OnChip SA T A Port4/5 Type IDE x OnChip SA T A Port as ESP Press Enter  OnboardLANFunction   [Ena ...

  • Gigabyte GA-880GM-USB3 - page 47

    - 47 - BIOS Setup Port0 as ESP/Port1 as ESP/Port2 as ESP/Port3 as ESP This option is congurable only when OnChip SA T A T ype is set to AHCI . Enabled will speed up the hot plug detection of the connected SA T A device. (Default: Disabled) Port4 as ESP/Port5 as ESP Th is o pti on is c onf igu rab le on ly wh en O nCh ip SAT A T yp e is s et to A ...

  • Gigabyte GA-880GM-USB3 - page 48

    BIOS Setup - 48 - Start detecting at Port.....  LinkDetected-->100Mbps  CableLength= 30m Link Detected Displays transmission speed. Cable Length Displays the approximate length of the attached LAN cable. Note: The Gigabit hub will only operate at a speed of 10/100 Mbps in MS-DOS mode; it will operate at a normal speed of 10/ ...

  • Gigabyte GA-880GM-USB3 - page 49

    - 49 - BIOS Setup ACPI Suspend T ype Species the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode. The system can be resumed at any time. S3(STR) Enables the system to enter the ACPI S3 (Su ...

  • Gigabyte GA-880GM-USB3 - page 50

    BIOS Setup - 50 - (Note) Supported on Windows 7/Vista operating system only . HPET Support (Note) Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system. (Default: Enabled) Power On By Mouse Allows the system to be turned on by a PS/2 mouse wake-up event. Note: T o use this function, you need an A TX power supply ...

  • Gigabyte GA-880GM-USB3 - page 51

    - 51 - BIOS Setup PCI1 IRQ Assignment Auto BIOS auto-assigns IRQ to the rst PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the rst PCI slot. PCI2 IRQ Assignment Auto BIOS auto-assigns IRQ to the second PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the second PCI ...

  • Gigabyte GA-880GM-USB3 - page 52

    BIOS Setup - 52 - Hardware Thermal Control Enables or disables the CPU overheating protection function. When enabled, the CPU core voltage and ratio will be reduced when the CPU is overheated. (Default: Enabled) Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intr ...

  • Gigabyte GA-880GM-USB3 - page 53

    - 53 - BIOS Setup CPU Smart F AN Control Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. Y ou can adjust the fan speed with EasyTune based on system requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled) CPU Smart F AN Mode Speci ...

  • Gigabyte GA-880GM-USB3 - page 54

    BIOS Setup - 54 - Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard. 2-10 Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2011 A war ...

  • Gigabyte GA-880GM-USB3 - page 55

    - 55 - BIOS Setup Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will be requested to conrm the password. T ype the password again and press <Enter>. The BIOS Setup program allows you to specify two separate passwords: Supervisor Password When a system password is set and t ...

  • Gigabyte GA-880GM-USB3 - page 56

    BIOS Setup - 56 - Press <Enter> on this item and press the <Y> key . This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu. 2-13 Save & Exit Setup Press <Enter> on this item and press the <Y> key. This exits the BIOS Setup without saving ...

  • Gigabyte GA-880GM-USB3 - page 57

    - 57 - Drivers Installation 3-1 Installing Chipset Drivers Chapter 3 Drivers Installation After inserting the driver disk, "Xpress Install" will automatically scan your system and then list all the drivers that are recommended to install. Y ou can click the Install All button and "Xpress Install" will install all the rec- ommend ...

  • Gigabyte GA-880GM-USB3 - page 58

    Drivers Installation - 58 - 3-2 Application Software This page displays all the utilities and applications that GIGABYTE develops and some free software. Y ou can click the Install button on the right of an item to install it. 3-3 T echnical Manuals This page provides GIGABYTE's application guides, content descriptions for this driver disk, an ...

  • Gigabyte GA-880GM-USB3 - page 59

    - 59 - Drivers Installation 3-4 Contact For the detailed contact information of the GIGABYTE T aiwan headquarter or worldwide branch ofces, click the URL on this page to link to the GIGABYTE website. 3-5 System This page provides the basic system information. ...

  • Gigabyte GA-880GM-USB3 - page 60

    Drivers Installation - 60 - 3-6 Download Center T o update the BIO S, drivers, or applications, click the Download Ce nter button to link to t he GIGABYTE website. The latest version of the BIOS, drivers, or applications will be displayed. 3-7 New Utilities This page provides a quick link to GIGABYTE's lately developed utilities for users to i ...

  • Gigabyte GA-880GM-USB3 - page 61

    - 61 - Unique Features 4-1 Xpress Recovery2 Chapter 4 Unique Features Xp r es s R e co v er y 2 i s a u ti l it y t h at a l l ow s y ou to q u ic k l y co m p re s s an d back up your system data and perform restoration of it. Supporting NTFS, F A T32, and F A T16 le systems, Xpress Recovery2 can back up data on P A T A and SA T A hard drives a ...

  • Gigabyte GA-880GM-USB3 - page 62

    Unique Features - 62 - Step 3: Wh e n pa r ti t io n in g y o ur h a rd d r i ve , m ak e s ur e t o leave unallocated space (10 GB or more is recom- mended; actual size requirements vary , depending on the amount of data) and begin the installation of the operating system. Step 4: After the operating system is installed, click Start , right-click ...

  • Gigabyte GA-880GM-USB3 - page 63

    - 63 - Unique Features D. Using the Restore Function in Xpress Recovery2 E. Removing the Backup F . Exiting Xpress Recovery2 Sel ec t RESTORE to re st or e th e ba ck up t o yo ur h ar d dr ive in case the system breaks down. The RESTORE option will not be present if no backup is created before. Select REBOOT to exit Xpress Recovery2. Step 2: After ...

  • Gigabyte GA-880GM-USB3 - page 64

    Unique Features - 64 - 4-2 BIOS Update Utilities GI GA B YT E m ot h er b oa r ds p r ov i de t w o un i qu e B IO S u pd a te t o ol s , Q- F la s h ™ an d @ BI O S ™ . GI G AB Y TE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mod e. Ad dit ion all y , t his m ot her boa rd fe atu res t he ...

  • Gigabyte GA-880GM-USB3 - page 65

    - 65 - Unique Features B. Updating the BIOS When updatin g the BIOS, ch oose the loc ation where t he BIOS le is saved. The followi ng procedure as - sumes that you save the BIOS le to a USB ash drive. Step 1: 1. Insert the USB ash drive containing the BIOS le into the computer . In the main menu of Q-Flash, use the up or down arrow ...

  • Gigabyte GA-880GM-USB3 - page 66

    Unique Features - 66 - Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system. As the system boots, you should see the new BIOS version is present on the POST screen. Step 5: During the POST , press <Delete> to enter BIOS Setup. Select Load Optimized Defaults and press <Enter> to load BIOS defaults. Syste ...

  • Gigabyte GA-880GM-USB3 - page 67

    - 67 - Unique Features 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update. 2. During the BIOS upd ate proc ess, ens ure the I nterne t connec tion is s table an d do NOT inte rr ...

  • Gigabyte GA-880GM-USB3 - page 68

    Unique Features - 68 - 4-3 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment. The user-friendly EasyTune 6 interface also includes tabbed pages for CPU and memory information, letting users read their system-related in ...

  • Gigabyte GA-880GM-USB3 - page 69

    - 69 - Unique Features 4-4 Easy Energy Saver GIGABYTE Easy Energy Saver is a revolutionary technology that delivers unparalleled power savings with a click of the button. Featuring an advanced proprietary software design, GIGABYTE Easy Energy Saver is able to provide exceptional power savings and enhanced power efciency without sacricing comp ...

  • Gigabyte GA-880GM-USB3 - page 70

    Unique Features - 70 - C. Stealth Mode In Stealth Mode, the system continues t o work with the user-dened power saving settings, even after the system is restarted. Re-enter the application only if you want to make any changes or completely close the application. (Note 1) Maximize system power saving with Dynamic CPU Frequency Function; system p ...

  • Gigabyte GA-880GM-USB3 - page 71

    - 71 - Unique Features 4-5 Q-Share Q-Share is an easy and convenient data sharing too l. After conguring your LAN connection settings and Q-Share, you are able to share your data with computers on the same network, making full use of Internet resources. Directions for using Q-Share After installing Q-Share from the motherboard driver disk, go to ...

  • Gigabyte GA-880GM-USB3 - page 72

    Unique Features - 72 - 4-6 SMART Recovery With SMART Recovery , users can quickly create backups of changed data les (Note 1) or copy les from a spe - cic backup on P A T A and SA T A hard drives (partitioned on NTFS le system) in Windows Vista. Instructions for copying les/folders from a backup: T o b r ow se t hr ou g h yo ur b a c ...

  • Gigabyte GA-880GM-USB3 - page 73

    - 73 - Unique Features 4-7 Auto Green Auto Green is an easy-to-use tool that provides users with simple options to enable system power savings via a Bluetooth cell phone. When the phone is out of the range of the computer's Bluetooth receiver , the sys- tem will enter the specied power saving mode. Sele cting a sy stem e ner gy s aving mode ...

  • Gigabyte GA-880GM-USB3 - page 74

    Unique Features - 74 - 4-8 Cloud OC Cloud OC (Note 1) is an easy-to-use overclocking utility designed for system overclock- ing via virtually any Internet-conn ected device, such as a smart pho ne, iPhone, note - book PC, etc. By simply connecting to an Internet browser via LAN, wireless LAN, or Bluetooth (Note 2) and logging in to the Cloud OC ser ...

  • Gigabyte GA-880GM-USB3 - page 75

    - 75 - Appendix Chapter 5 Appendix 5-1 Conguring SA T A Hard Drive(s) T o congure SA T A hard drive(s), follow the steps below: A. Install SA T A hard drive(s) in your computer . B. Congure SA T A controller mode in BIOS Setup. C. Congure a RAID array in RAID BIOS. (Note 1) D. Make a oppy disk containing the SA T A RAID/AHCI driver f ...

  • Gigabyte GA-880GM-USB3 - page 76

    Appendix - 76 - B. Conguring SA T A controller mode in BIOS Setup Make sure to congure the SA T A controller mode correctly in system BIOS Setup. Step 1: Turn on your comp uter an d press < Delete> to enter BIOS Setu p durin g the POS T (Power-On Self-T est). En s u r e O n C h i p S AT A C on t r o l l e r i s e n a b l e d u n d e r I ...

  • Gigabyte GA-880GM-USB3 - page 77

    - 77 - Appendix C. Conguring RAID set in RAID BIOS Enter the RAID BIOS setup utility to congure a RAID array . Skip this step and proceed with the installation of Windows operating system for a non-RAID conguration. Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Pr ...

  • Gigabyte GA-880GM-USB3 - page 78

    Appendix - 78 - Create Arrays Manually T o create a new array , press <2> to enter the LD View Menu window (Figure 4). T o create an array, press <Ctrl+C> to access the LD Dene Menu . In the LD Dene Menu , use the up or down arrow key to move to an item for further conguration (Figure 5). Figure 4 Figure 5 Option ROM Utility (c ...

  • Gigabyte GA-880GM-USB3 - page 79

    - 79 - Appendix In the following procedure, we'll create RAID 0 as an example. 1. Under the RAID Mode section, press the <SP ACE> key to select RAID 0 . 2. Set the Stripe Block size. 64 KB is the default. 3. Under the Drives Assignments section, press the up or down arrow key to highlight a drive. 4. Press the <SP ACE> key or <Y ...

  • Gigabyte GA-880GM-USB3 - page 80

    Appendix - 80 - Delete an Array The Delete Array menu option allows for deletion of disk array assignments. Deleting an existing disk array could result in loss of data. Record all array information including the array type, the disk members, and stripe block size in case you wish to undo a deletion. 1. T o delete an array , press <3> in the ...

  • Gigabyte GA-880GM-USB3 - page 81

    - 81 - Appendix 5-1-2 Installing the SA T A RAID/AHCI Driver and Operating System With the correct BIOS settings, you are ready to install Windows 7/Vista/XP onto your hard drive(s). A. Installing Windows XP T o install Windows XP , you need to install the SA T A RAID/AHCI controller driver during the OS installation. Without the driver , the hard ...

  • Gigabyte GA-880GM-USB3 - page 82

    Appendix - 82 - B. Installing Windows 7/Vista The procedure below assumes that only one RAID array exists in your system. Step 1: Restar t your s ystem to boot f rom th e Windo ws 7 set up disk and per form st andar d OS ins tallat ion st eps. When a screen similar to that below appears (RAID hard drive will not be detected at this stage), select L ...

  • Gigabyte GA-880GM-USB3 - page 83

    - 83 - Appendix Step 3: When a screen as shown in Figure 4 appears, select AMD AHCI Compatible RAID Controller and click Next . Step 4: After the driver is loaded, the RAID drive will appear . Select the RAID drive and then click Next to continue the OS installation (Figure 5). Figure 4 Figure 5 ...

  • Gigabyte GA-880GM-USB3 - page 84

    Appendix - 84 - Rebuilding an Array: Rebuilding is the process of restoring data to a hard drive from other drives in the array . Rebuilding applies only to fault-tolerant arrays such as RAID 1, or RAID 10. T o replace the old drive, make sure to use a new drive of equal or greater capacity . The procedures below assume a new drive is added to repl ...

  • Gigabyte GA-880GM-USB3 - page 85

    - 85 - Appendix 5-2-1 Conguring 2/4/5.1/7.1-Channel Audio The motherboard provides six aud io jacks on the back pan el w hi ch s upp or t 2/ 4/ 5.1 /7 .1 -ch an ne l (Note) au dio . The picture to the right shows the default audio jack assignments. The integrated HD (High Definition) audio provides jack retasking capability that allows the user ...

  • Gigabyte GA-880GM-USB3 - page 86

    Appendix - 86 - Step 2: Connect an audio device to an audio jack. The The cur- rent connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers s creen, click t he Spe aker Co ngura - tion tab. In the Speaker Conguration list, select Stereo , Quadraphonic , 5.1 ...

  • Gigabyte GA-880GM-USB3 - page 87

    - 87 - Appendix 5-2-2 Conguring S/PDIF Out The S/PDIF Out jack (Note 1) can transmit audio signals to an external decoder for decoding to get the best au- dio quality . 1. Connecting a S/PDIF Out Cable: Connect a S/PDIF optical cable to an external decoder for transmitting the S/PDIF digital audio signals. S/PDIF Optical Cable (Note 1) The actua ...

  • Gigabyte GA-880GM-USB3 - page 88

    Appendix - 88 - 5-2-3 Enabling the Dolby Home Theater Function Before D olby Hom e Theater is enabled , you get o nly 2-c hannel p layback output ( from the front speakers) when playing 2-channel stereo sources. Y ou must play 4-, 5.1-, or 7.1- chan- nel content to get 4-, 5.1-, or 7.1- channel audio effects. With Dolby Home Theater enabled, 2-chan ...

  • Gigabyte GA-880GM-USB3 - page 89

    - 89 - Appendix 5-2-4 Conguring Microphone Recording Step 2: Connect your microphone to the Mic in jack (pink) on th e ba c k pa ne l o r th e M ic i n j ac k ( pi nk ) o n th e f ro nt panel. Then congure the jack for microphone function - ality . Note: The microphone functions on the front panel and back panel cannot be used at the same tim ...

  • Gigabyte GA-880GM-USB3 - page 90

    Appendix - 90 - Step 5: After co mpletin g the set tings a bove, cl ick Start , p oint to All Programs , point to Accessories , and then click Sound Recorder to begin the sound recording. Step 1: Loca te t he i con in th e not ifi cati on a rea a nd ri ght - click on this icon. Select Recording Devices . Step 2: On the Recording tab, ri ght-click o ...

  • Gigabyte GA-880GM-USB3 - page 91

    - 91 - Appendix Step 4: Now you can access the HD Audio Manager to cong - ure Stereo Mix and use Sound Recorder to record the sound. 5-2-5 Using the Sound Recorder A. Recording Sound 1. Make sure you have connected the sound input device (e.g. microphone) to the computer. 2. T o record the audio, click the Start Recording button . 3. T o stop re ...

  • Gigabyte GA-880GM-USB3 - page 92

    Appendix - 92 - 5-3 T roubleshooting 5-3-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support & DownloadsF AQ page on GIGABYTE's website. Q: In the BIOS Setup program, why are some BIOS options missing? A: Some advanced options are hidden in the BIOS Setup program. Press <Delete> to enter B ...

  • Gigabyte GA-880GM-USB3 - page 93

    - 93 - Appendix 5-3-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn off the power . Remove all peripherals, connecting cables, and power cord etc. Isolate the short circuit. Secure the CPU cooler on the CPU. Connect the CPU cooler power ...

  • Gigabyte GA-880GM-USB3 - page 94

    Appendix - 94 - The power supply , CPU or CPU socket might fail. The keyboard or keyboard connector might fail. END A Turn off the computer . Plug in the keyboard and mouse and restart the computer . The graphics card, expansion slot, or monitor might fail. The IDE/SA TA device, connector , or cable might fail. No The problem is veried and solve ...

  • Gigabyte GA-880GM-USB3 - page 95

    - 95 - Appendix ...

  • Gigabyte GA-880GM-USB3 - page 96

    Appendix - 96 - ...

  • Gigabyte GA-880GM-USB3 - page 97

    - 97 - Appendix ...

  • Gigabyte GA-880GM-USB3 - page 98

    Appendix - 98 - ...

  • Gigabyte GA-880GM-USB3 - page 99

    - 99 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .gigabyte.com WEB address (Chinese): http://www .gig ...

  • Gigabyte GA-880GM-USB3 - page 100

    Appendix - 100 - • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .gigabyte.de • G.B.T . TECH. CO., L TD. - U.K. WEB address : http://www .giga-byte.co.uk • Giga-Byte Technology B.V . - The Netherlands WEB address : http://www .giga-byte.nl • GIGABYTE TECHNOLOGY FRANCE - France WEB address : http://www .gigabyte.fr • S ...

Manufacturer Gigabyte Category Motherboard

Documents that we receive from a manufacturer of a Gigabyte GA-880GM-USB3 can be divided into several groups. They are, among others:
- Gigabyte technical drawings
- GA-880GM-USB3 manuals
- Gigabyte product data sheets
- information booklets
- or energy labels Gigabyte GA-880GM-USB3
All of them are important, but the most important information from the point of view of use of the device are in the user manual Gigabyte GA-880GM-USB3.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Gigabyte GA-880GM-USB3, service manual, brief instructions and user manuals Gigabyte GA-880GM-USB3. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Gigabyte GA-880GM-USB3.

Similar manuals

A complete manual for the device Gigabyte GA-880GM-USB3, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Gigabyte GA-880GM-USB3 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Gigabyte GA-880GM-USB3.

A complete Gigabyte manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Gigabyte GA-880GM-USB3 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Gigabyte GA-880GM-USB3, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Gigabyte GA-880GM-USB3, that we can find in the current document
3. Tips how to use the basic functions of the device Gigabyte GA-880GM-USB3 - which should help us in our first steps of using Gigabyte GA-880GM-USB3
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Gigabyte GA-880GM-USB3
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Gigabyte GA-880GM-USB3 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Gigabyte GA-880GM-USB3?

Use the form below

If you did not solve your problem by using a manual Gigabyte GA-880GM-USB3, ask a question using the form below. If a user had a similar problem with Gigabyte GA-880GM-USB3 it is likely that he will want to share the way to solve it.

Copy the text from the picture

Captcha
New picture

Comments (0)