Manual Roland VA-76

264 pages 9.86 mb

Download

Go to site of 264

Prev Next

Summary

Roland VA-76 - page 1

3 VA-76 V-Arranger Keyboard 128-voice polyphony Thank you, and congratulations on your c hoice of the Roland V A -76 V -Arranger Keyboar d. The V A-76 is the 76-k ey (weig hted synthesiz er action), pr ofessional version of the widely acclaimed V A-7. V ariPhr ase, brandnew and striking ly realistic sounds and Drum Sets, all-new M usic Styles, an a ...
Roland VA-76 - page 2

4 • Before using this instrument, make sur e to read the instructions below , and the Owner’ s Man ual. .............................................................................................................. • Do not open (or modify in any way) the instru- ment, and avoid damaging the supplied power cable. ............................. ...
Roland VA-76 - page 3

5 VA -7 6 – Owner’ s Manual • The instr ument and the po wer cord should be located so their position does not interfer e w ith their proper v entilation. .............................................................................................................. • Always grasp only the plug or the body of the power c ord when plugging in ...
Roland VA-76 - page 4

Features 6 V ariPhrase pr ocessor The V A-76 features a new br eakthrough in sampling technology that allows for “elastic ” processing and MIDI data-lik e manipulation of sampled audio phrases. Y ou can no w combine Arranger playback (accompanime nts) w ith realtime triggering of sampled phrases so as to (re)cr eate vocals, “ acoustic” solo ...
Roland VA-76 - page 5

7 VA -7 6 – Owner’ s Manual 128 High-deﬁnition Music Styles, plus 559 Music Styles on the supplied Zip disk The V A-76 co mes loaded w ith an impr essive 128 high-deﬁnition M usic Styles covering every musical genre you need. Each Style comprises four versions (Basic, A dvanced, Orig- inal, and V ar iation), two Intr os, two Endings, four o ...
Roland VA-76 - page 6

Features 8 Useful options FC-7 Foot Contr oller The FC-7 Foot C ontroller allows y ou to perform various St yle selection functions (Fill In T o Or iginal/T o V ar iation, Start/Stop, etc.) by foot. Connect it t o the FC7 PED AL socket at the back of your V A-76. The functions performed by the FC-7’ s foot switches is program- mable. Note: The FC ...
Roland VA-76 - page 7

9 VA -7 6 – Owner’ s Manual In addition to the it ems listed under “USING THE UNIT SAFEL Y” (see page 4), please r ead and obser v e the following: Power supply • Do not use this instr ument on the same po wer circuit with any device that will gener ate line noise (suc h as an electric motor or variable lig hting system). • Before conne ...
Roland VA-76 - page 8

Important notes 10 • Disks containing important perfor manc e data for this instrument should always be lock ed (have their write protect tab slid t o the PROTECT position) befor e you insert them into the drive of another inst rument. • The identiﬁcation label should be ﬁrmly afﬁxed to the disk. If the label comes loose while the disk is ...
Roland VA-76 - page 9

11 VA -7 6 – Owner’ s Manual 1. Panel descriptions . . . . . . . . . . . . . . . . . . . . . . 14 1.1 Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.2 Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2. Setting up and demo songs . . . . . . . . . . . . . 19 2.1 Audio connect ...
Roland VA-76 - page 10

Contents 12 7.4 One Touch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 Ignoring certain One Touch settings (Cancel Options) 100 Programming your own Tone selections (Memorize) . 100 7.5 More refined Arranger settings . . . . . . . . . . . . . . . . 101 ARR(anger) Hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Roland VA-76 - page 11

13 VA -7 6 – Owner’ s Manual 12.5 User Style Edit mode . . . . . . . . . . . . . . . . . . . . . . . . 177 Erase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178 Insert . . . . . . . . . . . . . . . . . . . . . . . ...
Roland VA-76 - page 12

VA -7 6 Owner’ s Manual — Panel descriptions 14 1.1 Fr ont panel A D BEAM CONTROLLER section U se the [ON/OFF] button to switc h the D Beam Con- troller on (the butt on lig hts) or off (button dark). By holding down the [ON/OFF] butt on for more than a second, you call up the displa y page where you can select the parameter to be c ontrolled vi ...
Roland VA-76 - page 13

15 VA -7 6 – Front panel J KEYBOARD MODE section These three buttons ar e used to specify whether the keyboard will be split or whether one sound can be play ed using the entire keyboar d. Pr ess the [OTHER] button if you want to use other c onﬁgurations than “ Arranger left/melody rig ht” (ARRANGER) or “o ne sound for the entir e keyboar ...
Roland VA-76 - page 14

VA -7 6 Owner’ s Manual — Panel descriptions 16 S V ariPhrase section These buttons pr ovide access to the rev olutionar y V ariPhr ase function of your V A-76. T SUPER TONES buttons U se these buttons to select one of the ﬁve so-called “Super T ones” . These are sounds for the U pper 1 part you ma y want to use more ofte n than others. T ...
Roland VA-76 - page 15

17 VA -7 6 – Front panel a Floppy disk drive This is where y ou can inser t 2DD or 2HD ﬂopp y disks for external storage of your M usic Styles, U ser Pr o- grams, Composer Songs, and MIDI Sets. Press the eject button to remo ve the disk from the driv e. Note: Do not r e move the ﬂoppy disk while the DISK indica- tor on the front panel lights ...
Roland VA-76 - page 16

VA -7 6 Owner’ s Manual — Panel descriptions 18 1.2 Rear panel A POWER ON button Pr ess this button to switch the V A-76 on and o ff. B AC socket This is where y ou need to connect the supplied po wer cor d. Be sure t o only use a wall outlet that delivers the correct v oltage. C LCD CONTRAST knob U se this knob to set the contrast when y ou ar ...
Roland VA-76 - page 17

19 VA -7 6 – Audio connections 2.1 Audio connections The V A-76 does not c ontain an internal ampliﬁcation system. Y ou will either have t o use stereo headphones or connect the V A -76 to a keyboard or other type of ampliﬁer and speaker syst em. Y ou could also connect it to a P A system, po wer ampliﬁers, et c. OUTPUT 1 sockets— Connect ...
Roland VA-76 - page 18

VA -7 6 Owner’ s Manual — Setting up and demo songs 20 Once the internal cir cuit tests hav e been completed, the display looks as f ollows: This page will be displayed auto matically whene v er you lea ve the V A-76 unattended for mor e than ﬁve minutes. Note: Y ou can pre vent the V A-76 from automatically select- ing this display page at s ...
Roland VA-76 - page 19

21 VA -7 6 – Listening to the demo songs • Demo playback starts auto matically . B ut you can press a T one family ﬁeld (“Piano ” , “CP erc” , etc.) t o select another demo song that featur es the T ones of that family . The abbreviations on the above displa y page reﬂect the names of the BANK buttons on the front panel (right side) ...
Roland VA-76 - page 20

VA -7 6 Owner’ s Manual — Scratching the surface 22 3.1 The general idea Y our V A-76 is tw o instruments in one: one half pro- vides the backing for the melody you pla y in the other half. There are tw o main sections you can use for pla y ing liv e. (The third section, the Song Composer , can also be used for liv e applications, but is mainly ...
Roland VA-76 - page 21

23 VA -7 6 – Easy Routing: quick registration Her e is how it is structured: • Specify whether you want t o play with ( [In a BAND] ) or without accompaniment ( [As a SOL OIST] ). This is important for the remaining questions and answ ers. • ORGANIST means that y ou can play tw o different sounds with your left and right hands (the keyboard i ...
Roland VA-76 - page 22

VA -7 6 Owner’ s Manual — Scratching the surface 24 3.3 The Master page W hene v er you leav e the DEMO or EASY ROUTING mode by pressing [EXIT] o r [FINISH], the displa y looks more or less as follo ws: A Press this ﬁ eld if you want to select another Music Style (see page 59). B Press this ﬁ eld if you want to select other T ones (sounds) ...
Roland VA-76 - page 23

25 VA -7 6 – Using the VA-76 ’ s Arranger 3.4 Using the V A-76’ s Arranger The A r ranger is an interactiv e “pla yback sequencer” that pro v ides the acc ompaniments. These ac compani- ments are called “M usic St yles ” , because they provide an 8-track backing for a giv en musical genre (Rock, P op, Dance, W altz, etc.). The A r ran ...
Roland VA-76 - page 24

VA -7 6 Owner’ s Manual — Scratching the surface 26 Note: There are four more patterns for the ORIGIN AL and V ARIA TION le vels. See “ Orchestrator” on page 62 for how to select them. Professional transitions: Fill So far , we hav e only used the ORIGINAL and V ARIA- TION patterns. ORIGINAL is great for v erses, while V ARIA TION could be ...
Roland VA-76 - page 25

27 VA -7 6 – Adding a melody to the accompaniment 3.5 Adding a melody to the accompaniment If you set up the V A-76 using the Easy R outing func- tion, you not only select a M usic Style but also a sound for your right hand. Let’ s add a liv e melody to the acco mpaniment. 1. Press the [ORIGIN AL] or [V ARIA TION] button and play a chor d in th ...
Roland VA-76 - page 26

VA -7 6 Owner’ s Manual — Scratching the surface 28 an t Suppose y ou like the sound for the right hand but think that it is not really suit ed for the cur re ntly selected M usic Style. H ere are tw o easy ways of assig n- ing a different sound t o the r ight hand. Let’ s agree to use the wor d “ T ones” for the V A-76’ s sounds. Note: ...
Roland VA-76 - page 27

29 VA -7 6 – Adding a melody to the accompaniment One T ouch Another wa y of selecting a suitable T one for the r ight- hand part while working with the Arranger is by using the ONE T OUCH feature. In fact, One T ouch does a lot more than selecting a T one for U pper1. See page 99 for details. Note: One T ouch is intended for quick reg istration ...
Roland VA-76 - page 28

VA -7 6 Owner’ s Manual — Scratching the surface 30 7. Press the V ARIPHRASE [MEL ODIC] button (so that it lights). The display brieﬂy shows the f ollowing page where you c ould select another phrase. But please ignor e it here. It will disappear after a few seconds. The V ariPhrase par t is switched on, while the U pper1 part is automaticall ...
Roland VA-76 - page 29

31 VA -7 6 – Listening to Standard MIDI Files 3.6 Listening to Standar d MIDI Files Standard MIDI Files ar e sequences almost any sequencer can r ead. Though you can use y our V A -76 as “playback mac hine” of such Standard MIDI Files, it is also possible to mut e the melody par t and t o play it yourself. 1. Insert the supplied Zip™ disk i ...
Roland VA-76 - page 30

VA -7 6 Owner’ s Manual — Scratching the surface 32 • If Song Composer playback is st opped, selecting the Master page w ould switch off the Song Composer mode and take y ou back to A r ranger mode where y ou can use the automatic ac companiment function. Minus One playback Y our V A-76 allo ws you to mut e any give n par t of the song you ar ...
Roland VA-76 - page 31

33 VA -7 6 – Listening to Standard MIDI Files 12. Press [EXIT] t o return to the Master page. The Mast er page now looks different, because the ﬁeld in the upper left corner is called [Song]. See page 31. 13. Press the K e yboard M o de [ARRANGER] b utton if you onc e again want to use the Arranger . UP1 linked to Song Her e is a function that ...
Roland VA-76 - page 32

VA -7 6 Owner’ s Manual — V A-76 clinics 34 In this chapt er , we will ha ve a closer look at some of the V A-76’ s functions. While “Scratc hing the surface” on page 22 only showed y ou what to expect and ho w to obtain instant gratiﬁcation, this chapter is already a little more t echnical. Bu t again, not all parameters and functions ...
Roland VA-76 - page 33

35 VA -7 6 – Keyboard Mode clinic Split point in Arranger mode W hen the [ARRANGER] button lights, the keyboard is split in two hal ves. The split point is locat ed at a C key . This k ey is called the “C4”: There ma y be situations where the automatically assigned range is not what you need. In that case, you can change the split point: 1. P ...
Roland VA-76 - page 34

VA -7 6 Owner’ s Manual — V A-76 clinics 36 The display no w looks as follows (the [KE YB O ARD MODE] ﬁeld must be white): 3. If the [WHOLE] ﬁeld is not display ed in w hite, press it to mak e the display look like in the abov e illustration. In the ce ntr al part of this page, you can switch on all K eyboard parts you need, and sw itc h of ...
Roland VA-76 - page 35

37 VA -7 6 – T one clinic A ctive parts are display ed in white ﬁelds (and their button lights, see below), while sw itched-off parts are display ed in blue. 5. If necessar y , change the split point. See “Split point in Arranger mode” on page 35. This split point indeed applies both to the chor d rec- ognition area of the Arranger and the ...
Roland VA-76 - page 36

VA -7 6 Owner’ s Manual — V A-76 clinics 38 2. Specify the part for which you want t o select another T one: Hold do wn the [P AR T] button and press one of the NUMBER buttons. If you only press the [P ART] butt on, all GR OUP and BANK indicators go off, while the NUMBER indicator that corresponds t o the currently selected part lights. If you ...
Roland VA-76 - page 37

39 VA -7 6 – T one clinic T one selection via the display Let us now look at ho w to use the display for selecting T ones. F or details about the terms used in this para- graph, see “T one selection v ia the front panel” on page 37. 1. Press the [T one] ﬁeld in the display . The display no w looks as follows: If you look at the BANK/NUMBER ...
Roland VA-76 - page 38

VA -7 6 Owner’ s Manual — V A-76 clinics 40 5. Press the [A] o r [B] ﬁeld to select the desired T one group. 6. Press one of the following ﬁelds to select a bank within that group: 7. Press a T one ﬁeld to select a T one (number). Again, the V A-76 ma y actually load another T one than the one you select ed. W e believe that T one is even ...
Roland VA-76 - page 39

41 VA -7 6 – T one clinic Note: P ress the V ar iation ﬁeld without a number (“Organ 1” in our example) to preset the Capital T one as “Preferred T one” . 4. Press the [C ustomize] ﬁeld to stor e this V ariat ion as your new fa vorite. The display r esponds w ith: This means that your selection has been st ored. After a brief interval ...
Roland VA-76 - page 40

VA -7 6 Owner’ s Manual — V A-76 clinics 42 Her e’ s how you can tell whic h T one Map is currently being used: This information is also display ed on other pages (mark the “Map ” ﬁeld). H ere is another example: Note: T ones w ithout a “Map ” indication belong to Map 4 (the new V A-76 sounds). A word about the new T ones All new V ...
Roland VA-76 - page 41

43 VA -7 6 – T one clinic The display no w changes to: This page means that the WHOLE Keyboar d Mode is currently selected (see page 35). If you don ’t see this page, press the [KEYBO ARD MODE] ﬁeld in the upper right corner . 2. Press the [SPLIT] o r the [WHOLE] ﬁeld, depend- ing on whether you wish to assign the MDR part to the entire key ...
Roland VA-76 - page 42

VA -7 6 Owner’ s Manual — V A-76 clinics 44 Selecting Drum Sets for the MDR part The MDR part may alread y be a remarkable function by itself. But things really bec ome interesting when we tell you that the V A -76 comes with 116 different Drum Sets to choose fr om. There are Drum Sets for just about an y musical genre you can think o f – and ...
Roland VA-76 - page 43

45 VA -7 6 – V ariPhrase clini c 4.3 V ariPhrase clinic The revol utionar y V ar iPhrase function allows y ou to play v ocals or other sampled phrases via the keyboard – at any pit ch, and at an y tempo . 48 of those phrases reside in the V A-76’ s ROM memory . They are divided ov er two groups (A & B), w ith 3 banks per group , and 8 mem ...
Roland VA-76 - page 44

VA -7 6 Owner’ s Manual — V A-76 clinics 46 The bank names tell y ou something about the kind of situations for which the phrases wer e or iginally intended. The Melodic phrases can be used for playing solo lines, while the Rhythmic and Background phrases are probably mor e con v incing for spicing up y our music with the odd vocal acc ent. But ...
Roland VA-76 - page 45

47 VA -7 6 – V ariPhrase clini c Her e’ s how to select the M ono mode: 1. Press the M ode [MONO/POL Y] button to make it light. If the indicator doesn ’t light, the POL Y mode is selected. Her e, we need the MONO mode. 2. Switch on the U pper1 part (see page 45) and select the SPLIT K eyboard mode (see page 36). 3. Play a few c hords w ith y ...
Roland VA-76 - page 46

VA -7 6 Owner’ s Manual — V A-76 clinics 48 Adding r ealtime expression Things you ought to know about V ariPhrase The V ariPhr ase tec hnolog y allows y ou to change the pitch of a phrase (by playing melodies) while the speed (tempo) and characte r/timbre are kept c onstant. On the other hand, you are fr ee to change the tempo without affectin ...
Roland VA-76 - page 47

49 VA -7 6 – V ariPhrase clini c Realtime V ariPhrase contr ol via the display There ma y be times where you don ’t feel like using an y of the co ntrollers mentioned above – or wher e they hav e been assigned other functions you do not want to change. In that case, consider using three on-scr een sliders in the touch scr een for adding some ...
Roland VA-76 - page 48

VA -7 6 Owner’ s Manual — V A-76 clinics 50 Adding ef fects to the V ariPhrase part Though already amazingly ﬂexible by itself, the V ar i- Phrase part can even be enhanced using two dedicat ed effects. These Reverb and Chorus effects operate inde- pendently from the “main ” Reverb and Chorus effects. In man y instances, the Reverb effect ...
Roland VA-76 - page 49

51 VA -7 6 – Expression clinic 4.4 Expr ession clinic Allow us t o introduce the V A-76’ s performance func- tions. Also called Controllers , they allow you to add expression t o your playing, whic h is a ver y important aspect for simulating glissando ’ s, bendings, and other changes to the timbr e that w ill mak e your melodies even more c ...
Roland VA-76 - page 50

VA -7 6 Owner’ s Manual — V A-76 clinics 52 Ribbon contr oller (T ouch contr ol) The Ribbon/T ouch controller is a performance func- tion that was already a vailable on vintage analogue synthesizers, the Roland JP -8000, and the EM-20. W e included it because we ﬁgur ed that you might like t o inﬂuence one of the V A-76’ s parameters by s ...
Roland VA-76 - page 51

53 VA -7 6 – Expression clinic T ransposition If you are used to pla ying a song in a particular key , the T ranspose function w ill help y ou go on playing in that key while sounding in another one. That way , you can acco mpany a singer or instrument without chang- ing your ﬁngering. Hold d ow n the [ONE T OUCH] button while pressing U ser Pr ...
Roland VA-76 - page 52

VA -7 6 Owner’ s Manual — V A-76 clinics 54 5. Press [ o B A CK] to return to the previous display page, or [EXIT] to return to the Master page. Octave The Octav e function is another useful parameter that allows y ou to change the pitch of the selected part in octav e steps (12 semitones). Y ou could take advantage of this function for solo pa ...
Roland VA-76 - page 53

55 VA -7 6 – Expression clinic At ﬁrst, the switches of this controller are assigned Arranger control functions. Y ou can, however , assign other functions to these switches. See page 193 for details. Note: The FC-7 assignments apply to the V A-76 and are not wr itten to individual User Programs. Selecting another User Program is therefore not ...
Roland VA-76 - page 54

VA -7 6 Owner’ s Manual — V A-76 clinics 56 Metr onome The V A-76 is equipped with three metronomes: one for Style playback, one for Song Composer rec ording/ playback, and one for U ser Style Composer program- ming. If you wish to hear a metronome during Style play- back, here is what you need t o do: 1. On the Master page, press the metronome ...
Roland VA-76 - page 55

57 VA -7 6 – Using live vocals 1. See “Metro nome Output” for how t o select the dis- play page with the metronome options. 2. Select an option in the Count-I n section: OFF— The count-in function is off. 1Bar , 2Bar— Whenev er you start Arranger playback, the metronome counts in 1 o r 2 bars before the selected M usic Style pattern start ...
Roland VA-76 - page 56

VA -7 6 Owner’ s Manual — V A-76 clinics 58 6. Press the [ k ] ﬁeld sev eral times until the following page is display ed: 7. Set the [V olume] slider to “0” , and press the [ON/ OFF] ﬁeld below this slider t o select “OFF” (if neces- sar y). Let us now set the inpu t sensitivit y of the V ariPhrase [INPUT] socket. 8. Sing into the ...
Roland VA-76 - page 57

59 VA -7 6 – Arranger/Music Style clinic 4.6 Arranger/Music Style clinic Before telling y ou more about the M usic Styles, w e’ d like t o explain the difference betw een Music Styles and the A r ranger . The Arranger is in fact the function (or sequencer) that pla ys the accompaniments y ou select. These acco mpaniments are alwa ys related to ...
Roland VA-76 - page 58

VA -7 6 Owner’ s Manual — V A-76 clinics 60 need to do is pr ess the desired NUMBER button just before the beat where y ou wish the new Music Style to take effect. Style selection via the display Let us now look at ho w to use the display for selecting Styles. 1. Press the [Style] ﬁeld in the display . The display no w looks as follows: If yo ...
Roland VA-76 - page 59

61 VA -7 6 – Arranger/Music Style clinic selection via the display”). Just be sur e to select group C. Here ’ s what the display looks lik e when group C has been selected: E ven for M usic Styles on Zip/ﬂoppy , the V A -76 thus displays their names. In fact, it’ s the names that are important for ﬁnding the Styles on a disk. I f you ch ...
Roland VA-76 - page 60

VA -7 6 Owner’ s Manual — V A-76 clinics 62 5. If the desired M usic Sty le is not displa yed, use [ o ][ k ] to select another group o f 4 Styles. Y ou can also use the [TEMPO/D A T A] dial for select- ing other pages with different M usic Styles on the inserted disk. Note: The V A-76 contains a powerful search eng ine for quickly locating the ...
Roland VA-76 - page 61

63 VA -7 6 – Arranger/Music Style clinic W ith the ORCHESTRA TOR function, you can further reﬁne and vary the Orig inal and V ariation patterns play ed by the Arranger . This is like orchestrating the acco mpaniment in realtime, because you can leav e out parts, thin out the drum part, or even select a totally different acc ompaniment. There ar ...
Roland VA-76 - page 62

VA -7 6 Owner’ s Manual — V A-76 clinics 64 1. See steps (1) and (2) abov e. The “1st St yle ” is the one you (or the V ir tual Band) selected last, while the “2nd Style” is prepared auto- matically . What you hear no w is the “1st Style” (all three ﬁelds in the left c olumn are white). Note: See below for how to select other M us ...
Roland VA-76 - page 63

65 VA -7 6 – Song Composer clinic 4.7 Song Composer clinic On page 31 we already sho wed you how t o play back a Standard MIDI File on Z ip or ﬂoppy disk. H ere we ’ll reco rd a song using the Arranger as acc ompaniment. Recor ding your music Y ou can record y our music as “Songs” that can be sav ed to Zip or ﬂoppy disk. Note: Y our sin ...
Roland VA-76 - page 64

VA -7 6 Owner’ s Manual — V A-76 clinics 66 Listening to your song Y ou probably want to listen t o your song now . If you like it, be sure to sa ve it to Zip or ﬂopp y disk (see “Sav- ing your song t o disk”). 1. Press the [ST OP ■ | √ ] ﬁeld twice. This returns the Song Composer t o the beg inning of your new song. 2. Press the [P ...
Roland VA-76 - page 65

67 VA -7 6 – Song Composer clinic 3. Press the [REC ● ] ﬁeld (so that it is displa yed in white). 4. Press the [2nd T r k] ﬁeld. This means “redo the melody but lea ve the Arr anger parts unchanged” . The relevant part of the display no w looks as follows: 5. If you ’ re ready , press the [PLA Y ® ] ﬁeld to start recor ding. Re mem ...
Roland VA-76 - page 66

VA -7 6 Owner’ s Manual — V A-76 clinics 68 Note: I f you want to save the song under its current name, or the name assigned by default (Song_001), you can skip steps (4)~(7). 4. Press the [N ame] ﬁeld, because you need to give your brand-new song a name. In fact, you even need t o g iv e your song tw o names: a Song N ame , and a File N ame ...
Roland VA-76 - page 67

69 VA -7 6 – Playing with the User memories 5.1 Playing with the User memories Loading V ariPhrases, V ariPhrase Sets or audio ﬁ les As stated earlier , y ou can also use your o w n V ar iPhra- ses, or load up to 16 phrases from the supplied Zip disk. ( The Zip disk contains 62 U ser V ar iPhrases and 7 Phrase Sets.) This allows y ou to expand ...
Roland VA-76 - page 68

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 70 Pr ess the [YES] ﬁeld if it is OK to ov erw rite the phrase in the selected U ser memor y . P ress the [NO] ﬁeld to return to the Disk Load page. Press [ o Back] to return to the pr e vious page and select another memory . If you pr ess [Phrase Set] The display no w looks more or ...
Roland VA-76 - page 69

71 VA -7 6 – Sampling your own phrases 6. Press the SAMPLING [CAPTURE] b utton. The display no w looks more or less as follo ws: 7. Press the [A] or [B] ﬁeld t o select the desired U ser Phrase group. 8. Press a Phrase memory ﬁeld (so that it is displayed in white). 9. Press the [Captur e] ﬁeld. T r y to select a ﬁeld that r eads NO PHRAS ...
Roland VA-76 - page 70

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 72 Note: The time signature cannot be changed here. That explains why we suggested select ing a M usic Style w ith the correct time signature before calling up the Capture func- tion. 14. Press the [ST ART/ST OP] button and start singing or playback of the exter nal audio sour ce. Note: ...
Roland VA-76 - page 71

73 VA -7 6 – Sampling your own phrases Pr ess a key on the keyboard (or the [P review] ﬁeld) to play back the audio mat erial, and adjust the Edit Start position so that the phrase starts at the desired posi- tion whenever y ou press a key on the keyboard (or the [Pr e view] ﬁeld). Note: I t would be a good idea to wor k with headphones at th ...
Roland VA-76 - page 72

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 74 Encoding the phrase So far , we hav e been working with audio data that you could alr eady save t o disk (see page 76). That, how- ever , would not allo w you to use this phrase in sync with the Arranger tempo . That is because the audio ﬁle hasn ’t been turned into a V ariPhrase ...
Roland VA-76 - page 73

75 VA -7 6 – Sampling your own phrases pitch, while the phrase is actually too low . T o “trans- pose” it one octav e up (when you press the same k e y on the keyboar d), you w ould have t o select “ A3” as Original K e y . Specifying the phrase ’ s tempo: Time Signatur e, Measur e, Beat, T empo If you decided not to use the metronome w ...
Roland VA-76 - page 74

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 76 11. Play a few not es on the keyboard to tr y out the phrase. I f necessary , c orrect any of the above parame- ters, and press [EXECUTE] again. Note: I f you change a setting after pressing [EXECUTE], you must encode the phrase again (by pressing [EXECUTE] yet again). Saving your V ...
Roland VA-76 - page 75

77 VA -7 6 – Phrase Parameters 5.3 Phrase Parameters As y ou know , ther e are some parameters you usually set immediately after sampling an audio p hrase and before sa v ing it to disk. “Executing” those changes transforms such a phrase into a V ariPhrase (a process we call “enc oding”). V ariPhr ases ar e the audio “tracks” you can ...
Roland VA-76 - page 76

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 78 Fine T une (–50~50) This parameter allo ws you to tune the V ari- Phrase if it turns out that it is slightly sharp or ﬂat. J ust in case you ha ve alread y worked with a sampler: this parameter is not meant for t empo-matching purposes: it merely co r rects the tuning o f your ph ...
Roland VA-76 - page 77

79 VA -7 6 – Phrase Parameters Time Keyfollow (–200~+200) This parameter allows y ou to vary the tempo as y ou play higher or lower not es (w ith the Original K e y setting as origin, where the phrase will run in sync with the Arranger/Song Composer). “0” is the usual setting. N egative val ues (–) mean that the tempo decreases as y ou pl ...
Roland VA-76 - page 78

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 80 Time Sw W hen Time K ey follo w (see page 79) is set to a value other than “0, ” the Time S w setting speciﬁes whether differences in the pla yback speed between the ﬁrst- play ed key will be smoothly changed to the playback speed of the sec ond-played k e y (ON), or whether ...
Roland VA-76 - page 79

81 VA -7 6 – Global V ariPhrase functions 5.4 Global V ariPhrase functions The following parameters ar e Global parameters. This means that they apply to the V ariPhr ase part itself – not just the phrase that is currently select ed. They can, howev er , be written to a U ser Pr og ram (see page 127), so that up to 128 differ ent parameter comb ...
Roland VA-76 - page 80

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 82 Mode 1. Press the [FUNCTION MENU] b utton. 2. Press the [V ariPhr ase] ﬁeld. 3. On the page that appears no w, press the [Global] ﬁeld. 4. Press the [M ode] ﬁeld in the left column. Loop If you want the Phrase to pla y back as a loop (i.e. t o be repeated o ver and ov er), turn ...
Roland VA-76 - page 81

83 VA -7 6 – T ruly “ global ” VariPhrase parameters selected phrase and similar to a noise gat e in a recor d- ing studio, with the additional advantage that you can specify the pitch of the “ audible bits” . Pause Another re markable footsw itch function allo ws you to “freez e” the audio data at the point wher e you press the foots ...
Roland VA-76 - page 82

VA -7 6 Owner’ s Manual — More about the V ariPhrase pa rt 84 Sync Settings The following parameters ma y turn out to be very use- ful indeed. As y ou know , all V ar iPhrases (R OM and U ser) are automatically synchr onized to the Ar ranger/ Song Composer tempo . At e xt remely high or lo w val- ues, however , the p hr ases ma y still be OK fo ...
Roland VA-76 - page 83

85 VA -7 6 – Upper1 functions 6.1 Upper1 functions Mor e about the Super T ones The SUPER T ONES buttons are int ended to help you select a T one for the Upper1 (or UP1) part without bothering to use the [T ones] ﬁeld on the Master page or the BANK/NUMBER butt ons. They cannot be used for the other parts. W hene v er you press a SUPER T ONES bu ...
Roland VA-76 - page 84

VA -7 6 Owner’ s Manual — Advanced Keyboard part functions 86 Memorize Super T ones: pr ogramming other assignments for the buttons As stated earlier , y ou are free to assign an y ﬁve of the V A-76’ s 3,646 T ones to the U ser set memories for the SUPER T ONES buttons. 1. Select a T one for the U pper1 par t. See page 37. 2. Press the [FUN ...
Roland VA-76 - page 85

87 VA -7 6 – Upper2 functions 1. Press the K e yboard M o de [O THER] button. The display no w looks more or less as follo ws: 2. If the display does not look like in the abov e illus- tration, press the [KE YBOARD MODE] ﬁ eld in the upper right corner , and the [SPLIT] ﬁeld. Both must be displa yed in white. 3. Press the [UP2 S plit] ﬁeld. ...
Roland VA-76 - page 86

VA -7 6 Owner’ s Manual — Advanced Keyboard part functions 88 Splitting Upper2 and the V ariPhrase part Once y ou have c ompleted the above and set the UP2 Split point to y our liking , you can switch off the UP1 part and use the V ariPhr ase part instead so as to use a PCM (sampled) T one for UP2 and a V ariPhrase in the rightmost keyboard zon ...
Roland VA-76 - page 87

89 VA -7 6 – Upper2 functions the U pper2 and Upper1 parts are split ( UP2 S plit or UP2 T o Left ), detuning or shifting the UP2 part would not be very meaningful. Y ou could use Coarse to pr og ram an interval of a ﬁfth (7 semitones) for U pper2, which is especially effective for brass sounds and guitar power c hords. Do not f or- get to acti ...
Roland VA-76 - page 88

VA -7 6 Owner’ s Manual — Advanced Keyboard part functions 90 Instead of jumping in semitone steps (as y ou would expect), the pitch glides from one note t o the next whenever the P ortamento time is higher than 0. The higher the value you set, the slower the glide. This effect is particularly useful for synthesizer or gy psy violin par ts. 4. ...
Roland VA-76 - page 89

91 VA -7 6 – V elocity sensitivity 1. On the above displa y page, pr ess the [Options] ﬁeld. 2. On the page that appears no w, press the [Lo wer Hold] ﬁeld. 3. Press the desir ed “Lower On/Off ” ﬁelds to mak e your selection. If you select [Low er 1 Hold On] and [Low er 2 Hold On], the [L WR Hold] ﬁeld on the pr ev ious display page a ...
Roland VA-76 - page 90

VA -7 6 Owner’ s Manual — Advanced Keyboard part functions 92 Min and M ax can be used effectively for switching between two T ones simply by striking the k eys harder or softer . Doing so allows y ou to alternate between tw o sounds. Remember , though that some “V” T ones already ha ve this function built-in (see page 42). Using such T one ...
Roland VA-76 - page 91

93 VA -7 6 – Scale T uning The pitch of the other notes is left unchanged. The keys co r responding t o the notes whose pitch is changed are displa yed in white for easy identiﬁcation. Her e is an example: Y ou w ill notice that ev er y note can be selected only once. That is because the value you specify (using Pitch EDIT , see below) applies ...
Roland VA-76 - page 92

VA -7 6 Owner’ s Manual — Advanced Keyboard part functions 94 Her e again, the white k eys inform you about the notes whose pitch is actually being aff ected. 2. Press the value ﬁeld (or the o n-screen key) of the note/key whose pitch y ou want to change. That ﬁeld is display ed in white. As stated earlier , the pitch of all notes is at ﬁ ...
Roland VA-76 - page 93

95 VA -7 6 – Arranger and Music Styles 7.1 Arranger and Music Styles Think of the Arranger’ s M usic St yles as y our backing band. Y our V A-76 is indeed capable of playing several “versions ” of a given ac companiment. All y ou need to do is make up y our mind about the kind of music y ou want to pla y and to select a M usic Style that co ...
Roland VA-76 - page 94

VA -7 6 Owner’ s Manual — More about the Arranger 96 Sync (Options) If you ’ve nev er used an arr anger k e yboard befor e, the status of the [SYNC] butt on is the single most impor- tant function to look out for after switc hing on your instrument. After all, if it is on without you kno wing it, playing just one note on the keyboar d may cau ...
Roland VA-76 - page 95

97 VA -7 6 – Selecting other Style divisions Tip: The I ntro is “renewable ” , i.e. y ou can press the [INTR O] button again while the Intro is pla y ing. Doing so on the fourth beat of the ﬁrst Intr o bar , for instance, will retrigger the beg inning of the Intro in the second bar . Fill In Half Bar Certain pop songs in 4/4 contain bars th ...
Roland VA-76 - page 96

VA -7 6 Owner’ s Manual — More about the Arranger 98 Bsc/Ad v— Switches between the Basic ( B ) and Ad vanced ( D ) levels. These two patterns are a vailable via the V A-76’ s Orchestrator function. Or/V ar— Switches betw een Or iginal and V ar iation and thus duplicates the functions of the [ORIGINAL] and [V ARIA TION] buttons on the fr ...
Roland VA-76 - page 97

99 VA -7 6 – Melody Intelligence 7.3 Melody Intelligence The A r ranger of y our V A-76 can not only pla y chords but also add a counter -melody to y our melodies based on the chords y ou play in the chor d recognition area (see page 101). This counter -melody w ill be pla yed by the M elody Intelligence part (MEL INT) and added to the U pper1 pa ...
Roland VA-76 - page 98

VA -7 6 Owner’ s Manual — More about the Arranger 100 If you select a One T ouch memory while another one is alr eady active In that case, the V A-76 selects the T ones and Rev er b/ Chorus/Delay settings of that One T ouch memory . It ma y also sw itc h on one of the following functions if you switched them off after selecting the ﬁrst One T ...
Roland VA-76 - page 99

101 VA -7 6 – More re ﬁ ned Arranger settings 1. If necessar y , switch off the One T ouch memory that is currently on: • Pr ess the [ONE TOUCH] butt on to select the follow- ing display page: • Pr ess the [OFF] ﬁeld so that it is displayed in whit e. The One T ouch ﬁeld (1~4) that was on, w ill go dark. 2. Select the M usic Style you w ...
Roland VA-76 - page 100

VA -7 6 Owner’ s Manual — More about the Arranger 102 point you set for the K e yboar d par ts will also be used by the Arr anger to det ermine the upper (Left) or lower (Right) limit of the chor d recognition area. 1. Press the K e yboard M o de [O THER] button. 2. Press the [ARR ANGER CHORD] ﬁeld in the upper left corner of the display (so ...
Roland VA-76 - page 101

103 VA -7 6 – More re ﬁ ned Arranger settings Dynamic Arranger The Dynamic A r ranger function allows y ou to contr ol the volume o f the Arranger parts via the way you strike the keys in the chor d recognition area (v elocit y). If the selected Style uses a “V” Dr um Set, this function also inﬂuences the timbre of the drum sounds in a fa ...
Roland VA-76 - page 102

VA -7 6 Owner’ s Manual — More about the Arranger 104 7.6 Arranger Options 1. On the page that appears when you pr ess the K e y- board M ode [OTHER] button, press the [ARRANGER CHORD] ﬁeld if it is not displayed in white. 2. Press the [Options] ﬁeld. The display no w looks more or less as follo ws: Y ou can also select this par ticular pag ...
Roland VA-76 - page 103

105 VA -7 6 – Arranger Options Pr ess the ﬁrst ﬁeld ( Rit/Ac c ) and use the [TEMPO/ D A T A] dial or the [D A T A] button/N umer ic Entry pad to select the ratio by whic h the tempo should increase/ decrease. Ne xt, press the [CPT] ﬁeld and e nter the number of clocks requir ed for executing the r equested tempo change. “480” correspon ...
Roland VA-76 - page 104

VA -7 6 Owner’ s Manual — More about the Arranger 106 Intr o& Ending Alteration N ow suppose you lik e the accompaniment you assigned your chor d to (e.g. the “7th ” pattern), but think that the Intr o and Ending sound odd when you start a song with that chord (“Csus4” for instance). Consider the follo w ing example: you assigned th ...
Roland VA-76 - page 105

107 VA -7 6 – Selecting T ones for the Arranger parts 7.7 Selecting T ones for the Arranger parts Y ou can select other T ones for the Arranger parts of the currently selected M usic St yle. Assigning another Drum Set to the A. Drums part, for instanc e, ma y already dramatically change the M usic St yle ’ s charac- ter . Lik ew ise, replacing ...
Roland VA-76 - page 106

VA -7 6 Owner’ s Manual — More about the Arranger 108 7.8 W orking with Styles on Disk Programming your own Disk Link assignments The V A-76 co mes w ith 64 prepr ogr ammed assign- ments to M usic Styles on the supplied Zip disk. The Zip disk, however , c ontains a lot more M usic Styles (559 in all), while you may in time also use othe r Style ...
Roland VA-76 - page 107

109 VA -7 6 – W orking with Styles on Disk Find: locating Styles on a Zip di sk W orking w ith M usic Styles on Zip or ﬂoppy disk is con venient and fast, as you kno w by now . The Zip disk supplied with the V A-76, however , c on- tains 559 M usic Styles. That is wh y there is also a pow- erful Find function for quickly locating the Style you ...
Roland VA-76 - page 108

VA -7 6 Owner’ s Manual — More about the Arranger 110 If it says “0 of 559” , the V A-76 was unab le to ﬁnd a ﬁle that contains the desir ed information. In all othe r cases, the ﬁeld w ill read “XX of 559” , which means “found X X St yle N ame, Countr y , Genre, or File N ame entries that match the characte rs you entered. ” ...
Roland VA-76 - page 109

111 VA -7 6 – W orking with Styles on Disk Style Delete It is also possible to delet e a St yle from ﬂo ppy or Zip disk. Y ou should use this as sparsely as possible – and never for the supplied Z ip or ﬂoppy disk . Onc e a Style is gone, there is indeed no way t o restore it. So please be careful and try to forget this function even exists ...
Roland VA-76 - page 110

VA -7 6 Owner’ s Manual — Mixer , effects and editing 112 The V A-76 also allo ws you to set the v olume, the ste- reo position and the amount of effect the parts should use. Of course, you can also pr og ram the effects them- selves. All of these parameters can be found on the Mix er pages. There are thr ee ways to select the V A-76’ s Mixer ...
Roland VA-76 - page 111

113 VA -7 6 – V olume and pan (2) Use a Single Part page Single P ar t pages contain all a vailable Mix er par ame- ters for the currently select ed par t. A typical Sing le P ar t page looks lik e this: Her e, y ou need to proceed as f ollows: 1. Select one of the V A -76’ s Mixer pages (see a~c on page 112). 2. Select the Mix er group that co ...
Roland VA-76 - page 112

VA -7 6 Owner’ s Manual — Mixer , effects and editing 114 Note: The relative balance of t wo grouped parts is only maintained as long as you do not decrease (or increase) the volume once one of the faders on the other pages has reached the value “0” (or “127”). If you inc rease the volume of a group beyond the point w here one o f its m ...
Roland VA-76 - page 113

115 VA -7 6 – Output Assign 4. Set a value between 1 and 63 to mo ve the part fur- ther to the left, or 65~127 to move the part further to the right. N ote that you can also select Rnd (Random), which means that the part will alternate between the left and right channels in a random way . Note: The percussion sounds of the M.Drums and A.Drums par ...
Roland VA-76 - page 114

VA -7 6 Owner’ s Manual — Mixer , effects and editing 116 1. Press the [FUNCTION MENU] b utton. 2. Press the [Output Assign] ﬁeld in the bottom ro w. 3. Depending on the group the desired part belongs to , press the [K e yboard P arts], [Style P ar ts] or [Song P ar ts] ﬁeld so that it is displa yed in white. In the abov e example, the K e ...
Roland VA-76 - page 115

117 VA -7 6 – Effects and Equalizer 4. Press the [R everb] ﬁeld and modify the Reverb send level. Note: The Reverb, Delay and Chorus send levels cannot be set for K eyboard parts you assig n to the M-FX effect (see page 122). The M-FX effect, howe ver , has the same send parameters (see page 123). Effects settings Three of the V A-76’ s effec ...
Roland VA-76 - page 116

VA -7 6 Owner’ s Manual — Mixer , effects and editing 118 7. On that page, press the ﬁeld of the parameter y ou want to edit and change its value with the slider , the [TEMPO/D A T A] dial, or the [D A T A] button/Numeric Entr y pad. Reverb types & Parameters This is where y ou can edit the Reverb effects proc essor . Seeing that Delay us ...
Roland VA-76 - page 117

119 VA -7 6 – Effects and Equalizer Rate (0~127)— This parameter sets the speed (fr e- quency) at which the Chorus sound is modulated. Higher values result in fast er modulation. Depth (0~127)— This parameter sets the depth at which the Chorus sound is modulated. Higher values result in deeper modulation. Cho ® Reve r b (0~127)— This param ...
Roland VA-76 - page 118

VA -7 6 Owner’ s Manual — Mixer , effects and editing 120 2. Press the L ow Gain [400Hz] or [200Hz] ﬁeld to select the low frequency t o be boosted or cut. 3. Press the Lo w Gain value ﬁeld and use the slider (right), the [TEMPO/D A T A] dial, or the [D A T A] but- ton/N umeric Entr y pad to enter a positiv e (boost) or negative value (cu t ...
Roland VA-76 - page 119

121 VA -7 6 – Insertion effect (M-FX) 2. Press and hold the M-FX [ON/OFF] b utton to jump to the follo w ing display page: This page may look vaguely familiar (especially the left column). There are indeed othe r ways of selecting this page: via the [Mix er] ﬁeld on the Master page, or via the [EFFECTS] button (see page 112). But y ou then need ...
Roland VA-76 - page 120

VA -7 6 Owner’ s Manual — Mixer , effects and editing 122 Assigning the M-FX to a Keyboar d part Y ou may hav e noticed the Insertion M-FX [ON/OFF] ﬁeld on the Single P ar t pages of the Keyboar d par ts (see page 113). Here is an example: Pr ess it (so that it reads [ON]) to assign the currently selected K eyboard part to the M-FX. Note: Thi ...
Roland VA-76 - page 121

123 VA -7 6 – Insertion effect (M-FX) Selecting an M-FX type Let us now ha ve a look at how t o select a different ty pe (effect) for the M-FX proc essor . Eac h t ype you select is loaded with suitable preset settings that cannot be edited on the V A-76 itself. Y ou can, however , modify two parameters per type v ia the [M-FX] knob on the front ...
Roland VA-76 - page 122

VA -7 6 Owner’ s Manual — Mixer , effects and editing 124 8.6 V ariPhrase and Audio In ef fects The V ariPhrase and A udio In parts are two separate entities, which is why they do not shar e the same effects processors as the K eyboard and Arranger/Style parts. The advantage is that y our “virtual” ( V ari- Phrase) and “ actual” (A udio ...
Roland VA-76 - page 123

125 VA -7 6 – Sound Palette: editing Keyboard part parameters 8.7 Sound Palette: editing Keyboar d part parameters Y our V A-76 allo ws you to edit c er tain parameters that affect the way a K e yboar d par t sounds when you pla y it. These parameters will help you “ modify” the parts by adjusting their brilliance, their modulation speed (Vib ...
Roland VA-76 - page 124

VA -7 6 Owner’ s Manual — Mixer , effects and editing 126 Note: There are additional modulation parameters that can be controlled via the Aftertouch (see page 189). U se the m for W ahW ah (TVF modulat ion) or tremolo (amplitude modulation). Timbre (TVF) By modifying the ﬁlter settings, you can co ntrol the timbre (tone) of the sound. The V A ...
Roland VA-76 - page 125

127 VA -7 6 – Writing your settings to a User Program The V A-76 is equipped with 128 U ser Programs that allow y ou to store almost all settings (or r eg istrations) you mak e on the front panel. Before taking a closer look at these U ser Programs, there is one thing we hav e to point out. All settings relating to MIDI must be wr itten to a MIDI ...
Roland VA-76 - page 126

VA -7 6 Owner’ s Manual — Registrations – User Programs 128 3. U se the [A]/[B] and numeric ﬁelds to select the group, the bank and the memory number where you wish to w rite y our settings. One ﬁnal step before writing your settings t o a User Pr og ram is to assign a name to y our settings. Y ou only hav e to do this the ﬁrst time you ...
Roland VA-76 - page 127

129 VA -7 6 – Selecting User Programs The name of the selected U ser Program is displayed on the Mast er page: The asterisk (*) only appears when you c hange a parameter setting after loading a U ser Program. This is to alert you to the fact that the curr ent settings no longer correspond t o the ones you recalled. If you like them better than th ...
Roland VA-76 - page 128

VA -7 6 Owner’ s Manual — Registrations – User Programs 130 T empo— Pr ess this ﬁeld if the tempo setting con- tained in every U ser Program should be ignored. MIDI Set— Pr ess this ﬁeld if the linked MIDI Set (see page 131) should not be recalled. This allows you t o use a U ser Program, that you originally programmed for a given MID ...
Roland VA-76 - page 129

131 VA -7 6 – Automatic functions for User Programs Linking a MIDI Set to a User Pr ogram MIDI Sets are “U ser progr ams for MIDI paramete rs” . There are eight such memories (see page 207). If y ou regularly use the V A-76 in differ ent MIDI environ- ments (studio, liv e, band), preparing three MIDI Sets and linking them to the U ser Program ...
Roland VA-76 - page 130

VA -7 6 Owner’ s Manual — Song Composer (the basics) 132 The Song Composer of your V A-76 is a Standar d MIDI File play er/recorder with the additional advan- tage that is can double as 16-track sequencer whenev er you want it t o. The V A-76’ s Composer reads GM/GM2/GS c ompati- ble Standard MIDI ﬁles. Note: Y ou may be confused by the wor ...
Roland VA-76 - page 131

133 VA -7 6 – Song List: searching songs on disk (Find) If you press [YES], the display sho ws an animated clock to indicat e that the disk is being formatted. Y ou can exit this display page without interrupting the formatting process b y pressing the [EXIT] ﬁeld. That allows y ou to do something else while the V A-76 is formatting. Befor e re ...
Roland VA-76 - page 132

VA -7 6 Owner’ s Manual — Song Composer (the basics) 134 The display no w looks more or less as follo ws: 3. Play the notes of the Song you want the V A -76 to ﬁnd. The key and rh y thm are of little importance. (Y ou must get the intervals right, though!) The note bo xes will display a quarter note for ev er y note you pla yed. Fiv e “note ...
Roland VA-76 - page 133

135 VA -7 6 – Song playback functions The display no w looks more or less as follo ws: 4. Press the [PLA Y ® ] ﬁeld to star t Song pla y back. The lyrics are now display ed on screen: 5. Press the [ST OP ■ | √ ] ﬁeld to stop pla yback, or the [ o Back] ﬁeld to return to the main Song Co mposer page. Note: Y ou can also program and edit ...
Roland VA-76 - page 134

VA -7 6 Owner’ s Manual — Song Composer (the basics) 136 2. On the Song Composer page (see abov e), pr ess the [Minus One] ﬁeld. The display no w looks more or less as follo ws: The [1]~[16] entries refers to the 16 MIDI c hannels of the currently selected Standar d MIDI File. The [ON] and [OFF] switches are only displa yed for tracks that co ...
Roland VA-76 - page 135

137 VA -7 6 – Song Chains T ranspose Of c ourse, it is also possible to tak e advantage of the V A-76’ s T ranspose function, whic h may be con venient if y ou are used to playing a giv en song in another key than the one used by the select ed Standard MIDI File. There are tw o methods for setting the transposition: A Hold down the [ONE TOUCH] ...
Roland VA-76 - page 136

VA -7 6 Owner’ s Manual — Song Composer (the basics) 138 5. Press the [Edit] ﬁeld. (The display on your V A -76 may look slightly differ- ent.) 6. Press the [N ew] ﬁeld to create a new Song Chain. Ignore this step if you want to edit (c hange) an exist- ing Song Chain (the one y ou selected above). The display no w looks as follows: 7. Pres ...
Roland VA-76 - page 137

139 VA -7 6 – Song Options Chain Mode The Chain M ode allows you t o specify how the selected Song Chain should be pla yed back. This is ty pically a function y ou set after selecting the desired Song Chain but befor e star ting playbac k. Pr ess the [ Au t o ] ﬁeld if playbac k of the next song in Chain is to start automatically when the curre ...
Roland VA-76 - page 138

VA -7 6 Owner’ s Manual — Song Composer (the basics) 140 Note: I f you rename or delete a song that is referenced by a Song Chain (see page 138), the P osition in quest ion will be empty . The V A-76 will skip such empty Positions during playback of the Chain in question. (Be awar e that this may shorten your break whe n you use the V A-76 for ...
Roland VA-76 - page 139

141 VA -7 6 – 16-track Sequencer 11.1 16-track Sequencer The Song Composer of your V A-76 is link ed to a 16- track sequencer with full-ﬂedged editing functions that allows y ou to reﬁne y our recordings in great detail. Selecting the 16-track sequencer 1. Press the [SONG COMPOSER] b utton. The display no w looks as follows: 2. Press the [16 ...
Roland VA-76 - page 140

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 142 Example 1: Recor ding a track Her e’ s how to add a track to a song in the V A -76’ s Song RAM memory . This is o nly meaningful after recor ding a song using the Song Composer or after playing back a song on disk. See page 145 for how to start a new song . Note: Though the follow ...
Roland VA-76 - page 141

143 VA -7 6 – 16-track Sequencer 7. Press the [Octa ve] ﬁeld. This is only necessary if you want y our notes to be sounded and rec orded in a different octa ve than the one you use fo r playing . This can be useful for recor d- ing a part which is just a little too lo w (or too high) and therefor e does not “ﬁt” into 61-note range c overe ...
Roland VA-76 - page 142

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 144 V olume (Level) 13. Press the [Mix er] ﬁeld in the left column. The display no w looks more or less as follo ws: 14. Press the [Lev el] ﬁeld in the left column so that it is display ed in white. 15. If necessar y , use the [V OL UME] slider for setting the desired v olume. Y ou ca ...
Roland VA-76 - page 143

145 VA -7 6 – 16-track Sequencer Saving your song The 16-track sequencer uses a special portion of the V A-76’ s RAM memor y where all editing tak es place. T o ensure that you do not fo rget to save y our song after rec ording and/or editing it, you are giv en the opportunity to do so upon leaving the Song Com- poser page (by pressing [EXIT]): ...
Roland VA-76 - page 144

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 146 Song RAM memory . (Songs pr ogr ammed on other instruments that already c ontain two drum tracks can be used like V A -76 songs w ith a “2nd Drum track” , though.) Select Off if you don ’t need a second Drum Set, or set the number of the desired track. “10” is not available ...
Roland VA-76 - page 145

147 VA -7 6 – Editing 16-track songs 11.2 Editing 16-track songs Easy editing and useful functions After r ecording a track, you ma y want to do some touching up . H ere are some easy things y ou can do. See “In-depth editing of a 16-tr ack song ” on page 148 for more elaborate functions. [Play T rk] If this ﬁeld is displayed in blue, you a ...
Roland VA-76 - page 146

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 148 In-depth editing of a 16-track song The Edit level of the 16-track mode provides eight functions: Erase, Delete, I nser t, T ranspose, V elocity , Quantize, Gate T ., and Shift. Her e is how to select these Edit functions: 1. Load the song y ou w ish to edit (if it does not yet reside ...
Roland VA-76 - page 147

149 VA -7 6 – Editing 16-track songs Data T ype Allows y ou to select the data to be erased: All º : All editable parameters listed belo w . Note: Only note messages. Modul: Only modulation messages (CC01). PBend: Pitch Bend data (i.e. use of the BENDER/ MODULA TION lever). V olume: V olume (CC07) data. Expre: Only Expression messages (CC11). Pa ...
Roland VA-76 - page 148

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 150 From/F or— The From lev el allows you t o specify the position where the selected n umber of bars, beats, and clocks is to be inse r ted. For , on the othe r hand, speciﬁes how man y bars, beats, and CPT s are to be inserted. Bar , Beat, CPT — See page 148. Time S ig nature— I ...
Roland VA-76 - page 149

151 VA -7 6 – Editing 16-track songs Note: A similar syste m is also available for other par ame- ters. See “ Change” on page 152. Quantize U se this function if you c hose not to quantize your music during rec ording (see page 142) and now realiz e that the timing is not quite what y ou expected it to be. Quantizing after rec ording has the ...
Roland VA-76 - page 150

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 152 allows y ou to tidy up the timing and still keep an y irregularities (music!) the original may contain because it was not quantized. T r ack— See page 149. Y ou can also select the M track to shift tempo c hanges and SysEx messages. The initial settings (located at 1.1.0), howev er ...
Roland VA-76 - page 151

153 VA -7 6 – Editing 16-track songs T r ack (1~16, All)— Allo ws you to select the track whose data you wish to c hange. Though you can also select ALL, this should be done with great caution. If you look carefully at the la yout in the center of the display , you will notice that there are tw o kinds of changes that can be applied: From/T o ( ...
Roland VA-76 - page 152

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 154 CPT — This is where you specify the CPT position of the beginning and end of the track to be c opied. U nless you do not need all not es w ithin the last bar , you should k eep the default setting. Mode (R eplace, Merge)— Selects the Copy mode: Replace : The data in the select ed ...
Roland VA-76 - page 153

155 VA -7 6 – Style Converter Note: I f the original was referenced by a User Program and if you now w ish to use the new version (saved under a dif- ferent File N ame), do not forget to change the Song Link setting (s ee page 130). Initialize See page 145. The V A-76’ s St yle Con verter is an easy and intuiti ve tool for creating y our own M ...
Roland VA-76 - page 154

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 156 5. Press the [F rom] ﬁeld to go to the next pag e. Her e, y ou can listen to the song y ou w ish to c onv er t. Pr ess the [PLA Y ® ] ﬁeld to start playback. [ √√ B WD] and [FFW ®® ] are also available. The [ ON/OFF ] ﬁelds denote the tracks that c ontain data. Pr ess an ...
Roland VA-76 - page 155

157 VA -7 6 – Edit L yrics The new U ser Style w ill be copied t o the Disk User memor y . I f that memory doesn’ t yet contain data, the new Style will use the cur re nt time sig nature and tempo . I f you lik e, y ou can set the default tempo in the ﬁeld next to [K e y]. If the Disk User memory already contains data, the new Division(s) wil ...
Roland VA-76 - page 156

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 158 The display no w changes to: 5. Press the [Edit] ﬁeld. This is only possible while Song (or Arr anger) pla y- back is stopped. So be sure t o stop playback befor e pressing [Edit]. Otherw ise a “CAN’T EXECUTE” error message is displa yed. N ow , we ’r e going to import the t ...
Roland VA-76 - page 157

159 VA -7 6 – Edit L yrics 18. Repeat this at the q uar ter note where the sec ond line should be display ed. 19. K eep pressing [D A T A] on all beats where the sub- sequent text lines should appear . 20. Press the [ST OP ■ | √ ] ﬁeld when all L y rics data hav e been synchronized. The display no w again looks more or less as follo ws. If ...
Roland VA-76 - page 158

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 160 Exporting the L yrics data as text ﬁ le Her e’ s what you need to do to e xpor t the L yrics data contained in a Standar d MIDI File as text data. This may be useful for editing or printing the lyrics using your c omputer . Note: This only works if the Standar d MIDI File in the V ...
Roland VA-76 - page 159

161 VA -7 6 – Header Post Edit The Header P ost Edit function allows you to modify certain playback paramet ers of the song that is cur - rently in the V A -76’ s Song RAM memor y . These mod- iﬁcations are either global or track-speciﬁc in nature and can be sav ed to disk along with the song data. In a wa y , these settings ar e a “U ser ...
Roland VA-76 - page 160

VA -7 6 Owner’ s Manual — Song Composer (16-track, etc.) 162 PChange— (1~128) These are pr ogr am change mes- sages that allow y ou to select another T one or Drum Set. See page 222 for a list of the V A-76’ s T ones and Drum Sets. V olume (07)— Control change messages (CC07) that allow y ou to modify the P ar t v olume. P anpot— Contro ...
Roland VA-76 - page 161

163 VA -7 6 – Concept Y ou can program your own acc ompaniments ( Styles ) on the V A-76. Styles you program do not reside in ROM, which is wh y we call them U ser Styles , or Styles created b y a user (either you or someone else). There are thr ee ways of creating new Styles: • By con verting portions of a Standard MIDI File into an acco mpani ...
Roland VA-76 - page 162

VA -7 6 Owner’ s Manual — Programming User Styles 164 Looped divisions— Looped divisions are accompani- ments that are r epeated for as long as you do not select another division or press [ST ART/ST OP] to sto p Arranger playback. The V A -76 provides four pro- grammable looped divisions w ith three variations each (levels A and C of the Orch ...
Roland VA-76 - page 163

165 VA -7 6 – Recording User Styles from scratch Note: The follow ing sections also contain comme nts on what we are doing and possible options. If all you want to do is program a Style, just r ead e very thing that appears in bold. Y ou can come back to the related explanat ions when- ever there is something you do not understand. Selecting the ...
Roland VA-76 - page 164

VA -7 6 Owner’ s Manual — Programming User Styles 166 Working with clones On this page, you can activate thr ee clone functions that allow y ou to recor d one par t and c opy it to up to three divisions and three modes eac h. The “=” sign means that more than o ne pattern w ill be rec orded. 10. U se the [Mode] ﬁeld to select the mode(s), ...
Roland VA-76 - page 165

167 VA -7 6 – Recording User Styles from scratch T one selection Another important aspect is T one selection because the address (Gr oup, Bank, N umber , V ar iation) of the T ones and Drum Set you select is rec orded at the beginning of every division. 14. Press the [T one] ﬁeld in the left column. W e are about to program the drums using the ...
Roland VA-76 - page 166

VA -7 6 Owner’ s Manual — Programming User Styles 168 Furthermore, in User Style R ecord mode, all patterns are looped , so that the V A-76 k eeps playing them back until you pr ess the [ST ART/ST OP] button. A wrong number of measures (5 instead of 4, for example) is very likely to put y ou off, so d o take the time to set the pattern length b ...
Roland VA-76 - page 167

169 VA -7 6 – Recording User Styles from scratch 22. U se the [TEMPO/D A T A] dial to specify the num- ber of bars. Our pattern should be 4 measures long, so enter the value “4” . Note: Y ou could also spec ify a CPT value by pressing the [CPT] ﬁeld and using the [TEMPO/D A T A] dial. That CPT value (  = 120CPT) w ill be added to the Bar ...
Roland VA-76 - page 168

VA -7 6 Owner’ s Manual — Programming User Styles 170 Saving your Style to disk If you are serious about programming your o w n Styles, mak e it a habit to sav e them as frequently as possible. After all, if someone decided to turn off your V A-76 no w, you w ould lose ever ything you ha ve pro- grammed so far . That disk can also serve as back ...
Roland VA-76 - page 169

171 VA -7 6 – Recording User Styles from scratch Note: The on/off status only applies to the User Style mode. In normal A rranger playback mode, all t r acks w ill be played. In other words, this is a help funct ion. T o mute a part in A r r anger mode, see page 114. Her e is how to mu te tracks in U ser St yle mode: 1. On the U ser Sty le M aste ...
Roland VA-76 - page 170

VA -7 6 Owner’ s Manual — Programming User Styles 172 Another wa y of programming U ser St yles is to use parts from internal Styles in ROM or U ser St yles on (ﬂoppy , Zip) disk. The V A-76 allo ws you to: • Copy entir e St yles t o the St yle RAM memory (Disk Us e r ) • Copy the select ed division of one or all tracks • Copy just a fe ...
Roland VA-76 - page 171

173 VA -7 6 – Copying existing Styles 7. Press the [Listen] ﬁeld t o listen to the exc erp t y ou are about to c opy . Note: L iste n is not av ailable w hen you select ALL for one of the above entr ies. From Start by specifying the position of the ﬁrst event (or note) of the source track to be c opied. 8. Press the [Bar], [Beat], or [CPT] ? ...
Roland VA-76 - page 172

VA -7 6 Owner’ s Manual — Programming User Styles 174 W hen the data are copied, the display will tell y ou: Editing on the ﬂ y by r ecor ding Adding notes in r ealtime T o add notes to an existing part, press the [Merge] ﬁeld so that it is display ed in white, select the tr ack, and start recording b y pressing the [REC ● ] ﬁeld and th ...
Roland VA-76 - page 173

175 VA -7 6 – Editing User Styles If you select the ADrums track, the display looks slightly different: That is because you can o nly assig n Drum Sets to the ADrums track. 3. Select the division whose sett ings y ou w ish to change, and possibly also all clones (see page 165). 4. Press the [MER GE] ﬁeld in the bottom row . (Let us assume that ...
Roland VA-76 - page 174

VA -7 6 Owner’ s Manual — Programming User Styles 176 The Rev erb and Chorus settings represent Send values (see page 116). The effect settings ( T y pe, C har acte r , etc.) can only be sa ved to a U ser Pr og ram. In other wor ds, a M usic Style’ s character may change depend- ing on the U ser Pr og ram you select. Y ou can create inter est ...
Roland VA-76 - page 175

177 VA -7 6 – User Style Edit mode Time Signatur e Press the [Time Signature] ﬁ eld in the left column The Time S ig nature page allo ws you to c heck and set the time signature of cer tain or all patt erns. The time signature of the major (M), minor (m), and seventh (7) patterns must al ways be the same. This secur ity system helps y ou avoid ...
Roland VA-76 - page 176

VA -7 6 Owner’ s Manual — Programming User Styles 178 Erase [FUNCTION MENU] button → [User Style Composer] ﬁ eld → [Edit] ﬁ eld → [Erase] Erase allows y ou to selectively delete data either within a speciﬁed range of the pattern(s), or from the entire track(s). I n Data T ype ALL mode, Erase w ill substitute the required n umber of ...
Roland VA-76 - page 177

179 VA -7 6 – User Style Edit mode Insert [FUNCTION MENU] button → [User Style Composer] ﬁ eld → [Edit] ﬁ eld → [Insert] The Insert function allows y ou to insert space in an existing pattern. This means that all data lying behind the position calculated by the “For” parameter are shifted further towar ds the end of the pattern, eff ...
Roland VA-76 - page 178

VA -7 6 Owner’ s Manual — Programming User Styles 180 Quantize [FUNCTION MENU] button → [User Style Composer] ﬁ eld → [Edit] ﬁ eld → [Quantize] The Quantize function can be used after r ecording a part if you don ’t feel comfortable with the timing of what you pla yed. If only certain notes in a giv en time range need to be quantize ...
Roland VA-76 - page 179

181 VA -7 6 – User Style Micro mode Select this mode whenever y ou need to change just one aspect of an otherwise perfect U ser St yle (or co p- ied ROM/Disk U ser St yle). In this section, we will use the word ev ent for any kind of message (identical to MIDI messag es that cause the Arranger to play or set something). A n e v ent is thus a comm ...
Roland VA-76 - page 180

VA -7 6 Owner’ s Manual — Programming User Styles 182 Status column— This c olumn contains all the mes- sage ty pes y ou can assig n to an ev ent. See page 177 for details. U se the [TEMPO/D A T A] dial for selecting an event. Don ’t look for CC64 (H old or Sustain) events because you w on ’t ﬁnd an y . The use o f the pedal connected t ...
Roland VA-76 - page 181

183 VA -7 6 – User Style Micro mode Status— U se the [TEMPO/D A T A] dial to select the Status of the new event (not e, c ontrol change, etc., see the table on page 177). Y ou may ha ve to press the [ Ty p e ] ﬁeld if it is not displa yed in white. Then press the [ Va l u e ] ﬁeld and specify the “identity” of the event (CC number , not ...
Roland VA-76 - page 182

VA -7 6 Owner’ s Manual — Programming User Styles 184 Copy Mix [FUNCTION MENU] button → [User Style Composer] ﬁ eld → [Micro] ﬁ eld → [Copy Mix] The Copy M ix function allows you t o copy the selected events t o another position. This means that the events in question will be used twice. From , T o— See “M ove Mix” for details. ...
Roland VA-76 - page 183

185 VA -7 6 – User Style Utility Style tracks” on page 172 for a step-by-step tour o f this function. The following does not present all parame- ters and settings a vailable for the Copy function. T r ack (ADrums, ABass, Ac c1~6, ALL)— Allows y ou to select the track whose data y ou w ish to c opy (the sour ce pattern). Do not forget to selec ...
Roland VA-76 - page 184

VA -7 6 Owner’ s Manual — Miscellaneous 186 13.1 Choosing the performance functions (Contr ollers) The V A-76 pr ov ides sev er al built-in c ontrollers as well as three sock ets for connecting optional c ontrollers that will make your lif e a lot easier . I t would thus be a good idea to bro wse through this chapter . The assign- ments you mak ...
Roland VA-76 - page 185

187 VA -7 6 – Choosing the performance functions (Controllers) hand outside the D Beam ’ s range, both Resonanc e and TVF Cu toff return to their original values (“0”= no change). Note: I f TVF C utoff is already set to “+63” , you cannot increase it using the D Beam Controller . In that case, the following opt ion is probably more usef ...
Roland VA-76 - page 186

VA -7 6 Owner’ s Manual — Miscellaneous 188 Formant U p/Down— These two options allow you t o change the character of the selected V ariPhrase. See page 48 for details. This function can also be con- trolled via an on-screen slider (see page 49). C ut&Reso U p and Formant U p— This is a com- bination of two functions c over ed earlier a ...
Roland VA-76 - page 187

189 VA -7 6 – Choosing the performance functions (Controllers) T ouch Contr ol (Ribbon) This page contains the functions that can be assigned to the T ouch Contr ol (also called “Ribbon ”). With the ex ception of Off (that deacti vates the Ribbon control- ler), the parameters are identical to the ones of the D Beam contr oller (see page 186). ...
Roland VA-76 - page 188

VA -7 6 Owner’ s Manual — Miscellaneous 190 LFO2 Rate, LFO2 Pitch, LFO2 TVF , LFO2 TV A— Same setting range and meaning as the corresponding LFO1 parameters. Not e that not all T ones use a second LFO , which is why these settings do not al ways yield the desired effect. Note: Except for Rate, the LFO parameters are absolute se t- tings that ...
Roland VA-76 - page 189

191 VA -7 6 – Choosing the performance functions (Controllers) Foot Switch This parameter allo ws you to specify the function of the optional DP -2, DP -6, or BOSS FS-5U connected to the FOO T SWITCH sock et on the rear panel. The default setting is Start/Stop , which allo ws you to start and stop Arranger playback. Note also the Soft and Sostenu ...
Roland VA-76 - page 190

VA -7 6 Owner’ s Manual — Miscellaneous 192 N ote the Soft and Sostenuto options as well as the pos- sibility to select Hold. Though there is a dedicated SUST AIN FOOTSWIT CH jack that serves the same purpose, y ou may want to select H old for certain U ser Pr og rams. Hold Lo wer1— In this case, the footswitch performs the same function as t ...
Roland VA-76 - page 191

193 VA -7 6 – FC-7 & Pad parameters Note: It is perfectly possible to set the Up value to “127” and the Down value to “0” , so that the selected part only sounds when the Expression pedal is up (closed). The Expression function can also be used for some clever effects. Instead of alternating between Up per1 and U pper2 by var ying you ...
Roland VA-76 - page 192

VA -7 6 Owner’ s Manual — Miscellaneous 194 Orchestrator 1~4— These functions allo w you to select the corresponding Or chestrator level (see page 62). Break M ute— This function can only be ac cessed via the FC-7. W hen you press the assigned footswitch, Arranger playback will be muted for the r emainder of the current measure. This is gre ...
Roland VA-76 - page 193

195 VA -7 6 – Global parameters (for the entire V A-76) MBass/K eyboard Arr anger— Allows y ou to set the Arranger Chord parameter to “Off ” (chord r ecogni- tion as well as ABS recognition off, see page 102) and, at the same time, select the SPLIT K e yboar d mode and activate the M.Bass part – and vice ve rsa. Note: P ressing the P AD b ...
Roland VA-76 - page 194

VA -7 6 Owner’ s Manual — Miscellaneous 196 Factory Resume The F actor y Resume ﬁelds allo w you to select all or only certain settings of the “Free P anel” U ser Program so as to initialize the section in q uestion. Wh y would you need such a function sinc e you can also select the “Free P anel” memor y by simultaneously pressing U s ...
Roland VA-76 - page 195

197 VA -7 6 – MIDI in general 14.1 MIDI in general MIDI connectors MIDI messages are transmitt ed and receiv ed using three c onnectors and special MIDI cables: MIDI IN— This connect or receiv es messages from other MIDI devices. MIDI OUT — This connector transmits MIDI mes- sages generated on your V A -76 MIDI THR U— This connector “echo ...
Roland VA-76 - page 196

VA -7 6 Owner’ s Manual — MIDI 198 Control change messages These messages contr ol parameters such as modula- tion and pan. The function of a message is determined by its co ntrol change (e.g. ID) n umber . Modulation (CC01) *— This message c ontrols vib rat o. V olume (CC07) *— This message controls the v olume of a part. When this messag ...
Roland VA-76 - page 197

199 VA -7 6 – MIDI in general All N ote Off message *— This message causes a note- off message to be sent t o each note of the speciﬁed channel that is currently on. Ho wever , if Hold 1 or Sostenut o are on, the sound will contin ue until these are turned off. Reset All Controllers *— This message r etur ns co n- troller values (modulation ...
Roland VA-76 - page 198

VA -7 6 Owner’ s Manual — MIDI 200 14.2 Pr eparations for using the MIDI functions Receiving MIDI data (RX) T o take advantage of the V A-76’ s sounds while playing on an external k eyboard or using a computer or sequencer , y ou must make the follo w ing co nnections: T ransmitting MIDI data (TX) T o have another instrument sound in r espons ...
Roland VA-76 - page 199

201 VA -7 6 – Keyboard MIDI, Style MIDI, Song MIDI exactly like the F ree P anel buffer for User P rograms: it is a buffer memor y where y our changes are stor ed temporarily . The V A-76’ s ROM chip also c ontains pre- set settings for this memory : those are the o nes you select by pressing the [F actory Resume] ﬁeld. See page 196 for a mor ...
Roland VA-76 - page 200

VA -7 6 Owner’ s Manual — MIDI 202 equipped with a Soft Thru (MIDI echo) function – and only if (i) you connect the V A -76’ s MIDI IN and OUT connect ors to the external sequencer or c om- puter , and (ii) use the V A -76 as MIDI master keyboard for sequencing – you ma y have t o set this parameter to Off to a void that each note is soun ...
Roland VA-76 - page 201

203 VA -7 6 – Utilities MIDI The V ar iPhrase part is an altogether different to ne generator. That explains why it doesn ’t respond t o CC32 messages and wh y the two ﬁlter pages look a lit- tle different: See abov e for an explanation of these parameters. The new or different functions are: CC16, 17, 18— Co r respond t o the [Pitch], [Tim ...
Roland VA-76 - page 202

VA -7 6 Owner’ s Manual — MIDI 204 Style RX Sync, Song RX Sync The Style RX Sync and Song RX S ync parameters are used to specify whether and ho w the Arranger or Composer should be synchr onized to external sequencers or drum machines. The available options are: Internal— The Ar ranger or Song Composer will fol- low its o w n internal te mpo ...
Roland VA-76 - page 203

205 VA -7 6 – Utilities MIDI Style selection via MIDI The MIDI address of a M usic St yle consists o f three elements: a P rogr am Change n umber , a CC00 num- ber , and a CC32 number . CC00 and CC32 are Bank Select messages. The values assigned to CC00 and CC32 deﬁne the Style, whereas the Program Change number deﬁnes the pattern (Intr o, En ...
Roland VA-76 - page 204

VA -7 6 Owner’ s Manual — MIDI 206 36 being used and sent to the MIDI OUT port. This, of course, depends on the T one you assign to the U pper1 par t. In A bs olute mode, howev er , the MIDI not e number sent to the MIDI OUT port will be the one assigned to the key y ou press (e.g. note n umber 60). The advan- tage of Absolute is that y ou can ...
Roland VA-76 - page 205

207 VA -7 6 – MIDI Sets 14.5 MIDI Sets MIDI Sets are memories for the settings you mak e in MIDI mode. The V A-76 has eight MIDI Set memories on board that y ou can use to change your MIDI c on- ﬁguration. Y ou can also sav e your MIDI Sets to disk and load them whenever necessary . Furthermore, y ou can link a MIDI Set to a U ser Pr og ram (se ...
Roland VA-76 - page 206

VA -7 6 Owner’ s Manual — MIDI 208 3. On the display page that appears no w , press the [Sav e] ﬁeld in the bottom row and the [Midi Set] ﬁeld in the left column. Before sa v ing a MIDI Set to disk, you should name it. Pr ess the [Name] ﬁeld and choose a name that t ells you something about the c ontents. ( Y ou can only pro- gram a “Fi ...
Roland VA-76 - page 207

209 VA -7 6 – Autoload This is where y ou w ill ﬁnd functions and parameters relating to sa ving , loading, deleting ﬁles, and to for- matting new disks or disks previously used on other instruments or dev ices. The wor d “ disk” refers t o both ﬂoppy and Zip disks. 15.1 Autoload The V A-76 pr ov ides an A utoload function for the fol- ...
Roland VA-76 - page 208

VA -7 6 Owner’ s Manual — Disk functions 210 Selection— Press the ﬁeld of the song you wish to load. If the desired song is not displa yed, use the [ o ][ k ] ﬁelds to scr oll through the list of a vailable songs. Y ou can also use the [TEMPO/D A T A] dial. Execut e— Press this ﬁeld to c onﬁrm your settings and load the data. Load U ...
Roland VA-76 - page 209

211 VA -7 6 – Disk Save (saving data to disk) 15.3 Disk Save (saving data to disk) In this manual and while designing the V A -76, we tried to make a clear distinction betw een saving and writi ng / me morizing data. The terms writ e / Memorize are used to describe actions that cause c er tain settings to be sa ved to an internal memory . Sa ve , ...
Roland VA-76 - page 210

VA -7 6 Owner’ s Manual — Disk functions 212 Save MIDI Set [FUNCTION MENU] → [Disk] ﬁ eld → [Save] ﬁ eld → [Midi Set] ﬁ eld This function allows y ou to sav e all 8 MIDI Sets as a set. The Size value indicates the capacity required to sav e the “MIDI Set-Set” to disk, while Free Disk tells you something about the r emaining disk ...
Roland VA-76 - page 211

213 VA -7 6 – Delete 15.4 Delete [FUNCTION MENU] → [Disk] ﬁ eld → [Delete] ﬁ eld The Delete function allows y ou to erase the selected ﬁle, which may be necessary if the “Disk Full” message is display ed when you tr y to sa ve a ﬁle to disk. Be care- ful to select the right ﬁle ty pe using the ﬁelds in the left column befor e ...
Roland VA-76 - page 212

VA -7 6 Owner’ s Manual — Disk functions 214 Copy functions Y ou can copy from Z ip to ﬂoppy (and vice versa), or from one ﬂoppy disk t o another ﬂoppy disk, which requires c hang ing disks. Let’ s have a look at a few hands-on examples: W ARNING— Copying ﬁles from a disk means that the V A-76’ s St yle RAM and Song RAM me mor ies ...
Roland VA-76 - page 213

215 VA -7 6 – Disk Utility tected Flopp y Disk” message appears again. In that case, go back to step (5) and contin ue until the mes- sage “OK Function Complet e” is displa yed. 9. Press [EXIT] t o jump to the Master page (see page 24). There is no function for co py ing entir e Zip disks. U se the [ALL FILES] ﬁeld to select all ﬁles of ...
Roland VA-76 - page 214

VA -7 6 Owner’ s Manual — Disk functions 216 4. Insert the ﬂoppy disk that should contain the c op- ied data into the ﬂoppy driv e. 5. Press the ﬁeld that c orresponds to the ﬁle ty pe y ou wish to copy . T o copy Styles, for example, pr ess the [Style] ﬁeld: 6. Press the [ZIP] ﬁeld belo w the “Fr om ” message (“ copy from Zip ...
Roland VA-76 - page 215

217 VA -7 6 – Disk Utility 8. Press the [PR OCEED] ﬁeld. For Styles, and Songs, y ou can enter two names: the File N ame and the Style/Song Name. The ﬁrst is the ﬁle’ s “ address” on the disk, while the sec ond some- times appears on the V A-76’ s display (see also page 68). For the remaining ﬁles, only the File N ame can be set. ...
Roland VA-76 - page 216

VA -7 6 Owner’ s Manual — Speci ﬁ cations 218 16. Speciﬁcations V A-76 V -Arranger Keyboard Ke y b o a r d 76 keys, weighted synthesizer action, velocity-sensitive, Aftertouch Control lers T empo/Data dial, assig nable P AD buttons x2, D Beam Contr oller , Bender/M odulation Lever , T ouch Controller (Ribbon C ontroller), M aster V olume kn ...
Roland VA-76 - page 217

219 VA -7 6 – Disk Utility Below please ﬁnd a list of the M-FX T ypes available on the V A-76. As stated on page 123, each ty pe pro v ides tw o par am- eters that can be co ntrolled via the M-V alue 1 and M-V alue 2 sliders in the displa y . P arameters indicated with an asterisk (*) can also be contr olled v ia an optional footswitch. See “ ...
Roland VA-76 - page 218

VA -7 6 Owner’ s Manual — M-FX T ypes & controllable parameters 220 CHORUS EFFECTS “ D ” means dry (no effect), while “ E ” means effect (no unprocessed signal); “ 0 ” refers to the level. 28 Hexa Cho M-V al 1 Rate 0.05~10.0 Hz M-V al 2 ° Balance D>0E~D0<E Hexa Chorus uses a six-phase chorus (six layers of chorused sound) ...
Roland VA-76 - page 219

221 VA -7 6 – Disk Utility 55 DS → Delay M-V al 1 DS Pan L63 ~0~ R63 M-V al 2 ° DlyBalance D>0E~D0<E This effect connects a Distortion effect and a Delay in series. 56 EH → Chors M-V al 1 EH Sens 0~127 M-V al 2 ° ChoBalance D>0E~D0<E This effect connects an Enhancer and a Chorus in series. 57 EH → Flger M-V al 1 EH Sens 0~127 ...
Roland VA-76 - page 220

VA -7 6 Owner’ s Manual — Reference 222 18.1 T ones GBN Var PC CC00 CC32 Name A11 1 0 4 Piano 1 1 1 1 4 UprightPiano 2 1 2 4 Mild Piano 3 1 8 4 Piano 1w 4 1 9 4 Mild Piano w 5 1 16 4 European Pf 6 1 24 4 Piano + Str. 7 1 25 4 Piano + Str2 8 1 26 4 Piano+Choir1 9 1 27 4 Piano+Choir2 10 1 45 4 MonoAc.Piano 11 1 46 4 St.AcPiano 2 12 1 47 4 St.AcPi ...
Roland VA-76 - page 221

223 VA -7 6 – T ones GBN Var PC CC00 CC32 Name 3 31 3 4 Distortion : 4 31 4 4 Dist.Fast : 5 31 5 4 Attack Dist 6 31 8 4 Feedback Gt. 7 31 9 4 Feedback Gt2 8 31 16 4 Power Guitar 9 31 17 4 Power Gt.2 10 31 18 4 5th Dist. 11 31 24 4 Rock Rhythm 12 31 25 4 Rock Rhythm2 13 31 26 4 Dist Rtm GTR 14 31 48 4 v Dist.Gt 15 31 49 4 v Dazed Gtr 16 31 50 4 v ...
Roland VA-76 - page 222

VA -7 6 Owner’ s Manual — Reference 224 GBN Var PC CC00 CC32 Name 15 56 19 4 Bam Hit 16 56 20 4 Bit Hit 17 56 21 4 Bim Hit 18 56 22 4 Technorg Hit 19 56 23 4 Rave Hit 20 56 24 4 Strings Hit 21 56 25 4 Stack Hit 22 56 26 4 Industry Hit 23 56 27 4 Clap Hit 24 56 126 4 Tenor Sax 25 56 127 4 Cello 2 A81 57 0 4 Trumpet 1 57 1 4 Trumpet 2 2 57 2 4 Tr ...
Roland VA-76 - page 223

225 VA -7 6 – T ones GBN Var PC CC00 CC32 Name 7 89 7 4 260HarmPad 8 89 44 4 EP Heaven 9 89 45 4 HeavenKey 10 89 46 4 BriteSawKey 11 89 47 4 VoxKey1 12 89 127 4 Trumpet 1 B42 90 0 4 Warm Pad 1 90 1 4 Thick Matrix 2 90 2 4 Horn Pad 3 90 3 4 Rotary Strng 4 90 4 4 OB Soft Pad 5 90 5 4 Sine Pad 6 90 6 4 OB Soft Pad2 7 90 8 4 Octave Pad 8 90 9 4 Stack ...
Roland VA-76 - page 224

VA -7 6 Owner’ s Manual — Reference 226 GBN Var PC CC00 CC32 Name B78 120 0 4 Reverse Cym. 1 120 1 4 Reverse Cym2 2 120 2 4 Reverse Cym3 3 120 3 4 Reverse Cym4 4 120 8 4 Rev.Snare 1 5 120 9 4 Rev.Snare 2 6 120 16 4 Rev.Kick 1 7 120 17 4 Rev.ConBD 8 120 24 4 Rev.Tom 1 9 120 25 4 Rev.Tom 2 10 120 26 4 Rev.Tom 3 11 120 27 4 Rev.Tom 4 12 120 40 4 R ...
Roland VA-76 - page 225

227 VA -7 6 – T ones GBN Var PC CC00 CC32 Name A41 25 0 3 Nylon-str.Gt 1 25 8 3 Ukulele 2 25 16 3 Nylon Gt.o 3 25 24 3 Velo Harmnix 4 25 32 3 Nylon Gt.2 5 25 40 3 Lequint Gt. 6 25 126 3 Fingered Bs 7 25 127 3 Syn Brass 1 A42 26 0 3 Steel-str.Gt 1 26 8 3 12-str.Gt 2 26 9 3 Nylon+Steel 3 26 16 3 Mandolin 4 26 17 3 Mandolin 2 5 26 18 3 MandolinTrem ...
Roland VA-76 - page 226

VA -7 6 Owner’ s Manual — Reference 228 GBN Var PC CC00 CC32 Name B14 68 0 3 Baritone Sax 1 68 1 3 Bari. Sax : 2 68 127 3 Elec Bass 2 B15 69 0 3 Oboe 1 69 8 3 Oboe Exp. 2 69 16 3 Multi Reed 3 69 127 3 Slap Bass 1 B16 70 0 3 English Horn 1 70 127 3 Slap Bass 2 B17 71 0 3 Bassoon 1 71 127 3 Fretless 1 B18 72 0 3 Clarinet 1 72 8 3 Bs Clarinet 2 72 ...
Roland VA-76 - page 227

229 VA -7 6 – T ones GBN Var PC CC00 CC32 Name 4 119 11 3 606 Tom 5 119 12 3 909 Tom 6 119 127 3 Taiko Rim B78 120 0 3 Reverse Cym. 1 120 1 3 Reverse Cym2 2 120 2 3 Reverse Cym3 3 120 8 3 Rev.Snare 1 4 120 9 3 Rev.Snare 2 5 120 16 3 Rev.Kick 1 6 120 17 3 Rev.ConBD 7 120 24 3 Rev.Tom 1 8 120 25 3 Rev.Tom 2 9 120 127 3 Cymbal B81 121 0 3 Gt.FretNoi ...
Roland VA-76 - page 228

VA -7 6 Owner’ s Manual — Reference 230 GBN Var PC CC00 CC32 Name 10 40 126 2 Organ 1 11 40 127 2 Funny Vox A61 41 0 2 Violin 1 41 8 2 Slow Violin 2 41 16 2 Folk Violin 3 41 17 2 FolkViolnVb 4 41 126 2 Organ 2 5 41 127 2 Echo Bell A62 42 0 2 Viola 1 42 126 2 Organ 1 2 42 127 2 Ice Rain A63 43 0 2 Cello 1 43 126 2 Organ 1 2 43 127 2 Oboe 2001 A6 ...
Roland VA-76 - page 229

231 VA -7 6 – T ones GBN Var PC CC00 CC32 Name B74 116 0 2 Woodblock 1 116 8 2 Castanets 2 116 127 2 Elec Perc 1 B75 117 0 2 Taiko 1 117 8 2 Concert BD 2 117 127 2 Elec Perc 2 B76 118 0 2 Melo. Tom 1 1 118 1 2 Real Tom 2 118 8 2 Melo. Tom 2 3 118 9 2 Rock Tom 4 118 127 2 Taiko B77 119 0 2 Synth Drum 1 119 8 2 808 Tom 2 119 9 2 Elec Perc 3 119 127 ...
Roland VA-76 - page 230

VA -7 6 Owner’ s Manual — Reference 232 GBN Var PC CC00 CC32 Name A85 61 0 1 French Horn 1 61 1 1 Fr.Horn 2 2 61 126 1 Brass 2 3 61 127 1 Guitar 2 A86 62 0 1 Brass 1 1 62 8 1 Brass 2 2 62 126 1 Brass 2 3 62 127 1 Elec Gtr 1 A87 63 0 1 Syn.Brass 1 1 63 8 1 Syn.Brass 3 2 63 16 1 Analog Brs1 3 63 126 1 Brass 1 4 63 127 1 Elec Gtr 2 A88 64 0 1 Syn. ...
Roland VA-76 - page 231

233 VA -7 6 – Drum Sets 18.2 Drum Sets C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 32 ...
Roland VA-76 - page 232

VA -7 6 Owner’ s Manual — Reference 234 (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 (85Rm Snare1) Std.1 Snare1 Std.1 Snare2 Std.2 Snare1 Std.2 Snare2 Tight Snare Standard SN1 LD Snare M LD Snare C Jazz Snare 1 Jazz Snare 2 Room Snare 1 Room Snare 2 D ...
Roland VA-76 - page 233

235 VA -7 6 – Drum Sets C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 32 34 PC: 13 [CC3 ...
Roland VA-76 - page 234

VA -7 6 Owner’ s Manual — Reference 236 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 235

237 VA -7 6 – Drum Sets (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 (---) Techno Hit Philly Hit Shock Wave Lo Fi Rave Bam Hit Bim Hit TapeRewind Phono Noise Dance Snare1 Power Snare2 Elec Snare 1 Dance Snare2 Elec Snare 2 Elec. Snare Elec Snare 3 66sn2 ...
Roland VA-76 - page 236

VA -7 6 Owner’ s Manual — Reference 238 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 237

239 VA -7 6 – Drum Sets (CC32=122 only via MIDI) C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 2 ...
Roland VA-76 - page 238

VA -7 6 Owner’ s Manual — Reference 240 (CC32=122 only via MIDI) (CC32= 119 only via MIDI) (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 (---) --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- - ...
Roland VA-76 - page 239

241 VA -7 6 – Drum Sets (CC32= 119 only via MIDI) (CC32=122 only via MIDI) C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 ...
Roland VA-76 - page 240

VA -7 6 Owner’ s Manual — Reference 242 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 241

243 VA -7 6 – Drum Sets (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 PC: 121 [CC32: 122] SFX 1 kit PC: 122 [CC32: 122] SFX 2 kit 3 PC: 2 [CC32: 3] STANDARD 2 PC: 1 [CC32: 3] STANDARD 1 PC: 49 [CC32: 119] classic kit PC: 41 [CC32: 119] brush kit (---) -- ...
Roland VA-76 - page 242

VA -7 6 Owner’ s Manual — Reference 244 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 243

245 VA -7 6 – Drum Sets C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 32 34 PC: 41 [CC3 ...
Roland VA-76 - page 244

VA -7 6 Owner’ s Manual — Reference 246 (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 (---) --- --- --- [#2] Brush Tap 1 [#2] Brush Tap 2 [#2] Brush Slap 1 [#2] Brush Slap 2 [#2] Brush Slap 3 [#2] Brush Swirl 1 [#2] Brush Swirl 2 [#2] Brush Long Swirl ...
Roland VA-76 - page 245

247 VA -7 6 – Drum Sets C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 32 34 PC: 1 [CC32 ...
Roland VA-76 - page 246

VA -7 6 Owner’ s Manual — Reference 248 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 247

249 VA -7 6 – Drum Sets (C7) (96) 98 100 101 103 105 107 97 99 102 104 106 C8 108 110 112 113 115 117 119 109 111 114 C9 G9 120 122 124 125 127 121 123 126 116 118 (Cabasa Down) Claves High Wood Block Low Wood Block --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- (---) --- --- --- -- ...
Roland VA-76 - page 248

VA -7 6 Owner’ s Manual — Reference 250 C2 36 38 40 41 43 45 47 37 39 42 44 46 C3 48 50 52 53 55 57 59 49 51 54 56 58 C4 60 62 64 65 67 69 71 61 63 66 68 70 C5 72 74 76 77 79 81 83 73 75 78 80 82 C6 84 C7 96 86 88 89 91 93 95 85 87 90 92 94 C0 12 14 16 17 19 21 23 13 15 18 20 22 C – 1 0 2 4 5 7 9 11 1 3 6 8 10 C1 24 26 28 29 31 33 35 25 27 30 ...
Roland VA-76 - page 249

251 VA -7 6 – Internal Music Styles 18.3 Inter nal Music Styles ROCK A11 LightRk1 4/4  = 86 A12 LightRk2 4/4  = 100 A13 LightRk3 4/4  = 105 A14 PowerRk1 4/4  = 120 A15 PowerRk2 4/4  = 130 A16 PowerRk3 4/4  = 136 A17 Rock 4/4  = 172 A18 ShRock 4/4  = 135 DANCE A21 House 1 4/4  = 134 A22 House 2 4/4  = 136 A23 Dance 1 ...
Roland VA-76 - page 250

VA -7 6 Owner’ s Manual — Reference 252 18.4 Chor d Intelligence Cm7 ( 5 ) C C# D E E F CM7 C#M7 DM7 E M7 EM7 FM7 C7 C#7 D7 E 7 E7 F7 Cm C#m Dm E m Em Fm Cm7 C#m7 Dm7 E m7 Em7 Fm7 Cdim C#dim Ddim E dim Edim Fdim Dm7 ( 5 ) Em7 ( 5 ) Caug C#aug Daug E aug Eaug Faug Csus4 C#sus4 Dsus4 E sus4 Esus4 Fsus4 C7sus4 C#7sus4 D7sus4 E 7sus4 E7sus4 F7sus4 ...
Roland VA-76 - page 251

253 VA -7 6 – Chord Intelligence F# G A A B B F#M7 GM7 A M7 AM7 B M7 BM7 F#7 G7 A 7 A7 B 7 B7 F#m Gm A m Am B m Bm F#m7 Gm7 A m7 Am7 B m7 Bm7 F#dim Gdim A dim Adim B dim Bdim Gm7 ( 5 ) Am7 ( 5 ) Bm7 ( 5 ) F#aug Gaug A aug Aaug B aug Baug F#sus4 Gsus4 A sus4 Asus4 B sus4 Bsus4 F#7sus4 G7sus4 A 7sus4 A7sus4 B 7sus4 B7sus4 B m7 ( 5 ) A m7 ( 5 ) F#m7 ...
Roland VA-76 - page 252

VA -7 6 Owner’ s Manual — Reference 254 18.5 MIDI Implementation Chart [V-Arranger Keyboard] Date: January 2001 Model: VA-76 Version: 1.00 Function... T ransmitted Recogniz ed Remar ks Basic Channel Default Changed 1~16 1~16, Off 1~16 1~16, Off 32 Parts 1 V ariPhraseP art *3 1 Audio In P ar t *3 4 Logical Parts Mode Default Message Altered Mode ...
Roland VA-76 - page 253

255 VA -7 6 – Owner ’ s Manual Numerics 00 Free Panel 128 1 Ch Limit 205 1 Channel Rx 205 1st Style 63 2 Ch Limit 205 2 Channel Rx 205 2nd Drum Track 145 2nd Style 63 2nd Trk 66 3.5", see Floppy A A. Drums 95 A.Bass 95 On/Off 187 A/a 68 A: 135 , 156 Abort 168 ABs&ADr On/Off 187 Absolute 205 ACC 104 Acc 95 Acc&ABs On/Off 187 Accomp ...
Roland VA-76 - page 254

Index 256 F Factory 28 , 85 Resume 196 Fade 195 Fade In/Out 78 Faders (VariPhrase control) 49 Family 105 Fast 171 , 181 Favorites 40 FC-7 8 , 54 FDD 111 , 215 Style Options 110 FFW 31 , 135 File Name 109 , 139 Fill 26 Half Bar 97 , 194 Rit value 104 Ritardando 104 To Previous 98 To Var/Or 187 Filter 202 , 204 , 205 TVF Cutoff 126 User Program 129 F ...
Roland VA-76 - page 255

257 VA -7 6 – Owner ’ s Manual Mixer 113 16-track 144 User Style 175 Mode Copy 154 Portamento 80 , 90 Recording 142 VariPhrase 82 Modul 149 Modulation 52 , 125 , 188 , 198 Mono 46 , 90 Morphing 63 , 98 Move Mix 183 Music Style 95 Definiton 59 Selecting 59 Start & Stop 95 Mute 16-track 147 Arranger parts 114 Song tracks 136 User Style parts ...
Roland VA-76 - page 256

Index 258 Source 71 , 172 Source pattern 153 , 185 Space 68 Specifications 218 Speed Options 171 , 181 Split Arranger 35 Keyboard Mode 36 UP2 to Left 88 Upper2 86 Standard 102 MIDI File 67 , 132 Start, portamento 80 START/STOP 25 Start/Stop 95 Startup 196 MIDI Set 207 User Program 131 Status 182 Step 73 , 81 Loop 192 Stereo position 114 StlVolum 20 ...
Roland VA-76 - page 257

259 VA -7 6 – Reference Notes VA-76.book Page 259 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 258

VA -7 6 Owner’ s Manual — Reference 260 Notes VA-76.book Page 260 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 259

261 VA -7 6 – Reference Notes VA-76.book Page 261 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 260

VA -7 6 Owner’ s Manual — Reference 262 Notes VA-76.book Page 262 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 261

263 VA -7 6 – Reference Notes VA-76.book Page 263 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 262

VA -7 6 Owner’ s Manual — Reference 264 Notes VA-76.book Page 264 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 263

265 VA -7 6 – Reference Notes VA-76.book Page 265 Friday, January 12, 2001 12:35 PM ...
Roland VA-76 - page 264

VA -7 6 Owner’ s Manual — Reference 266 Information VA-76.book Page 266 Friday, January 12, 2001 12:35 PM ...

Manufacturer Roland Category Electronic Keyboard

Documents that we receive from a manufacturer of a Roland VA-76 can be divided into several groups. They are, among others:
- Roland technical drawings
- VA-76 manuals
- Roland product data sheets
- information booklets
- or energy labels Roland VA-76
All of them are important, but the most important information from the point of view of use of the device are in the user manual Roland VA-76.

A group of documents referred to as user manuals is also divided into more specific types, such as: Installation manuals Roland VA-76, service manual, brief instructions and user manuals Roland VA-76. Depending on your needs, you should look for the document you need. In our website you can view the most popular manual of the product Roland VA-76.

Similar manuals

Roland E-100

66 pages
Roland HP103

56 pages
Roland V-Piano

116 pages
Roland 5

82 pages

A complete manual for the device Roland VA-76, how should it look like?
A manual, also referred to as a user manual, or simply "instructions" is a technical document designed to assist in the use Roland VA-76 by users. Manuals are usually written by a technical writer, but in a language understandable to all users of Roland VA-76.

A complete Roland manual, should contain several basic components. Some of them are less important, such as: cover / title page or copyright page. However, the remaining part should provide us with information that is important from the point of view of the user.

1. Preface and tips on how to use the manual Roland VA-76 - At the beginning of each manual we should find clues about how to use the guidelines. It should include information about the location of the Contents of the Roland VA-76, FAQ or common problems, i.e. places that are most often searched by users in each manual
2. Contents - index of all tips concerning the Roland VA-76, that we can find in the current document
3. Tips how to use the basic functions of the device Roland VA-76 - which should help us in our first steps of using Roland VA-76
4. Troubleshooting - systematic sequence of activities that will help us diagnose and subsequently solve the most important problems with Roland VA-76
5. FAQ - Frequently Asked Questions
6. Contact detailsInformation about where to look for contact to the manufacturer/service of Roland VA-76 in a specific country, if it was not possible to solve the problem on our own.

Do you have a question concerning Roland VA-76?

Use the form below

If you did not solve your problem by using a manual Roland VA-76, ask a question using the form below. If a user had a similar problem with Roland VA-76 it is likely that he will want to share the way to solve it.

Manual Roland VA-76

Summary

Roland VA-76 - page 1

Roland VA-76 - page 2

Roland VA-76 - page 3

Roland VA-76 - page 4

Roland VA-76 - page 5

Roland VA-76 - page 6

Roland VA-76 - page 7

Roland VA-76 - page 8

Roland VA-76 - page 9

Roland VA-76 - page 10

Roland VA-76 - page 11

Roland VA-76 - page 12

Roland VA-76 - page 13

Roland VA-76 - page 14

Roland VA-76 - page 15

Roland VA-76 - page 16

Roland VA-76 - page 17

Roland VA-76 - page 18

Roland VA-76 - page 19

Roland VA-76 - page 20

Roland VA-76 - page 21

Roland VA-76 - page 22

Roland VA-76 - page 23

Roland VA-76 - page 24

Roland VA-76 - page 25

Roland VA-76 - page 26

Roland VA-76 - page 27

Roland VA-76 - page 28

Roland VA-76 - page 29

Roland VA-76 - page 30

Roland VA-76 - page 31

Roland VA-76 - page 32

Roland VA-76 - page 33

Roland VA-76 - page 34

Roland VA-76 - page 35

Roland VA-76 - page 36

Roland VA-76 - page 37

Roland VA-76 - page 38

Roland VA-76 - page 39

Roland VA-76 - page 40

Roland VA-76 - page 41

Roland VA-76 - page 42

Roland VA-76 - page 43

Roland VA-76 - page 44

Roland VA-76 - page 45

Roland VA-76 - page 46

Roland VA-76 - page 47

Roland VA-76 - page 48

Roland VA-76 - page 49

Roland VA-76 - page 50

Roland VA-76 - page 51

Roland VA-76 - page 52

Roland VA-76 - page 53

Roland VA-76 - page 54

Roland VA-76 - page 55

Roland VA-76 - page 56

Roland VA-76 - page 57

Roland VA-76 - page 58

Roland VA-76 - page 59

Roland VA-76 - page 60

Roland VA-76 - page 61

Roland VA-76 - page 62

Roland VA-76 - page 63

Roland VA-76 - page 64

Roland VA-76 - page 65

Roland VA-76 - page 66

Roland VA-76 - page 67

Roland VA-76 - page 68

Roland VA-76 - page 69

Roland VA-76 - page 70

Roland VA-76 - page 71

Roland VA-76 - page 72

Roland VA-76 - page 73

Roland VA-76 - page 74

Roland VA-76 - page 75

Roland VA-76 - page 76

Roland VA-76 - page 77

Roland VA-76 - page 78